After bios update, lights come on, screen does not

I installed the only bios update on the dv9610us page, and now my laptop boots to a black screen. The hard drive has been wiped and windows 8 was installed, so no recovery partitions are there. I did take out the hard drive and get the bios backup that the bios installer made, but I have no idea how to get the backup restored without an hp_tools partition

Hi @josephsmendoza ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv9610us Notebook and issues with System recovery.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Here are some options available using HP Recovery Manager that might help you out.
Did you make a recovery disk for the Original OS?
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • When I open my lap top, the light on my screen does not turn on unless I press the top light key

    when I open my lap top, the light on my screen does not turn on unles I press the light key at the top above keyboard

    System Preference > Display  > Display tab
    Check the Brightness slider  and adjust it.

  • Maverick update now my login screen does not work please help.

    Hello hope you can help.  I have a 24 inch Mid 2007 Intel iMac.  It has been great until now.  I recently did the Maverick update and now my login screen does not work.  When I wake the computer up the screen appars with my picture icon.  When I click on it nothing happens.  If I click on it a second or third time the beach ball appears and nothing happens.  I have to shut the unit down with the power button and when the unit powers back up everything works normally.  Are there any suggestions out there?  I have updated the software without resolution. Is this computer too old?   Do I have to buy a new one?
    Thank you

    Your iMac can support Mavericks according to the requirements > OS X Mavericks: System Requirements
    Try a Safe Mode boot. That deletes some system caches that may help.
    Startup your Mac in Safe Mode
    A Safe Mode boot takes much longer than a normal boot so be patient.
    Once you are in Safe Mode, click Restart from the Apple () menu.
    See if there's an improvement for the login screen.

  • Pavilion g6t wont boot after bios update now just black screen please help!

     I downloaded an update for the bios for my pavilion g6t-1d00 laptop running windows 7 64 bit. It started acting kind of funny but I didnt think anything of it til I tried to boot it up the next day and all I got was a black screen and a orange led light on the f12 button for the internet and the caps lock button after blinking afew times started the dredded two times every couple of seconds. I tried the windows key+B key power key, no luck. I cant access anything because I have no monitor and I'm at my wits end. I refuse to wipe my hard drive and start over even if I could! I cant access hp tools or manager or anything, please someone has to have a solution!

    @Fuschia4me,
    1.       You will have to use another computer
    2.       Access the HP.com site with the BIOS updates available here is the link
    3.       You want to select the F.36 BIOS version
    4.       When you click on the update then click download and it will ask you to save or run, you want to save to a flash drive
    5.        Once done insert the flash drive into your laptop
    6.       Turn the computer on and press the windows and B key like before
    If the process doesn’t work the first time I would try at least 2 more times.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • FaceTime and Messages stopped working on my MacBook after I updated to Yosemite. Handoff does not work either. How can I fix this?

    Before I updated to Yosemite, I could FaceTime other people and Message other people with the MacBook Pro apps. However, after I updated to Yosemite, they stopped working. I get "not delivered" feedback on Messages, and "call failed" on FaceTime. I made sure that both have the correct emails checked and unchecked in the settings as my iPod, and made sure that the "make calls from" or "begin new conversations from" coincide with my handheld Apple media player.
    Am I not doing something? Am I doing something wrong?
    Any feedback would be appreciated!
    Thanks!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Bios update hung up, now system does not boot

    Hi,
    I just got my new system 2 says ago and installed a win 8.1 on it. My pc froze at random so I checked the website and saw that there was a bios update saying windows 8 users should update.
     I downloaded the file, ran it and it hung up in the middle, I left it for about an hour and it was still stuck there...I reset the pc and boom, it wont boot up. It just gives 2 consecutive beeps every 5-10 seconds or so. Is my mobo dead?  Please help! I JUST bought this case...
    EDIT:
    Sorry I was so upset that I even forgot to mention my mobo model:
    Mobo: 990FXA-GD80
    Bios version: I don't know!
    CPU: AMD 8350
    PSU: 630 thermaltake
    HDD: 1 TB seagate
    RAM: 8 gb kingstone
    VGA: Sapphire 280X

    msi have been told about Live update BIOS Updates being bad many times but they keep it in  !
    you have 3 options!
    1: have a shop that can do SPI BIOS flashes to direct flash the BIOS chip to revive the board!
    2: RMA it to MSI for them to re-flash the board!
    3: get a new board!
    1+2 or the cheapest routes to take! 3 is more expensive!
    (DO NOT USE LIVE UPDATE its dangerous as it does BIOS flashes in a uncontrolled environment (Windows) as there is other data and processes active) <-- if you do use live update just use the download function only and perform BIOS flashes in M-Flash, DOS or using the forum flasher as there much safer!

  • After recent updates my macbookpro builtin camera does not work on Firefox. How can I get it to work again?

    camera worked the day before - updates loaded Saturday evening. Sunday morning the camera doesn't work through Firefox. It works on other applications (iChat, Photobooth, etc) but not through Firefox.

    It works in FF4.0.1! "Right-click on a toolbar then choose "Customize". Look for the ruler icon in the popup that appears and drag it where ever you'd like it to appear. I put mine back at the top of my dev tool bar. Handy Little Tool!

  • T400 does not turn on after bios update.

    Hi there people,
    Sorry if this has been posted before,
    Basically done a bios update and now the laptop does not turn on, there is just a blank screen. Can hear fan/processor running but nothing else.
    Any help will be appreciated.
    Thank you.

    try taking out the ram, and restart the laptop without it, does it beep?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Satellite A660 - USB boot problems after BIOS update

    Hello,
    I own a Toshiba Satellite A660 and recently have update the BIOS to the latest version (1.80). Since then the notebook will freeze on the boot screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
    It works without the flash memory connected and also if I connect it after I enter the boot menu or the BIOS setup. I can even boot from it like this.
    As far as I am concerned this is a serious regression. Is there any way I can downgrade the BIOS version, or any other way to fix this issue ? I rely heavily on external USB drives.
    Regards,
    Claudiu.

    I too am having problems with my A660 since upgrading to 1.80 bios - the HDD/SD utility, the pc health monitor and half the other toshiba utilities no longer work because they can't recognize the bios and actually tell me this... I get an error message telling me ''can't get bios type''...
    On top of this I get the boot problem as well - I have to unplug half of my USB devices to get the laptop to boot properly...
    And now - one month into owning my new A660 - after a hard drive failure, a problem with the Broadcom internal wireless adaptor I now have the internal TV tuner no longer working and have no idea how to fix it...
    My gut feeling is that the sooner I can downgrade to the original factory bios the BETTER - and wait for another bios update to come along that is not faulty/buggy...
    HOPE someone can help me with this...
    John.

  • Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

    Hi.
    Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
    bios-20070709111839.zip
    After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
    I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
    What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
    Thanks in advance
    MAT

    > Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
    What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
    You could try to access the BIOS and try to set the settings to default.
    Dont forget to save the settings if you will exit the BIOS.
    But if this procedure does not help, you will have to contact the ASP in your country.
    Possibly the guys will try to flash the BIOS again with other special version.
    Good luck
    Greetings

  • Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

    Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
    I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
    Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
    I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
    I'm using Firefox 30.0 and Windows 7 (64 bit).
    Thanks.

    Hi moose53,
    Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
    If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

  • Satellite A series does not start up after BIOS update

    After bios update with downloaded utility my notebook does not start up.
    Did this case covered by warranty?

    Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
    PS: Did you try this workaround:
    - remove battery, disconnect the AC adaptor
    - wait ~ 40min
    - connect both devices again and try to power up the notebook

  • Samsung NP305V5A: Screen does not come back after resume

    The issue: screen does not turn ON when resuming from suspend-to-ram. PC fans start working. I can even "gently" reboot the notebook, by pressing <Ctrl>+<Alt>+<F1>, then <Ctrl>+<Alt>+<Del>. But the screen does not work..
    Note: resume worked with the Catalyst driver (but this blob has many other glitches...)
    $ lspci | grep VGA
    00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
    02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]
    Video driver: radeon
    Kernel parameters: root=/dev/sda2 rw radeon.dpm=1
    (note: radeon.dpm=1 helps a lot; before kernel v3.11 I could not use radeon at all)
    /etc/X11/xorg.conf.d/20-radeon.conf
    Section "Device"
    Identifier "Radeon"
    Driver "radeon"
    Option "ZaphodHeads" "VGA-0"
    Option "ColorTiling2D" "false"
    EndSection
    not sure if the following is usable, but still:
    $ lsmod | grep video
    uvcvideo 72900 0
    videobuf2_vmalloc 3280 1 uvcvideo
    videobuf2_memops 2343 1 videobuf2_vmalloc
    videobuf2_core 28027 1 uvcvideo
    videodev 111140 2 uvcvideo,videobuf2_core
    media 11751 2 uvcvideo,videodev
    i2c_core 24164 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
    video 11196 1 samsung_laptop
    usbcore 179880 6 uvcvideo,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid

    Hi moose53,
    Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
    If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

  • HP Model #A6000n Bios Checksum Error after Bios Update!!

    I performed the Bios update posted on Hp's website...After the re-boot, all I get is this error, "BIOS Checksum Error," and then the black screen looks for a bootable disk on floppy (this computer has none), then, it looks for a bootable disk on the CD drive.  Now, I have talked to HP support and they say I need to order the recovery disks.  Can someone send me a bootable file that I could burn to CD for this model machine and get it up and running??  I have an older machine here that would allow me to make a bootable CD but, I have no idea where to locate some kind of BIOS update and or, bootable file to flash the BIOS.  I am so mad that HP has wanted me to purchase this CD recovery program just to get back into Windows Vista.  But, I am not sure what to do since the BIOS update must have been corrupt when I flashed the ASUS motherboard.  This computer is my Aunts and she failed to make back up restore disks and now I am lost as to getting this thing up and running...Please help!!
    Thanks!
    This question was solved.
    View Solution.

    Like I said, if you have a floppy it is easy, especially since the computer doing the floppy is XP.OK, here we go.
    1) place floppy disk in drive
    2) open My Computer and right click on the floppy drive
    3) pick format from the menu that pops up
    4) put a check mark in the box next to the "Create an MS-DOS startup disk"
    5) click "Start"
    6) when completed copy the awdflash.exe to the floppy
    7) right click on the BIOS file from HP
    8) move the mouse cursor to 7-zip and then click on "open archive"
    9) double click on the folder icon in the new window
    10) right click on the ROM file - in this case 513.rom
    11) pick "copy to" from the menu and browse to the floppy
    12) when that is complete, the floppy should be ready to work
    13) Move the floppy and ribbon cable to the Vista computer.  It does not need to be mounted but make sure it is not touching anything metal ( a stake of books will do fine) and connect the ribbon cable and power to the Vista computer's motherboard and power supply (of course this is done with both of the computers off and unplugged)
    Now ready to go on the Vista computer. When the power button is pressed on the computer, there will be an HP splash screen come up.  From that screen press the "Enter BIOS" or "Boot setup" key as indicated.  Forgot to ask if this screen comes up in previous posts.  If this screen does not show then this is going to be much harder.
    When in the BIOS, look for boot order and then set it to boot from the floppy first.  Save choices to exit.
    14) Reboot - should end up with a flashing cursor in the top right corner
    15) type AWDFLASH 513.rom /py/sn/cc then hit Enter
    16) when and if it completes power down and remove the floppy drive from the computer
    That should do it.  If it does not work or there are problems come back with an explanation of what did happen.
    Of course, doing all this at your own risk.  I am just trying to help.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Laptop screen does not turn on after resume from suspend/hibernate

    I use systemctl suspend/hibernate to resume,  but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
    00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
    00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
    00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
    00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
    00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
    00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
    00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
    00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
    00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
    00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
    00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
    00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
    00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
    00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
    00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
    00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
    00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
    00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
    00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
    00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
    04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] tseg: 009ff00000
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF00000000 write-back
    [ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
    [ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
    [ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000023f000000 aka 9200M
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
    [ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
    [ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
    [ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
    [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
    [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
    [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
    [ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
    [ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
    [ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
    [ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
    [ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
    [ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] node 0: [mem 0x100001000-0x23effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
    [ 0.000000] On node 0 totalpages: 1960479
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10155 pages used for memmap
    [ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20416 pages used for memmap
    [ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
    [ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1397.380 MHz processor
    [ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
    [ 0.000046] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20141107
    [ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
    [ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
    [ 0.015021] ACPI: All ACPI Tables successfully acquired
    [ 0.016280] Security Framework initialized
    [ 0.016286] Yama: becoming mindful.
    [ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020472] Initializing cgroup subsys memory
    [ 0.020479] Initializing cgroup subsys devices
    [ 0.020482] Initializing cgroup subsys freezer
    [ 0.020484] Initializing cgroup subsys net_cls
    [ 0.020487] Initializing cgroup subsys blkio
    [ 0.020510] CPU: Physical Processor ID: 0
    [ 0.020511] CPU: Processor Core ID: 0
    [ 0.020513] mce: CPU supports 6 MCE banks
    [ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
    [ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.021880] ftrace: allocating 21166 entries in 83 pages
    [ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
    [ 0.174081] Performance Events: AMD PMU driver.
    [ 0.174086] ... version: 0
    [ 0.174087] ... bit width: 48
    [ 0.174088] ... generic registers: 4
    [ 0.174089] ... value mask: 0000ffffffffffff
    [ 0.174090] ... max period: 00007fffffffffff
    [ 0.174091] ... fixed-purpose events: 0
    [ 0.174092] ... event mask: 000000000000000f
    [ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.197738] x86: Booting SMP configuration:
    [ 0.197744] .... node #0, CPUs: #1 #2 #3
    [ 0.250891] x86: Booted up 1 node, 4 CPUs
    [ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
    [ 0.252264] devtmpfs: initialized
    [ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
    [ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
    [ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
    [ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
    [ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
    [ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
    [ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
    [ 0.258125] pinctrl core: initialized pinctrl subsystem
    [ 0.258173] RTC time: 18:50:52, date: 02/22/15
    [ 0.258343] NET: Registered protocol family 16
    [ 0.270952] cpuidle: using governor ladder
    [ 0.284279] cpuidle: using governor menu
    [ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.284493] ACPI: bus type PCI registered
    [ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.285035] PCI: Using configuration type 1 for base access
    [ 0.299021] ACPI: Added _OSI(Module Device)
    [ 0.299025] ACPI: Added _OSI(Processor Device)
    [ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.831121] ACPI: Interpreter enabled
    [ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
    [ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.831167] ACPI: (supports S0 S3 S4 S5)
    [ 0.831169] ACPI: Using IOAPIC for interrupt routing
    [ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.843782] PCI host bridge to bus 0000:00
    [ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
    [ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
    [ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
    [ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
    [ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
    [ 0.844070] pci 0000:00:01.0: supports D1 D2
    [ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
    [ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
    [ 0.844272] pci 0000:00:01.1: supports D1 D2
    [ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
    [ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
    [ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
    [ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
    [ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
    [ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
    [ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
    [ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
    [ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
    [ 0.845242] pci 0000:00:12.2: supports D1 D2
    [ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
    [ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
    [ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
    [ 0.845727] pci 0000:00:13.2: supports D1 D2
    [ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
    [ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
    [ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
    [ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
    [ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
    [ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
    [ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
    [ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
    [ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
    [ 0.846982] pci 0000:00:15.0: supports D1 D2
    [ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
    [ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
    [ 0.847225] pci 0000:00:15.1: supports D1 D2
    [ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
    [ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
    [ 0.847466] pci 0000:00:15.2: supports D1 D2
    [ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
    [ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
    [ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
    [ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
    [ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
    [ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
    [ 0.847956] pci 0000:00:16.2: supports D1 D2
    [ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
    [ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
    [ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
    [ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
    [ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
    [ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
    [ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
    [ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
    [ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
    [ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
    [ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
    [ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
    [ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
    [ 0.849834] pci 0000:04:00.0: supports D1 D2
    [ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.854860] pci 0000:05:00.0: supports D1 D2
    [ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
    [ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
    [ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
    [ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
    [ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
    [ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
    [ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
    [ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
    [ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
    [ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
    [ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
    [ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
    [ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
    [ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
    [ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
    [ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
    [ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
    [ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
    [ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
    [ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
    [ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
    [ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
    [ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
    [ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
    [ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
    [ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
    [ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
    [ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
    [ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
    [ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
    [ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
    [ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
    [ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
    [ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
    [ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.864464] vgaarb: loaded
    [ 0.864466] vgaarb: bridge control possible 0000:00:01.0
    [ 0.864788] PCI: Using ACPI for IRQ routing
    [ 0.874741] PCI: pci_cache_line_size set to 64 bytes
    [ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
    [ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
    [ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
    [ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
    [ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
    [ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
    [ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
    [ 0.875079] NetLabel: Initializing
    [ 0.875081] NetLabel: domain hash size = 128
    [ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.875101] NetLabel: unlabeled traffic allowed by default
    [ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.877246] Switched to clocksource hpet
    [ 0.884868] pnp: PnP ACPI init
    [ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.886021] system 00:01: [io 0x040b] has been reserved
    [ 0.886025] system 00:01: [io 0x04d6] has been reserved
    [ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.886032] system 00:01: [io 0x0c14] has been reserved
    [ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
    [ 0.886039] system 00:01: [io 0x0c52] has been reserved
    [ 0.886042] system 00:01: [io 0x0c6c] has been reserved
    [ 0.886046] system 00:01: [io 0x0c6f] has been reserved
    [ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
    [ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
    [ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
    [ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
    [ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
    [ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
    [ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
    [ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
    [ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
    [ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.887277] pnp: PnP ACPI: found 9 devices
    [ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
    [ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
    [ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
    [ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
    [ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
    [ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
    [ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
    [ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
    [ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
    [ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
    [ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896259] NET: Registered protocol family 2
    [ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.897360] TCP: reno registered
    [ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897618] NET: Registered protocol family 1
    [ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
    [ 1.838171] PCI: CLS 64 bytes, default 64
    [ 1.838242] Unpacking initramfs...
    [ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
    [ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
    [ 1.934495] microcode: CPU0: patch_level=0x03000014
    [ 1.934537] microcode: CPU1: patch_level=0x03000014
    [ 1.934580] microcode: CPU2: patch_level=0x03000014
    [ 1.934625] microcode: CPU3: patch_level=0x03000014
    [ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.934766] LVT offset 0 assigned for vector 0x400
    [ 1.934817] perf: AMD IBS detected (0x000000ff)
    [ 1.934854] Scanning for low memory corruption every 60 seconds
    [ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.935315] Initialise system trusted keyring
    [ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.937285] zpool: loaded
    [ 1.937288] zbud: loaded
    [ 1.937658] VFS: Disk quotas dquot_6.5.2
    [ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.937948] Key type big_key registered
    [ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.938508] io scheduler noop registered
    [ 1.938511] io scheduler deadline registered
    [ 1.938546] io scheduler cfq registered (default)
    [ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
    [ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
    [ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
    [ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
    [ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
    [ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
    [ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
    [ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
    [ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
    [ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
    [ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
    [ 1.939552] vesafb: scrolling: redraw
    [ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
    [ 1.955978] Console: switching to colour frame buffer device 144x54
    [ 1.972261] fb0: VESA VGA frame buffer device
    [ 1.972328] GHES: HEST is not enabled!
    [ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.973720] Linux agpgart interface v0.103
    [ 1.973797] rtc_cmos 00:02: RTC can wake from S4
    [ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.974434] TCP: cubic registered
    [ 1.974593] NET: Registered protocol family 10
    [ 1.975020] NET: Registered protocol family 17
    [ 1.975476] Loading compiled-in X.509 certificates
    [ 1.975502] registered taskstats version 1
    [ 1.976231] Magic number: 3:326:848
    [ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
    [ 1.976444] PM: Hibernation image not present or could not be loaded.
    [ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 1.977027] Write protecting the kernel read-only data: 8192k
    [ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 1.979659] random: systemd urandom read with 1 bits of entropy available
    [ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.980576] systemd[1]: Detected architecture 'x86-64'.
    [ 1.980581] systemd[1]: Running in initial RAM disk.
    [ 1.980590] systemd[1]: Running with unpopulated /etc.
    [ 1.980603] systemd[1]: No hostname configured.
    [ 1.980609] systemd[1]: Set hostname to <localhost>.
    [ 1.980655] systemd[1]: Initializing machine ID from random generator.
    [ 1.996373] systemd[1]: Populated /etc with preset unit settings.
    [ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
    [ 2.003390] systemd[1]: Created slice -.slice.
    [ 2.003412] systemd[1]: Starting -.slice.
    [ 2.005054] systemd[1]: Listening on Journal Audit Socket.
    [ 2.005188] systemd[1]: Created slice system.slice.
    [ 2.005200] systemd[1]: Starting system.slice.
    [ 2.005218] systemd[1]: Reached target Swap.
    [ 2.005226] systemd[1]: Starting Swap.
    [ 2.005288] systemd[1]: Listening on udev Control Socket.
    [ 2.005296] systemd[1]: Starting udev Control Socket.
    [ 2.005312] systemd[1]: Reached target Slices.
    [ 2.005320] systemd[1]: Starting Slices.
    [ 2.005335] systemd[1]: Reached target Local File Systems.
    [ 2.005342] systemd[1]: Starting Local File Systems.
    [ 2.005358] systemd[1]: Reached target Timers.
    [ 2.005366] systemd[1]: Starting Timers.
    [ 2.005398] systemd[1]: Listening on udev Kernel Socket.
    [ 2.005409] systemd[1]: Starting udev Kernel Socket.
    [ 2.005430] systemd[1]: Reached target Paths.
    [ 2.005441] systemd[1]: Starting Paths.
    [ 2.005497] systemd[1]: Listening on Journal Socket.
    [ 2.005510] systemd[1]: Starting Journal Socket.
    [ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
    [ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
    [ 2.007428] systemd[1]: Starting Journal Service...
    [ 2.007472] systemd[1]: Reached target Sockets.
    [ 2.007494] systemd[1]: Starting Sockets.
    [ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
    [ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
    [ 2.021212] systemd[1]: Started udev Kernel Device Manager.
    [ 2.024169] systemd[1]: Started udev Coldplug all Devices.
    [ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.041719] SCSI subsystem initialized
    [ 2.042505] ACPI: bus type USB registered
    [ 2.042538] usbcore: registered new interface driver usbfs
    [ 2.042552] usbcore: registered new interface driver hub
    [ 2.042588] usbcore: registered new device driver usb
    [ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.045154] systemd[1]: Started Journal Service.
    [ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.045840] ohci-pci: OHCI PCI platform driver
    [ 2.045993] QUIRK: Enable AMD PLL fix
    [ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
    [ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
    [ 2.046697] ehci-pci: EHCI PCI platform driver
    [ 2.047833] libata version 3.00 loaded.
    [ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.102273] hub 1-0:1.0: USB hub found
    [ 2.102287] hub 1-0:1.0: 5 ports detected
    [ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
    [ 2.159071] hub 2-0:1.0: USB hub found
    [ 2.159085] hub 2-0:1.0: 5 ports detected
    [ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
    [ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
    [ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
    [ 2.215699] hub 3-0:1.0: USB hub found
    [ 2.215713] hub 3-0:1.0: 4 ports detected
    [ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
    [ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.271523] ehci-pci 0000:00:12.2: debug port 1
    [ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
    [ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 2.281694] hub 4-0:1.0: USB hub found
    [ 2.281705] hub 4-0:1.0: 5 ports detected
    [ 2.338086] hub 1-0:1.0: USB hub found
    [ 2.338100] hub 1-0:1.0: 5 ports detected
    [ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
    [ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.338596] ehci-pci 0000:00:13.2: debug port 1
    [ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
    [ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 2.348396] hub 5-0:1.0: USB hub found
    [ 2.348414] hub 5-0:1.0: 5 ports detected
    [ 2.404806] hub 2-0:1.0: USB hub found
    [ 2.404820] hub 2-0:1.0: 5 ports detected
    [ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
    [ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
    [ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.461571] ehci-pci 0000:00:16.2: debug port 1
    [ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
    [ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 2.471768] hub 6-0:1.0: USB hub found
    [ 2.471780] hub 6-0:1.0: 4 ports detected
    [ 2.528139] hub 3-0:1.0: USB hub found
    [ 2.528154] hub 3-0:1.0: 4 ports detected
    [ 2.528415] ahci 0000:00:11.0: version 3.0
    [ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 2.529180] scsi host0: ahci
    [ 2.529664] scsi host1: ahci
    [ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
    [ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
    [ 2.530551] scsi host2: pata_atiixp
    [ 2.530815] scsi host3: pata_atiixp
    [ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
    [ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
    [ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
    [ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
    [ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
    [ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
    [ 3.017307] ata1.00: configured for UDMA/133
    [ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
    [ 3.019278] ata2.00: configured for UDMA/100
    [ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
    [ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.084075] sda: sda1 sda2 sda3
    [ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 3.528901] XFS (sda1): Mounting V4 Filesystem
    [ 3.710527] XFS (sda1): Ending clean mount
    [ 3.935255] Switched to clocksource tsc
    [ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
    [ 4.799287] random: nonblocking pool is initialized
    [ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
    [ 7.417234] ACPI: acpi_idle registered with cpuidle
    [ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
    [ 7.544509] wmi: Mapper loaded
    [ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 7.626522] acpi device:2b: registered as cooling_device4
    [ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
    [ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
    [ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
    [ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
    [ 7.746486] ACPI: Lid Switch [LID]
    [ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 7.746725] ACPI: Power Button [SLPB]
    [ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 7.746880] ACPI: Power Button [PWRF]
    [ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.749951] ACPI: AC Adapter [AC0] (on-line)
    [ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 8.061752] [drm] Initialized drm 1.1.0 20060810
    [ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
    [ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
    [ 8.363138] kvm: Nested Virtualization enabled
    [ 8.363151] kvm: Nested Paging enabled
    [ 8.704039] [drm] radeon kernel modesetting enabled.
    [ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
    [ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 8.832364] AMD IOMMUv2 functionality not available on this system
    [ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
    [ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
    [ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
    [ 9.031523] media: Linux media interface: v0.10
    [ 9.102014] CRAT table not found
    [ 9.102024] Finished initializing topology ret=0
    [ 9.102177] kfd kfd: Initialized module
    [ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
    [ 9.102951] fb: switching to radeondrmfb from VESA VGA
    [ 9.103002] Console: switching to colour dummy device 80x25
    [ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
    [ 9.104059] [drm] register mmio base: 0xFEB00000
    [ 9.104063] [drm] register mmio size: 262144
    [ 9.104144] ATOM BIOS: Toshiba
    [ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
    [ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 9.104235] [drm] RAM width 32bits DDR
    [ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
    [ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 9.104394] [TTM] Initializing pool allocator
    [ 9.104407] [TTM] Initializing DMA pool allocator
    [ 9.104455] [drm] radeon: 512M of VRAM memory ready
    [ 9.104459] [drm] radeon: 1024M of GTT memory ready.
    [ 9.104497] [drm] Loading SUMO Microcode
    [ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
    [ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
    [ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
    [ 9.170455] Linux video capture interface: v2.00
    [ 9.179293] mousedev: PS/2 mouse device common for all mice
    [ 9.223473] [drm] Internal thermal controller without fan control
    [ 9.223622] [drm] Found smc ucode version: 0x00011200
    [ 9.223730] [drm] radeon: dpm initialized
    [ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 9.282345] radeon 0000:00:01.0: WB enabled
    [ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
    [ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
    [ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 9.283082] [drm] Driver supports precise vblank timestamp query.
    [ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
    [ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
    [ 9.283145] [drm] radeon: irq initialized.
    [ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 9.298931] rtlwifi: rtlwifi: wireless switch is on
    [ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
    [ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
    [ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
    [ 9.307058] sound hdaudioC0D2: inputs:
    [ 9.307061] sound hdaudioC0D2: Mic=0x18
    [ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
    [ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
    [ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
    [ 9.369840] [drm] UVD initialized successfully.
    [ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
    [ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
    [ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
    [ 9.789309] usbcore: registered new interface driver uvcvideo
    [ 9.789319] USB Video Class driver (1.1.1)
    [ 9.871399] cfg80211: World regulatory domain updated:
    [ 9.871412] cfg80211: DFS Master region: unset
    [ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [ 9.890507] [drm] ib test on ring 5 succeeded
    [ 9.911771] [drm] radeon atom DIG backlight initialized
    [ 9.911776] [drm] Radeon Display Connectors
    [ 9.911777] [drm] Connector 0:
    [ 9.911779] [drm] VGA-1
    [ 9.911780] [drm] HPD2
    [ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 9.911783] [drm] Encoders:
    [ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
    [ 9.911786] [drm] CRT1: NUTMEG
    [ 9.911787] [drm] Connector 1:
    [ 9.911788] [drm] LVDS-1
    [ 9.911789] [drm] HPD1
    [ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 9.911791] [drm] Encoders:
    [ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
    [ 9.911793] [drm] LCD1: TRAVIS
    [ 9.911794] [drm] Connector 2:
    [ 9.911795] [drm] HDMI-A-1
    [ 9.911796] [drm] HPD5
    [ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 9.911799] [drm] Encoders:
    [ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
    [ 10.016569] [drm] fb mappable at 0xC0478000
    [ 10.016576] [drm] vram apper at 0xC0000000
    [ 10.016578] [drm] size 5787648
    [ 10.016580] [drm] fb depth is 24
    [ 10.016582] [drm] pitch is 6400
    [ 10.016970] fbcon: radeondrmfb (fb0) is primary device
    [ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
    [ 10.143532] Console: switching to colour frame buffer device 200x56
    [ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
    [ 10.150312] radeon 0000:00:01.0: registered panic notifier
    [ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
    [ 10.194853] cfg80211: Calling CRDA for country: US
    [ 10.231380] cfg80211: Regulatory domain changed to country: US
    [ 10.231393] cfg80211: DFS Master region: FCC
    [ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
    [ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
    [ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
    [ 10.422003] XFS (sda3): Mounting V5 Filesystem
    [ 10.837256] XFS (sda3): Ending clean mount
    [ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
    [ 11.195453] microcode: CPU0: new patch_level=0x03000027
    [ 11.195496] microcode: CPU1: new patch_level=0x03000027
    [ 11.195601] microcode: CPU2: new patch_level=0x03000027
    [ 11.195693] microcode: CPU3: new patch_level=0x03000027
    [ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
    [ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
    [ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.753012] wlp4s0: authenticated
    [ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
    [ 13.758283] wlp4s0: associated
    [ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
    [ 23.961417] PM: Syncing filesystems ... done.
    [ 24.305227] PM: Preparing system for mem sleep
    [ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 24.311542] PM: Entering mem sleep
    [ 24.311898] Suspending console(s) (use no_console_suspend to debug)
    [ 24.320753] wlp4s0: deauthenticating f

    Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
    Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
    Try a different graphics driver
    Tweak the driver module parameters or build your own driver.
    Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

Maybe you are looking for

  • Perfomance of oracle report

    Hi, I am working on a oracle report. the report performance is very slow. Based on the requirement i have designed my data model in such a way that i used many formula columns & summary columns... Can some let me know how to tune the report. and incr

  • How do you turn off the auto info?

    I'm an audiophile and I'm very specific about what genres, albums, etc my music is listed under. iTunes automatic music info feature keeps changing the genres, and occasionally albums, whenever I select a song. How do I turn off this feature?

  • How to find SQL Statement fired using SYS.AUD$ - Database Auditing

    Dear Friends I am having Oracle 9i Database and have configured it with database auditing option by setting the following parameter in init.ora file AUDIT_TRAIL = "DB" I want to audit SELECT, INSERT , UPDATE and DELETE operations on PRACTICE.EMP tabl

  • Invoices FI

    Hi   How can i cleared invoices in FI that been sent from SD. Many thanks Charles

  • HCM Process and Forms - Create and End record using the same form scenario

    Hi All, I have the following requirement while using HCM Processes and Forms: Using one form/scenario I need to both create a record or be able to end a record for infotype 841. When looking at the back-end service SAP_PA I have operations Create, Ch