After bios update, will not boot, says install an operating system

I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

jwess wrote:
I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

Similar Messages

After software update, will not boot up past blue screen

I just did a software update and after restarting, the computer will not go past the blue screen with the spinning wheel at the bottom. Please help! I've tried everything under troubleshooting in the manual. Any other ideas?

Thanks, I was able to fix my problem. It was a software issue. Luckily I did a pretty good backup...I just forgot to back up 2 of my most used applications: iPhoto and Appleworks. They were on my laptop before I did the erase and install, and now they are gone. I thought they would be on the iBook install discs or the OSx software install disc...but no. They had to come from somewhere and I just cannot find them! I know I didn't pay for them. Any thoughts on where they may be? I am so mentally exhausted from these computer woes...I can't think anymore!!! Please help me!

I-phone 4 froze after an update, will not shut down and sends all calls to voicemail. Apple logo is the only screen that I get, is there anything I can do?

I-PHONE 4 FROZE AFTER AN UPDATE, WILL NOT SHUT DOWN AND SENDS ALL CALLS TO VOICEMAIL, IS THERE ANYTHING I CAN DO?

Unplug it and let unit go dead. Then hold your Home button down and plug the USB power cord back in. iTunes should see it and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Will Not Boot from Install Disc & 4SNS/1/40000000: TG0D - Thermal Sensor?

*Will Not Boot from Install Disc*
I used the "option key" approach with the gray start up disk. At first it ejected the start up disk. Then I nudged the disk back in the machine and it showed on the screen as an option. I clicked on the start up disk image and it finally loaded.
But, it won't accept the start up disk when holding down the "C" key at restart.
*4SNS/1/40000000: TG0D*
I did an Apple Hardware Test and received the following diagnostic:
Version: 3A121
Test Suite: Extended Test
Loop Count: 2
Result: Failed
Failure code: 4SNS/1/40000000: TG0D
*Thermal Sensor*
A search for the failure code 4SNS/1/40000000: TG0D brought up an Apple Discussion topic entry stating: That error code indicates a problem with a thermal sensor. It could be not working or possibly not connected. You will need to take it to Apple for repair.
Would a thermal sensor have anything to do with it not starting up when holding down the "C" key at restart? What are thermal sensor problem symptoms?
*User File Folder Opened Up*
The machine also starts up with my user file folder opened up rather than with a blank screen as it normally should
I completed a DiskWarrior rebuild on the disk and verify disk shows it is fine.
Any suggestions on what to do next with these issues?

The answer was in your post: "You will need to take it to Apple for repair."

My lap top says boot device not found please install an operating system on your hard disk

I was on yahoo and page froze. I hit alt/ctrl/delete and nothing happened. I then hit ctrl/esc. I now have a screen saying boot device not found. please install an operating system on your hard disk. hard disk (3FO) What did I do wrong? this is a Compaq presario CQ56-112 NR Notebook Windows 7
This question was solved.
View Solution.

I would suggest going to the following link and going through the listed troubleshooting steps based on your symptoms:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)

Hey
i am having this Error Message "Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)", While UEFI mode is enabled from bois but in Raid menu Both my hard Drives 1TB and SSD are Showing and I run the F2 System Diagnostics Test and it became as passed. In UEFI mode its not even showing my USB when i attach it for Window install But when i enabled the Leglacy mode it detteced my USB and also let me install my Windows and every thing seems to work fine. Updated the bios still Error is there.
Error Message only shows up when I disable the Leglacy mode.
So where is the Problem ? hard drive seems fine because these are working on Leglacy mode enabled.
Laptop Model : HP Envy Dv6-7211tx
Hard Drive : 1Tb and 32GB SSD

Hi Saifullay, sorry to hear that you are having issue with your Envy Dv6-7211tx. I have done some research and I have found a document that will assist you with this issues. Please click the link that I have provided to get to the document. http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443463
If this does not resolve the issue, please feel free to write back . I would like to also apologize for the delay and the inconvenience that you have had to deal with.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Boot device not found - Please install an operating system on your hard disk

Trying to boot up this morning gave this error message:
"Boot device not found
Please install an operating system on your hard disk
Hard Disk <3F0>
F2 System Diagnostics"
Pressing F2 brings up to the "HP PC Hardware Diagnostics UEFI" page, where its shown:
"Version 1.6.0.0 - BIOS
Fore more info please visit www. ... ...
Memory Test
Hard Drive Check
Language
Exit"
Tryied the HD check but it says:
"SMART Check : Not installed
Short DST : Not installed
More details:
No bios upgrade was made, never, only a big updating of Windows yesterday.
Could someone kindely help me out please?
Thanks, Perry G.

Hi,
The above error message shows that the Hard disk drive is failed on your unit. You have to replace the Hard disk drive and reinstall the OS.
To order parts click the below link
https://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=FA59F7C7DCAC4237B498C91D0507A761
To order Recovery disk click below link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system

My Duaghter is out of the country studing abroad. Her PC would no longer boot up so she took it to a support shop. They replaced her hard drive, fixed an over heating issue and reloaded her PC. Now she is getting this new error message and she is desparate to get this fixed. We have owned this PC for only 2 years. I am sure it is out of support.
HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system on your hard disk.
She took it back to the support shop and they upgraded her bios, but that did not fix the error message.
Please help! What can she do now.

Hi:
Normally that means the hard drive failed.
I know it was replaced but maybe the replacement drive went out too.
There is a hard drive diagostics tool your daughter can run in the BIOS.
I suggest she run it (enter the BIOS by tapping the F10 key as soon as she sees the HP welcome screen).
Then once in the BIOS, there should be a diagnostics menu..one for memory and one for the hard drive.
She should select the hard drive diagnostics application and see what it reports.
Then go from there based on what is reported.
Paul

"boot device not found. please install an operating system on your hard disk error on Dm3 1030us

Hi
I have the following computer:
name: hp pavilion Dm3 1030us
serial number: {Removed for privacy}
product number: VM073UA#ABA
when i boot up my laptop it says "boot device not found. please install an operating system on your hard disk."
this laptop does not have a cd drive but I do have a external one. since it does not have a cd drive therefore they didnt give me a recovery cd.
It had Windows 7 on it.
Is there a way to get the issue resolved

You would have to call in to HP tech support ( 1-800-HP-INVENT) and have them order you some RCD's.
I work for HP.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

Bios update will not install

The HP assistant tells me there is an important bios update, I have downloaded and installed this several times, it still tells me the same update is needed. There have been no error messages. SSID 2AF7 VERSION 80.20APL SP 70148
i AM AT 2AF7 1.04 80.18

Hello @bc61,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your desktop computer is not able to successfully install a BIOS update prompted by the HP Support Assistant, and I would be happy to assist you in this matter!
To prevent the update prompt from reappearing in the future, I recommend following the steps in this document on Updating the BIOS. If the message continues to appear, I suggest disregarding the notification.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Macbook Pro will not load OS and will not boot from Install Disk

When I try to turn on my macbook pro it goes to the gray logo screen with the spinning gear however it does not progress from there and then after several minutes it proceeds to restart itself and the same process repeats itself. I have tried to boot into single user mode with success and have run /sbin/fsck -fy and that has returned that the volume appears to be ok. However, when I hit reboot it returns to the same process of the gray screen and spinning gear to black screen which repeats. When I boot into verbose mode it progresses to AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328 then it stalls for several minutes and then it shows continuing
synchronizing disks... Killing processes
then it says some other stuff to fast to read.
When I try to boot from the install disk it will not boot from holding the c key it goes through the same aforementioned cycle. When using option to boot I can see the Disk then when I select it the cycle happens again.
Also I have XP installed and I am able to boot into that successfully. Any help would be greatly appreciated.
Not sure if I left anything out
-bryce

Welcome to Apple Discussions.
Do you have multiple Accounts defined on that system? The last time you successfully were running, did you run from the Account with Administrator privileges?
Do you have another computer from which you could boot and connect the Macbook Pro in Target Disk Mode to take a look at the drive from your working machine? Perhaps you can run Disk Utility from the working machine and point to the hard disk on the failing Macbook Pro.
Message was edited by: Rick Lang

Wiped macbook pro will not boot from install DVD

I recently purchased an older MacBook Pro that came with the OS system wiped but it did have the original Install DVDs. The computer will not boot from the DVD. I have booted holding down the C key and nothing happens. I have booted holding down the Option key and it shows the Install DVD and I select this and nothing happens.
How do I get it to open up the Utilities from the DVD to install the operating system?

It could be a problem with the optical drive, but also may be due to the DVD's being for a different model.
Exactly which MBP do you have, and what serial numbers are on the discs ?.

MacBook crashed during update - will not boot

My wife was using iTunes and was prompted to do seven updates on our MacBook. She was told to hold in the power button during the update, and the machine reset.
Now the machine will not boot and just accesses the CD/DVD drive over and over.
Does anyone here have any ideas?

Alright, I was able to fix it.
I had to download the Firmware Restoration image for Intel based MacBooks onto my Windows XP machine. I then used a demo of the program 'UltraISO' to burn the .dmg image.
The macbook was turned on, the disc inserted. Then the macbook was powered off, and powered back on. This time I held in the power button until the long tone and gray screen appeared.
The folks at the Apple Store had no other suggestion other than paying $183 for AppleCare. They need to spend less time telling customers how reliable Macs are and a little more time burning copies of this restoration disc!

BOOT DEVICE NOT FOUND - PLEASE INSTALL AN OPERATING SYSTEM ON YOUR HARD DRIVE

HP G6-2212SA LAPTOP ( 2 YEARS OLD) BLACK - WINDOWS 8
I HAVE RUN THE MEMORY TEST PASSED
RUN THE HARD DISK QUICK CHECK - PASSED
RUN HARD DISK EXTENSIVE TEST - PASSED
I HAVE BOUGHT A NEW HARD DRIVE, INSTALLED IT AND RUN ALL THE SAME TESTS WITH ALL THE SAME PASSED RESULTS. I BELIEVE THAT THE PROBLEM IS NOT THE HARD DRIVE, SO I HAVE TAKEN THE NEW ONE OUT AND PUT THE OLD ONE BACK IN, AND HOPEFULLY BE ABLE TO GET A REFUND IF I SEND IT BACK.
I HAVE FOLL0WED INSTRUCTIONS ON THIS FORUM TRIED MOST THINGS STILL GET THE SAME MESSAGE.
I HAVE BOUGHT A WINDOWS 8 RECOVERY DISK OFF EBAY, TRIED IT SEVERAL TIMES AND DIFFERENT WAYS BUT WILL NOT LOAD UP
PLEASE HELP AND ADVISE AS IM IN A DELEMA
DARREN

Hi @Darren104
Welcome to the HP Support Community. I saw your post regarding the Boot Device not Found error message. This HP document Resolve Boot Device not Found Error Message will show you how to reset your BIOS. This will force the BIOS the look at the hardware and it might see your new hard drive. Another reason that it might not be seeing the hard drive is because there is no bootable operating system on the hard drive. You might need to look at taking it out and installing an operating system on it via another computer.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Macbook Pro will not boot beyond grey screen. System freezes.

My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.) I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists. When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?"
Any ideas how to fix this without doing an Archive & Install?
I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them.
Any help gratefully received. Many thanks.

jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them...
Archive and Install just affects the System files, so any apps you have should still be available afterwards. The Installer on the disk that came with your Mac, when you bought it, will tell you this before you proceed. Of course, you can always back out of the Installer if you feel chicken.
Notwithstanding it is still necessary to backup everything. You need to check that Time Machine is set to also backup your Applications folder. It might be set not to do this.
It may not be necessary to worry about this if you have the original installer disc(s). I think any stuff downloaded from iTunes etc can be re-downloaded. However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space. It's bound to be quicker than re-downloading the stuff plus any updates. And of course there's those Apps that you have but forgotten about. What about them?

After bios update, will not boot, says install an operating system

Similar Messages

Maybe you are looking for