After Boot Camp installation, Kernel Panic when launching OSX partition

Hey guys. I have a mac mini (early 2009) with Mac OSX 10.6.2 running. I installed XP Professional Sp3 using the Boot Camp Assistant with no errors. It works fine. However, whenever I launch the OSX partition, even in single-user mode, it Kernel Panics. What can I do to stop this?
I have a legal copy of XP and OSX, by the way.

this does not sound like a problem with anything on your drive then but rather a firmware issue. just to make sure, how are you booting from the DVD? reboot and hold "c" at the chime. any luck? if not reboot and hold option at the chime. this ought to boot you into startup disk manager where you can choose what to boot from.

Similar Messages

Kernel Panic when launching safari OS X mavericks

Hello, i would really appreciate your input guys. Sometimes I am getting kernel panics when i launch safari, this occurs mostly when i turn mac on and then launch the safari, when i launch something else it wont happen. I already tried verifying disk and I also clean installed Mavericks. Any advice is welcome. Thanks!
Here`s the log:
Anonymous UUID:       CB452275-9E8D-97A4-A782-209B3FC6FA76
Fri Jun 13 09:59:33 2014
panic(cpu 0 caller 0xffffff7f9e19af7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00070000: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8137ecc000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.5.26/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff8126ea2580 : 0xffffff801be22fa9
0xffffff8126ea2600 : 0xffffff7f9e19af7c
0xffffff8126ea26d0 : 0xffffff7f9c825e7b
0xffffff8126ea2790 : 0xffffff7f9c8ef46a
0xffffff8126ea27d0 : 0xffffff7f9ca70b2e
0xffffff8126ea2820 : 0xffffff7f9cae26e0
0xffffff8126ea2aa0 : 0xffffff7f9cae0fa9
0xffffff8126ea2c40 : 0xffffff7f9c8ca4ef
0xffffff8126ea2cd0 : 0xffffff7f9c7fbf8e
0xffffff8126ea2e00 : 0xffffff7f9c801e3a
0xffffff8126ea2ec0 : 0xffffff7f9c82a937
0xffffff8126ea30c0 : 0xffffff7f9c82c443
0xffffff8126ea31b0 : 0xffffff7f9d7d2747
0xffffff8126ea3240 : 0xffffff7f9d7d297b
0xffffff8126ea3260 : 0xffffff7f9d7cfb77
0xffffff8126ea34a0 : 0xffffff7f9d7c9358
0xffffff8126ea3610 : 0xffffff7f9d7c8d26
0xffffff8126ea3640 : 0xffffff7f9d7caedc
0xffffff8126ea3680 : 0xffffff7f9d7ca854
0xffffff8126ea3700 : 0xffffff7f9d7ca59c
0xffffff8126ea3780 : 0xffffff7f9d7b2ae0
0xffffff8126ea37e0 : 0xffffff7f9d7b33da
0xffffff8126ea3830 : 0xffffff7f9d7b3807
0xffffff8126ea38a0 : 0xffffff7f9d7b3fc8
0xffffff8126ea38e0 : 0xffffff7f9d780fea
0xffffff8126ea3a60 : 0xffffff7f9d7b0940
0xffffff8126ea3b20 : 0xffffff7f9d77fad9
0xffffff8126ea3b70 : 0xffffff801c2cea56
0xffffff8126ea3b90 : 0xffffff801c2d0051
0xffffff8126ea3bf0 : 0xffffff801c2cdabf
0xffffff8126ea3d40 : 0xffffff801beb66a8
0xffffff8126ea3e50 : 0xffffff801be26bf1
0xffffff8126ea3e80 : 0xffffff801be139f5
0xffffff8126ea3ef0 : 0xffffff801be1e043
0xffffff8126ea3f70 : 0xffffff801bec989d
0xffffff8126ea3fb0 : 0xffffff801bef3c76
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.5.26)[B67CD59F-1344-37BC-8A9A-46D6D3DCA13D]@ 0xffffff7f9e18c000->0xffffff7f9e19ffff
            dependency: com.apple.driver.AppleGraphicsControl(3.5.26)[C0F9A79F-167E-3A68-873C-5CE17B97F B11]@0xffffff7f9e184000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9c72b000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f9c783000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f9e187000
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f9c7d6000->0xffffff7f9ca3efff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f9c7c6000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f9c783000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9ca49000->0xffffff7f9ccf2fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f9c7d6000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
         com.apple.GeForceTesla(8.2.4)[24ED915E-02F3-3A31-8502-6AA41FFCA420]@0xffffff7f9 d76e000->0xffffff7f9d838fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f9c4be000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f9c7c6000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f9c783000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f9c7d6000
BSD process name corresponding to current thread: com.apple.WebKit
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide:     0x000000001bc00000
Kernel text base: 0xffffff801be00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 109308043883
last loaded kext at 6217964049: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f9ded7000, size 36864)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.4f1
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.14.15
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleMikeyDriver          2.6.1f2
com.apple.driver.AppleHDAHardwareConfigDriver          2.6.1f2
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleHDA          2.6.1f2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleIntelHDGraphics          8.2.4
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.GeForceTesla          8.2.4
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleMuxControl          3.5.26
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIntelMCEReporter          104
com.apple.driver.AppleIntelHDGraphicsFB          8.2.4
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.nvidia.NVDAStartup          8.2.6
com.apple.iokit.IOBluetoothUSBDFU          4.2.4f1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.4f1
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.iokit.SCSITaskUserClient          3.6.6
com.apple.driver.AppleUSBCardReader          3.4.1
com.apple.driver.AppleIRController          325.7
com.apple.driver.AppleUSBTCKeyEventDriver          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.driver.AppleUSBHub          666.4.0
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
com.apple.driver.AppleFWOHCI          5.0.2
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.driver.AppleUSBEHCI          660.4.0
com.apple.driver.AppleUSBUHCI          656.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          217.92.1
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          217.92.1
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.AppleGraphicsDeviceControl          3.5.26
com.apple.driver.DspFuncLib          2.6.1f2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.7fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOSurface          91.1
com.apple.iokit.IOBluetoothFamily          4.2.4f1
com.apple.nvidia.classic.NVDANV50HalTesla          8.2.4
com.apple.nvidia.classic.NVDAResmanTesla          8.2.4
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleGraphicsControl          3.5.26
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.driver.AppleHDAController          2.6.1f2
com.apple.iokit.IOHDAFamily          2.6.1f2
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.4f1
com.apple.iokit.IOFireWireIP          2.2.6
com.apple.driver.IOPlatformPluginFamily          5.7.0d11
com.apple.driver.AppleSMC          3.1.8
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.6
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.driver.AppleUSBMultitouch          240.9
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.iokit.IO80211Family          630.35
com.apple.iokit.IOEthernetAVBController          1.0.3b4
com.apple.driver.mDNSOffloadUserClient          1.0.1b5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.iokit.IOUSBFamily          677.4.0
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x830B, 0x4E54344743363442384847304E532D434720
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x830B, 0x4E54344743363442384847304E532D434720
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD5000LPVX-08V0TT5, 500,11 GB
Serial ATA Device: ADATA SX900, 256,06 GB
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:

You probably have the problem described at http://support.apple.com/kb/ts4088
gfxCardStatus by cody krieger may help by allowing you to keep the graphics set to one of the two modes
In any case : take it to Apple or an AASP & show them the report They should run a specific test with a simple pass/fail result shown on screen.
The three year period since purchase has probably passed; but nonetheless, if you're asked to pay, I'd call Apple customer service (or speak to the store manager ) & request that they consider your case. Several users here have previously obtained free repairs after doing so, even though outside the time limit. Here's a fairly recent one,
and another

MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

     Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
      After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
     After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
     The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
     At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
     Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Boot Camp causes Kernel Panics on Startup

Hi all,
I just purchased a new MBP. I had installed everything and transferred all of my files from my previous notebook (via Time Machine). System was working very well.
I wanted to install a windows partition via boot camp. used Boot Camp Assistant to create a 50GB partition (leaving >200GB of free space on my main partition) for windows 7. Installed this perfectly fine.
Started up OS X again, and was using that for the rest of the day. Played a game in Boot Camp for an hour or so just now. Now, every time I try to boot to my OS X (10.6.4) partition, it kernel panics. Grey curtain of death.
I booted into the backup disc, and repaired the drive using Disk Utility. This found some errors and supposedly fixed them. Permission repair went likewise. Still no luck booting into OS X (but I can use the Windows 7 Ultimate x64 partition just fine).
While trying to resolve this issue, I tried to reinstall OS X over the partition that would not boot up. Erased ONLY that partition and tried to install. Install appeared to work fine, but when not booting from the CD (after the installation finished) it panicked again.
The only way to resolve the issue was to completely repartition the drive and reinstall OS X.
Has anyone else had this problem, and resolved it? I would really like to be able to use boot camp...

I would recommend cloning your system to another drive in addition or instead of using TimeMachine so you have a bootable backup. Also for booting from to run repairs, and if/when you turn to 3rd party disk repair programs like Disk Warrior.
I suspect it has more to do with 10.6.4.
Did you install the Apple SETUP drivers and such in Windows 7? the Boot Camp 3.0.x and 3.1? your OEM DVD has those, and likely has more current than what was provided last year even.
Panics are often external USB cables, devices, RAM, but hardware, and sometimes from drivers. But I doubt it has to do with Windows 7.
http://www.thexlab.com/faqs/kernelpanics.html
http://www.macmaps.com/kernelpanic.html

Can not boot into OSX after boot camp installation and resizing of Macintosh HD

So from the beginning what I was trying to do was set up my iMac (27-inch, Late 2013) with boot camp so that I could play some old windows based games that can not be played in Parallels.
I went through the Boot camp process and everything set up just fine.
I had both OS X Yosemite 10.10.2 and Windows 8 Professional running but as I was installing games on to boot camp I discovered I did not allocate enough space and needed to extend the Boot Camp partition.
I used boot camp utility to set OS X as the default start up disk and had it restart
I launched into OS X and used Disk Utility to shrink Macintosh HD another 120GB
Restarted again holding option and launched into Windows
Used the disk management in windows to try and extend the boot camp partition into the unallocated space.
It was not an option to extend it so I tried to create a new simple volume from the unallocated space then delete it and try to extend it again.
It still was not an option.
From there I went to restart again while holding option and the only options I had were 10.10 Recovery and Windows
I tried using disk utility in recovery and Macintosh hd now only showed disk0s2
I tried to verify and it could not verify
I tried to repair and it could not repair.
I put the iMac in target disk mode and using a thunderbolt cable I tried using disk utility from my MacBook Pro (13-inch Mid 2012)
Verifying volume “disk2s2”Verifying file system.** /dev/rdisk2s2
Invalid BS_jmpBoot in boot block: 000000
File system check exit code is 8.Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “disk2s2”Repairing file system.** /dev/rdisk2s2
Invalid BS_jmpBoot in boot block: 000000
File system check exit code is 8.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
This is the same error I got on my iMac
I used terminal diskutil list and got:
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:       Microsoft Basic Data                         799.3 GB   disk2s2
   3:                  Apple_HFS Recovery HD             650.0 MB   disk2s3
   4:       Microsoft Basic Data BOOTCAMP                70.3 GB    disk2s4
I can see that Macintosh HD was disk2s2 but it now shows its Microsoft Basic Data.
I did not format this partition and it was working fine till I restarted the computer after resizing Macintosh HD.
I am not sure what I can do to fix this.
I've found multiple articles about similar issues, but the issue thet they have was that they could not boot to Windows instead of my issue not booting to OS X

****************    Update    *****************
From the Windows Partition using Disk Management I can see that the drive is still labeled Macintosh HD and that all of my data is there.
I have a complete backup so i'm not worried so much about the data.
What I'm most interested in is trying to solve this issue because I'd like to continue using boot camp and I actually work with mac computers and would like to be able to help others if this issue arrises again.

External HD "Not Readable" after Boot Camp Installation

After installing Windows XP on my Mac, I switched back over to OS X and tried to access my external hard drive which greeted me with the message: "The disk you inserted is not readable by this computer." I assume that the Boot Camp process must've affected the external drive and made it incompatible with OS X. The external does show up in Disk Utility, but there are no options to repair the disk, only erase. Can anyone tell me how to reformat the drive, without losing all of the precious data on the disk, for OS X?

XP can't see Mac OS file system.
There is your drive, and your volume_name on the left side column. You have to click on volume_name and select the tab for Repair.
Best to backup before installing or updating any OS, and leave everything you don't need disconnected.
I doubt anything changed, should not have.

Gray screen during startup after boot camp installation

I cannot either Mac and Windows t start on Mac Mini after I updated with Windows7 on Bootcamp.

Hi there Sudarshan21,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

Windows 7 Pro not finding network connections after boot camp installation. Is there something special we have to do to get the network (wired and wireless) set up?

Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?

tim-bob wrote:
Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?
If you haven't yet installed the Windows Support Software, that's probably why, so install it now.

Kernel Panic When Booting with Install DVD

I get a kernel panic when booting from the OSX 4 (tiger) install DVD. I am using a Quad G-5 with 8 gigs of ram.

Have to ask what version your Quad came with, whether same DVD you are using now. Apple now has Tiger DVDs w/ 10.4.6 for sale.
When booting, or when you get to the screen to select Languages on the initial screen (before you can select DU or Installer etc)?
How about Option booting to Apple Hardware Test and running extended test?
Did you run memtest or anything when you installed RAM (assuming you didn't buy it BTO w/ 8GB).
Any time adding or changing hardware, including memory, it is either a good policy or essential in some cases to boot into Open Firmware (command option of) on startup and type "reset-nvram" and 'reset-all" after installing. Same for PCIe or even swapping out disk drive (where sometimes a drive won't show up or allow you to partition).

Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
Do anybody out there has an ideal of what to do to solve this issue.
Thanks
Pierre317

Hi Pierre,
more tips can be found here ...

Kernel panic when booting from DVD or external drive

Hey Folks,
I have a 13" MBP, seems to run fine for the most part.
However, I can't boot from DVDs or external hard drives. Disk Warrior, my and a tech support buddy of mine's OSX Snow Leopard DVDs, and external boot disks all cause a kernel panic when selected from the alternate boot menu when rebooting with alt.
The DVD/External spins up, the loading spinner goes for about 20-30 seconds, and then BAM - Kernel panic. I'd reinstall OSX... but I can't!
Any suggestions? I'd rather not send the computer to a tech for a week - I need it daily for work.

Kernel panic log:
Fri Nov 26 11:42:49 2010
panic(cpu 0 caller 0x2a6ac2): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x000006e8
EAX: 0x57cd9408, EBX: 0x57983dec, ECX: 0x06fa2b80, EDX: 0x07fb9c80
CR2: 0x00000000, EBP: 0x57983e18, ESI: 0x07fb9f00, EDI: 0x00000001
EFL: 0x00010206, EIP: 0x00000000, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000010
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x57983ae8 : 0x21acfa (0x5ce650 0x57983b1c 0x223156 0x0)
0x57983b38 : 0x2a6ac2 (0x590a50 0x0 0xe 0x590c1a)
0x57983c18 : 0x29c968 (0x57983c30 0x7fb9f00 0x57983e18 0x0)
0x57983c28 : 0x0 (0xe 0x48 0x57980010 0x7fb0010)
0x57983e18 : 0x5389f2 (0x7fb5a00 0x7f62500 0x1 0x4fbe2a)
0x57983e78 : 0x536c27 (0x7f62500 0x7fb5a00 0x8006380 0x805e4c0)
0x57983f28 : 0x5371b8 (0x7f62500 0x8000140 0x0 0xffffffff)
0x57983f78 : 0x538e67 (0x7f62500 0x0 0x57983fac 0x1)
0x57983fc8 : 0x29c68c (0x7f85190 0x0 0x29c69b 0x74d03d4)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10A432
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 109525048606
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.AppleGraphicsControl 2.8.16
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleBacklight 170.0.2
com.apple.driver.AppleIRController 161
com.apple.driver.AppleIntelMeromProfile 19
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.GeForce 6.0.0
com.apple.driver.DiskImages.SparseDiskImage 281
com.apple.driver.DiskImages.ReadWriteDiskImage 281
com.apple.driver.DiskImages.UDIFDiskImage 281
com.apple.driver.DiskImages.RAMBackingStore 281
com.apple.driver.DiskImages.HTTPBackingStore 281
com.apple.driver.DiskImages.FileBackingStore 281
com.apple.driver.AppleUSBTCButtons 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.driver.AppleUSBCardReader 2.5.0
com.apple.iokit.SCSITaskUserClient 2.5.0
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBOHCI 3.7.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.driver.AppleHDAPlatformDriver 1.7.4a1 - last loaded 109517592692
com.apple.iokit.IOBluetoothSerialManager 2.2f18
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.4a1
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.iokit.AppleProfileFamily 40
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.NVDAResman 6.0.0
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.DiskImages.KernelBacked 281
com.apple.driver.AppleUSBMultitouch 200.20
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.2f18
com.apple.driver.AppleUSBBluetoothHCIController 2.2f18
com.apple.iokit.IOBluetoothFamily 2.2f18
com.apple.iokit.IOUSBMassStorageClass 2.5.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.5.0
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.0
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IONetworkingFamily 1.8
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0

Kernel panic when I try startx: edited again

I just reinstalled arch (slight mishap yesterday :oops: ) I'm running testing, have installed xorg, kde, ati stuff, etc. When I try to startx I get a "kernel panic not syncing". Has something to do with xorg configeration.
Any ideas :?:
If I just run xorgconfig no panic when I then run aticonfig etc panic.
For the moment I've given up on fglrx and am just trying radeon. the message I get says the system can't find the radeon driver :?:
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-96
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
/etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE=
HARDWARECLOCK="localtime"
TIMEZONE=Canada/Eastern
KEYMAP=us
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
MODULES=(radeon)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="normlx"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond !kdm)
# End of file

KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew

Boot Camp Assistant quit unexpectedly when creating partition

Dear Sir
I am using an Imac 21.5" (Late 2012) version of imac.
Thought of installing win7 to my system but i am hit with this error as Boot Camp Assistant quit unexpectedly when i clicked next after selecting the partition for windows,
Full error message is" Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple."
PLease advice.
Thanks.
Process:         Boot Camp Assistant [1101]
Path:            /Applications/Utilities/Boot Camp Assistant.app/Contents/MacOS/Boot Camp Assistant
Identifier:      com.apple.bootcampassistant
Version:         5.0.2 (462)
Build Info:      BootCampAssistant-5030000000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [130]
User ID:         501
Date/Time:       2013-03-31 17:36:25.075 +0800
OS Version:      Mac OS X 10.8.3 (12D78)
Report Version: 10
Interval Since Last Report:          1835 sec
Crashes Since Last Report:           13
Per-App Interval Since Last Report: 607 sec
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      4DB7CAAB-CFA8-6F8C-1EFB-CEF8C8FF222F
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000000000003c
VM Regions Near 0x3c:
-->
    __TEXT                 00000001053b4000-00000001053da000 [ 152K] r-x/rwx SM=COW /Applications/Utilities/Boot Camp Assistant.app/Contents/MacOS/Boot Camp Assistant
Application Specific Information:
Performing @selector(continueButtonClicked:) from sender NSButton 0x7fbdd9a25780

Same thing for me too. I have "downloaded the latest Windows support software from Apple" and put it on my USB stick.
Only if I try to disconnect the USB drive I get this message:
The installer disc could not be found.
Insert your Windows installer disc and wait a few seconds for the disc to be recognized.
Then if I connect the USB stick again, I get this message again:
Boot Camp Assistant quit unexpectedly.
Any tips on how to solve this would be greatly appreciated!

What is wrong with my user account?? Why do I get kernel panic when restart

Hi there. I got Leopard and was quite unhappy (don't think it was meant for a powerbook). So I started using Tiger again, and I flip flopped once or twice after the update came out for Leopard, thinking/hoping it would fix my problems. It didn't. I have given up on Leopard.
But, now Tiger seems to have a few problems of its own. I get the kernel panic when I restart my computer (telling me to restart), so I have to hold down the power button to turn it off and then turn it back on. Not a big deal, but if it shouldn't be doing that, I don't want it to, ya know? Never did it before Leopard.
My user account seems to be dysfunctional when it comes to downloading plug-ins for safari or firefox. I had to create a new user account and download the plug in from that account and then drag it into the HD to use it on my user account. I repaired disk permissions and booted from Tiger and did the same thing on there. After that, my user account is still not able to download that plug-in without getting errors (256)?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
Thanks!

Leopard will work with your Powerbook, the question is, is all your software and hardware ready for it?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
You can start from a blank slate, but if you have a hardware problem that started to generate itself, a blank slate won't solve it. It is called an erase and install. The first thing to do is backup your data*:
http://www.macmaps.com/backup.html
Once that is done at least twice, we can start looking at solutions for kernel panics*:
http://www.macmaps.com/kernelpanic.html
- * Links to my pages may give me compensation

Boot Camp Installation: Definition of, and insights into "External Drives"?

I'm recovering from a logic board failure. One casualty was that I lost my prior Boot Camp installation of Windows on my main internal hard drive. :-( Wondering if I can install Windows anywhere other than the main internal hard drive so I can maximize space on my OSX main internal drive?
From what I've gathered, installing Windows 7 Boot Camp is very difficult (and perhaps impossible?) on an external hard drive. However, what's not entirely clear is what constitutes an "external drive".
Questions:
1. Can I install a bootable installation of Windows 7 using Boot Camp (obviously not running OSX in this scenario) on either the:
A) Data Doubler 7,200 drive
or
B) Express Card 34 SSD drive
2. Can I also install Parallels (on the main internal OSX drive), then while in OSX launch (a much slower) Windows from location A or B?
Context:
1. On a late 2011 MBP 17' (version 8,3), I've replaced the stock hard drive (7,200 rpm) with a much faster OWC SSD Drive. (Awesome upgrade, btw!)
2. The internal apple dvd device was removed and the stock hard drive was inserted in this location using OWC Data Doubler. (Also, very nice.) An extra challenge here is that the dvd drive is now an external device. I have a Windows 7 install disc, but I'm not sure if it will be recognized during the installation process?
3. This model MBP has an ExpressCard 34 slot, for which I can buy an SSD drive. Never used this slot and have read mixed reports on boot ability.
Any and all insights greatly appreciated!

Yoüf wrote:
Many thanks for the helpful response, Loner T. I think I've got it. To install Windows through BCA on the Optibay drive, I temporarily move it to the main SATA bay. I can then temporarily put the DVD drive back in the Optibay. So here's a question: In doing this, I would no longer have an OSX boot drive (since I'm temporarily removing my OSX boot SSD). It's been a while since I used BCA, so my memory is fuzzy (sorry), but does the BCA process need a working OSX install on the drive in the SATA bay?
The SSD with OSX boot is normally (for your specific scenario) kept in an external enclosure (USB/FW/TB) to boot from and run BC and partition the disk in the main SATA bay.
You mention that modifying the BC info.plist causes issues. I lost you a little here. Using the method you describe (move the Optibay drive to the SATA location, run BCA to install Windows, then move the drive back to the Optibay location), does the BC info.plist need to be modified or not? If yes, a few more details would be welcomed. If not, what prompted this thought?
If you have a functional Optical drive and the designated Windows-to-be in the proper bays, the BC info.plist modifications are unnecessary, and can cause other grief, and are best avoided.
Thanks also for the bleeptobleep post. It says to use a USB3/Thunderbolt external drive (which I do have); however, my MBP (version 8,3) only has USB2 ports. I realize that a USB2 port will read a USB3 external drive, but was wondering if this limitation is a deal breaker for a bootable Windows system, or if it just means that things will be really, really, tragically slow due to low transfer rates. Any idea on this aspect?
USB3 can cause problems for Windows 7 installer, bot not as many issues for Windows 8+. It is better to stick to USB2, but you are correct it will be slow. OSX can boot and will use RAM much more aggressively, unless it has to go back to the USB (2/3) when things may give you a beach ball. Windows 7/8 are less friendly for caching the whole OS and applications in RAM, and may be slower. A TB connection is much faster (TB2 even better).
BTW: Bummer that the ExpressCard slot can't work for booting into Windows. That would be pretty slick. I've seen some older posts by folks who were once able to do this, but seemingly only with early versions of OSX. Apparently newer OSX versions either did away with this feature, or seriously complicated the process. Would love to find a workaround if one exists.
You can test it, but may have some issues finding storage for ECards.
(Dumb question: on this forum, how are you threading comments into a quoted block of text? Are you using HTML or is there some easier way?)(((
Under the "Reply" bar at the top, there is an icon with a "quote" and a "speech" bubble, which is used to quote posts. You can either quote from a previous post, or select a line (or more) of text and click on that icon.

After Boot Camp installation, Kernel Panic when launching OSX partition

Similar Messages

Maybe you are looking for