After boot PWMTR64V.dll not found Windows 8.1
After STARTUP I get the following error message on a brand new E440.....There was a problem starting C:\Program Files (x86) Thinkpad \ Utilities \ PWMTR64V.dll. The specified module could not be found.
How do I get rid of this error message. Took a look at the registry but could not locate key to delete and in windows 8.1 there doesn't seem to be a Lenovo power manager program to install as in windows 7. What are my options here? Thanks?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2
Similar Messages
-
Error 7 (Windows error 126) avFoundationcf.dll not found.
Error 7 (Windows error 126) avFoundationcf.dll not found. windows 7 64bit, I've tried everything, but it dosn't work, please help.
Update .netframework to latest version (see apple support)
then
Follow the instructions on this link, basically un-install everything, remove programs that says they are made by apple inc. (using add remove program)
http://www.reimageplus.com/fix-windows-127-error/ (Many thanks to reimageplus.com)
You will also need to check and verify that the following folders have been removed:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iTunes
C:\Program Files\iPod
C:\Program Files\QuickTime
C:\Windows\System32\QuickTime
C:\Windows\System32\QuickTimeVR
dont forget to remove icloud also
you dont need to delete your itune music library though
If any of these folders still exist, delete them along with their contents. (if you cant delete them, right click and go to properties and then security and change the control of the fold to you)
do this for files under program files and program file (x86) on your computer
once you have deleted everything, restart your computer. Then I repaired my registry using a registry repair program.
Important:- instead of installing itunes I installed quick time, which installs apple application support (this is the corrupt file which is causing all the issues)
i then installed itunes and it all worked fine,
should take no longer than half hour to fix
hope this helps -
After installing new itunes upgrade on Windows Vista PC, itunes does not open. Getting error boxes identfiying Windows error 126 (error 7) plus; MSVCR80.dll not found.
Anyone have casue and resolution?
Apple support did not have file or process available to backoff to previous itunes version v11.1.3 to allow recovery so itunes could continue use with no problems as before this new upgrade.Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
Have had Itunes on this computer literally for years. This AM message "MSVCR80.dll not found, not installed correctly Error 7 (Windows error 126) "- and could not download (it wanted a mobile device - I don't have one)
Help!Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
I am running Windows Server 2003 R2 (I know it's old, I'm in the process of upgrading it now to 2012) on an old HP ProLiant server. It's worked for ages, but yesterday morning it booted up with the blue screen of death, saying:
STOP c0000135 unable to locate component csrsrv.dll not found. Reinstalling the application may fix the problem.
I have tried coping the file from C:\WINDOWS\ServicePackFiles\i386\csrsrv.dll to C:\WINDOWS\system32\ using a WS2003R2 recovery disk, but it still doesn't work. I'm not sure what to do now...
I do have backups, but I'd prefer just to get this server back up and running so that I can continue to migration so that I can decommission it permanently and put it out to pasture...
Any help and guidance is greatly appreciated.
Thanks in advance!If copying the DLL does not help then I would recommend doing a system state restore from a backup.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Having difficulty accessing I Tunes on my Windows 7 Vista.
Error messages are two fold:
1. MSVCR80.dll not found. Reinstall may help correct prob.
2. Windows Error 126.Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?
That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.
-
cannot reinstall itunes, i get this message MSVCR80.dll not found. Try to reinstall itunes and i get error 7 (Windows erro 126) help please
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
MSVCR80.dll not found after trying to upgrade itunes
Tried to update my itunes and now I can't open it all...I get a MSVCR80.dll not found. Itunes not installed correctly Error 7 (Windows error 126)....How do I get the MSVCR80.dll file back????
See solution posted by turingtest2
-
iTunes will now download because of 2 errors; "failed to start MSVCR80.dll not found" and "error 7, windows error 126" using microsoft.
Click here and follow the instructions.
(98918) -
Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.
Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
I recently followed cnet directions to move itunes from c drive on pc running xp pro, to external drive, for space reasons. Process worked. I tunes ran from e drive, verified data on e drive, deleted all apple applications on c drive so I could remove itunes and recover space. Verified itunes still worked off of new short cut and and that target was e drive. Now itunes won't open and get message "AVFoundationCF.dll not found - reinstall", or "not installed correctly Error 7 (windows error 126) - reinstall." Tried download, install from apple.com for itunes on c drive, but message "library can't be read because it was created by a newer version of itunes." How do I fix this without losing all of our "material" saved on the itunes program?
Thank you for the reply, but so far no go. I tried through control panel and add remove programs with repair option as suggested but got error..."C:\programs......AppleAplicationSupport.msi cannot be found." This was after I have done new download and install of itunes to the c drive. I have not taken any steps to try use that down load or reload any material on it. I changed path to external drive an folder, E:\ itunes and got the "error not valid installation package." Still looking for answers...
-
Build & Capture TS (MDT) - Capture fails at PrepareOS (sysprep) with "Boot Image package not found"
Hi all,
I'm searching for a while on this one now... I'm unable to perform a "ZeroTouch" Build & Capture of my reference machine to get a master image, with Capture Media it seems to be working, but this is a manual step...
While running a W7SP1 Build & Capture task sequence, the "Capture the reference machine" group fails at "PrepareOS". The step before "PrepareOS", "Prepare ConfigMgr Client" runs without any issues.
The only error I can find, shows up in the report "OSD - history of a TS":
... 0005 that is either already released or we have not connected to it.
BootImage::ResolveImageSource( pszPackageId, sImagePackageSourcePath, sImageSourcePath), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\bootimage.cpp,732)
TS::Boot::BootImage::StageBootImage(sPkgID), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\prepareos.cpp,917)
PreStageWINPE(m_bDebug), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\prepareos.cpp,1363)
pCmd->Sysprep(bActivate, bMsd), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\main.cpp,270)
De-Initialization successful
Exiting with error code 2
sending with winhttp failed; 80072ee2
SendResourceRequest() failed. 80072ee2
Download() failed. 80072ee2.
Boot Image package not found.
he system cannot find the file specified. (Error: 80070002; Source: Windows)
Failed to pre-stage WINPE image, hr=0x80070002
Unable to sysprep the machine, hr=80070002
Sysprep'ing the machine failed, hr=80070002
I've searched the smsts.log file hundreds of times for errors, nothing there...
Can anyone give me a clue or just something...? I really don't know what my next step, to make this work, could be...
Thanks!The error Torsten pointed out gave me some clue... After much digging around on the web, I've stumbled upon this
article which led me into adding the following TS-variables:
SMSTSDownloadRetryCount: 5
SMSTSDownloadRetryDelay: 15
It seems to be working now on all types of hardware...
Case closed, thank you for the assistance!
Let's hope this article can save someone a couple of days... :)
Wesley -
Hi all,
We have a program that acquires images from a camera. We use LV 8.5 and NI-IMAQ. It worked wonderfully until today, when after installation in a customer's computer, the customer tried to run it and got the message "imaq.dll not found" and asked the user to find it.
What is this dll, and why was the program easily able to find it before? Can I just insert imaq.dll into my project so it will have to include it in the installer? If not, does anyone have any ideas?
Thanks in advance,
Danielle
"Wisdom comes from experience. Experience is often a result of lack of wisdom.”
― Terry Pratchett
Solved!
Go to Solution.Hi Danielle,
You can download the Vision Acquisition software from ni.com. This includes NI-IMAQ. That way you will have the source files you need when you go to create your installer. The link is:
NI Vision Acquisition Software 8.6 - Windows 2000/Vista x64/Vista x86/XP
http://joule.ni.com/nidu/cds/view/p/id/1099/lang/en
Nick Keel
Applications Engineering
National Instruments
Nick Keel
Product Manager - NI VeriStand and Model Interface Toolkit
National Instruments -
Hi,
when starting a TestStand Operator Interface or the Sequence Editor I sometimes have the following problem: mxsxport.dll not found!
This seems to be a dll belonging to MAX. I've already added the directory of this dll to the search directories but the failure still happens sometimes.
Any suggestions?
Thanks
Steffen
P.S: I'm using Win2000 on one machine and Win XP on another, both have the problem. TS 3.1, MAX 3.1.1, NI-DAQ 7.4Hi Scott,
regarding your questions I can tell you the following:
1) I'm using a OI that was modified out of a simple OI shipped with TS. The development environment is CVI 7.1.
2) I attached the error message. Unfortunately it's in German because of German Win2K. But it says that the dll was not found in the listed directories.
3) The OI starts the sequence correctly but stops/hangs when it reaches the first step that uses DAQmx. The DAQmx functions are implemented in a CVI dll (dioclass.dll). I think that the error occurs when the TS Engine tries to load all necessary code modules because the error message pops up after the login screen of the TS Engine. I attach the section of the log window of dependency walker.
4) see #1 and #3 - there are no MAX or DAQ calls in the OI directly. Only my dioclass.dll which is called by TS steps uses DAQ.
I haven't tried to add MAX directory to PATH variable yet but I will do so soon. But I'm not sure if I can make a statement about it because the error is not really repeatable.
Regards
Steffen
Attachments:
mxsxportdll.zip 27 KB
Maybe you are looking for
-
Erro Retorno ERP Nota status 10
Bom dia Srs, Estou com um problema para voltar o status de uma nota para o ERP, a nota tem status 10 erro de validação. Já tentei algumas coisas: Verifiquei os jobs esta rodando normalmente, smq2, e monitor enfim tudo em ordem. Rodei o programa /XN
-
Disabled subscription sends notifications, relative date not working properly
Hi I have two problems regarding subscriptions: 1.When I disable a subscription, should I receive any further notifications? I am receiving notifications despite disabling the subscription. (I have cloned the template and deleted the original templat
-
ACE SSL Sticky class-map generic vs class default differences.
There was a thread recently titled "ACE 3.0(0) SW / LB with SSL Session-ID" where Giles Dufour outlined a configuration for an ACE performing sticky based on SSL Session ID. Can anyone explain the benefits and differences of using a specific class-ma
-
Intercompany Reconciliation (ICR) process reports
Hi, I'm setting up Intercompany Reconciliation with New Ledger ECC6 and i wonder if there is any report giving track to what is automatically reconciliated by all 3 processes. Is anyone aware? Thanks in advance, Alix Edited by: Alix Piot on Jan 29, 2
-
Recieving press MouseEvents immediately after release MouseEvents
When I release the mouse with this code, it receives a MouseEvent that says it's released, and then immediately afterward one that says it's been pressed again. This is the code that processes the press events... (I am fully aware of how awful it is)