After BUDK costing run, 300 materials are open.

After BUDK costing run, 300 materials are open . When clicked on the same it gave a dump.
What may be the reason for which the materials are still open. How to identify them and
take subsequent corrective action?

Hi
Refer  Note 1402978 - CK40N: Incorrect statistics after inconsistency corrrection
This note has child Note 542790 - Inconsistency correction: Costing run statistics and others.. You should start with this note.. and then come to above note 1402978
Regards
Ajay M
Edited by: Ajay Maheshwari on Nov 12, 2010 6:57 PM

Similar Messages

  • Costing run for materials with special procurement key

    Hello,
    Since moving to ECC6, the costing run for materials with special procurement keys is not pulling the marked price from the materials the special procurement keys point to. Only the released prices are pulled.
    Example:
    Material A, plant A has a future price (costing 2 tab) of 100 and a current price of 99
    Material A, plant B has special procurement key Z1 (costing 1 tab) which pulls the costing from Material A, plant A
    In our old system (46c) the costing run for Material A, plant B would pull 100.
    In ECC6, the costing run for Material A, plant B pulls 99
    Anyone that can push me in the right direction?

    Hi,
    Based on the info provided thus far, the result that you notice in ECC 6.0 is right as it is picking the current standard price based on your setup.
    Now why it is picking the future price in 4.6c, well for that you will have to do a detail check as in which variant is being used etc. I would suggest you to work with your CO personnel on this. Do a costing run for this particular material via CK11n using the variant which you mentioned & see the results.
    Or if you can upload the screenshots (picasaweb or some other portal) of the valuation variant you're using in 4.6c, along with Acctng view 1 & 2, costing view 1 & 2 details of the material it would help to have a better understanding.
    Regards,
    Vivek

  • Unabsorbed balance after actual cost run

    Hi gurus
    I am facing problem in Production cost center there is unabsorbed balance after actual cost run
    kindly help me.

    Thanks all.
    I have solved it.

  • Costing run for materials

    Hi,
    We have product costing in our company (COPC). We have two production versions for one FG. Currently we have run the costing based on version 1. But from next month if I need to run the costing based on version 2, I need to know will it work if I save the cost estimate of version 2 from CK11N and run the costing from CK24? Will it update the cost of the FG for the next month based on version 2 ? If not please explain a way to do this.
    Many Thanks
    Oshani

    Hi Oshani,
    Yes. It should work. Just be sure you assign the Version 2 in CK11N (in the tab Qty Struct.).
    Check also that you version 2 is active (traffic light is green) in C223.
    Thanks and Regards,
    Mariano

  • Cost Run should not be getting executed on Material with Price Control V

    Raw & Packing materials are with price control V in MM as company wants to keep them on moving average cost. Somehow finance users executed cost run on one such material and cost run was executed and the difference was posted in price difference. As far as I know, system shouldn't be allowing cost run on materials other than those having S as price control.
    Question is: How to ensure system sends error if cost run is attempted to be executed on materials with Price Control V?

    Hi
    If you are executing cost run using CK40N, it releases the cost for all the materials i.e. both for the header and the components
    the components may be usually valuated at V. So, the std price update for these will be only for information purposes and it wont revaluate your inventory for sure... This cant post to price difference.... Price diff upon std cost release will apply only to those materials which have price control S
    However, if you dont want to release the cost for V items, you can specify them in the exclusion list... In Ck40N selection parameters you specify your plant/material, etc...  While specifying the materials to be costed in the multiple selection screen, , you can also specify the ones not to be. Then std cost wont be released in those cases
    Regards
    Ajay M

  • Screen Goes Dark when No files Are Open

    Hi,
    Since I installed the CS 6, I seem to have a problem with my display going dark whenever Illustrator CS 6 doesn't have opened files, i.e., the application runs, no files are open, and my whole screen's brigthness goes down. It only happens with Illustrator CS 6. When I open a file, the screen goes back to normal. Has anyone had that problem?

    Unfortunately attempts to take a screenshot to show you have resulted in the interface look as it if were at full brigthness so I can't show you (well unless I edit the screenshot after). But basically the whole screen brightness goes dark until I open a new file. And it only happens with Illustrator CS6. I still haven't been able to solve the issue and I can't find anything on the net about that.

  • Restrict all goods movements for materials untill the latest costing run ex

    Hi dudes,
    1 here i have a requirement that i need to restrict all goods movements in the month for all materials(SFG,FG) untill the latest costing run(standard cost estimate) on 1st of each month.
    2. Can we restrict the status of process order in such a way that Conformation can be done only after the goods issues against production order. The goods receipt can be done only after the conformation of the process order.
    Thanks in advance.
    Robert.

    Robert,
    Procedurally you can block, by not opening the current period, before the costing run is completed, just when you wanted to release the cost estimate, at that time you can lock all users and then open the next period and then release your cost estimate and then unlock all the users. You need to work with your Basis/MM/FICO guys to have this procedure implemented.
    On the GI Check before confirmation and Confirmation check before GR, you can use Confirmation and GR releated User exits to check. There are many posts on this topic, a simple search on this forum would take you to the thread.
    Regards,
    Prasobh

  • Problem description: (MacBook Pro 15" late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unrespo

    Problem description:
    (MacBook Pro 15” late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open.  Randomly freezes and becomes unresponsive, requiring forced power down.  Randomly logs off.  Removed Kodak AIO software via Clean My Mac2, but BonjourAgent still there and requesting access.  Cleaned weekly with Clean My Mac2 and running Sophos AntiVirus. 2GB memory installed.  Currently 169.99 GB available of 249.2 GB capacity.
    Help?
    EtreCheck version: 2.1.8 (121)
    Report generated March 21, 2015 at 11:35:35 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Late 2008) (Technical Specifications)
        MacBook Pro - model: MacBookPro5,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2-core
        2 GB RAM Upgradeable
            BANK 0/DIMM0
                1 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                1 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 59
    Video Information: ℹ️
        NVIDIA GeForce 9400M - VRAM: 256 MB
            Color LCD 1440 x 900
        NVIDIA GeForce 9600M GT - VRAM: 256 MB
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:13:37
    Disk Information: ℹ️
        Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 249.20 GB (168.91 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS21N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple, Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.kodak.BonjourAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    User Login Items: ℹ️
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [Click for support]
        Google Earth Web Plug-in: Version: 6.0 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        Disconnect
        Add To Amazon Wish List
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        Tuxera NTFS  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.20 GB Disk used: 80.29 GB
        Destinations:
            Backup [Local]
            Total size: 63.67 GB
            Total number of backups: 1
            Oldest backup: 2015-02-23 16:16:08 +0000
            Last backup: 2015-02-23 16:16:08 +0000
            Size of backup disk: Too small
                Backup size 63.67 GB < (Disk used 80.29 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             1%    loginwindow
             0%    AppleSpell
             0%    SophosUIServer
             0%    SophosAntiVirus
    Top Processes by Memory: ℹ️
        118 MB    InterCheck
        101 MB    SophosScanD
        60 MB    Dropbox
        54 MB    mds_stores
        41 MB    SophosAntiVirus
    Virtual Memory Information: ℹ️
        49 MB    Free RAM
        682 MB    Active RAM
        652 MB    Inactive RAM
        315 MB    Wired RAM
        1.49 GB    Page-ins
        2 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 21, 2015, 11:18:52 AM    Self test - passed
        Mar 21, 2015, 10:53:03 AM    /Library/Logs/DiagnosticReports/SophosUIServer_2015-03-21-105303_[redacted].cra sh
        Mar 19, 2015, 07:59:03 PM    /Library/Logs/DiagnosticReports/CalNCService_2015-03-19-195903_[redacted].crash

    Linc Davis wrote:
    Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
    Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
    Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.
    The Etrecheck report clearly shows that SylvieRose has a Macbook Pro, not a Macbook Air and that there are only 2 GB  RAM installed.  The Etrecheck report can be very informative if one takes the time to examine it. 
    Ciao.

  • Server Admin refuses to connect, servermgrd runs but no ports are open

    Server Admin refuses to connect to server when run locally or remotely. Upon investigating, servermgrd seems to run but when I run network utilities and port scan the server, neither port 311 or 687 are open. All other services appear to be running fine. No firewall is running. Server Monitor also has the same problems but WorkGroup Manager seems to work fine.
    About 3 weeks ago, I had the problem and after trying many things, I did a clean install but the problem has reappeared after a few days/weeks.
    At some point, servermgrd was crashing with a message about NSURL.... (lost and forgot the exact message).
    -Tried to remove all the files in /private/var/servermgrd/
    This solved the crashes but it now runs without opening the ports. After starting, it doesn't run away and consume any CPU.
    Could not locate in system.log, console.log and servermgr.log any error messages indicatind something is wrong with servermgrd.
    The log does show that server names are coherent.
    Apr 18 23:06:31 server-1 servermgrd: servermgr_dns: hostname and DNS entries for this server are synchronized
    - Tried rebooting.
    - Tried running servermgrd with various flags, including alternate port but nothing happen. In fact the alternate ports do noot seem to get open. Even passing faulty options, it runs without complaining !
    - Tried to reinstall the admin tools
    - Tried to remove keychain paswords entries
    - Tried Disk Utilities repair permissions.
    Searching the posts, found somebody talkingabout servermgr_ctl
    I'm starting to suspect some hardware failure (RAM).
    Any suggestion how to test the ram.
    Running out of idea.
    Desperate for solution.
    Background
    OS X Server 10.4.9
    Server Admin version Version 10.4.7 (157.8)
    Xserve Dual G4 with 2 GB ram.   Mac OS X (10.4.9)  

    Ok, I ran memtest 4.2 and discovered the ram was failing, In replacing the dimm, they started working again so it may have been a mis-seated dimm module or some oxidation on the contact. My file system was already corrupt despite it being a fresh install. Then I checked and notice that the file com.apple.servermgrd.plist in Library preferences was gone. Either I stuppidly deleted it trying to fix the problem or it was hosed by the memory/file system corruption. Anyway, I copied it from another server and Both Server Admin and Server Monitor are now working.
    SOLVED.
    PS: in view of this event, once I'm satisfied the memory issues is solved, I'll do again a clean install. Who know what else was corrupted.

  • After updating to Mavericks I can't open iTunes. I keep getting a popup telling me to unclick "run in 32- bit mode" in iTunes info. I have done that several times and rebooted. Everything else seems to be working fine.

    After updating to Mavericks, I can't open iTunes. I keep getting  a pop up telling me iTunes needs to run in 64-bit mode. After following directions several times to go to Finder, iTunes, Get info and "unclick 32-bit mode" it still won't work and i keep getting the smae pop up window. I've rebooted several times also.

    What version of iTunes do you have? The current version of iTunes for Mavericks is 11.1.5 and the default mode is 64 bit. If "Open in 32 bit mode" is checked and you cannot uncheck it are you logged on using an account with administrative priveleges?

  • Add addition import duty cost to materials  for costing run

    Hi All,
    Whats the best solution to add the additional cost of import duty on materials imported into China?
    Is adding an additive cost (CK74N) possible and the best solution? This way it will be picked up automatically in costing run?
    Cheers
    Tony

    Thanks Jeyakanthan. Can you give me more details though?
    Are you saying to configure the additive cost? Assign it to the materials in question and then run the costing run?

  • Resons for Missing Materials in Costing run- very urgent

    Hi,
    Can anyone tell me why are some materials not picked in the costing run.
    Can anyone list the reasons for missing the materials?
    Can give me in general, not in particular to my problem, so that I can check through each one of those reasons and figure out my problem
    You help in this regard is highly appreciated
    Thanks in advance
    Kumar

    Hi,
    Please check:
    1. The fields 'With Quantity Structure' and 'Material Origin' are checked in the costing 1 view of material master.
    2. 'Do not cost' is not checked for those materials to be costed.
    3. Required materials are selected (not deselected) for the costing run.
    4. Check the quantity structure explosion indicator in MRP4 view of the material master and if its based on production version, check the assignment of production version.
    4. Ensure that you are executing the costing run only for those materials for which you have not already executed the costing run and relased the cost estimate for the period under review.
    Hope these points help...

  • Automatic Costing Run after BOM updates

    Hi All,
             My client requirement is that is there any possiblity of Automatic costing Run after BOM updates?
    or any message can be triggered to Finance dept from SAP after BOM updates.
    Thanks,
    dev

    Dear Dev,
    In standard SAP it is not possible.
    In case if you are using ECM - Change numbers for BOM creation/change then we can trigger a message.But in order to trigger
    a report has to be developed,but in my understanding it is good to take only costing run for a period and the made BOM
    changes will get reflected in the next costing run for the next period.
    Incase if in the same period a new cost estimate has to be carried out means first CKR1 has to be executed.
    Check and revert back.
    Regards
    Mangalraj.S

  • After trying to run the iTunes automatic update, I got this "The feature you are trying to use is on a network resource that is unavailable." Click OK to try again,or enter an alternate path to a folder containing the installation package 'itunes.msi"

    After trying to run the iTunes automatic update, I got this box on my pc "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi" in the box below.. I ran a search for the file, and entered that into the box, to no avail. Then I launched iTunes and clicked on 'check for updates', and was told I had the latest version 11.0.1 I think it is. So, any clue on what to do? Thanks for any and all help.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • When I run the Receiving interface i get an error that the period is not open.  But all periods are open from Jun 14 through April 15.

    I am running the following inserts and all periods are open but I still get this error in the po_interface_errors table.
    "Error: Please enter a GL Date within an open inventory accounting period.
    Cause:        You provided a GL date that is not within an open inventory accounting period. 
    Action:        Enter a date that is within an open period."
    Here are the inserts.
    INSERT INTO rcv_headers_interface
    (header_interface_id, GROUP_ID, processing_status_code,
    receipt_source_code, transaction_type, last_update_date,
    last_updated_by, last_update_login, creation_date, created_by,
    vendor_id,expected_receipt_date, validation_flag)
    SELECT rcv_headers_interface_s.NEXTVAL, rcv_interface_groups_s.NEXTVAL,
    'PENDING', 'VENDOR', v_transaction_type , SYSDATE, v_user_id, 0,SYSDATE, v_user_id,
    v_vendor_id, SYSDATE, 'Y'
    FROM DUAL;
    INSERT INTO rcv_transactions_interface
    (interface_transaction_id, GROUP_ID,
    last_update_date, last_updated_by, creation_date,
    created_by, last_update_login, transaction_type,
    transaction_date, processing_status_code,
    processing_mode_code, transaction_status_code,
    po_header_id, po_line_id, item_id, quantity, unit_of_measure,
    po_line_location_id, auto_transact_code,
    receipt_source_code, to_organization_code,
    source_document_code, document_num,
    destination_type_code,
    deliver_to_location_id,subinventory,
    header_interface_id, validation_flag)
    SELECT rcv_transactions_interface_s.NEXTVAL,
    rcv_interface_groups_s.CURRVAL, SYSDATE, v_user_id,
    SYSDATE, v_user_id, 0, 'RECEIVE', SYSDATE, 'PENDING',
    'BATCH', 'PENDING', v_po_header_id,v_po_line_id,
    v_item_id, v_quantity,
    v_unit_meas_lookup_code,
    v_line_location_id, 'DELIVER', 'VENDOR',
    v_organization_code, 'PO', v_po_number,
    v_destination_type_code,
    v_deliver_to_location_id, v_destination_subinventory,
    rcv_headers_interface_s.CURRVAL, 'Y'
    FROM DUAL;

    I went to Inventory > Setup > Organizations  
    but I do not see a place to open a period under an organization. If there is another place to go let me know.
    I looked under calendars but that does not have anything to do with periods as far as I can tell.

Maybe you are looking for