After Burning options:: Disk Utility and Using Finder

I have a Burning Question.
When burning from the Finder, the dialog box I get doesn't have the same options and the dialog box when using Disk Utility. Is this normal? Is there a way to have the options available in the Finder dialog box?? It would be convenient to have the Finder eject the disk after burning, but I can't seem to find a way to turn on that option.
Screen shot using Disk Utility::
Screen shot using the Finder::
Am I missing something? I can't find anything in Preferences to adjust the After Burning options while using the Finder to burn.
Can someone shed some light on this?? Thank you.

Are you saying then that the dialog boxes I get are normal (as shown in my screen shots)? And, those options are not available using the Finder? There is no way to change the preferences for the Finder burning method?
So, whatever options you have set in Disk Utility with carry over to the Finder automatically?
Also, I noticed there is no way to set these options without performing an actual burn?? I tried to change the check from Mount to Eject and it doesn't stick (I chose Cancel), so I'm guessing it only sticks if you actually burn a disc.
Correct?

Similar Messages

My hardware RAID 1 only showing up in disk utility and not finder.

Last week I finally was able to take my early 2011 iMac in to have my Seagate 1TB hard drive replaced for the recall.
Late 2010 model iMac
OS X 10.6.8
OWC Mercury Elite Pro 4TB x 4TB Hardware RAID
When I took it in the RAID 1 was working just fine. When I finally got the iMac back and booted everything up the RAID 1 was getting the dialog box that read "The disk you inserted was not readable by this computer."
I have tried going into disk utility to see if I can verify the disk and then saw it is coming up as two different volumes... Along with those two different volumes, I can not go to click verify as it is greyed out.
I contacted OWC and they said they have never heard of this and had two solutions, to try a software like diskwarrior, or if that didnt work I can take the drives out and try another external dock to see if it is the RAID hardware.
If anyone has any ideas as to what could help with this situation that would be great as I was under the impression (and told by a number of other people) that having a RAID 1 as my backup was good and should not need anything else. I just want to be able to get all the data off then I will rebuild it or send it into OWC.
Thanks!!!!

So a fault in the Hardware Raid controller could make it not read properly? I am planning on having a good backup set up after this!
As for the screenshot, the original was not set up with the SoftRaid. When I got the computer back I installed that to see if that may pick it up and make it at least readable to save the data on it. The two in question are the highlighted 4TB drives, which befor also read as one drive as it was set up in the OWC enclosure as a hardware raid.

I used the "erase free space " option in disk utility and now my imac says the disk is full and wont let me download songs. please help!

i used the "erase free space " option in disk utility and now my imac says the disk is full and wont let me download songs. please help!

You could try repairing permissions with disk utility, I don't think you will have the option to repair the drive but you could verify it.
This may help you delete the files that DU made but did not remove when erasing the free space.
http://macosx.com/forums/mac-os-x-system-mac-software/317204-no-disk-space-after -failed-disk-utility-erase-free-space.html
When you get your SL disk it will not have the iLife applications, that would have been on the second install disk that should have been with the computer. I forget which version of iLife you will need for SL but I think it is this http://www.amazon.co.uk/Apple-iLife-Single-User-Mac/dp/B003XKRZES/ref=sr_1_1?ie= UTF8&qid=1409607702&sr=8-1&keywords=apple+ilife+11
A search of the forums will confirm or deny this.
As to whether a clean install will cure your problem, i.e. partition the HDD and install I would expect it to be yes, but there are no guarantees it is an old machine.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

Commercial
Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
Shareware or freeware
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
Disco
<http://discoapp.com/>
no longer supported, but free, simple, and runs well under SL.
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple, and runs well under SL.
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are, but runs well under SL.
Terminal Whiz Kid
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

CD burning with disk utility - format and size for 800 MB - 90 minutes CD

Hi Support,
I'm trying to burn a CD with 800 MB (90 minutes) using disk utility. When I create a new empty image I can select the size. Unfortunately there is no option for a 90 minutes CD. When I create the image with 800 MB and I try to burn it, disk utility tells me that the image is too big. So my first question is what is the maximum size for such a CD?
Next question, which format should I use? When creating a new empty image, I have the options "Beschreibbares Image" and "Mitwachsendes Image" (I have a Germann OS). But I dont't have the option to create a "CD/DVD Master", which is availabe, when I create an image from a folder. What I have to do, is to convert the image afterwards to a "CD/DVD Master". This is very circumstantial.
So my questions are:
1. Is there an easier way o create an empty disk image for a CD/DVD?
2. Is the format "CD/DVD Master" required to burn a CD. It is also possible to burn images with other formats. What is the advantage/disadvantage of this format?
3. Which format is required to use the CD in a Windows computer or a standalone CD/DVD player? The volume format must probably "MS-DOS Filesystem" in this case?
4. Is it possible to burn multi session CD's in this case?
5. Is there a comprehensive documentation somewhere available for this burning issue on Mac? The help of disk utility is really not enough.
Thanks for answers and hints Thomas

Hi thmayr!
Although the original instructions were for a 700 MB disc, perhaps the article linked to below, could be helpful.
From "Macworld" Feb 2005 issue p.90 Link To Article. Scroll to the second tip on the page: "Unix Tip of the Month: Utilize Extra Space on CD-Rs".
Content:
Create a new folder in the Finder.
Drag everything you want to burn, up to 700 MB, into the folder.
Open Terminal and type cd ~/Desktop
Press the Enter key. This changes Terminal's active directory to your user's Desktop folder.
Type hdiutil makehybrid -o myburn.iso (There's a space after the o in iso, and myburn can be any name you choose) DON'T press Enter
Switch to the "Finder"
Drag & drop the folder you created onto the Terminal window. Terminal should fill in the full path to the folder.
Press Enter. Enter key will then execute the command.
What you have done is used the hdiutil Unix command to create a hybrid disk image named myburn.iso (you can choose whatever name you like, in place of myburn, but use iso for the extension.
You should see the message "Creating hybrid image" in your Terminal window, as well as an indication of the task's progress.
When finished, you should see a disk image called myburn.iso on your Desktop.
You can use Disk Utility to burn this image, or you can type
hdiutil burn ~/Desktop/myburn.iso in Terminal
Insert a blank CD-R when prompted, and then just wait until it's done.
ali b

When I repair disk permissions using Disk Utility and it says it's completed the task, I click on it again and it repairs more. This has been going on for hours now. Could there be that many wrong permissions? Should it get to "all repaired" eventually?

When I repair disk permissions using Disk Utility and it says it's completed the task, I click on it again and it repairs more. This has been going on for hours now. Could there be that many wrong permissions? Should it get to "all repaired" eventually?

It's normal behavior. You don't have to worry about. Most of what's listed is just a report of what the utility finds., not necessarily that there is omething wrong.
If you want to find out more, read the link below, or see the More Like This links on this page.
http://support.apple.com/kb/TS1448?viewlocale=en_US

TS1338 I have 4 Trojan Horse viruses on my external drive I use for Time Machine. My MacBook Pro hard drive is clean. I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. Wayne

I have 4 Trojan Horse viruses on my external drive I use for Time Machine. My MacBook Pro hard drive is clean. I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. I am using 10.8.3 Wayne

ksu62 wrote:
The infection names are: classload.jar-719ef6a5.zip
                                          classload.jar-5db452le31.zip
                                          ar3.jar-6ce3b2f-45l483f.zip
                                          classload.jar-lef99412-63bsd3fl.zip
Those look alot like file names and not infection names. I don't find any reference to anything like that on Norton or VirusTotal. Since you said these were Trojans, I would expect to see "Trojan" as part of the infection name.
".jar" files are executable Java applets. The random alpha-numerics would seem to indicate a cache file, likely from a browser with Java enabled. And we all know what ".zip" means.
Worst case is that you had Java enabled in a browser and were infected by one of the late variants of the Flashback Trojan over a year ago or one of a couple of other attacks using the same vulnerability but targetted against a small number of political sympathizers. Much more probable is that thes were Windows only Trojans. Hopefully you have a fully up-to-date OS X, including Java, and have disabled Java in all your browsers by now.

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

I did disk utility, and verify disk and it asks to repair the disk using dvd installer...but when i insert the dvd- restart- hold c, it keep ejecting and can't read the dvd....i tried with my friends dvd too, but still fail...mac osx v10.6.7

someone pls help me

Well there is Resolve startup issues and perform disk maintenance with Disk Utility and fsck witch includes step by step instructions to run disk repair without the install disk.
But before doing that, it's a good idea to backup. You may want to troubleshooting your superdrive / disk before hand. if I disk repair fails you may need the disk working to re-install the OS.
Dose the computer read any DVDs? if no, you may want to use Troubleshooting the slot load optical disc drive.

My Safari quits unexpectedly. I recently ran "repair permissions" is disk utility and I think it started after that.

My Safari quits unexpectedly. I ran "repair permissions" in disk utility and I think is started happening after that.

Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues

Erased free space in Disk Utility, and after it finished it kept a DMG there.

I erased free space in Disk Utility, and after it finished it kept a DMG there called "DeveloperDiskImage.dmg", why is it left behind? can it be deleted? how? if erasing free space is supposed to help get memory and remove all the files truly, it shouldnt be creating anything, it created a DMG at the start, but it went away, after a hour and a half it made the DeveloperDiskImage, i went to eat dinner and when i came back it was done but that was left.

Delete it. Erasing the free space isn't supposed to free up any space; it's there in case someone deleted a file insecurely when they meant to securely delete it.
(65417)

Disk Utility and repair permissions problem after upgrade 10.5.1

*Problem with Disk Utility* - +repair permissions don't work anymore+
After upgrading to OS X 10.5.1 tried to correct permissions with Disk utility. But I'm not able to repair permissions, because I get this message every time "fault: The underlying task reported a fault at concluding." and permissions repair stops. Has anyone else had this problem and does anyone have any idea how to get this working again?

Will try installing OS X 10.5.1 again from the downkoad that you recommended. Won't be able to do this untill after the New Year but I'll let you know if this helped. I had another problem after he 10.5.1 upgrade and that was that the Security update 2007-009 also refused to install. Could this be related too the problems with Disk utility and the permissions problems.

Leopard Disk Utility and Input/Output error messages.

This post is describing a problem I had and how I managed to fix it. When I was researching the Input/Output error message I was getting a couple of people had mentioned this fix on the apple discussion boards, so I thought I would add my fix to support them. (Isn't google fab!) I've no idea if this is the right place for this so please bear with me.
Okay a bit of background:- over christmas we treated ourselves to leopard and as my laptop is now three years old I decided to do a complete reformat and installation. I used my 60GB iPod as an external harddrive and backed everything up. Installed Leopard no probs and was a very happy bunny.
The problem:- I then wanted to remove everything off my iPod. So I thought "I know I'll use Disk Utility".... I tried it with the 'default' setting and got an Input/Output error message straight away (irrespective of whether I did it as an extended journal or not.) When I tried it with the Zero Out option (can't remember exactly what it's called) it came up with the Input/Output error message right at the very end. Argh! iTunes and Finder no longer recognised it, but Disk Utility did.
My research:- After using google I saw some guys on here talking about formatting proper external harddrives using leopards disk utility and they were getting the same messages as me. It turns out it is a fault with Leopards Disk Utility. So I did what the guys recommended.
The solution:- (Thank god I had tiger!) I put in my tiger installation disk, clicked 'install tiger' and restarted the laptop. I clicked my my language, but then rather than going through the actual installation process I went to the top menu bars and chose Disk Utility (using tiger's disk one rather than my laptop's leopard one.) And erased the iPod there. Now when I quit the installation and opened my laptop up properly it worked, both iTunes and finder could see it!!! (I just had to restore my ipod in itunes - and now I'm happily transferring all my music back!)
I hope this helps someone in the same position as me!

I took it to work to use my Windows PC to try and format the drive, but got the same problem. I figured either the drive (it's a 2.5" that used to be inside my AlBook) or the external housing it lives is was faulty. Only way I could test without spending more money is by putting the 2.5" drive inside my powerbook, and booting the (Ti) powerbook from a bootable firewire ipod. I successfully booted from the ipod, and had the same problem with the now internal drive: only visible in disk utility, any attempt to erase fails. Also, I plugged the small 10 GB drive that WAS in the TiBook (but which I removed to put the other, problematic drive in) into the external housing, and it connected to other machines just fine.
Turns out the problem is the hard drive itself.
So now my question becomes: If disk utility can see the hard disk when it is connected (I have it back in the external enclosure now), but gives "input/output error" messages when I try to erase/format it, is there any way I can salvage this drive? It's an 80 GB drive, and I was looking forward to making it my internal TiBook drive (replacing the old 10 GB drive that's in there now).

Disk Utility doesn't find any of my USB drives

A few weeks ago my just stopped showing any of my external drives when I plug them in. I can not see them in Disk Utility or in Finder. A while ago I had TUXERA NTFS installed and today I got those messages after plugging one of my USB drives. Is it possible that the problem comes from this program and should I delete it or what should I do in order to be able to work with my drives again?
Thank you

If you want a reliable and better NTFS driver, because you need to maintain NTFS to share the drive and use it with Windows, then I strongly suggest and use Paragon-Software NTFS for OS X (v. 11 at this point Im pretty sure, supports Mavericks).
You are not in MacBook Pro forum.

CD-R burned w/ Disk Utility does not show on desktop

I've been burning file-backup CD-RW's in the Finder, but decided to try creating a multi-session CD-R in Disk Utility. I was thinking that I would still be able to access the contents of the CD like I can with CD-RW's, but now that I've burned the CD, it won't show up on the desktop! (Yes, that option is checked in Finder Prefs.) It shows up in Disk Utility, and I tried to create a disk image of the CD to save on the desktop, but the "Image From (Select a Device)" option was grayed out even when I had the disk selected.
The only thing I can think of is that perhaps the disk wasn't the right format? Is this the kind of behavior I'd see if that were the case? Any other ideas?
I still have the files I burned to the CD on my hard drive, so it's not like I'll be losing anything major if I can't get this to work, just wasting a CD. But I sure would like to know what the problem is!

Yep, that fixed it. Thanks so much! Funny how such a
simple thing fixes matters like that. This is the
third time deleting a preference has fixed a problem.
Computers!
Glad it worked. Another poster had suggested this to me when I was experiencing similar issues.
Ted

After Burning options:: Disk Utility and Using Finder

Similar Messages

Maybe you are looking for