After Burning playlist - Playlist shows up blank?

I just recently purchased a new external cd/dvd burner (HP DVD 1170e), my original burner burned out, and I seem to be having trouble burning from a created mixed playlist. I've tried this a couple times and the results are the same. I create a playlist with a mix of various artists and click on burn playlist....it goes thru the motion of burning the playlist, even finalizing, and when it's done it shows up as a blank cd.
I have burned cd's that are of the same artist and title (ie YES - fragile) and that works...but when I go to create and burn a mixed cd it always comes up blank - Please help. This is starting to get really frustating.
Thank you in advance.
Cheers from Seattle!!
Rick

Sounds like your boot image is missing network drivers...
Couple of checks though:
If the VM in case has already been introduced somehow to ConfigMgr, check Devices -node from the console and search for "Unknown", if there are objects named "Unknown" (not the default x86 or x64 objects!), delete them
Add command line support (F8) to your boot image
Boot your VM, as soon as you get in to WinPE, hit F8 to open command prompt
Run ipconfig to see if the VM get's IP address
If the VM doesn't get IP address, you probably don't have the correct network driver in your boot image. You can obtain the correct driver by installing OS (the same architecture as you boot image, and based on the same FullOS of your boot image, ConfigMgr
2012 RTM=WinPE3.1=Windows 7, SP1=WinPE4.0=Windows 8, R2=WinPE5.0=Windows 8.1) on to your VMware VM and then use this tool:
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d to capture the needed drivers. Then you can import those drivers to ConfigMgr, categorize them and add the LAN and SCSI drivers to your boot image.

Similar Messages

After burning a slide show, I get a skip in audio

After burning a slide show, II get a skip in the audio about every 5 min. of run time. I imported the pictures from i photo and the music from an itunes play list. When I play the entire thing in preview it runs fine with no problems, but after burning to a dvd, I get a skip every 5 min. I burned to hp DVD-R (16x) and Memorex DVD-R (16x). Still the skip. I have burned to Best preformance, High Quality and Professional Quality. I have even slowed the burn time to 4x. Still the skip. I noticed the bar at the bottom of the screen always reads 5 min. for the audio duration and when it goes back to 0 is when it skips. The run time when I put the cursor on the audio well reads the correct 3min:35sec.

SlideShow function in iDVD - is limited to 99 photos per show.
Creating the SlideShow in iMovie HD6 or FinalCut - doesn't limit this but offers 100% control over process (audio and transitions)
Using iMovie'08 or 09 or 11 - will degrade picture quality as they only deliver every second line over to iDVD.
I never use "Share to iDVD" in any iMovie version.
• iMovie up to HD6 - Just close it and import movie project from within iDVD
• iMovie'08 to 11 - "Share to Media Browser" and as Large (not HD) will give as good quality as they can do
Yours Bengt W

Computer freezes if I don't remove CD immediately after burning playlist

Hi - I suspect my iTunes application is corrupted somehow. If I don't remove a CD immediately after I burn it, my whole computer freezes. Also, CDs that I burn show up with a mislabeled name after they're burned. How do I go about uninstalling iTunes, but saving my rather substantial (3,000 tunes) library?
Thanks for any help.

Hi kelly003... Boot from your Tiger installer disk, select your language and then from the menu>Utilities select Disk Utility. select your hard drive from the left side and then Repair Disk. see if that straightens out your issue.

Playlists show as blank - but play normally

iTunes is showing all the playlists, but none of the actual songs are showing, regardless of which view (list, grid, cover flow) is selected. However, the bottom of the window does show the right amount of music (count and size) and if you click play, the right songs play from the selected playlist.
Tried moving everything from the Music:iTunes folder to a safe spot and letting iTunes create a new library and then reimported the music and the same thing happens. Plays but does not show.
What am I missing?

Just as another test, try loading a movie/video DVD and see if it
mounts and shows up properly.
If it doesn't, then there is a good chance the drive is dead or if you
are lucky, just dirty optics that need cleaning.

Trouble with CDRs after burning playlist

Feeling in a Christmassy mood, I compiled a playlist of songs, some imported from CD, some bought from iTunes store & some downloaded from MP3 Rocket Pro.
Playlist is fine on PC, but on listening to discs, all the tracks start part way through. I have tried both single use & re-recordable CDRs.
I am quite new to i-Tunes, but I don't think I'm doing anything stupid, and its beginning to drive me nuts, now!
Any advice would be gratefully appreciated!

Hi m
When not knowing what to do.
There are a set of things to test:
1. Free space on internal (start-up) hard disk: It should have 25Gb or more. This is especially important when running iDVD.
iDVD can’t address any other hard disk as scratch-disk so space is of uttermost importance.
2. The Hard disk is untidy:
Repair Permissions (Apple Disc Util tool) - Run this
Repair Hard disk (Apple Disc Util tool) - To run this You need to start from a CD/DVD or external hard disk.
3. Delete iDVD pref file - or rather start a new user/account - log into this and have a re-try
4. Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help.
5. Program miss-match:
iDVD 5.0.2, Mac OS X.3.9 AND QuickTime 6.5.2 - is OK
iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4 - is OK
iDVD 7.0.1, Mac OS X.4.11 AND QuickTime 7.4 - is OK
6. UPDATES - is important: iLifeSupport8.1.1.dmg is important for running iLife08 bundle.
7. iDVD (08) Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
8. Mac OS X.5 (Leopard) - at least iDVD 1 to 4 - don’t work any more
9. Trying to collect info on. Leopard system:
iDVD08 - - - - - - - - - - not working - - - -> Should be soluble
iDVD 6 - - - - - - - - - - not working - - - -> Should be soluble
iDVD 5 - - - - - - - - - - not working - - - -> Don’t bother - will not work
iDVD 4 or previous - - not working - - - -> Don’t bother - will not work
Yours Bengt W

Burned DVD's Show as Blank in Finder

I have a unique problem here, I think. I have burned a series of Memorex DVD's using Toast 8. They burn successfully and mount after the burn is complete. However when I go back to use them again, they do not work and mount in finder as Untitled CD.fpbf.
If I eject and insert the DVD's over and over and over again...sometimes they will finally take and the data will actually appear.
I have tested out the dvd's on other mac's and they do the same thing. However, I have tested them on a PC and they load perfectly. And I have tested them on a Macbook Pro with Parallels...and in Windows XP Parallels they load perfectly, but DO NOT load in OSX. Weird??
Im not convinced that its bad memorex media, because the problem should exist across multiple platforms if its bad media. And it doesnt.
Any suggestions besides changing media or getting an external dvd writer? I have taken this to the Apple Store and they dont seem to care the least bit.
Thanks!
Message was edited by: Craig Berry
Message was edited by: Craig Berry

I wish I could help you, but want you to know I can relate - see my earlier post today.
I cleaned the laser lens today (thinking that might help), and burned another copy (from an existing mac the ripper file)- the dvd mounts and plays after the burn in PopCorn, but once I eject it, the mac continues not to detect it and (r)ejects it.
The dvd plays great in the TV's dvd player, which means the cleaner worked sort of, because before the laser lens clean, it played crappy in a regular player... now it works great, but that's not the idea, i.e. the mac should play the dvd!!
There's gotta be a solution other than replacing the superdrive, and memorex (I've used a million times before) may not be the best brand, but it seems to work just fine elsewhere. Why would it burn and NOT play only on the mac?

T60 won't resume windows xp properly after standby and hibernation - shows only blank desktop

Hi
I've got aT60 195CTO which is still just in warrantee that when I hibernate or standby the laptop and when i resume it'll ask for a password after the normal wait but then it'll just sit there show desktop background with no icons etc and periodically show hardrive activity but nothing happens, the touch pad pointer works ok but nothing else, even ctrl alt del failed to do anything, have downloaded and installed all xp updates inc sp3 as well as thinkvantage updates everytime this happens i'm forced to shut down computer by holding power button and restarting this is very annoying and always has the possibility of loosing work.
There appears to be two power management schemes in operation?, one running under xp and the other under thinkvantage - not sure if there is a conflict here? I have tried going into hibernation by closing the lid, fn-F12, xp's shutdown menu and entering hibernation from the thinkvantage menu all with same final result.
I have found a number of other postings on the net about this same problem but but apart from reloading the os which failed to solve the problem no other advice appears to be available.
would really appreciate any advice from anyone who knows how to solve this problem.
Regards
Paul

No Not really had some success though completely uninstalled graphics card software and reloaded new software also found out that it was the XP wireless software was doing something when connected to my school network so quick fix was turn wireless off then log into computer then turn wireless back on to resolve this cause I always forgot to turn it off I set up the lenovo wireless manager this worked and will only periodically do it (though I never really turn my computer off unless upgrading etc and sometimes it clogs up) another problem with mine was the battery could have been a issue cause I never turned it off and let it discharge (I wouldn't t recommend doing that unless battery is in warranty) first time I did discharge it it would not recharge so I may have had a faulty battery heard about the non-rechargeable coin battery maybe another member could confirm that? This could have been contributing to the issue
Hopes this gives u a variety of solutions to try help desk at lenovo had no idea when I told them about it and couldn't do much but tell me to update bios if it continues I suggest u ask it to be looked at and before warranty expires
Just received new 9 cell battery today will update to see if that was the issue

Lightroom 5.5 not showing photos after CC update! Showing gray blanks instead!

I updated LR to 5.5 yesterday through the CC installer.
It runs. But no photos could be displayed! All gray blanks!
In the Dev Module one could see the historgram normally and play with the slides even. But no photo at all. Just gray previews!

LR 5 can't read the LR CC catalog.
When you installed CC, it made a copy of your LR 5 catalog, in the same folder.
So use File > Open, and point LR 5 to the old catalog.

I am trying to burn a cd from my playlist but after inserting my disc I do not get (burn playlist to disc) from drop down menu

I am trying to burn a cd from my playlist but after inserting my disc I do not get( burn playlist to disc) from drop down menu?

Hollie,
Do things in the following order:
Make the playlist you are going to burn, and open it.
Have the blank CD-R handy.
Use the command File > Burn Playlist to Disc.
When it asks you to insert a blank disc, do so.

When I try to burn music from my Playlist to a blank CD, the notification tells me that the list has too many minutes for the CD, even if I try to burn just one song. What's going on?

WHEN I TRY TO BURN MUSIC FROM MY PLAYLIST TO A BLANK CD, THE NOTIFICATION COMES UP AND TELLS ME I AM EXCEEDING THE NUMBER OF MINUTES THE CD WILL HOLD. THIS NOTIFICATION HAPPENS EVEN IF I TRY TO BURN JUST ONE SONG. WHAT'S GOING ON?

Katy, you are completely doing things in the wrong order. You can't burn songs if you can't even play them, and iTunes can't play them if it can't find them.
The exclamation point normally occurs if the song file, or one of its containing folders, has been moved, renamed or deleted. So if you encounter a track with an exclamation point, don't do anything else until you find the file. It is usually somewhere else on your hard drive, or else in the Recycle bin. Failing both of those, get it from your most recent backup.
After your restore it, make sure it can play. If it can play you can put it into a playlist. Then you can burn the playlist.

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

TS1436 when i try to burn a playlist to a blank cd it asks me all the right questions says it is initialising the burn then ejects the blank cd it never used to do this but always does it now so i am unable to burn cds

When i try to burn a playlist to a blank cd it asks me all the right questions and appears to be doing it then the message 'initializing burn' comes up and the cd is ejected it never used to do this but always does it now so i am unable to burn cds. Can anyone help?

When i try to burn a playlist to a blank cd it asks me all the right questions and appears to be doing it then the message 'initializing burn' comes up and the cd is ejected it never used to do this but always does it now so i am unable to burn cds. Can anyone help?

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

What kind of CD are you burning (Audio or MP3)?
If you're burning an MP3 CD, the songs must already
be in mp3 format.
If not, iTunes will tell you that you have no songs
in the playlist.
M
I was making an audio cd. But I have since found out what the problem was. The files in my PLAYLIST I converted to aiff, since they were SDll files (I thought they were similar to AIFF, and they PLAY on Itunes...just won't burn.) When I selected the songs in the playlist and converted them...I thought all those files were converted, They were not. The converted files went into my LIBRARY, even tho I selected the ones in the playlist...and once I exchanged the SDll versions of the songs in my playlist. THEN they burned fine...but still...it's confusing..you say convert..it says it's been converted..and what they don't say is it's not been converted inside the playlist...where I had selected the songs...It just ADDED aiff versions..but only in the library...Anyway, that's what happened. But it's strange that it PLAYS SDll but won't burn them....and you'd think, logically..the ones you selected would change...but they don't. Playlists are mainly pointers to the actual files I guess...a sort of Alias..
At least it works now. But it's sad that the latest itunes does more, but also does LESS...as I used to be able to burn SDll files. Now I'll have to convert all my files to AIFF, and mp3's as I assume my ipod video won't play anything but mp3's?

Why do I keep getting a message "insert blank disk" when trying to burn playlist to cd?

Why do I keep getting a message "insert blank disk" when trying to burn playlist to cd? I can import burned cds to iTunes just fine, but cannot burn playlist to disk.

because you have to be using a blank cd-rw or cd-r.

How do we now print off the Jewel Case Inserts after burning a Playlist to a disk?

How do we now print-off a Jewel Case Insert after burning off a Playlist to Disk?

Hi McQuerty,
If you are having issues printing a CD insert from iTunes, you may find the following article helpful (it is aimed at iTunes 10, but should still apply in iTunes 11):
iTunes 10 for Windows: Print CD inserts and song or album lists
http://support.apple.com/kb/PH1663
Regards,
- Brenden

After Burning playlist - Playlist shows up blank?

Similar Messages

Maybe you are looking for