After burning view on tv is not the same as in project panel

I captured a old black and white VHS recording, taped from television, in adobe cs5. It looked good in the project.
I send it to encore and burned the project to a DVD. When I looked at the DVD on television the black is ok but the white became very shiny.
It is hard to see faces, they became almost white. In the project view panel the colors are ok.
So is there a filter in Adobe that i can use or has it something to do with the settings?
I captured in DV pal 720/576 (1,067) 25 fps.
Thanks in advance!
Monique

Thanks a lot. I made some adjustments on my tv and problem was solved!!!
Monique.
2011/6/26 Bill Hunt <[email protected]>
Monique,
>
The answer to John T's question will possibly leas us to a way to improve
things.
>
Harm's comment on the Program Monitor on you computer's screen points to
part of the issue - you are judging the gamma of the Video on a device that
is not the ultimate, though it can be useful, if one takes the limitations
into consideration. The better method of judging all aspects of quality,
would be to feed the signal to a calibrated TV, rather than the computer's
monitor. However, this is something that is done in a professional editing
suite. Though not involved, there are some hookup details that must be
considered, and then buying a proper TV and calibrating it, is a bit
involved.
>
Once we know the exact workflow used to digitize and acquire the VHS
material, there are probably a few recs., that will help you get better
quality.
>
Then, if you only have the Program Monitor to judge quality by, there are
some tips that others can offer, and possibly a few Effects in PrPro, that
will allow you to improve things.
>
The more detail that you can provide, the easier it will be for someone to
point you in the right direction.
>
You might also want to look over this *
http://forums.adobe.com/thread/615047?tstart=0* on digitizing analog
source material.
>
Good luck,
>
Hunt
>

Similar Messages

About viewing images that are not the same dimensions as the iPod screen

I sent some images to my iPod via email. I saved them to my photo library. When I went to look at them, I noticed something odd was happening: my iPod is sort of 'stretching' the images so they fit the entire screen of my iPod, even if that means a) cutting off parts of the image (either top and bottom or the two sides), or b) is stretching the dimensions of the image to fit the screen--I can't tell which is happening, though I think the former.
I can view the image correctly by pinching it a bit, but if I move to another image and come back, it's back to being stretched.
I know that in Photoshop I can add a black boarder (either top and bottom or on the sides), so the image with the border matches the dimensions of the screen, but that seems like a pain in the rear to do with each image. This seems like an odd quirk of the iPod, given that they are trying to use the camera and image viewing as a selling point.
Is there any setting on the iPod so I can keep it from doing this (I noticed that it does this even with photos I take with the iPod camera, because they have slightly different dimensions than the screen)? And if not, does anyone know the ratio (side to top) or resolution (in pixels) of the screen so I can match it.
Thanks, David

So generous people; thank you for your time.
I visited the camera store and we discovered that my camera lcd was set to the maximum brightness level which completely distorted any understanding of my exposure. What I now see on the lcd in terms of ligt and shadow is very similar to what I see on my computer screen.
Maybe you can shed light on this:
I also may need to just upgrade my imac. On the camera store's late model imac my images were tac sharp but on my imac they look quite soft and still have less light.
There is also still some difference in terms of color settings. My camera's colors have a brighter pinkish tone and on the camera store's imac and mine the tone is yellowish orange.
I will try DPReview and Nikoncafe. My first step is to reset my cameras to factory defaults and then upload and compare.
Thank you both for your help

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

Why are my iCal events not the same across views?

Help! I've been editing my iCal in Month view and everything looks great... but then I look at the day view (or week, whatever) and it's not the same. For example, in Month view for July 2 - I have one event scheduled from 8:30-noon. Then I look at the day view... and there are 8 different events! Most of them duplicates of different things that I had at one time or another deleted or changed. Why didn't the "clean up" work that I did in the month view carry over to day or week view? In fact the opposite, there are more things in day or week views than I ever created.
Recently upgraded to Lion from Snow Leopard. Recently changed from mobileme to iCloud. I only have iCal set to my iCloud account (no "on my mac" iCal calendar data). So the problem I see when editing on my MacBookPro is also seen when logged into iCloud directly via Safari and on my iPhone, iPad, etc. At first I thought this was an iCloud syncing error because I only noticed the difference on my phone (list view)... but when I went back to my MacBookPro I realized the problem exists there too... so doesn't seem to be a syncing error, but rather a "view" error... then the "problem" is mirrored everywhere.
I've tried "refresh" and "refresh all" from the Calendar drop down menu. This does nothing to help the problem... not that I really expected it would.
Thanks for any help you can provide. I'm going crazy!
Mac OS X 10.7.4; iCal 5.0.3

Fixed my own problem. Ultamately a user error but tied to the many threads about the month view defaulting events to "all day" vs. hourly increment. I knew that was the case, so when editing events from month view I made sure to add/change the time, but negected to look at "To" date. If my event was for an hour, simply adding the hour pushed the day to span across dates so the event was really 25 hours. Looked OK in the month view (just showed as a dot) but the day and week were all filled and casued the event to appear twice on the second day in list view (iPhone). In the case of repeat events, sometimes "To" date ended up as the end date for the repeat cycle... which really messed every thing up... I believe causing what looked like duplicates, etc.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Is there a photo album app that let's you add a photo to an album from the full-screen view of a photo, not the just thumbnail view?

Is there a photo album app that let's you add a photo to an album from the full-screen view of a photo, not the just the thumbnail view?

...It's just really annoying to try to organize photos into an album when you can't see the full screen version of the photo... especially if you have several similar-looking photos, and you can't tell the one you want from looking at 40 thumbnails on an iPhone screen.

Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?

Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?
I'm planning to purchase the 6 plus, but I need to know from where.whom will the fix for this problem emerge.

My new iPhone 6 paired perfectly with my Mercedes system. That said, on your iPhone 5, reset your network settings and then try to pair it again.

IPhone 4S will either show 100% battery or dead battery right before shutting off, nothing in between. Has iOS 7 now after restore and is continuing to do the same thing as when it has iOS 6. Frustrating, like not having a fuel gauge on your car!!l

iPhone 4S will either show 100% battery or dead battery right before shutting off, nothing in between. Has iOS 7 now after restore and is continuing to do the same thing as when it has iOS 6. Frustrating, like not having a fuel gauge on your car!!l. Purchased around March of this year so not very old, never wet, damaged, etc.

Read: http://www.forbes.com/sites/larrymagid/2013/09/27/how-to-preserve-battery-life-i n-ios-7/?partner=yahootix

View in 9 not the same as view in 7 or 8

We have a pdf file that when opened in viewer 9 looks different than the same file opened in 7 or 8. Has anybody seen this before? Witch one is correct? Any help at this time would be great.
Thanks Sy

Hi Sy,
I'd suggested checking the Page Display Preferences and see if there are any differences in the settings. Select the Edit > Preferences menu (Windows), or the Application* > Preferences menu (Mac). Next, select Page Display from the Categories list box. Someone may have configured something differently here that's causing what you are seeing.
Good hunting,
Steve
*Application will be either Acrobat or Adobe Reader

My exported edited image in TIFF-16bit is not the same as my edited RAWfile

Hi! First and foremost my problem is not speed. I have learn to deal with Aperture's slowness while editing or exporting images and not real time brush strokes and occassional crashes. It thought me PATIENCE!
My problem are my exported image from Aperture, The images are not rendered the same exact way as the RAW image I edited (quality-sharpness-saturation-definition-etc.) in Aperture. The rendering is WAY OFF. I even exaggerate in Sharpness and contrast in rendering my RAW images yet my exported (both TIFF -16 bit or JPEG orig. size) are way softer than the one I originally rendered in RAW at Aperture 3.0.2. Even the COLORS are OFF-saturation, luminance, etc. It's not my Monitor or my Eyes, I asked 3 friends to help me validate my concern. After viewing my exported (TIFF or Jpeg) images on an external preview browser, I re-import them to Aperture and put them- (the exported images) in the same Projects where the Original RAW file is located, then I carefully compare them in Full Screen view, I can totally say that they're not the same quality, sharpness, saturation, tonal value!
It's very frustrating to experience this. I work really hard on every single image, I tolerate the sluggishness, the crashes, All I want are my image output render the way I rendered them in RAW file in regards to sharpness, color value and just the overall look that I wanted in my images. BTW I just downloaded the recent March 22, 2011 update. But still it's still having this problem.
Please help me all you good knowledgable, compassionate Aperture experts help an Aperture user in distress.
Thanks for your time. I appreciate any positive feedback and help.
JC

Richard,
You are not going crazy, this is a well documented throughout the web
Sorry, but the web is not documentation for Aperture.
I cannot understand why Apple have not resolved this
For one, it takes time to fix a bug, and the have to know about it. Have you told Apple that this is a problem through Aperture feedback? Second, someone at Aperture has to prioritize what their engineers work on. Since this does not seem to be a problem for very many people (including the well-regarded contributors whom you were trying to offend in your other post on this topic), it may turn out that it has a low priority for Apple.
Please Apple sort this out!
Apple does not contribute to this forum and there's no reason to believe they will read this particular message and make a bug report.
nathan

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

My iPhone serial number and IMEI is not the same as Apple server

Hello,
My problem started when I want to unlock my iphone 3gs via Imei.
My old iphone broke about a month after i bought it (it was 2 years ago), so i sent it to Movistar to change it (i think that they sent it to appleCare). Now Movistar told me that i have to send the old iphone imei in order to unlock the iphone i have now, i ask apple for the repair order receipt, then i received an email and i could see the information about the 2 iphones: the old broken one and the new one.
Then I realized that the iphone they sent me as a replacement (the new one) is not the same iphone i have. The serial number and the Imei are different, so, should apple change this data in their server in order to unlock my iphone or what can i do to solve it?
There is any formal way to perform this data change?
Thank you in advance,
Francisco Marzabal

Here we work with repairs for devices that does not have waranty (expired or other issue). In this case, I did the screen replacement. No other ipad was on my station, the ipad arrives, i took it change the glass, put everithing back, give to customer. Thats it. The job was done by me, the customer test his ipad in front on me, works fine, everything ok. Few days pass and he came back saying that it wasn't his ipad, he brings the box that the ipad came and ask me why the serial number does not match the serial number in the box (sorry NOT in the back of the ipad).
There were no other part changed only glass. After 7 years working on this, thats the first customer complaining about a work done here. After this I was curious and look for more information and some forums, also one port here is claiming that the serial number on the device is not the same as the box where it came.
I just want to make sure that there are possibilities that there could be such mistake during the packaging process.
Thanks for the replies

My UI is not the same as that shown in the Mozilla website..why? (i.e home button still on left hand side of screen and no bookmark icon)

I was using FF 4 Beta and applied the update ... I noticed that my final version was not the same as shown on the website so I removed the beta setup file and took off all versions of FF cleaned adn restarted my laptop and then reinstalled a clean version of FF 4.. however my final* version is not the same as shown still. Is this right or do I need to do something else :(
Examples of what is different is the home icon remains on the left hand side of the screen next to the back button and I do not have the bookmarks icons which from the website should appear on the right hand side next to the new location of the home button.

Look you can customize it very easily.
Press Alt+V to have the View Menu -> Select Toolbars -> Click on Customize -> Now drag the Home Button to anywhere on the toolbar and pick the Bookmarks Button from the available icons and put it in the toolbar.

I'd copied some pictures from a PC to a folder in Finder in my new iMac. The 'Date Created' in iMac is not the same as the 'Date Created' in the PC. Why? Is there a way to fix that?

I'd copied some pictures from a PC to a folder in Finder in my new iMac. The 'Date Created' in iMac is not the same as the 'Date Created' in the PC. Why? Is there a way to fix that?

View Menu -> Sort Photos is a good way to start.
Some organising possibilities in iPhoto:
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums extensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 50k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.

Safari logs me out of logged in web pages - not the same problem as other similar post - please read.

Before you crucify me please read the problem I've outlined below, because it's not the same issue other people are having. I did research the forums for the particular issue I'm having and it's not the same as what's already been posted. Please let me explain.
Here is my machine info.
iMac running Mac OS X Lion 10.7.5 on 2.5 GHZ Intel core.
Safari Version 5.1.7
I run two instances of Safari. I will have 1 safari browser window open on the left side of my screen with 7 tabs all on pages that require login. I run a second instance of Safari on the right side of my screen with only one tab open logged into 1 web page.
Here's what happens. Ocassionaly when switching the focus from one browser to the other all of my logged in web pages will refresh and I'll be logged out of all my logged in web pages, on both open browsers. There's never a certain amount of time that this happens, I've had it happen 3-4 hours into my work day and I've had it happen 10 minutes into my work day. I've also had this occure when I'm putting the focus from one browser window to the other and then I go to resize the width of the window I just put the focus on.
I'm thinking that there must be some setting or short cut "gesture" built into Safari that I'm triggering to make this happen, however I have looked at all the settings and can't seem to find anything that would cause this.
Any help or advice is apprecaited.

BDAqua - I have two Safari windows open - I guess in my semi technical mind that equated to two instances. But your probably right, just one instance of app with two windows open.
About two minutes after I posted my question, I was doing some work in one of my tabbed web pages, as I pressed the submit button to update the record on that page and as the page was refreshing I clicked my mouse on the second open Safari window to put the focus on that window, as soon as I put the focus on the second open browser I got logged out of all my logged in tabs in both windows.
The time it happened was sometime between 14:30 and 14:35
I'm looking at the Sytem Log. IN the filter I typed Safari and nothing came up from today in the log.
Just looking at "All Messages" between the hours of 1430 and 1435 their are no messages about safari, just the following.
1/10/13 2:32:22.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero

After burning view on tv is not the same as in project panel

Similar Messages

Maybe you are looking for