After cd burn, burn no longer available

After burning a data CD, CD burn is grayed out and I can not burn any other data CDs. I am an administrator, so the Help solution is not helpful.

Hi @John-Davis ,
I saw your post regarding the option to boot from CD no longer being an option in your BIOS. I will be happy to help. Let's start with testing the DVD/CD ROM or optical drive. This HP document Testing for Hardware Failures will show you how to access the UEFI tools that come as part of your initial setup. Under Components Tests there will be a one for the Optical Drive. Run that to see if the optical drive has failed.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

How do i burn a DVD on my MacBookPro OSX 10.9.1 when iDVD is no longer available?

How do you burn a movie from iMovie on a MacBookPro OSX10.9.1 when iDVD is no longer available?

Buy iDVD.
Yes, there are other programs that will put a movie on a DVD. I have tried most of the other substitutes. None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
IDVD is easy to get. It is available on disk as part of iLife 11.
IDVD is a wonderful piece of software and well worth the low cost of $40. (works with all Mac OS 10.5 to 10.9.2)
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219

Just installed 10.4.9 - My LITE-ON DVD burner no longer will burn DVD-DL

I just installed 10.4.9 (I knew I shouldn't have..) and went to burn a Dual Layer DBD with Toast 8.0.1 and it won't burn -- it recognizes the DVD as D/L - but won't write to it (It thinks it does and immediately says "Writing Lead Out"...but nothing was written.
I have tried other burning applications, but no go. However, I can burn DVD Single Layers no problem...
What did 10.4.9 do and how??? I burned some D/L DVDs last night...is this just a coincidence??? Hard to believe it would be...that just after installing 10.4.9 my DVD burner no longer burns DVD D/L!!
Anyone else have this problem?

i have a G4 500mhz AGP mac (upgraded to a 1.6ghz processor via a NewerTech card) with an internal CD/DVD player (not burner) and i have an external LaCie CD/DVD burner (the LaCie CD/DVD burner is only about 4 weeks old and i've burned maybe 8 to 10 DVDs on it)
i have had NO problem reading any DVD disks until just about a week ago.. i had bought a new Graphics DVD and it worked the first time i put it in the DVD player... the second time it would not work... (((this was the start of the problem of the purple-ish DVDs not mounting))) so, i thought i had just bought a faulty DVD, they replaced it and the new one still will not work at all.. the DVD will NOT work in my internal DVD player AND it will not work in my LaCie external DVD burner/player...
the internal drive just spins for a few minutes and the kicks the DVD out... the external LaCie drive spins for several minutes, then i finally get a message saying the disc is not readable.
what i have noticed is that any DVDs i put in will mount as long as they have a silver surface.... if the surface is purple-ish color, those are the DVDs that will not mount and keep ejecting
even DVDs that i have burned on the external LaCie DVD burner will not mount in the internal drive OR the external drive...
as i said, all of the DVDs that will NOT mount are the one's with a purple-ish surface... maybe that has something to do with the problem....
something must have happened somewhere because these purple-ish DVDs did used to work... i even did a brand new install of OS X.4 on a totally seperate hard drive and these purple-ish DVDs STILL would not work...
even booted into MacOS 9.2.2 and the STILL would NOT mount....
ANY info would be helpful...

DVD burner no longer working on Touchsmart 600

I hope this is the correct forum. I have a Touchsmart 600 series and my DVD burner no longer reads DVDs or CDs, either digital, music or video. When I attempt to burn a DVD through Windows Media Player, WMP goes through all the motions of burning it but the CD is still blank. It had been working intermittently up through September and stopped working in November. The DVD burner didn't always work since I got the machine 2 years ago. Sometimes it would stop reading the disk but would work after a reboot. Now it won't even do that.
I have updated the drivers for it and it didn't seem to have an effect.
OS: Windows 7

we have lots of docs on HP.COM and there are a lot of steps in them - I'd try them here are a couple links:
can't read:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01897812&tmp_task=solveCategory&cc=us&dlc=en&ju...
Can't write:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01897819&tmp_task=solveCategory&cc=us&dlc=en&ju...
good luck
bill
I'm a HP employee

IDVD Quitting During/After Initial Burning

I'm am having random problems burning projects. I just successfully burned a project that had only 1 menu and 1 QT movie w/o chapters (20 minutes long) but iDVD quit immediately after. A real pain as i need to make multiple copies and now have to wait for asset encoding again.
I also have been having trouble burning other projects that have 2-3 menus, a short QT movie in the menu and a 40 minute QT movie with chapters as the main movie. These projects keep quitting during the burn and nothing is getting on the dvd.
Any ideas? Thanks.
10.4.3
iDVD 4.0.1
50 GB free space
iMac G4 Mac OS X (10.4.3)

Ok, so now i've tried quitting all other programs and rebooting before burning a dvd. iDVD is still quitting after successfully burning a project. I need to burn more than one disk though and don't want to wait for the encoding again.
Can anyone offer any advice as to how to fix this or any other options? Thanks.

Links to external files do nothing after being burned to disk

I built a product catalog a while ago in CS4 and now I've had to edit it in InDesign CS5. With InDesign CS4, everything worked fine. The files were linked and then all the file were burned to disk, all the files worked on the disk (links, etc). I have since edited the files in InDesign CS5. I build the catalog, created all the links (interior within the same pdf, links to external pdfs and other file types). Everything works on the computer but somehow fails after being burned to disk.
My sequence was like this:
Set up product catalog last year with links and files, everything was fine and worked as expected.
Opened the file, made my edits.
Made links between the pdf's pages and from the pdf to external pdfs and videos etc. All of these links work in the pdf.
Burn the files to a disk
Some of the old links work
All the links within the main pdf work
None of the new links to external files work. I click the link and nothing happens. The paths are exactly the same as the previous version
I have tried:
Examining the links, everything is based on pseudo relative paths (last year it worked fine)
Burning the disk on a Mac and a Windows XP
Please help. Any and all help is very much apprecitated.

I figured it out.
I created the links in InDesign by making an interactive link to a file. When I open the file in Acrobat, the links work fine over the network. I burn to disk and the links no longer work.
Problem: At some point, InDesign changes the "open file" hyperlink command in InDesign into a URL webpage request in Acrobat.
Solution: So basically, I now have to go into the file in Acrobat and change all the buttons from "open web link" to "open file." It's only a product catalog with about 1,200 links that's due today.

After I burn my DVD Video comes up instead of Menu

After I burn my DVD Video comes up instead of Menu. How do I get rid of this?

Go into the Map mode of your iDVD project and make sure there is nothing listed in the Auto Play bin at the left.
If there is drag it out and try again.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Some of my Library Dissappeared after CD Burn

Hi,
I just noticed that part of my library has disappeared from iPhoto after I burned a disk to back them up.
The photos remain on my hard drive in the iPhoto Library>Originals directory, however they do not appear in the library when I load iPhoto. They are kept safe on the CD that I burnt.
I have burnt photos to disk before and this hasn't happened so I'm a bit worried (although all files are intact so its not too much of a problem). I'm just curious of whether I will need to create a whole new library (start iPhoto holding alt) or whether these files can be recovered somehow, by possibly forcing a whole library rebuild or something.
Any help would be great,
Andrew Chambers.

Andrew:
If you have to start from scratch here's a way to create a new library that contains the same rolls as the old one.
Creating a new library while preserving the rolls from the original.
Move the existing library folder to the desktop.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the desktop into the open iPhoto window.
This will create a new library with the same rolls as the original library. However dates on the rolls may be different but can be edited as you would the roll title.
If you have a lot of keywords assigned to the photos you can recover some of them if you follow Tutorial #1 before
In the future I suggest you make a backup copy of the Library6.iPhoto file after each import and after doing any editing or organizing in the library. Then if you experience a similar loss all you need to do is replace the damaged database file with the backup copy and you'll be back to the same place in the library as when you make the backup. See the tip at the end of my signature for a way to make it easy to accomplish the backup.
Once this is completed you can delete the Originals folder from the desktop and the iPhoto Llibrary folder. If desired, you can keep the older library folder to try other fixes on it.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
Once Disk Utility loads, do the following:
1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
2 - Click the 'First Aid' tab
3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
You should boot straight into the system partition when complete.
Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
Hope that helps.

Ipod Touch , Nike+ no longer available after neglect attitudes.

Can find the Nike+App no more.
After deferring the attitudes it was no longer available!
Can somebody say to where I can get the Nike+ App?
Thank in advance

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Mac OS no longer available after trying to remove Windows on Bootcamp. How can I restore Mac OS without the Mac HDD in options?

Mac OS no longer available after trying to remove Windows on Bootcamp. How can I restore Mac OS without the Mac HDD in options?
So what I did was, I had bought my iMac from a shop and asked them to do bootcamp for me. However, they installed 32 bit instead of 64. My fault, I did not make my self clear about it. So after it has been delivered to my house, I realized that I wanted the 64 bit. I tried to remove windows on bootcamp but honestly, I have not experienced this before. So I failed. I believe, I did something wrong.
So I opened the iMac and it keeps asking me to go to windows. Windows OS also corrupted.
I tried the Option Key but the only option is Windows 7 only. So using a different keyboard, I press option and it only shows Windows HDD and the Mac HDD has gone.
What am I going to do? How can I restore Mac OS without the HDD anymore?

iMac, Mac OS X (10.7.2) < your profile
Try using Lion Recovery

Wireless connectivity no longer available after TWC adds digital phone service

Hi All,
My problem is that my wireless Internet connectivity is no longer available after Time Warner Cable added digital phone service to my existing TV and broadband Internet service.
Prior to having the digital phone service added, my set up was a Motorola Surfboard cable modem connected to my Linksys WRT54G wireless router, with three computers (two Win XP desktops and one Win 7 laptop) wired to the Linksys router. I had wired Internet connectivity on all three computers. Importantly, I could also access the Internet wirelessly from the laptop instead of using a wire.
AFTER having the digital phone service added, my set up is the same except that now an Arris Touchstone Telephony Gateway (TG862G) has replaced the Motorola Surfboard cable modem. I still have wired Internet connectivity on all three computers. However, now I cannot access the Internet wirelessly from the laptop. This is a real problem in that often others in the house need access to the wireless network as well.
I should also mention that (from a wired connection) I cannot access the Linksys router any longer via 192.168.1.1. Now, the Linksys router seems to be "invisible," almost as though it were a pass-through device. I can access the Arris gateway at 192.168.0.1 (for what it's worth), but not the Linksys router.
Also, not sure this is important, but some time ago (when my wireless was working) I had configured the Linksys router so that it wouldn't broadcast the SSID. Through the Win 7 "Network and Sharing Center" I have tried to "manually connect" to my (hidden) wireless network. The message indicates that my hidden network already exists, but I still can't connect to it.
I've seen a few potential remedies involving power cycling the gateway and modem in certain sequences, setting the gateway's NAT mode to Bridged, etc., but nothing has worked so far. Time Warner Cable's only advice is for me to purchase (yet) another service so that the gateway can provide the wireless access, but I since my Linksys router worked before I'd rather stick with that method (and avoid yet another charge).
I would be very grateful for any help you could provide for this problem.
Thanks in advance.

1. Don't hide your SSIDs
http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssid-really-more-secure...
2. I assume the Arris is also a wireless router. Use inSSIDer to find the best non-overlapping, non-interfering wireless channels. Change the wireless channels on both the WRT54G and Arris if necessary.
http://www.metageek.net/products/inssider/

I downloaded acdsee camera flash (us$0.99) in Hong Kong's app store, but i cannot find it in the app store after i changed to another iphone. it seems that the app is no longer available in HK, how can I get back the app?

i downloaded acdsee camera flash (us$0.99) in Hong Kong's app store, but i cannot find it in the app store after i changed to another iphone. it seems that the app is no longer available in HK, how can I get back the app?

First make sure you are searching the name correctly.
If the app is no longer in the App Store it is no longer available for download. This happens when Apple has found the app violates the agreement with the developer or when the developer no longer wants the app listed in the App Store.
If the app is truly no longer in the App Store your only option is to copy it from iTunes on the computer you normall sync with.

Personal hotspot no longer available - after software upgrade to latest software

Hi All,
Hardware: 3GS Iphone
Software: Latest Iphone drivers
I had been experiencing problems with not being able to restore my iphone with existing software. I finally upgraded the software for a restore and after 3 attempts faile, on the fourth time it appeared to completed the process.
Now with the upgrade there was additional features installed, such as Icloud etc, but my main concern was that I am no longer able to access personal hot-spot!
It is actually no longer available in settings. Can you plesae confirm whether this has this been removed on new software?
Is there another option apart from having install my old software back to use this function which I rely on daily?
Please note that I do not have a previous backup on my old version to restore to previous version.
Appreciate any solutions anyone may offer!
Thanks!

It has not been removed. Who is your carrier? The carrier must support it and you must subscribe to a data plan that includes tethering. The only other way to get it to appear is on a jailbroken phone.

After I burn a dvd it won't play in other players?

After I burn a dvd on my Mac, why won't it play in other players?

first, you might have better luck in the correct forum. this is for Mac Pro's
here's the one you want
https://discussions.apple.com/community/notebooks/macbook_pro
Do you want to burn a data DVD or a Movie DVD? If it's the 2nd one, then get iDVD or another movie dvd making application. Most computers don't have that capability
"naturally", you have to go out and get something that'll let you do that
JB

After cd burn, burn no longer available

Similar Messages

Maybe you are looking for