After change license-key.xml I got an HTTP error 404

Hello,
after i changed the license-key.xml i get now a HTTP error 404 if I connet to the webfrontend. Do anybody know what i can do?

Originally Posted by linux30
Hello,
after i changed the license-key.xml i get now a HTTP error 404 if I connet to the webfrontend. Do anybody know what i can do?
Check catalina.out. 404 error tells you that Teaming is not working. Teaming did not start correctly after you licence change. Check permissions on the licence which is a common mistake.

Similar Messages

Change License Key from TechNet to Retail

I used my TechNet key to prove if 2012 would work for an NFS backup target. I don't believe I've even activated it yet. It seems to work fine, and now I plan to approach the customer to buy a license for 2012 Standard (2VM license). Can
I change the key to the retail version without starting over?
Thanks!

Adam: Thanks. I've never had the need to do this before on a server.
Tim: We can't sell a customer something we have no idea will work, we won't know if it will work for his purposes unless we try it, and no IT company will duplicate a customer's environment just to see if it will work for them. Normally we would
know if it would work, but this was out of the ordinary. We just need a couple of NFS targets for other servers to back up to. They have 2003 and 2008 R2, but they have problems with large files. Even after two years of us running into it
and learning that "Microsoft is aware", 2003 and 2008 are not fixed. Our initial thought was to just add a couple more UNIX VMs instead of using Windows. While ZFS has compression, it also has many other capabilities that we don't need, and requires
more server resources as a result. NTFS is simpler, more efficient for this application, and we thought that 2012 almost certainly would not have the problem since large VM files are common today. The price makes sense since the license allows
2 VMs, which is what got me to entertain 2012. As we were hopeful, it does not have the issues 2003 - 2008 R2 have, and worked perfectly during the test. As a result, I will try what Adam wrote and see if it will work. If it does, it will
save me 2 or 3 hours by not having to recreate it. Also, customers don't insist about things they don't understand, and have no desire to learn. We're the ones who insist on the licensing. The only things they care about are, how will it
help me, what will it cost, and how well did it work.
Thanks all!

"Your license key is invalid or has expired" error (Purchased License)

Hello -
We have just installed CR Server XI R2 and have purchased a valid license. The installation accepted the license key during the install and also allowed me to register this license key at the end of the install and sent me my registration number. After finish the install and following the installation guides - all of the services come up in Central Configuration Manager - but when clicking the Enable/Disable Servers icon and trying to enable 1 or all of the servers there (final step in the install guide) I get the following:
Your license key is invalid or has expired. If you received a temporary license key by purchasin another BusinessObjects product, you must register BusinessObjectsEnterprise to receive your permanent license key.
Again, this is not a temp license, but a full Crystal Reports Server XI R2 5 Cal keycode, purchased through CDW.
When we were awaiting the full license to come, we attempted to install and run the trial version of CR Server XI R2 and continually received this same error with that install. I have removed the package completely and re-installed multiple times but each time get this same error at the final step.
Any help would be great, we've tried reaching out to the Customer Email Support for BO and phone number since Monday and finally yesterday we were told we had to come to this forum to get assistance.
Thanks in advance.

Hello Jeremy,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Entering multiple entries in ZTABLE after changing a key field to nokey.

HI Experts,
This is Hema Iam new To ABAP.
My senario is I have created a ZTABLE with companycode, GLAccount, costcenter,profitcenter,plant.
AT first my table has companycode and GLaccount has key fields..
But to enter the multiple entries for cocode and GLaccount (ZBUKRS and ZHKONT) i have changed GLaccount has non key fields and table maintainence regenarated for the same.
my issue is as there are repeating entries for cocode and glaccount it is not possible to enter the entries as it is saying the entry is repeated and asking me to skip because cocode is primarykey there...
how can i overcome thsi issue to enter multipel entries for cocode and GLaccount.
As it should be done quickly ur help would be usefull
Thanks In Advance
L.Hemalatha.

Hi
I created zslno field and made it has primary key field aslo but still iam getting eror message while entrying entries as
"an entry already exists with the same key"
wht should be done i maintainance recreated after adding this field nad in se14 i adjusted the table too still what steps should be done ?
eg i need to enter data:
client cocode zslno GLacount Cost center profit center plant
010 1000 1483100 1001199 0035
010 1000 226100 101199 0076
so while entering second record and trying to save iam getting that error.... help me out

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Change licence key

where can I change the licence key on the server kit?
thanks

Hi all
I have tested the following on the server and client:
- change license key in CMC > it gives an error message "License Key Error: Invalid Key .." even when using the latest license key provided on the SAP Support Portal
- go to Add/Remove Programs, select SAP Integration Kit, select Upgrade, enter latest license key and go next (you do not need to select any components to install unless you need to), it will stop and restart the SIA and all server services > it works
- if Crystal Reports is installed go to Programs, Crystal Reports 2008, License Manager, in the Product dropdown list select BO Integration Kit for SAP > this works too
Note: I have noticed you also need the SAP integration kit when you build webi reports over OLAP universes to access BW data so I gather that the SAP Integration Kit app needs to be installed on the server too
Regards,
Lenny

Unable to Use License Key

Hi
I downloaded Sneak Preview SAP NetWeaver 04s - Full ABAP Edition with Web Dynpro for ABAP.
I am able to set up the same and i am able to logon to the NSP system.
But when i am trying to use my license key which i got from SDN it is saying the invalid license key. I tried with replaceing ZERO with "O" still it is showing the same. Could any body help me in this regard
The follwing message i got from the SDN
Dear Mr BOGA UMASHANKAR, thank you for your interest in SAP solutions.
You requested an evaluation license for the following system: SAP System
ID: NSP;
Operating System: Windows
SAP Release: 6.40;
Database: MaxDB
You have already registered with the evaluation and your license key is still valid. If you want to change your registration data, please reply to this email and specify your needs. In case that you have lost your license key, here is your current evaluation data:
Your Hardware key      : P0794904372
Your License Key       : OMN2Z5913D2JA8F48KXBP84G License Expiration date: 20060523 SID                    : NSP
Installation-Nr.       : DEMOSYSTEM
Some useful hints: - The license key depends on your hardware. If you have changed the hardware setup or if you want to install the demo on another hardware, you have to request a new license using the new hardware key. - You can obtain your current hardware key and change/update your license without reinstalling the demo at any time. To do that, use the "saplicense" executeable located in C:\BSP with the -get and -install switches - If your license will not work, check that the characters match in case and make sure you differ between zero and the letter "O". Have fun!

to install the license key you should have logged on the windows system with user id nspadm.
Regards
Raja
please close your previous thread
Problem after installing SAPNW2004sSneakPreviewABAP

LR ask for License Key

I bought Adobe CC: PS and LR. I installed PS and LR as trial version. After buying the Cloud, PS worked without trial mode, but LR still wants to have a license key, but I got no key. Neither in the mail nor online in my Adobe account. How can I use LR?
PS: How to contact Adobe via mail? Haven`t found a way to contact them online (that’s crazy)
thx

Try uninstalling Lightroom (you can keep all your settings when you do this - it's an option in the uninstall routine) and then re-installing it using the Adobe Creative Cloud Application, you should find it under Apps. Do a re-boot after uninstalling to make sure the CC app recognises Lightroom is missing.

License Key installation - Error from database layer

when i am trying to install license key i am getting the following error message
<b>"Error from database layer"</b>
following are the values passed.
SAP system = NSP
Inst. Number = DEMOSYSTEM
Hardware Kye = XXXXXX
System Number = left balnk
Expires on = Expiry date received in themail
Key = key received in the mail
Help please
Regards
Raja

I have the same problems... And I tried hard to follow your explanations but I did not manage to get it all sorted... Especially the hint "finally resolved it..." ..."because some tables where missing" didn't help me too much...
Can you help please?
The problem:
I would like to write some programs but I get the error I need a developer id. Therefore I read all the topics about getting a license and the developer key and got the email containing the following:
"Your Hardware key      : P1297367619
Your License Key       : TZRNG1J1FOLSOZEZTZ8J8TOP
License Expiration date: 20060102
SID                    : NSP
Installation-Nr.       : DEMOSYSTEM"
I set it all in the SLICENSE and I got the following error:
"Error from database layer"
With some retries I got also the error
"Invalid license key"
I am stuck. What do I need to check, do ?
I am a SAP newbie so please give me directions...
cheers
stefan

Need to download license key,Authorization error!

Hi,
Background: We had taken 1 year Netweaver subscription which expired in november and later on, we renewed it for next year.
Problem: We have to download the license key form SAP market place. But after login, when I click on "Request permanent license key" link, it shows me 'Authorization Error!
Currently you do not have authorization to use this function. To request the authorization, please contact one of the administrators at your company'
Can any body tell me what would be problem? Or what to do next?
Let me know if you need any other details on this.
Thanks and Regards,
Chandan Mahajan

Hi Chandan Mahajan,
Even though you have valid OSS ID, access in SMP, You need need necessary Authorizaiton to request License keys not all users by default can request it.
Gain the required authorizations and then request license keys.
To know who can give acess:
Goto -> SMP -> MyProfile -> Display my Super-administrators -> One of those admin should be able to grant the required acess.
Regards,
-Raj K

ABAP Trial no email with license key

I succesfully installed the ABAP Trial and followed the instructions to order a proper 90 day evaluation license key but still got no email...
how long does this take? meanwhile i can evaluate with my temporary license...

Hi Michael,
I also requested a new license key via this site and waited several days for an answer.
Then I tried it on this page:
https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm
and received an email with a new license key 15 minutes later.
Kind regards,
Peter

New License Key for SAP NetWeaver 2004S (SID = NSP) is wrong!

Hello,
serval times i tried to get a new license key from the sap-site "https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm", but every key i got was wrong.
My System-ID is NSP and my Software product/release is SAP NETWEAVER 04. The Database is             MaxDB (former SAPDB).
What should i do to get the right key?
Heiko Heinrich

Hi
Log on to OSS with ur SUSER and Password
then go to
Keys & Request tad
then select
Request new license key
then
select ur proper installation no
Then select new system Button
and fill all detail of ur system from OS to DB release
System ID *
System number
System name
System type *
Product *
Product version *
Technical usage
Database *
Operating system *
Planned productive date
and SAP will sent u license text file
hope that will u help out

Encrypt license key

Hey, I need to encrypt a software license key and I got no time to study all those options. Can someone tell me a shortcut? Thanks.

It would depend on your choice of implementation. If you have a server that the (client) software can connect to, you can use public-private key cryptography. In fact, the key can be your license if you want. Generate a serial number for the client and add a timestampt to it. Generate a new public-private keypair. Keep the private key and a hash of the serial number on your server. Bundle the serial number and public key with the software. (Note, unless you have downloadable software of an online activation process, it will be trivial for someone to simply use a playback attack on your registration process). When a user wants to register, they send their public key and the encrypted serial number. The server decrypts the serial number and compares it with the hash stored on the server.
There are a number of problems with this methodology, especially insofar as you can never secure client software. But then again, you might only want to stop 95% of so of your users.
- Saish

License Key For SAP R/3 Enterprise Demo Version

Hello Basis Gurus,
I have installed SAP R/3 Enterprise Demo Version in my Notebook.
When i am trying to login using User ID: SAPUSER getting an error message that ":Logon refused (valid license not installed)"
SAP R/3 Details:
Component Version: SAP R/3 Enterprise
Installation Number: INITIAL
License expiration: ..----
Active Hardware Key: C1129820057
System Number: System No. Empty
When i am trying to install the License Key at Command Prompt getting the error message that
Specify your license key:
LICENSE_KEY   1...5....0....5....0...4
LICENSE_KEY =
Wrong license data specified
>        Check the specified license data for:
>        - typing errors
>        - upper / lower characters
>        - same values as noted on license fax
How can i get the correct LICENSE_KEY for this demo version for the above hard ware key.
Please advice urgently..

to get hardware key:
saplicense -get
to get license key:
https://websmp106.sap-ag.de/licensekeys

No Mail with license key

hi,
I tried to get yesterday a license key for a test Installation -> http://www.sap.com/platform/netweaver/minisap.epx and I don't get the Key.
Is there a reaseon?
Dieter

Hello All,
Just in case anyone has this problem yet, please check the following thread.
New license MiniSAP & Netweaver 2004s
Best Regards,
Dabre

After change license-key.xml I got an HTTP error 404

Similar Messages

Maybe you are looking for