After change my housing, the signal is too bad! Help please.. i cand stand it!
Hi, i recently changed my 8320's housing, and then the signal is too poor.. i gets lost anywhere.. anytime..
how can i fix it.. im very disappointed.. HELP me please!! cause i really like this phone..
Saulo Lozano
Hey there I too had the same problem but with my tour 9630 (i believe is the number) so i re-looked at my old housing and found that I had left some stickers on it, one sticker was under the flash and speakerphone and the other was by the sim card holder and wrapped around to the back I can't tell you which one exactly is what did the trick because I removed both and put them on my new housing and voila! full reception again!!! (knock on wood) That will also help keep your battery life because your phone wont constantly be looking for service.
to take off the stickers just heat them up on low with a hair dryer and then get a very small/thin flat head screw driver or something of the same size and gently try and coax the thing off take your time no need to rush if it feels really stuck heat again on low though so you don't hurt the sticker msg me if you need help I hope this solves your problem
Similar Messages
-
After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
Can't record from Line-In because the signal is too strong
This is happening with a just bought h9-1150 desktop system.
Intel Core i5-3550 CPU
IDT High Def audio codec
NVIDIA High Def Audio
I've been trying to record from a turntable into Line-In. No matter how low I set the recording levels, the signal is too hot, resulting in overdriven, distorted audio.
Doesn't seem to matter whether Beats is turned on or off.
Any help would be appreciated.You will need to attenuate the signal or you will damage the audio input of your motherboard. You can either find a circuit online to make a converter or buy one. Here is a web document with more information on the subject.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
I keep trying to reset an icloud account that is disabled because I forgot the password but is not able too. I tried changing it but there seem to be some mix up in the icloud ID and the gmail email address. HELP PLEASE!!
Your password was sent to your emergency email address. Perhaps you have an email you never use? I use the free email from my cable TV account as my emergency email.
Your Apple account and cloud account are separate. You could even have completely different user and password. Most of us use the same user ID and password, but they are not the same thing, don't mix them up.
If you can't retrieve emergency email, you will have to call apple support.
http://support.apple.com/kb/HE57 -
Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks
“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony -
HELP is there anyway i can find and remove the flashback virus because i find the manual instructions too complicated HELP!!!! common the manual instructions are far too complicated for the average user. I just downloaded the SOPHOS anti-virus will that find and remove it
How deal with FLASHBACK trojan?
-
I have two macbooks, one is my old one which my wife uses and my macbook pro. When either of us make changes in Safari it changes it on the other's computer...please help.
You're both synchronizing Safari with iCloud while signed in with the same Apple ID. On one computer, sign out of iCloud in its preference pane and sign in with a different ID.
-
I have the new iOS 6 on my iPad, and when ever I try to log on to the iTunes store this comes up: Cannot connect to the iTunes store. Anybody help please?
I'm also having this problem I've already tried changing the year stuff and its still the same I succeeded once when I toggled my credit card account but after that the same problem occurred.
-
I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!
Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.
-
iPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use... -
Getting error message2324 when downloading the new update for itunes help please
getting error message 2324 when downloading the latest update of itunes help please.
Will not let me uninstall itunes from my computer, gives me the message that I don't have access need administrator. ( I am the only user of this computer)
Thank you
ChrisGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
I dropped my phone down the toilet then turned it off and left it in rice over night now it's saying battery dead and needs to be charged but I've read charing it is the worst thing to do, help please?
After taking a dip in my vest pocket in the washing machine for about 10 minutes, my nearly new 5S spent 5 days in rice and silica gel packets. It definitely dried out, but there is damage to either the battery or the circuit board because it turns on, and I continuously get a blue screen and it reboots every five minutes for a half hour, and then miraculously, it stays on and works perfectly. But I wound up having to fork over $700 for a new 6+. because I couldn't stand the rebooting any longer. I had no insurance, but I do now, Apple insurance, not carrier ins.
-
I cannot open my Safari. I double click and still loading forever an ever. I cannot get to any preferences at the configurations bar. Any help please?What should a i do to fixe that?
I saw on another post you have asked about this dates LINC DAVIS:
Date/Time: 2014-07-01 19:03:59 -0300
OS Version: 10.7.5 (Build 11G63)
Architecture: x86_64
Report Version: 9
Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Version: 6.1.5 (7537.77.4)
Build Version: 1
Project Name: WebBrowser
Source Version: 7537077004000000
Parent: launchd [203]
PID: 624
Event: hang
Duration: 1.46s
Steps: 15 (100ms sampling interval)
Pageins: 7
Pageouts: 0
Process: Safari [624]
Path: /Applications/Safari.app/Contents/MacOS/Safari
Architecture: x86_64
UID: 501
Thread 0x1597a DispatchQueue 1
User stack:
15 ??? (in Safari) [0x10557ff2c]
15 SafariMain + 266 (in Safari) [0x10577947c]
15 NSApplicationMain + 867 (in AppKit) [0x7fff8b559eac]
15 -[NSApplication run] + 470 (in AppKit) [0x7fff8b2dd9b9]
15 -[BrowserApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 161 (in Safari) [0x1055e44d5]
15 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135 (in AppKit) [0x7fff8b2e107d]
15 _DPSNextEvent + 1247 (in AppKit) [0x7fff8b2e19c5]
15 AEProcessAppleEvent + 102 (in HIToolbox) [0x7fff82c85b69]
15 aeProcessAppleEvent + 250 (in AE) [0x7fff832b89f7]
15 _ZL25dispatchEventAndSendReplyPK6AEDescPS_ + 38 (in AE) [0x7fff832b8b03]
15 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 200 (in AE) [0x7fff832b8c25]
15 _NSAppleEventManagerGenericHandler + 105 (in Foundation) [0x7fff896ed5dc]
15 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 283 (in Foundation) [0x7fff896ed74e]
15 __-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_1 + 101 (in Foundation) [0x7fff896ee7c7]
15 -[NSObject performSelector:withObject:withObject:] + 65 (in CoreFoundation) [0x7fff81947541]
15 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 330 (in AppKit) [0x7fff8b2e45b9]
15 -[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:] + 227 (in AppKit) [0x7fff8b2e4849]
15 -[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:registeringAsReady:completion Handler:] + 193 (in AppKit) [0x7fff8b2e49f9]
15 _NSPersistentUIFinishAcquiringTalagentWindows + 93 (in AppKit) [0x7fff8b3108cb]
15 copyTalagentWindowsAcquisitionBlock + 79 (in AppKit) [0x7fff8b310947]
15 +[NSBundle mainBundle] + 55 (in Foundation) [0x7fff896e1bb9]
15 -[NSRecursiveLock lock] + 25 (in Foundation) [0x7fff896badf9]
15 __psynch_mutexwait + 10 (in libsystem_kernel.dylib) [0x7fff87733bf2]
Kernel stack:
15 psynch_mtxcontinue + 0 (in mach_kernel) [0xffffff800059eb20]
Thread 0x1599d DispatchQueue 2
User stack:
15 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8ae7e316]
15 kevent + 10 (in libsystem_kernel.dylib) [0x7fff877347e6]
Kernel stack:
15 kqueue_scan + 416 (in mach_kernel) [0xffffff800053b4d0]
Thread 0x159a4
User stack:
15 thread_start + 13 (in libsystem_c.dylib) [0x7fff8d3eeb75]
15 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8d3eb8bf]
15 _ZN3WTFL19wtfThreadEntryPointEPv + 15 (in JavaScriptCore) [0x105e2da3f]
15 WebCore::IconDatabase::iconDatabaseSyncThread() + 303 (in WebCore) [0x106958faf]
15 WebCore::IconDatabase::syncThreadMainLoop() + 491 (in WebCore) [0x10695c39b]
15 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff87733bca]
Kernel stack:
15 psynch_cvcontinue + 0 (in mach_kernel) [0xffffff800059e920]
Thread 0x159a9
User stack:
15 thread_start + 13 (in libsystem_c.dylib) [0x7fff8d3eeb75]
15 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8d3eb8bf]
15 thread_fun + 24 (in QuartzCore) [0x7fff81e65d35]
15 CA::Render::Server::server_thread(void*) + 184 (in QuartzCore) [0x7fff81e65df5]
15 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8773267a]
Kernel stack:
15 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff8000215930]
Thread 0x159b2
User stack:
15 thread_start + 13 (in libsystem_c.dylib) [0x7fff8d3eeb75]
15 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8d3eb8bf]
15 __NSThread__main__ + 1575 (in Foundation) [0x7fff8970f6a2]
15 -[NSThread main] + 68 (in Foundation) [0x7fff8970f72a]
15 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 335 (in Foundation) [0x7fff8971afd7]
15 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff818e9486]
15 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff818e9c74]
15 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff818e150c]
15 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8773267a]
Kernel stack:
15 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff8000215930]
Thread 0x159b7
User stack:
15 thread_start + 13 (in libsystem_c.dylib) [0x7fff8d3eeb75]
15 ??? (in Safari) [0xdeadbeef]
15 dlopen + 540 (in dyld) [0x7fff65188657]
15 dyld::runInitializers(ImageLoader*) + 97 (in dyld) [0x7fff651821b9]
15 ImageLoader::runInitializers(ImageLoader::LinkContext const&, ImageLoader::InitializerTimingList&) + 59 (in dyld) [0x7fff6518d0b7]
15 ImageLoader::recursiveInitialization(ImageLoader::LinkContext const&, unsigned int, ImageLoader::InitializerTimingList&) + 237 (in dyld) [0x7fff6518c2cd]
15 _ZN4dyldL12notifySingleE17dyld_image_statesPK11ImageLoader + 226 (in dyld) [0x7fff65180973]
15 load_images + 233 (in libobjc.A.dylib) [0x7fff8897636b]
15 call_load_methods + 161 (in libobjc.A.dylib) [0x7fff889766ca]
15 +[VSearchLib load] + 92 (in libVSearchLoader.dylib) [0x109b72bf4]
15 -[NSBundle principalClass] + 41 (in Foundation) [0x7fff8970ed84]
15 -[NSBundle load] + 18 (in Foundation) [0x7fff897173f8]
15 objc_msgSend_vtable3 + 24 (in libobjc.A.dylib) [0x7fff889780d8]
Kernel stack:
15 hndl_alltraps + 225 (in mach_kernel) [0xffffff80002da481]
15 user_trap + 711 (in mach_kernel) [0xffffff80002c4017]
15 exception_triage + 149 (in mach_kernel) [0xffffff8000220e15]
15 exception_deliver + 766 (in mach_kernel) [0xffffff8000220c1e]
15 exception_raise_state_identity + 325 (in mach_kernel) [0xffffff8000249c75]
15 mach_msg_rpc_from_kernel_body + 277 (in mach_kernel) [0xffffff80002239d5]
15 ipc_mqueue_receive + 70 (in mach_kernel) [0xffffff8000215886]
15 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f42b]
15 thread_continue + 1661 (in mach_kernel) [0xffffff800022f1ad]
15 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c2939]
Binary Images:
0x10557f000 - 0x10557ffff com.apple.Safari 6.1.5 (7537.77.4) <1144E535-39EB-3DD2-8326-F931E2CEDFC5> /Applications/Safari.app/Contents/MacOS/Safari
0x105589000 - 0x105ac2fff com.apple.Safari.framework 7537 (7537.77.4) <079F7B57-311E-3A81-B3ED-B7AC3F78E262> /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
0x105e24000 - 0x1061cbff7 com.apple.JavaScriptCore 7537 (7537.77.1) <C0C6D15C-8C26-3FD8-BE2E-7A1C20B46359> /System/Library/StagedFrameworks/Safari/JavaScriptCore.framework/JavaScriptCore
0x106953000 - 0x107a00ff7 com.apple.WebCore 7537 (7537.77.4) <E0176EFF-835E-3B32-909D-E3A426947476> /System/Library/StagedFrameworks/Safari/WebCore.framework/WebCore
0x109b72000 - 0x109b73fff libVSearchLoader.dylib ??? (???) <2DF78468-AB4B-363E-A838-D4CE14679E8B> /System/Library/Frameworks/VSearch.framework/Versions/A/Libraries/libVSearchLoa der.dylib
0x7fff6517f000 - 0x7fff651b3baf dyld ??? (???) <C58DAD8A-4B00-3676-8637-93D6FDE73147> /usr/lib/dyld
0x7fff818b1000 - 0x7fff81a85ff7 com.apple.CoreFoundation 6.7.2 (635.21) <62A3402E-A4E7-391F-AD20-1EF20236CE1B> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff81e63000 - 0x7fff82003ff7 com.apple.QuartzCore 1.7 (270.5) <19E5E0AB-DAA9-3F97-988C-D9A46AFB9C04> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x7fff82c75000 - 0x7fff82fa1fff com.apple.HIToolbox 1.9 (???) <CCB32DEA-D0CA-35D1-8019-E599C8007AB6> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x7fff832b5000 - 0x7fff832f4fff com.apple.AE 527.7 (527.7) <B82F7ABC-AC8B-3507-B029-969DD5CA813D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff8771d000 - 0x7fff8773dfff libsystem_kernel.dylib ??? (???) <66C9F9BD-C7B3-30D4-B1A0-03C8A6392351> /usr/lib/system/libsystem_kernel.dylib
0x7fff8896d000 - 0x7fff88a51e5f libobjc.A.dylib ??? (???) <871E688B-CF57-3BC7-80D6-F6476DFF109B> /usr/lib/libobjc.A.dylib
0x7fff896b5000 - 0x7fff899cefff com.apple.Foundation 6.7.2 (833.25) <22AAC369-B63C-3C55-8AC6-C3ECBA44DA7B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff8ae7c000 - 0x7fff8ae8afff libdispatch.dylib ??? (???) <8E03C652-922A-3399-93DE-9EA0CBFA0039> /usr/lib/system/libdispatch.dylib
0x7fff8b2d9000 - 0x7fff8bedffff com.apple.AppKit 6.7.5 (1138.51) <44417D02-6123-3FC3-A119-CE51BB4C3006> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x7fff8d39d000 - 0x7fff8d47afef libsystem_c.dylib ??? (???) <41B43515-2806-3FBC-ACF1-A16F35B7E290> /usr/lib/system/libsystem_c.dylib -
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
Maybe you are looking for
-
Hi Experts, We are working on CRM 2007 as frontend and ISU as backend. When we Generate an interaction record in the Interaction Center, there is an option of viewing Notes History of any BP. The notes are viewed in a textarea which is declared in th
-
Apple TV 6.2 not connecting with home sharing to iTunes 11.3
I have looked for any solutions to help reconnect the two for home sharing. When I click on "Computers" on the ATV, it says its loading my library. After "loading" it gives me the "Could not connect" error. My MBP and ATV are both connected to the sa
-
Impossible to start mail (V 4.5) on Mac OSX (V 10.6.8) what do i have to do?
Impossible to start mail (V4.5) after sytem update Mac OSX (V10.6.8). What do i have to do?
-
WMS related background running job reports
Hi All, Anyone could help to list all the WMS/Shipping/TMS related background jobs' reports? such as: 1. create the TO -> RLAUTA10; Thank you very much,
-
Embedding videos on a forum for discussion
I would just like to know if I can embed a video on a forum (not a link to the video) with flash player. If so how do I do it?