After changing batteries and up date my I Mac to 10.8.2, my BLUETOOTH disappear from my computer. On the top line right corner the symbol says: NOT AVAILLABLE, and the icon is not anymore int my computer's preference. Anyone can help me here?
After changing batteries and up date my I Mac to 10.8.2, my BLUETOOTH disappear from my computer. On the top line right corner the symbol says: NOT AVAILLABLE, and the icon is not anymore int my computer's preference. Anyone can help me here?
I've done it two or three time and I still have the same problem. May be I do not do it properly so can you give me the right procedure.
Similar Messages
-
I'm not sure if anyone had run into this issue. Clicking the same place on the display sevral times will cause the click to stop working. For example, if i open safari and click on the Show Reading List button, it will work the first time i click it, but stop responding to my command as i click more, as if the button is not there, i have to move away the cursor and click somewhere else and move back to click the button to make it work again. And it happened everywhere, not just the show reading list button. The scrolling and moving are normal.
In fact, I have my trackpad replaced in an apple store for this issue but it turned out this is not a hardware problem, and it is not only my problem. Ironically, i found the same issue on several of the demo Macs inside the apple store. So anyone can help me here? Thanks.Hi manni394, what version of Firefox are you running now?
Firefox 22 has a new way of setting the default zoom level: it is based on your Windows font size setting. So, if you set Windows fonts to 125% (enlarged 25%), your Firefox pages also will be enlarged 25%. On pages that do not adjust their layout, you may get a horizontal scroll bar.
To reduce the zoom on a page, hold Ctrl and tap the - key (the one on the numeric keypad or the one on the number row of the keyboard). The zoom should be reduced for each tap.
If you want to globally adjust your zoom level to be lower, you can use either of these add-ons:
* [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
* [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint]
If you already have one of those add-ons, check the default/global zoom level in case it needs to be adjusted. -
anyone can help me...my iphone 4s is not charging and the charging icon remain 1%...and there is a time it will come on and i will try to reset the settings but the problem it doesn't turn on once it dead.And i went to the apple store today and they said the charger connector or the charging port has been bent..they want me to pay 199 plus tax for another phone.Since i have this iphone 4s for 1 year and 2 months so it is very frustrating for me...So i decided not to buy another iphone..If i want to get another one not with apple anymore.So,when i got home,my wife try to make a research on the computer try to troubleshoot on our own because i cannot believe what the Apple manager told us "THE CHARGING COONECTOR HAS BEEN DAMAGED MAYBE BECAUSE i FORCED TO CHARGE EVEN IT DOESN'T FIT" it is a big insult for me because this is not my first phone..So my wife word hard for it and she keep on pressing the power button every 15 minutes..(10-15 seconds and it come on).And again i try to reset again its dead..I cannot turn back on....any advise?looks like apple wants only money and they are not trying there best to help there customer problem.
My question is if the port is damaged,How come the charge sign come ff when i charge...but if there is a chance that the apple logo come on the icon of the battery never change still 1% but it will last for a day..doing phone calls and everything?Please help!
-
After updating to ISO6, my email sending get extremely slow or dispeard. on the botton line of mail page always indicate "sending # of 9", however I do not know where to check or delete these unsent items. Please help! It has consumed lots of data.
I use @me.com and @hotmail.comHi,
>>A CHAR datatype and VARCHAR2 datatype are stored identically (eg: the word 'WORD' stored in a CHAR(4) and a varchar2(4) consume exactly the same amount of space on disk, both have leading byte counts).
Ok, but on the other hands:
SGMS@ORACLE10> create table x (name char(10), name2 varchar2(10));
Table created.
SGMS@ORACLE10> insert into x values ('hello','hello');
1 row created.
SGMS@ORACLE10> commit;
Commit complete.
SGMS@ORACLE10> select vsize(name),vsize(name2) from x;
VSIZE(NAME) VSIZE(NAME2)
10 5
SGMS@ORACLE10> select dump(name),dump(name2) from x;
DUMP(NAME) DUMP(NAME2)
Typ=96 Len=10: 104,101,108,108,111,32,32,32,32,32 Typ=1 Len=5: 104,101,108,108,111Cheers -
Apple wireless mouse does not reconnect after changing batteries
The wireless mouse on my iMac quit working after I changed batteries. There was no response to mouse clicks, or movement, or scrolling. Eventually I connected a USB mouse, did an orderly shutdown of the system, rebooted, and the mouse started working again.
The long story ...
The first time I encountered this problem was the first time I changed batteries in the Apple Wireless Mouse that came with the iMac 3.06 GHz Intel Core 2 Duo I purchased in January 2010. (The OS is 10.6.2 without updates.) I switched the mouse on, the green light on the bottom of the mouse blinked for awhile (at least a minute), but clicking or moving the mouse got no response. The new batteries were Eneloop 1.2v rechargeables. I tried clicking and moving the mouse several times over a period of ten or fifteen minutes, nothing.
I started searching the web for clues about what to do and maybe a half hour or so later I tried the mouse again and it worked.
A few days later I wanted to see if the problem was reproducible. I don’t remember now whether I removed the batteries and reinserted them or just power cycled the mouse, but again the mouse quit working. The green light would blink for awhile, about a minute, then would go off completely. I took this to mean the mouse was searching for the Bluetooth network, not finding it, and giving up. Over the period of half an hour or more I tried switching the mouse off and back on several times. The green light would blink, but nothing more.
I started searching for tips about reconnecting an Apple wireless mouse after changing batteries. I ran across a (2005) discussion on MacRumors forums titled “Wireless mouse troubleshooting problem...” The symptom was a little different, the mouse was partially functional. In this discussion some contributors thought weak batteries could be to blame. So I replaced the rechargeable batteries with new alkaline batteries. Still no go.
I attached a USB mouse and looked at the Bluetooth preferences pane. I was surprised to see the Apple Wireless Mouse was listed there with status paired and connected. Still at this point switching the mouse off and on would produce blinking light on the mouse, but no functionality.
I tried various things in the Bluetooth preferences to see if I could get the mouse connection to restart. When I tried to delete the mouse connection there was an alert saying this was the only mouse connected, was I sure I wanted to disconnect. I said yes, but nothing changed in the Bluetooth preferences pane. I tried unchecking the Bluetooth “On” box, etc. Eventually I only succeeded in losing response to the keyboard as well.
I attached a USB keyboard, shutdown the system, and rebooted. I didn’t know if having the USB keyboard and mouse plugged in would interfere with the wireless devices, but it did not. After the reboot both the wireless keyboard and the mouse were functional again.
Since then I have tried removing the batteries briefly a couple of more times to see if the problem would recur. I actually put the rechargeable batteries back in. Both times the connection was remade as soon as I clicked the mouse. I also now have seen the Apple support article about setting favorite Bluetooth devices http://support.apple.com/kb/TA21371 . I'll try that if this issue comes up again.Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L -
after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?
I am also on my forth hard drive on the same model.
When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct. -
I am not able to scroll my contacts. If i add or mahe any change in existing contacts, it appaers at the top of the contacts and freezes rest above the first letter of newly added or changed one. Anyone can help?
Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.
Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.
-
my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u
Option 1
Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad -
My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..
I also cannot update ios..how to solve this problem..?Your going to have to perform a restore.
-
hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?
You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808 -
It's not sync-ing. It says "sync will resume when (my computer's name) is available. My computer is on and Itunes are open. Anyone can help?
Hi Lauren ...
Try the troubleshooting steps here > iOS: Device not recognized in iTunes for Windows -
Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?
It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.
-
I can't sync my voice notes from iphone to desktop after June 2011, anyone can help?
After June 2011, I am not able to sync my voice notes from my iPhone to my laptop computer (window vista). In the past no problem with it. Anyone can help me to overcome the problem.
Welcome to the Apple Support Communities
If you use iCloud, on your Mac, go to System Preferences > iCloud and turn on Calendars, and on your iPad and iPhone, open Settings > iCloud and turn on Calendars -
While trying to import photos from my Canon 5D markIII, iPhoto displays an error message which says unreadable format and the following files could not be imported. Please advise???
the screen shot does not display (a Forum bug ) and if it did it does not answer the questions
Seriously we can not see you and if you refuse to answer simple questions we can not help
Need information to help
what version of iPhoto? Is OS X 10.8 as you state correct for the OS? Has it ever worked? What has changed since it worked? Will Image Capture ( in your applications folder) import the photos? How are you importing - USB to the camera? USB card reader? built in card reader?
Any other clues that would help a total stranger who can not see you or your computer assist you?
LN
Maybe you are looking for
-
Bootcamp 2.1 won't install on Windows 7 64bit
I downloaded the 64bit Bootcamp and tried to install on Windows 7 64bit Retail Edition (RTM) and Bootcamp won't run. I tried compatability mode for Windows Vista 64 bit with and without SP2. I need sound drivers. Everything else works on my Mac. HELP
-
How to clear the Residual & partial payment through app
Hi Experts, How to clear the Residual and partial payment through app in accounts payable i tried but i am not getting the out put so plz clarify the my question and any other configuration for that give answer with example... Thanks for advance Rega
-
Can i backtime a clip into a template drop zone?
trying to use a transition template but when i drop the clip into the outgoing clip's drop zone well it goes in from an in point which makes aligning the transition with it's ingoing and outgoing clips a major pain in the ***. Ideally I'd like to jus
-
Can't save for web in CS5--and yes, I've checked the forums!
Hi all, I just ordered CS5 through my company (which takes 2 weeks) and installed the trial in the meantime. I am getting an error when I try to save for web: The operation could not be completed. A write permissions error has occurred. Then, when I
-
Individual/Collective Requirements MRP4 View
I have a situation where my top level material (FERT) is a MTS item (reorder point planning). In the BOM is an intermediate (HALB). Due to the nature of my process I must have a 1:1 relation ship of the HALB to the FERT. However: as many have poin