After changing from my 3S to a 5, I use much more data than before why?

My Iphone5 uses an accessive amount of data, a lot more than my 3S and I am on the internet the same amount to time.. any clues of why?

Your 5 has more than your 3S.
BTW, Nobody here can know how your iPhone is configured, so you need to supply more info for a better answer.
Read here:
http://support.apple.com/kb/HT4146

Similar Messages

  • After changing from IE to Firerfox mozilla, the fonts on email are too small and I can't change them

    After changing from Internet Explorer to Firefox Mozilla, I noticed the font size, like this one, was the standard font in everything. I want a larger font in '''everything''' I read and type, including emails.

    My two suggestions would be find an epub editor, (never seen one sure one exists)
    or use Zoom on your device. It's not the best solution, but it shold at least make it readable.
    You can enable Zoom under Settings.

  • Sql is not working after changing from MsAccess into sql server

    Following Sql  is not working after changing from MsAccess into sql server. 
    sum(trn.sales) as sales,
    sum(trn.cost) as cost,
    sales - cost as profit // Here is not working . can we not use sales a column. Please advise
    from trn
    Kind Regards
    pol
    polachan

    It will not work if use two different column from the table or column  from two  different table
    Example
    sum(trn.sales * trn.rate) as salesAmount,
    sum(trn.cost) as cost,
    sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
    from trn
    Regards
    polachan

  • How can I change from paying with a credit card to using prepaid for itunes

    How can I change from paying with a credit card to using prepaid for itunes on ipad 2 .alrwady have app ID

    iTunes Store: Changing Account Information
    http://support.apple.com/kb/HT1918
    Apple ID Support - Manage Account
    http://www.apple.com/support/appleid/manage/
     Cheers, Tom

  • I am trying to re-instal Acrobat Pro on my computer after changing OS and resetting everything. I am using the CC panel for intallation. It shows it installed and won't let me install it.

    I am trying to re-instal Acrobat Pro on my computer after changing OS and resetting everything. I am using the CC panel for installation. It shows it installed and won't let me install it. I doubled check everything on my computer and it is not installed. Even more, all my PDF files now show an HTML extension rather that PDF and only opens in my browser, which means the program is not here.
    How to re-install it, please, when the CC panel installer won't let me do it? Thanks!

    Try "Pacifist"!
    Pacifist is an application for Mac OS X that opens up .pkg installer packages, .dmg disk images, .zip, .tar, .tar.gz, .tar.bz2, .pax, and .xar archives, and more, and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package

  • I bought a movie, the download completes, but then starts back from the beginning again using up more data, help,

    I Purchased the hobbit desolation of smaug, the download completes, but then starts from the beginning again, using up more data.

    Okay, you need to contact support definitely about what's going on. Here is a form that will send an e-mail into support for you:
    http://www.apple.com/emea/support/itunes/contact.html
    As far as the prices, the difference is likely the laptop version is the SD version and the iPad one is available in HD. That's the only reason you'll see a price difference. It has nothing to do with the device with movies/movie rentals. Apps yes, these no.

  • I want to download an album from Canada, it will not let me use my credit card on file, why?

    I want to download an album from Canada, it will not let me use my credit card on file, why?

    You can buy ONLY from the itunes store of your country of residence ( as proven by the valid billing address in your credit card) AND ONLY while inside the borders of that country.
    You would have to buy it elsewhere - Amazon, Wal-Mart, etc.

  • HTML eMail no longer works after change from 8100 to 8310

    Hello all,
    I have a Pearl 8100, which I upgraded successfully to version 4.5. Then I could receive and read HTML eMail, very nice.
    Now I got a Curve 8310 which I also upgraded to 4.5 supporting HTML eMail. In BIS I changed the PIN and IMEI numbers and the new device was registered.
    Now when I set eMail format to HTML and receive an HTML eMail, it only shows some lines (in nice new HTML) or even nothing and a hint, that more data is available with the number of bytes left. If I select the "More" option on the device, a transfer of data starts, showing that the Curve receives more data. Then the More-Data-Hint shows that only still one byte more is available, but the message still looks the same, showing only the first lines or even nothing. Repeating getting more data does not help. Seems the device has some problem parsing the data.
    What I already tried:
    - Hard reset of the device
    - Delete all service books
    - Resend service books from BIS
    - Enable/Disable HTML mail on device
    None of them helped.
    Network is German Vodafone. Both devices (Pearl and Curve) run Vodafone software.
    By the way: If I switch to text mode, I can see the whole message, but of course unformatted in the old format. Switching back to HTML again shows only part of the message or nothing.
    Does anyone have an idea what happened? Or who can I ask? There is no support hotline for private people on blackberry site.
    Thanks in advance.
    Joerg.
    Solved!
    Go to Solution.

    You can't delete the whole account, just the BIS email accounts.
    In this order, After deleting them, also delete the service books on your BB. 
    Reboot the BB, (battery out, replace and reboot).
    Look and confirm the SBs are gone.
    Now, reset up the email accounts in the BIS, and send the SBs again if needed.
    You should get new registration messages on the BB... and you might need to do a battery bpull reboot again.
    This process, in this order, will assure you get the NEW service books, rather than just writing over old ones.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem with Push Notifications after change from 3GS to 4S

    After I changed from my 3GS to my 4S I have a Problem with the Push Notifications.
    I only receive them on my old device, not on my new 4S.
    They both have different Phone Numbers, and i set the 4S up with a Backup from the 3GS.
    How can I fix this problem?

    I have the same phone, and have just had it replaced with an identical model and am having the same issue. I am going to go through Apple Care again and see what seems to be the problem. I never had any push issues with my 3G, except at the initial launch.

  • Third party Device settings after change from DCHP to PPPoE

    Hi,
    I have an AEBS 802.11n connected to a Dell Inspiron 6400 running Windows XP SP2.
    I was using it with an elderly non-wireless broadband router for internet connection, but I have just changed to a broadband modem instead. This change has resulted in my having to change from DCHP to PPPoE, and enter my ISP password etc into my AEBS instead of my router.
    I have wireless internet access via my AEBS, no problem. But since I have swapped it to PPPoE my computer isn't 'seeing' a locally connected device, which I have on an ethernet cable into one of the LAN ports on my AEBS. (The device is actually a 'virtual radar' radio receiver.)
    I have checked the physical connections, which seem okay. And the device was being 'seen' correctly via the AEBS before I changed to PPPoE, so I suspect this change may have a bearing.
    Can anyone suggest any other AEBS settings which may need to be altered to make the device 'visible' again please?
    Thanks

    Hi,
    Yes, thanks for that.
    I have, in fact, now sorted my problem.
    What I did was to reconfigure the IP range that my AEBS was covering. I did this in the AirPort Utility Internet tab by:-
    1. Changing from DHCP to PPPoE
    2. Doing that brings up four sub-tabs, one of which is DHCP.
    3. On the DHCP tab, you can set the 'beginning IP address' and 'ending IP address', and I adjusted those so that they matched the assigned IP of my missing device.
    As soon as I did that, the device reappeared.
    (No... I wasn't clever enough to think of that myself. I received expert tuition from someone on the comp.sys.mac.hardware newsgroup.)

  • Problem re-installing photoshop 8 after changing from Win XP to 8.

    I change from Windows XP to Windows 8.  I was able to reinstall Elements 8 but some of the functions I used are blocked. Example resize I can not change constrain proportions. Also I need more information about newer versions.

    Do you have Resample Image checked?
    What are the other things that don't work?
    The latest version of photoshop elements is pse 13
    https://www.adobe.com/products/photoshop-elements.html

  • AirPort Extreme  802.11n WiFi is blinking amber after changing from cable to DSL.  Everything works well; but light used to be solid green.

    I changed from cable to DSL yesterday.  Technician connected the new modem and all is working excellently, except that the light on my AirPort Extreme which used to be a solid green, is now blinking amber.  I know this is not right, yet everything else is working well.  What's wrong and how can I fix it?

    We need to do some troubleshooting to find out why the amber light is blinking, and to do that we need to know what operating system you are using on your Mac or PC.
    If you have a Mac, and are not sure what operating system it is using, click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X Version number that you see there.

  • Can only connect 1 computer at a time after changing from DSL to Cable.

    I have 2 laptops using Airport cards, and one Tower connected via ethernet to Airport basestation. With DSL no problem (DSL required PPPoE). With cable I can use internet assistant and restart each device and finally connect, but only one at a time. I'll set up one, then have to reboot everything to set up the next computer and lose the connection with the first. Cable needs to use DHCP it seems.
    To get it to work with the new modem I had to change the base stations configuration from distributing IP addresses to not distributing IP addresses. Methinks this has something to do with my not being able to get more than one computer working at a time.
    Any help would be appreciated. Have to iBooks, and a G4 tower. 2 running OSX10.4.10, and one wtih 10.5.2.

    Figured it out after about an hour talking first with Comcast, then Apple support. AEBS was not acting as router at all, and had been put in bridge mode.
    Easy solution once this was realized was to do hard reset (I thought I was doing this by unplugging the AEBS, but had to actually find and press the hard reset button) which reset all the settings at which point setup was pretty easy. Made sure it was not in bridge mode, did an automatic setup using the Airport utility, and voila. Everything including my new iPod could connect.
    Now if I could only have the 6 hours back that I spent going around in circles in bridge mode.

  • WiFi problems after changing from WEP to WPA on Actiontec router

    I need some help/advice--I've searched the forums but am not seeing my exact problem described so decided to describe it to see if the community can help me figure out what to do now. The situation is this: After recently learning about the insecurity of WEP "security" I decided to change the security settings on our Fios router (an Actiontec MI424WR, Rev C). I first tried to change the settings to WPA2, but then my husband's elderly Dell laptop could not connect, so I changed them to WPA. At first everything seemed fine--we could connect to the internet from our computers (my MacBook Pro, his Dell, and various devices--phones, kindle, iPad). 
    But we soon noticed some strange problems that I was never able to resolve:
    I could never get either of two Airport Expresses to connect to the network, even after repeated tries (with hard resets in between)
    Within an hour or two after rebooting the router, I was no longer able to connect wirelessly to a NAS device that is connected to the router via an ethernet cable--I could no longer even see it in the Mac finder. I could see it in Windows Explorer from the Dell but could not connect.
    Similarly, I lost contact with a Sonos bridge unit that is also connected to the router via an ethernet cable. In this case the loss of contact was sporadic--various devices that connect over WiFi to the bridge could sometimes see it, sometimes not.
     Resetting the router would temporarily restore wireless access to the devices hardwired to the router, but I would always lose the NAS device completely after an hour or two and the Sonos bridge sporadically. The computers and devices, however, had no problems connecting to the router itself and from there to the internet.
    I finally gave up and returned the security to WEP, and now everything is fine: the Airport Expresses connect, the NAS remains available, and the connection to the Sonos bridge over WiFi is robust (the Sonosnet mesh, if anyone is wondering, was never affected).
    I can't understand why switching to WPA caused such problems, but it clearly did, since switching back to WEP eliminated them completely. The simplest explanation is that there is some problem with the wifi portion of the rev C router that only becomes apparent in certain circumstances, though it seems weird that both wired peripherals and wireless airport expresses were affected. 
    Whatever the causes of the problem, now I'm back to wondering how to improve the security of my network. Should I:
    See if I can convince Verizon to replace the modem with a newer version? We have had this one for more than 4 years, since we first got fios.
    Just go ahead and purchase the most recent version of the Actiontec router (rev G)? It's only about $115--worth it to me if I can use WPA with it. 
    Buy our own wireless router, perhaps an Airport Extreme, and turn off the wireless on the Actiontec.
    Thanks in advance for any help. This is driving me crazy, and I really don't like feeling as if the network is vulnerable, especially given how extensively we use it.
    Becky

    This doesn't sound too uncommon. I had similar issues in the past with some networks I've worked with that were resolved by moving the router actually to WPA2 or by updating the firmware. The ActionTec MI424WR Rev. F, G, and I require the use of WPA2 since they have Wireless N radios in them so WPA wouldn't be of much use. My old Linksys WRT54GX also had similar issues, but that was a result of the Wireless Radio dying along with a mix of newer hardware not playing nice with the old, no-longer-supported firmware. I retired that router, only to bring it back into service as a Wired router at a friend's home (shutting off Wireless and setting up another as an AP) which replaced an old BEFSX41 which didn't have enough power to handle his Cable connection.
    Besides a few software bugs at play somewhere, there isn't much that could cause the wireless to slowly stop working like that. I would suggest moving back to WPA2. For the older Dell laptop if it's running Windows XP, make sure at least Service Pack 3 is installed if it hasn't been getting updated. Also, check for updated drivers for the Wireless card since they may be needed as well. A bit of searching on the Wireless card should also indicate whether or not it supports WPA2 encryption. Anything from the mid-2000s should support it.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • No total recall after change from Windows Logic Platinum 5.5.1 to Intel Mac

    Hi Logic-users,
    up to now I was using Logic 5.5.1 on a Windows-PC. Some days ago I changed over to Intel Mac and Logic 7.2.3. When opening a 5.5.1-Song it is converted from ASIO to Core Audio. But then I got a problem with spectrasonics Stylus RMX which I use as a drum-plugin. It was a VST-plugin in Logic 5.5.1 and is now the new Intel-nac-Version (audio-unit-plugin) in Logic 7.2.3. The MIDI-data is in the Logic-tracks but the problem is: the program doesn't use the new Stylus version automatically - there is only the outcrossed name "Stylus" in the Logic-channel. I have to activate it by hand - and then all the drum-channels within Stylus are empty. That means: I have to re-edit all the Stylus-drumsounds and -settings by hand.
    What can I do to get real total recall? Or is simply not possible because I had too much change altogether (new OSX-platform / new Logic-version / new plugin-version)?
    Best regards,
    Thomas
    Mac Pro 2x 2,66 GHz 2 GB RAM   Mac OS X (10.4.8)  
    Mac Pro 2x 2,66 GHz 2 GB RAM   Mac OS X (10.4.8)  

    Thomas,
    I'm pretty sure you're out of luck on this one, I'm afraid. The differences are to much to be able to translate from one to the other.
    We all went through it when we switched from Mac OS9 to OSX. Then we all had to go through it again when Logic went to Audio Units.
    If it was a matter of VST in OSX, you could probably open it up in Logic with Fxpansions VST to AU wrapper, but I don't think you'll bee able to get it from the PC VST version to the Mac OSX VST version.
    You'll have to try and recreate the RMX settings by hand. Tedious, I know, especially if you had done a lot of editing.
    Another option would be to open the song on your PC, and bounce the various RMX parts to audio files, and re-import those into Logic 7. I know that's not the same, but if you were done with the programming aspect of that song, it could at least get you the sounds back.
    If anyone has information to the contrary, I'd love to hear about it. But this is how I understand it to be...
    Sorry.

Maybe you are looking for