After changing my 1st cartridge Envy 5530 printer wants to realign and scan each time it's turned on

After changing my 1st cartridge Envy 5530 printer wants to realign and scan each time it's turned on. When I do this, it says "Scan not detcted." After a 2nd scan, it sets itself to default settings. Then I can use the printer. Is there a way to turn off alignment?
This question was solved.
View Solution.

You might try resetting the printer. It could clear your issue.
Steps
Press the Power button () to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button () to turn it on.
Hope that this helps.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Similar Messages

I can't hook my ENVY 5530 printer to my Chromebook? Can you help me?

I cannot hook up my ENVY 5530 all-in-one printer to my HP Chromebook. Can anyone help me? I can't even download the installation software onto my Chromebook. Thanks.

Hi Volksmarch,
Welcome to the HP Support Forums. I understand that you have a Chromebook and an Envy 5530 printer and would like to get them setup and running.
Let's start by getting the printer onto your home wireless network. That can be done from the front panel of the printer using the Wireless Setup Wizard. If you are unsure how to do this the steps can be found on page 55 of your User Guide.
Now that the printer is connected to your wireless network we need to setup the ePrint feature of the printer. I have included the Getting the Printer Claim Code. Once you have the web services information sheet with your printer claim code, please follow the steps in Setting Up a Custom Email Address for ePrint.
Now that we have customized ePrint email address we need to set up Google Cloud Print. Please follow the instructions in Using Google Cloud Print with your HP Printer. Please follow the steps for an ePrint-enabled printer. You should now be able to print.
If you run into any issues with the above, please let me know at what step things went awry and the contents of any error messages.
Have a good weekend.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HT204347 My MacBook Pro shut of three times yesterday after plugging my phone in but I managed to switch it back on each time. I left it to rest for about 20 hours and then today it Has been working fine

My MacBook Pro shut off three times yesterday after plugging my phone in but I managed to switch it back on each time. I left it to rest for about 20 hours and then today it Has been working fine all morning. Using indesign and Skype which usually slow it down anyway but it's been fine. Then I plugged my iPhone 4S into it and it just shut off again. But this time it won't switch back on. No idea why this has happened but I hadn't saved my work either. I'd not long plugged the charger in to it but now, it's still plugged in, but the light on it is very dim and is just flashing.
No idea what to do. Please help!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Plz hlep my : iso 7 4s /There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz hlep me
<Personal Information Edited by Host>

There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
Imei: 013055008069758
SerialNumber:DN*******TC0
mlbserialNumber: DQ************42D
plz plz plz hlep me
<Edited by Host>

There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
and
I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
iOS 7.0.3

Trying to change the APN on my iPad for a new data provider. Each time it returns to the original. Any suggestions?

trying to change the APN on my iPad for a new data provider. Each time it returns to the original. Any suggestions?

Hi Canberabomber,
If you are having issues setting or changing the APN on your iPad, you may find the following article helpful (apologies if you have already seen it):
iOS: About cellular data network settings (viewing or editing the APN)
http://support.apple.com/kb/ht2283
Regards,
- Brenden

HP Envy 5530 - Printer Cartridge Issues

I have had my HP Envy 5530 for about 6 months now. It used its first set of cartridges (HP61) and was half way through the second set of cardtridges when an error appeared reading:
"The indicated cartridges are not compatible...."
I know for a fact that the second set of cartridges are brand new HP61 cartridges. They worked for quite a while and then the error occurred.
Thinking that the second set of cartridges had a problem I purchased another set of brand new HP 61 cartridges. Immediately the same error occurred.
I tried everything to get the printer to work to no avail.
Please help me out on this HP techs.
-Kenji

Hi,
Please check the following answer:
http://support.hp.com/us-en/product/hp-envy-4500-e-all-in-one-printer-series/5304875/document/c03747...
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Deskjet 2560 Windows XP: gear, crunch-like noise after changing the black cartridge, no print

After having changed the black cartridge, the cartridge holder tray went on teh rest position. I launched a new print and heard a crunch-like noise on the tray, as something was trying to gear up. After a while the cartridge holder came back to the rest position but no printing was obtained.
Thanks for your support

Hi - Try following the steps in this document. Specifically take a look at the section for The Resume Light Blinks and A Message Might Display on the Computer and follow the solution for the Carriage Jam.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Canon BJC85 stopped printing after change of ink cartridge

Hello,
my mother uses the small Canon BJC85 in combination with her Mac mini. But after she changed the colour printing head against the black only printing head, she can't print any more with the standard driver (GIMP works, but the quality is bad).
Each time she tries to print, printing is stopped without further explanation. After searching for a while, I found in an error.log at /var/log, that the driver posts an error message there stating that the print head doesn't fit to the setup. But I don't know how to change the setup (and anyhow, this is a Mac! It should change the setup by himself?!). I posted the question at the canon support page a week ago, but didn't get an answer.
Any ideas from you who to clearify this? Resetting the printing system as described in Apples other forums doesn't help.
Thanks in advance,
Gernot

Solved by buying a laser printer from OKI.

IPad no longer connecting to HP Photosmart Plus B210 after changing black tore cartridge

I had my iPad nicely connected to my HP Photosmart Plus B210. However, after changing the black tore cartridge I am no longer able to print from the iPad. The printer statur report and the wireless network test both show everything is OK. Most of the time the iPad recognizes the printer and accepts the print command without any error messages. However, sometimes it returns the message that the printer is offline even though it found the printer earlier. Any solutions? Thanks

I too have a B210 and the IPAD has printed marvelously via WIFI for about a half a year. Now, when the IPAD print radio button appears it still lists the B210 is available as if all is good but the printer doesn't come to life when the print command is issued. Printer sez it is connected to the router, too. I have reset the router and the printer a number of times and the printer sez everything is good. But, I can't print any longer from the IPAD. bummer.

Authentication code for Envy 5530 Printer

I have an Envy 5530. When I had a problem with scanning I phoned HP and the off shore rep screwed up my HP print functions so badly, I am still suffering and will not phone back. I need the authentification code info on this printer. I have all passwords I have set but nothing works. No way to get help to get this code. I need to change settings and can't without this authentifacation code. Thanks for any help. I really can't afford to buy another computer but have not been happy with this one. My old Lexmark worked well but I junked it when I got HP Printer wanting the Eprint functions. Been sorry ever since.
Thanks again.
This question was solved.
View Solution.

Hi @Soonerlady ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Cannot change preferences on hp envy 5530

I have an HP ENVY 5530 all in one printer. I reselected my print preference from General to Photo. Now the preferences all show a padlock and I am unable to change the current Photo setting. please help.

This might happen if you are not logged in as the administrator. Does this still happen when you are logged in as the administrator?
http://windows.microsoft.com/en-ca/windows7/how-do-i-log-on-as-an-administrator
Also, to provide the best print quality, when you select certain print setting combinations, other preferences which cannot be applied are grayed out.
Are all the preferences locked or only some?
I work for hp.

ENVY 5530 printer showing offline on ipad

Just bought the ENVY 5530. Set up on home computer is fine, but not able to print from iPad. Keep getting error message stating printer is not online.
I've checked printer status on HP Connected and it shows online. Wifi connection indicator (blue light) on printer control panel is lit and not blinking. How is it possible that the iPad can locate the printer, but still come back with a message that the printer is offline? How else could the iPad locate the printer - makes absolutely no sense.
Any guidance is greatly appreciated. Please do not send me the following lnk as I found it to be useless.

Hi There,
You should be able to print using the iPad's in built printing app, AirPrint.
On IOS7 when selecting your image to print, try following the steps below:
If you're still not able to print using AirPrint, then I'd suggest powering down the printer and plugging it out for 30 secs before powering up again. If you still can't print, I would then restart your iPad and try to print again.
When you click the options Icon you should then be able to select the print Icon below: (You might need to scroll right after you hit options button to see the print icon)
You should then be in a position to select your printer. If the wi-fi function is on, then it should be visible.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

After change HDD for my MAC, How to transfer music, video and app from my IPAD to new iTunes

after change Hard disk for my MAC, How to transfer music, video and app from my IPAD to new iTunes,

you can only transfer music and video you bought on the ipad
this is don by choosing it in the menu called transfer purchases to itunes or something like that
apps can only be bought once you in itunes you can always choose purchases and show apps not on this ipad and get it back that way

Printing the same page or range each time ctrl-P is selected

Has anyone figured out how to set Indesign to leave the page number or current pages each time the print dialog box is opened. Pagemaker used to do this and each time we have purchased Indesign the sales people tell us that this was fixed. After downloading and installing 3 diffrerent versions, I come to believe that all sales people are liars or they don't know their own product.

See this -
https://support.mozilla.com/en-US/kb/Firefox+crashes

After changing my 1st cartridge Envy 5530 printer wants to realign and scan each time it's turned on

Similar Messages

Maybe you are looking for