After changing my battery...

Soon, I'll be replacing my 30gig ipod battery....will I have to reload all my songs from my iTunes library????

Hey there,
No, replacing the battery has no effect. All your music and such is stored on your iPod's hard drive. You should have no worries. Hope this helps.
B-rock

Similar Messages

  • HT3176 my apple remote will not link to my appletv even after changing the battery

    my apple remote will not link to my appletv even after changing the battery.  can anyone help?

    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • T43p - Mouse pointer freezes after changing the battery to a new one

    Hello,
    I have bought a new battery for my IBM Thinkpad T43p. In the description of the new battery I have seen that this battery is compatible with T43 series. Battery details are: DC 10.8V 5200mAh/56Wh. Replace: 08K8214.
    My problem is:
    I have ordered a new battery for my Thinkpad T43p but when I turned off  the notebook and replace the old battery with the new one the notebook became strange. I use Windows XP Prof on this computer and when the login screen appeared and during I was typing my user name and password the mouse pointer was freezed and I had to turn off the computer. It was happened within approx 1 minute after the Login screen appeared. The symptom was the same with or without plugged in AC charger. I have tried several times and the same behavior was happened. When I changed back the old battery the computer became normal again without any freezing. The fan was working properly in both cases. The symptom is the same if I change the battery during AC charging and using Windows. 
    I don't have an idea about the reason of it. Can you help me with ideas?
    Thanks in advance,
    Slider

    Pull the battery out and run the machine on AC only. Does it freeze now?
    If it doesn't, the "new" battery needs to be replaced.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • After changing the battery in my iphone 4s, the phone will not boot up. I only see the apple and when it sits for a few minutes, a code shows above it. What is going on? Did I damage the phone by replacing the battery?

    My sister gave me her iphone 4s for my son. It needed a new battery so, I bought one and replaced it. after doing so, it will not power up. I can only see the apple on the screen and when left for a few minutes.... 10 lines of numbers and codes show up at the top of the screen. Did I ruin the iphone by replacing the battery? Was a simple switch so I don't understand what is going on. Have never had one of these before.

    iPhones are not user servicable.
    Take the device to a competent repair person or buy a new one.

  • After changing my battery, everything disappeared?!

    My battery on my macbook completely died so I bought a new one and replaced it. For the first hour everything was fine and I let the computer die. I charged all night, woke up this morning and turned the computer on. Everything was gone and it reset back to pretty much new. Pictures, music, school work. I mean everything is gone. Can anyone help??

    Are you in the correct account. Try logging out then log back in to your account

  • Click Wheel not Working after changing battery.

    After changing my battery on my IPod Mini, the click wheel isn't working properly. I can press the menu,select,play/pause, forward and back buttons, but I when you rotate your finger around the wheel it doesn't work. Any suggestions??
    Inspiron   Windows XP  

    Hmmmm... If you changed the battery yourself, you might have damaged the click wheel when you took it apart. Re-check the wire that connects it to the main circuit board, and if not that, examine the click wheel itself. If apple changed the battery for you, call them because it's not your fault.
    Good luck...

  • My iphone battery is not working properly as compare to earlier after IOS 7 Update. should i change my battery and if yes then how much it costs in india?

    My iphone battery is not working properly as compare to earlier after IOS 7 update.
    Should i change my battery if yes then how much it will cost in india??

    Turning off things in settings, restoring as new phone, etc. everything I've seen on forums and CNet etc sites

  • So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

    So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone  shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
    Cannot receive any signal "searching" constantly.
    Turns off as soon as removed from usb ... wont stay on connected to laptop!
    HELP!

    The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
    Hardware can fail - it happens, which is why there is a one year warranty.

  • My iphone 4 keeps restarting after i changed the battery

    my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

    my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

  • My remote wont turn the appletv on even after changing battery and unplugging everything and plugging it back in

    my remote wont turn my appletv on even after changing the battery

    Nothing, the light didn't flash at all? If so you either have a dead remote or a dead Apple TV.
    If you have a Mac you can try pairing the remote with it to test. Go to System Preferences->Security & Privacy and unlock the panel. Click the Advanced button and look for the Disable Remote Control Infrared   Receiver checkbox. Clear it and click the Pair button. If the remote is ok you should be able to pair it to the Mac.
    If you can't pair the remote it most likely pints to a bad remote. If the Apple TV still won;t respond then you need to get the Apple TV looked at.
    Good luck

  • Very weak wifi signal after i change the battery

    i recently change my playbook battery. everything seems perfectly okay except that i have a very weak wifi signal reception. i need to be very near the router just to have the signal. i dont know what went  wrong during the changing of battery process but everything is okay except the very weak wifi signal received. please help.

    Looking at the photos in crackberry forum it's the white antenna cable, antenna is top RH corner as you look at the screen. There may be an antenna component inside the back (according to ifixit)  but the cable terminates in a little pcb possibly marked 3G.  Blue cable seems to be BT and grey is GPS. The TI chip supports all three functions, single cable for each. That is why 802.11n is only 65mbps.
    Come back if that's not correct.
    Thanks to crackberry and ifixit if it is.

  • Reset System Management Controller after changing battery?

    I am planning to change my battery. A friend told me that I should reset the power management system, which I assume meant the System Management Controller, in order to reset the battery cycles. Is this correct and how do I do it?

    The battery cycle info is contained within the circuitry of the battery. It won' hurt to reset the SMC but it isn't required
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • IPod mini stuck on Hold after changing battery

    I just replaced the battery on my 4gb iPod Mini. prior to changing the battery, I moved the "lock" switch to the locked position (per the battery vendor's instructions). I replaced my battery & have twice restored the Mini to it's original settings, but the lock icon won't disappear when I toggle the switch. when I slide the as a result, I can't play anything. I can add music/podcasts to the Mini, but I can't play them. does anyone know how to fix this problem?

    Try resetting the iPod mini by holding in the center button along with the up button. Hold it in until you see the Apple logo appear. If resetting it doesn't work, let me know.

  • Iphone 4, purhcased 4/12, reluctant to turn on after fully expended battery in the past,  now will not power on, communicate w/ itunes, tried restore -error 3194, then error 1600.  help me please...do I have a warranty?

    I purchased an Iphone 4 in April of 2012.  I always keep it on and charge it every night.  I have had some trouble turning, a couple of times, in the past.  It was simply reluctant to turn on after allowing the battery to be completely expended and has behaved the same way after being manually turned off.  I have again allowed the battery to completly die and turn off the phone.   This time it will not turn on at all.  I have tried various combinations of pressing and holding home and power to no avail.  I plugged it in to the computer, but Itunes will not recognize it as my phone.  Itunes is labeling it "Iphone" and has requested that I restore the phone in order to use it with Itunes.  Itunes states that "has detected an Iphone in recovery mode".  I, reluctantly, attempted to restore the phone.  After waiting quite a while on a "software update" to download, it said preparing Iphone for restore and then said "unable to restore Iphone, unknown error - 3194".  I read, online, that I needed the most recent version of itunes in order to restore.  So I upgraded Itunes and restarted the compluter.  On the second, and all subsequent attempts to complete the restoration, I am prompted with a message stating "unable to restore IPhone, unknown error - 1600".  My computer also attempted, and I believe, successfully, installed new device driver software for iphone4 (DFU mode).  Any assistance would be greatly appreciated.  Also is my phone, purchased 4/12, under any service or replacement warranty.  I truly feel it should be easier to turn on and I did not even want to restore the phone, I just need to use it. 
    Thank you,
    Geoffrey

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • Directions for changing pram battery on imac DV

    Hi,
    A friend of mine has an imac 400 DV slot loader with a dead pram battery. I look after this computer for them but have never changed the battery on one of these. Can anyone give me directions and/or photos? I've had a look through older questions but the links all seem to be out of date.
    Thanks,
    James

    This Macworld article has photos that illustrate removal of the bottom housing and EMI shield, to access the motherboard for upgrades. Some experienced users have been able to replace the battery, by accessing it through the memory door on the bottom. This involves the risk of letting it slip out of your fingers and then having to maneuver/tilt the iMac about, to remove the loose battery. Prior to removal, you should note the battery's orientation as to polarity (marked on the motherboard).

Maybe you are looking for

  • Serious performance problems on iWeb site

    Can anyone help me find the problem with peterlance.com? It looks like author Peter Lance uses iWeb to update his web site. He redesigned it recently (and did not use iWeb for the old design). Anyway, it has serious performance problems on Internet E

  • Transfer Large Amounts of Data From External to External Drives

    I have 4 each 1.5TB USB 2.0 drives that contain music & movies for use in itunes or apple tv. I purchased two 3TB Thunderbolt drives and would like to transfer the data from the 4 each 1.5TB drives to the new 3TB Thunderbolt drives How Do I Do This?

  • Regarding type c

    hi,    i have defined a input field  " type c "for the selection screen in which the user can write his name ,after giving the name in the lower case when i press enter it will converted to upper case why this is happening as i m passing this variabl

  • XI Security Service Users

    Hi All, I have no created the recommended Service Users for our XI. XIREPUSER - SAP_XI_IR_SERV_USER XIDIRUSER- SAP_XI_IR_SERV_USER XIISUSER- SAP_SLD_CONFIGURATOR; SAP_XI_IS_SERV_USER XILDUSER - SAP_BC_AI_LANDSCAPE_DB_RFC My questions are now: Why do

  • It is a sad day ..... DNS?DHCP update to DDNS

    Hi, It is a sad day as I have shutdown one more Netware box. (One more Netware server to go) I have moved my DHCP/DNS to SLES10sp3 with OES2sp3. DHCP is working and I can see the addresses in the lease file. DNS is also resolving. The only issue is t