After charging my 5th gen ipod on vista computer, it is no longer showing on itunes/windows xp.

i have only been able to set the ipod to Disk Mode, itunes/windows XP then finds the ipod, it then tells me i need to restore which i do, it then starts to restore then tells me it needs to diconnect to finalise but will then appear in itunes.  however this does not happen, the ipod just shows the apple logo, and does not reconnect to itunes/windows XP.
Can anyone please advise me of what i need to do.
thanks.

Hi Chukwudinma!
Here is an article that will help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for using the Apple Support Communities!
Cheers,
Braden

Similar Messages

  • IPod will no longer turn on or even charge.  (5th Gen iPod)

    One night I was using my iPod like I normally do. It was half way out of battery. I left my iPod on my bed and went to the kitchen. I got back in around 3 minutes. I went to grab my iPod and pushed the power button and it didn't turn on. I then pressed the home screen button and wouldn't turn on either. My iPod now does not want to turn on at all. I put it to charge and it won't turn on that way either. What should I do?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • How do I connect a 5th gen ipod to my computer

    I just bought a new ipod touch 5th gen and it will not connect to my itunes.  My itunes it 10.6.3.  What do I need to do?

    You need iTunes 10.6.8 or later and iTunes 10.7.
    Also see:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Mac OS X v10.6: iOS device not recognized in iTunes after restart

  • Dock for 3rd Gen. iPod Won't Work w/ 5th Gen. iPod?

    I have a third generation (G3) iPod, which came with a docking station and an iPod-to-firewire cable. I also have a fifth generation (G5) iPod, which did not come with a docking station, but did come with an iPod-to-USB cable.
    I can charge the G3 iPod using the dock and the firewire cable, but the G5 iPod won't charge using that same dock, nor will iTunes recognize the G5 iPod. Even if I plug the USB cable into the dock instead of the firewire one, it won't charge or get recognized.
    Am I doing something wrong, do I need a different cable, or do I need to get one of the new docking stations? If the latter, will that docking station work with both my G3 and my G5 iPods?
    - Keith

    Yes, the universal dock with work with the 3rd generation iPod--you can check the specs through the Apple Store's product description page. I also know that you can't charge the 5th Gen iPod using the 3rd Gen firewire cable + adapter (I asked about that at the Apple Store today).
    What I'd like to know more about is why the 3rd Gen Dock isn't compatible with the 5th Gen iPod even if you use the USB connector. So this is "helpful" but I'm echoing your question about the dock: Why Dock 3 work with iPod 5?

  • How do I use 5th Gen iPod and 2009 Civic USB?

    I tried everything I can think of to get my iPod working with my 2009 Civic. From what I've read in the manual, I just be able to plug it into the USB and the car finds it, displays the Honda "H" logo/mark on the screen and away I go. I wish it were that simple.
    I have a 5th Gen iPod with verison 1.3 firmware. It's formatted for Windows so it's a FAT32 storage format. I restored the iPod and put the music I wanted back on it so I could test again and still no dice. I don't have another iPod to test with.
    Is there something I missed? Anyone help me? Thanks in advance.

    The problem ended up being the controller board/card/box (whichever of these) in the car that was malfuctioning. I gathered that they had to do some diagnostics, comparitive testing (with another vehicle and audio system known to work), and test my audio system before isolating and replacing the controller.
    I bought my Honda Cerified Used, so it was all covered by the dealer and Honda. I asked what it would cost had the car not been Cerfited Used. I was given an estimate of $350 USD. I know labor alone was $198 USD.
    So, if you are expericing the same issue of no connectivity between your Honda and i(Device) and your car DOES NOT display any sort of error message on the audio system, this may be your problem. If you wish to get it fixed without a warranty to cover it, the cost will neighbor $350 USD. An alternative and cheaper option is to buy a headphone to headphone jack audio cable, plugging one end into your AUX outlet (if equipped) and the other your i(Device). Plugging into the AUX outlet does not charge or let you control your i(Device) through the car stereo.
    Thanks planb77 for responding to my post.
    Cheers.
    Zman

  • My apple 5th gen ipod is connected to wifi but still cannot access safari and other websites..can some1 help me out?

    my apple 5th gen ipod is connected to wifi but still cannot access safari,itunes and other websites. the ip address is not strtng wid 169 and i have reset the network settings also..can some one help me out

    The 169 IP address mans it did not correctly negotiate with the router:
    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT1923 Hi, I have a iPod touch 4th generation and I does not show in iTunes. It comes up as charging when it is plugged into the computer but just not in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Hi, I have a iPod touch 4th generation. It comes up as charging when it is plugged into the computer but it does not show in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Try here  >   - http://support.apple.com/kb/TS1369.

  • 5th gen Ipod not recognized and not charging on any computer.

    Hello
    I have a 5th gen Ipod with an odd issue. I have an Ihome radio with Ipod dock in which my Ipod charges and plays everthing just fine. I usually just keep it there to charge and only hook up to my computer if I want to buy something or put other music on it. I tried syncing the other day and nothing happened, would not sync, charge, my computer would not even recognize it. I have tried 2 differnt cables, reset, have tried it with itunes started and not running on my vista computer and have also tried just to charge on a computer with XP that doesnt have Itunes installed. My daughter has in Ipod Touch that works just fine with both my cables and computers.
    Any ideas of whats wrong with my 5th gen?
    Thanks

    Try restarting your computer with your ipod plugged in. You might also try using a different USB port. If all else fails downgrade to itunes 6 here http://www.apple.com/support/
    kEat0n

  • 5th Gen IPOD 60gig Lockups after upgrade to 1.2

    I own 2 60gig IPODs and two XP computers
    Successfully updated to Itunes 7 but after upgrading the
    IPOD to 1.2 the IPOD started locking up. On the main menu it would lockup. I tried all suggestions on this forum
    and using my wifes XP, I was able to restore the IPOD back to 1.1.1 (This required resetting twice while using the old update function.)
    After ITUNE 7.02 came out I tried again with the same result
    This time with both 5th gen IPODs on Both XP machines with the same result. Both IPODS would lock up after upgrading to Version 1.2
    Now the Libraries are not backward compatible with ITUNEs 6
    so I uninstalled ITUNES 7 and reinstalled ITUNES 6 using the CD that came with the IPODS and successfully restored
    the IPODS back to version 1.1.1. Then upgraded both XP
    machines to Itunes 7.02 and warned my wife and my dog and myself to never follow the option of upgrading the IPOD
    when asked by ITUNES...
    Does anyone have any ideas as to
    1) When if ever will I be able to successfully upgrade to 1.2 and use the games and watch the TV show I purchased
    on my IPOD ?
    2) Has anyone using XP with USB 2.0 successfully upgraded.
    to version 1.2 Am I the only one having this Problem?
    3) Would it be possible to go to the APPLE store and Ask them to Format and UPGRADE the IPODS to version 1.2?
    4) Would it be possible for someone from Apple to respond
    to this issue on this Forum?
      Windows XP  
      Windows XP  

    Applied Firmware Update 1.2.1 and it worked...
    Thank you Apple for finally fixing a major problem
    without ever acknowledging you had it...
    or even indicating what you update fixed when you distibuted
    it...
    I think apple needs some lessons how to provide support...
    without irritating its customer base...
    All you have to do is communicate...
    Respond with a message like "Known Problem" working on fix.
    would do wonders... And having an apple employee update
    the Discussions with an indication that you acknowledge
    your user community is having a serious problem and thank them for continueing to wait for a fix..

  • Suddenly, after 9 months ownership my 5th gen ipod touch (1OS 8.1) has started filing photos in AEE format which I can't open on my computer. What's the cause

    AEE file.   Suddenly after 9 months ownership my 5th Gen ipod touch (iOS 8.1) 32GB has started to file photos as AEE files (straight photos no cropping or filters) ..... which my computer (XP) cannot open.    Can anyone give the cause and solution please.

    How are you importing the photos?
    Also see:
    iOS: Edited photos show original photo after import or in other apps - Apple Support
    You can
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • 5th gen iPod lost and will not play videos after connecting to iTunes

    I have a 5th gen iPod. When last connecting to iTunes, videos and movies disappeared. Purchased a new movie that iTunes says was compatible with 5th gen, movie won't transfer to iPod. My settings state that I will manually manage videos and music. Performed all 5 "R"s and iPod still won't accept movies "...can't be played on this iPod"

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • 5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

    Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • 5th gen iPod Classic not recognized

    Hi, I have a 5th gen iPod classic 30GB that my friend gave to me a few months ago. It was recognized on my computer and itunes at the start and I was able to sync and perform all the needed tasks. I recently had to reformat my computer and now the ipod isn't recognized by USB, or in itunes. The Device manager for Windows XP SP3 says "Unknown Device" and that the drivers for the device are missing. I've tried installing older itunes verions, searching for drivers myself, used 3 different Apple USB cables, restarting the ipod with the center + menu buttons, and checked the format (windows). I also have a 2nd gen ipod nano which is recognized with no trouble. All the tests on the classic, with the exception of firewire, passed and the hard drive works fine. The classic also isn't recognized on 2 other Windows 7 computers. If I try to put the ipod in disk mode, it just says "ok to disconnect" without giving me any other options. Also, the ipod charges on both wall USB and the computers USB. I have also tried all 6 USB ports. I've searched the web for days and have tried everything I could find to fix this, to no avail though. If anyone knows anything and can help, please post whatever you think will work. Thank you!

    When you plug in the iPod does it even appear in Device Manager?  See this article for more details.
    http://support.apple.com/kb/TS1496
    Otherwise, I have a feeling that the USB ports on the Netbook don't output enough power to allow the iPod to fully communiate properly with the Windows Vista O/S.
    B-rock

  • 5th gen Ipod not playing in any docking station

    I have a 6th generation ipod classic that works great in my pioneer receiver and in both cars. I bought a 5th gen ipod on ebay for my wife and it seems to work just fine.
    I restored it using itunes, then put synced songs to it. Everything works fine when it's connected to Windows but it won't play in any docking station. It gets a charge from the station, but won't play.
    Does the 5th gen ipod not work in docking stations or is it possible mine isn't functioning right. I contacted the manufacturer of the station in one of the cars and they said all ipods should work.

    I have the same problem with a Pioneer X-HM50-K hifi system. My 5th gen ipod (system 1.3 which up-to-date iTunes claims is up-to-date, tried resetting/restoring/all that), when plugged into the docking bay, pauses the music and shows a tick mark after a while with the text "ok to disconnect" beneath it. The tick mark becomes a Pioneer logo after a while but that does not change the fact that the ipod does not react, neither to the command buttons on the Pioneer system (or on the remote control) nor to the buttons on the iPod itself (those do 'click', but have no effect). It does get charged, but doesn't play, just as in the top posting.
    A friend's iPod nano works just fine on the Pioneer, and my iPod works fine for everything else (headphones, iTunes, other docking systems I tried at friends', ...). So there seems to be a specific incompatibility with Pioneer systems.
    How can this problem be investigated and solved ?

  • Podcasts listened to on classic (5th gen) iPod don't sync to iPhone

    I have the feeling this has been covered before, but I get lost in threads of various ages talking about various versions of iOS, various versions of the Podcasts App, etc. 
    I have an iPhone 5C with the most current version of iOS (7.1.1) and the Podcasts (2.1.2) app.  My 17" MBP has the most recent version of Mavericks (10.9.3) and iTunes. (11.2.2).  I also have a 60GB, 5th gen iPod.
    Before I got my iPhone, I would plug my classic iPod into the Mac to sync.  Worked flawlessly.  I would download new podcasts episodes into iTunes, plugging in to sync would update the played count on both the computer and iPod depending on where I played them, and mark the played episodes to delete, and push new episodes to the iPod. 
    When I set up my iPhone, there was some oddness originally with random old episodes showing up on the iPhone, which then propogated back to the mac.  I marked those as played, which got rid of them, and haven't had that problem again.  I have my iPhone set up with the Sync tab on, refresh at every 6 hours, limit episodes off, delete played episodes on, cell data off.  I have the download episdoes off for now, so the phone itself only updates episodes when I sync to the computer.  I recently changed that.  I'm not sure if it will effect anything.  I generally sync the iPhone over the wifi, although I do plug it into the laptop to charge at night - I'm not sure if this intiates a sync or not with the laptop lid closed.
    The podcast app seems to work perfectly if I use the iPhone as my listening device.  I listen to something there, and it shows up as listened to on the Mac, changes propogate there well.  Later, if I plug in the iPod, it reflects those changes.
    The only problem I seem to be having so far is listening to podcasts on the iPod.  If I listen there, when I plug it in to sync with the Mac, those changes show on the mac.  Later, if I sync the iPhone, however, changes that originated on iPod do not sync to the iPhone, even if the Mac is reflecting those changes, do not sync to the iPod.  So I play one of three new episodes of a podcast on my iPod, sync it, my Mac now shows only two new episodes of that podcast, my iPhone still shows three unplayed episodes, even after a sync. 
    Is there anything I'm missing?

    Well i have a solution that does not get messy.
    very simple:
    1. Make Sure your all your iPod songs are backed up.
    2. Restore iPod to factory settings
    3. re-sync iPod media
    4. enjoy.
    Hope this helped
    ~Fox

Maybe you are looking for

  • Cannot select multiple video clips at a time

    With the previous version, I could simply select all and import all my videos and pictures at once, in the order I copied them to my hard drive. Now, I have to "select entire clip" then, press letter E on every video clip, then, go back and add pictu

  • It is possible to reuse the obfuscated password from a dads.conf in the apex listener?

    Hello there, Little by little we are moving to the APEX 2 listener, good! But the problem is that every time that somebody ask me for a new set up I have the same problem: I go to one of our DBAs (nice guys by the way!) and ask, "may I have the passw

  • Unable to open Notes

    I mentioned this in a similar thread in the iPhone 3Gs forum, but I have an iPhone 3G, so I figured I should post it here too. I am unable to access Notes: the app opens, displays a blank note for a few seconds, then crashes back to the main screen.

  • Insert JPG into Excel

    I'm using MX7 and I create a JPG file using cfchart but I need to insert that JPG into excel with ColdFusion - how do I do it? Cfchart is working and I'm saving the file to a location without a problem but can't figure out how to insert it into excel

  • ODBC / MFC: Numbers are mapped to String

    Somebody else had a comparable problem a few months ago, but so far I found no solution. We have fields in the database defined as number(11). When we read them via ODBC (using the latest Oracle ODBC driver) in Visual C++ 6.0 (service pack 4) with CR