After choosing the graphics card (Quadro 4000) as recommended by adobe  ..we have problems....

http://helpx.adobe.com/after-effects/using/rendering-opengl.html
http://www.nvidia.com/Download/index.aspx?lang=en-us
After choosing the graphics card (Quadro 4000) and then adobe as the partner the following applicatons are shown. I have noticed that the only CS6 product is the Premiere Pro CS6 but we do use the whole Adobe Master Suite.
Can Adobe please provide clarification on what version of driver is required for the Adobe Master Suite CS6 when using the Quadro 4000 graphics card in windows 7 64bit (pro)
We are having constant problems with crashing programs ACROSS the SUITE,unsee-able footage,drop frames on outputs( reguardless of WHAT SETTINGS.) and system lock ups. All  codecs are on board ,Our I T staff and production staff are pulling their hair out as one conflict /problem is resolved , another is created somewhere else.
have tired latest  recommended drivers and rolled back  a few. still NO resolution.
THe systm   has,at adobe 's tech recommendations, had adobe cleaner remove ALL and cloud has reinstalled all of the master suite. still no resolution.

This could be a combination of factors or a bad Quadro card of which I would not be surprised. You may want to contact me direct on this one so I can remote in and see what is going on.
Eric
ADK

Similar Messages

  • Power available for GPU/graphics card/Quadro 4000

    I need to upgrade to a Quadro 4000 GPU in order to use DaVinci Resolve on my Mac Pro.  DaVinci needs to graphics cards for full operation: the Quadro to process video and another card to actually run the displays (an Apple 30" Cinema Display and a 21" DVI monitor).
    Any of the decently powerful cards I'm looking at require power from the mainboard -- which has two power outlets.  The Quadro 4000 requires both of them.
    Is there another power source available somewhere inside the computer to run this second graphics card?  Or perhaps someone can suggest a good solid graphics card to run the two displays that does not require power?

    And your Mac running OS X will not accept the Quadro 4000.
    http://store.apple.com/us/product/H3314LL/A
    Same card on Amazon for $790 with MacPro3,1 or later
    http://www.amazon.com/PNY-DisplayPort-Profesional-Graphics-VCQ4000MAC-PB/dp/B004 CRS78O/
    There are some helpful comments there like this one:
    i work in 3D visual effects, post production, and graphics.
    this video card works fantastic under Windows 7. the Windows drivers for the Quadro are finely tuned and allow particular applications to take full advantage of the video card.
    under OS X, the card is NOT worth the premium cost. my ATI 5870 performs better in applications that the Quadro 4000 is suppose to work better with. for the life of me, i can't understand why Nvidia/Apple can't get these drivers right under OS X. its the same story, Quadro release after Quadro release. Nvidia and Apple just don't seem to care. my current 2010 12-core Mac Pro might be my very last Apple desktop. i just can't justify the Apple tax anymore if Apple isn't going to provide basic stuff professionals need. it just seems like Apple is drifting farther and farther away from the professional market.....so disappointing.
    another extremely annoying thing is that i can't have my ATI 5870 and Quadro 4000 running at the same time. the Mac Pro only has two 6-pin power cables!!!! what's with that!! are you kidding me??!!
    So you need to look at a new Mac. Or running Windows. Or... something.
    2008 brought with it EFI64 / UEFI which is what you would need right now. Had you waited back when you did buy your Mac Pro until March 2008.... you would really have been set as far as usiing Quadro or GTX 285 and having 64-bit EFI.  I just think this is another of those times.
    Not everyone is ready to and running Lion, but Lion does have some support for the GTX 580, which is more power.
    http://netkas.org/?p=1059
    http://forum.netkas.org/index.php/topic,979.0.html
    http://forum.netkas.org/index.php/topic,979.15.html
    This: support for GTX cards even in MacPro1,1 if you have 10.7,3
    http://forum.netkas.org/index.php/topic,1897.0.html
    Why wait? Ivy Bridge from Intel in April will and has to arrive someday on Apple's desktop.
    the GTX 680 arrives on 23rd, and AMD has their new line of GPUs, so something there.
    Your GTX 285 no matter what, unless the seller isn't what he/you say they are, should work in Windows, Mac OR PC. I've used GTX 260 in my Mac Pro and in a PC with X58.
    Vendors are coming out with Thunder storage arrays more so now, more for laptops and other systems, but there and using optical.
    Given your needs etc I would find someone that wants your system and PowerPC etc and part with it. If you can't wait, or don't want "1.0" and want solid mature and known hardware, pick up one (you could even get the $2100 2.8 4-core ref'd model and do the W3680  6-core 3.33GHz  $599 yourself.
    www.macperformanceguide.com has a number of tips. The guy is now running 100% SSDs with a pair of PCIe controllers populated with 1TB SSD modules on each, and 48GB RAM. 2010 lets you use 3 x 8 or 16GB RAM also.

  • Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

    great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

    The Yosemite upgrade very often damages existing Photoshop installations.  Thank Apple for that.
    You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
    But first, give us details about your setup:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • After changing my graphic card to an ASUS Strix GT 970, Photoshop CS6 opens the JPG files without show them on the screen

    After changing my graphic card to an ASUS Strix GT 970, Photoshop opens the JPG files without show them on the screen

    Try turning off GPU support in your Photoshop's preferences performance section.  Also check that you have installed the latest device driver installed for your GT 970 adapter and that all CS6 updates are installed... Your CS6 should be version 13.0.1.3....

  • FPS drop in the game Counter strike after updating my graphics card.

    Hi, i just updated my graphic card drivers and after that the fps on a game i like to play dropped to about 5. Before it was 70-100.
    Its just unplayable and i cant figure out what it is, it has to do with the update.
    I tried another game and it floats the same way as before.
    The pc is a HP-Pavilion and the mode name is VN278AA-UUW m9860sc.
    The graphics card im using is ATI radeon HD 4650.
    Any idea what it may be?

    Hi TIMOWN,
    Welcome to the HP Support Forums! 
    I am sorry to hear the your FPS has dropped so low after updating your Graphics card. I will try my best to help you with this. I suspect that you had a bad update and would suggest rolling back the driver to the previous version.
    The steps to rolling back a driver are in this document for Device Manager Information for Windows 8.
    I hope this helps, please let me know how it goes.
    Good luck and have a great day!
    I worked on behalf of HP.

  • How does Photoshop CS6 choose the video card for its Graphics Processor?

    Running a Intel Mac on 10.74 - CS6
    I have two video cards running three Dell Monitors.
    The ATI 5770 (runs the 24") is on the 16 lane PCI slot and the older Nvidea 8800 GT (running two Dell 19") is on the 8 lane slot.
    But photoshop chooses the slower card on the slower lane.
    Any advise welcome to change this.

    It's not really Adobe's fault.
    The simple fact is that most of the software design that supports display processing is still mired in the days where a computer had one monitor.  Making things worse is the fact that the GPU makers don't really have any incentive to make their hardware/software work in a system with other GPU makers' hardware.  In a selfish sense, quite the opposite.  Who's at fault when your ATI and nVidia cards don't work together?
    Macs have just as many problems as PCs - possibly more, since Mac users don't have the luxury of mixing and matching driver versions.
    Many modern video cards are made now to support sometimes up to 4 monitors.
    -Noel

  • Is it possible to upgrade the graphics card with my HP Envy DV7 - 7332EA

    Hi all,
    I was hoping someone on here may be able to answer my question. I recently purchased a refurbished laptop from certain computer retailer, an HP Envy DV7-7332ea, it is an Intel i7, 16GB RAM and was supposed to come with a 2GB Nvidia GT635M. Long story short, said pc retailer did not tell me that the fault/refurbishment was with the graphics card and despite advertising it as being installed with the GT635M, it in fact had a shared Intel graphics card installed. Long story short after some truly horrific customer service - talking to my bedroom wall would have yielded the same level of responses - they have told me that the will not be fitting the correct graphics card - when pressed for an explanation or reason for this they have been unable to give me a technical explanation.
    So, I'm assuming possibly the motherboard has been replaced as well which is preventing the graphics card from being upgraded. Now I realise that there could be numerous reasons this has happened, but I was hoping someone could answer me this.
    Would the artchitecture of my laptop allow for a graphics card upgrade? If the motherboard has problems and these were resolved are the Envy range generally able to be upgraded?
    Thanks guys,

    Hi:
    Unfortunately, the only way to upgrade the graphics adapter is to replace the motherboard with one that has the better nVidia GPU.
    Doing that would cost about as much as buying a new notebook with the graphics solution you wanted in the first place.

  • Help me choose a graphics card.

    Hi everybody!
    I´m in the process of picking parts for a new computer, but I got stuck when it comes to choosing a graphics card.
    I want a hd7850, and the msi brand seems to be a preferred brand when I read many forums.
    But there are currently three different models on the msi website.
    Frozr 3, Frozr 4 PE, & a model advertised with a 9cm pwm fan.
    What i´m looking for is a low noise product, I want my computer to be as quiet as possible.
    So, my question is, which is the quieter card?
    I am also curious to know about the 9cm fan card, who is it targeted at?
    I can´t find any info on it anywhere else on the web, and it does not seem to be for sale anywhere.
    Regards
    Dr.Nick

    hmm, as far as I can see the review only includes the Twin Frozr III and IV (PE) versions but not the R7850-1GD5/OC or R7850-2GD5/OC with 9cm fan Dr.Nick mentioned.
    None the less I'd go with the Power Edition with TF IV (dual 9cm). You can have a read about it >here<.
    This cooler has potential and you can manually control the fans by using MSI Afterburner software to get it even more silent.

  • Power Mac G5 crashes after installing new Graphics Card

    Hello, this is my first post and if anyone can offer any help with my problem I would greatly appreciate it. Sorry for the long description, but I want to get all of the facts out.
    Its a bit convoluted, but here goes...
    I was having a problem with one of my G5 computers and I thought at first that the problem was the graphics card. So I bought an ATI Radeon 9600XT card on eBay. Before that card arrived, I determined that the problem with the computer was a faulty firewire card, I replaced that and this computer now runs fine.
    After the Radeon card was delivered, I put it in another G5 (1.6 processor) being that it was an upgrade from the nVidia GeForce FX 5200 that was already in the computer. After about a week, this computer crashed and crashed repeatedly. So I switched the card back to the original nVidia GeForce FX 5200, but it still kept crashing.
    I then initialized the drive and reinstalled 10.4. This did not solve the problem, the computer keeps crashing with the screen that says "this computer needs to restart..." same as before. I then swapped this nVidia GeForce FX 5200 card with another identical nVidia card that I have from a 3rd G5. This not only did not stop the crashes, but caused this third G5 to crash.
    When I start the G5 1.6 up in safe boot, the computer does not crash and will run stable.
    I really would appreciate any advice.

    Ok I ran AHT on both machines and everything passed on both. The G5 #1 (1.6) restarted and ran ok (in and out of sleep mode) overnight. When I shut down, the screen went dark and all seemed well, but the computer never actually "shut off".
    Anyway I thought that if I could pull the panic logs from each machine that it may be helpful for someone to diagnose just exactly what is going on. So here are the panic logs for each G5.
    G5 #1 (1.6)
    Wed Jan 26 00:01:12 2011
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000A30B0025 PC=0x000000000003FFD4
    Latest crash info for cpu 0:
    Exception state (sv=0x5C3BB780)
    PC=0x0003FFD4; MSR=0x00009030; DAR=0xA30B0025; DSISR=0x00200000; LR=0x0003FFBC; R1=0x4428BA10; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00000003 0x0002BDCC 0x002FC474 0x002FC61C 0x00303E28 0x00303F9C
    0x002DA43C 0x002DA3B4 0x002E9ACC 0x002EB94C 0x0008C248 0x00029234 0x000233F8 0x000ABEAC
    0xA1B1C1D3
    backtrace terminated - frame not mapped or invalid: 0xBFFFE240
    Proceeding back via exception chain:
    Exception state (sv=0x5C3BB780)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x6E264280)
    PC=0x9000AF48; MSR=0x0200F030; DAR=0x02158070; DSISR=0x40000000; LR=0x9000AE9C; R1=0xBFFFE240; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
    Exception state (sv=0x5C3BB780)
    PC=0x0003FFD4; MSR=0x00009030; DAR=0xA30B0025; DSISR=0x00200000; LR=0x0003FFBC; R1=0x4428BA10; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00000003 0x0002BDCC 0x002FC474 0x002FC61C 0x00303E28 0x00303F9C
    0x002DA43C 0x002DA3B4 0x002E9ACC 0x002EB94C 0x0008C248 0x00029234 0x000233F8 0x000ABEAC
    0xA1B1C1D3
    backtrace terminated - frame not mapped or invalid: 0xBFFFE240
    Exception state (sv=0x6E264280)
    PC=0x9000AF48; MSR=0x0200F030; DAR=0x02158070; DSISR=0x40000000; LR=0x9000AE9C; R1=0xBFFFE240; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    G5 #2 (Dual 1.8)
    Wed Feb 2 15:18:00 2011
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000A3010025 PC=0x000000000003FFD4
    Latest crash info for cpu 0:
    Exception state (sv=0x5D0D6280)
    PC=0x0003FFD4; MSR=0x00009030; DAR=0xA3010025; DSISR=0x00200000; LR=0x0003FFBC; R1=0x4521BAD0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00000000 0x0002BDCC 0x002B1B68 0x002BABD8 0x002BAFA4 0x002C25BC
    0x002C268C 0x002EA2C0 0x0008ADB8 0x00029234 0x000233F8 0x000ABEAC 0x2F2F2F2F
    backtrace terminated - frame not mapped or invalid: 0xF007FC50
    Proceeding back via exception chain:
    Exception state (sv=0x5D0D6280)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x5D6F1500)
    PC=0x9000AF48; MSR=0x0000F030; DAR=0x009F5564; DSISR=0x40000000; LR=0x9000AE9C; R1=0xF007FC50; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
    Exception state (sv=0x5D0D6280)
    PC=0x0003FFD4; MSR=0x00009030; DAR=0xA3010025; DSISR=0x00200000; LR=0x0003FFBC; R1=0x4521BAD0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x00000000 0x0002BDCC 0x002B1B68 0x002BABD8 0x002BAFA4 0x002C25BC
    0x002C268C 0x002EA2C0 0x0008ADB8 0x00029234 0x000233F8 0x000ABEAC 0x2F2F2F2F
    backtrace terminated - frame not mapped or invalid: 0xF007FC50
    Exception state (sv=0x5D6F1500)
    PC=0x9000AF48; MSR=0x0000F030; DAR=0x009F5564; DSISR=0x40000000; LR=0x9000AE9C; R1=0xF007FC50; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    Again, I appreciate any advice...hope this will be of help in diagnosing the problem..

  • Qosmio X305 will only boot in safe mode or when the graphics card disabled

    Hi All
    I am having a very concerning issue with my laptop (Toshiba Qosmio X305). It will only boot in safe mode or if I disable the graphics card.
    Awhile back I upgraded the drivers for the nVidia 9800M GTX from the nVidia website, it worked fine for awhile, but then it started crashing randomly by giving me a full screen of random color then switching off. I fixed this by rolling back to the previous version of the drivers (the drivers that came with the laptop software).
    After that it working perfectly for months but yesterday my machine started crashing and I could not get it to boot correctly.
    I have completely deleted (not just a quick format) both the hard drives that came internally in the laptop and I have installed a clean version (the out of the box option) of the x64 Vista that came with the laptop from the recovery disks I created. After I did the install, it boots fine as only the standard VGA device is used, as soon as I installed the driver off the drivers and applications disk it would not boot correctly:
    Just after the status bar comes up and it is about to show the windows logo, just before login, I get a black screen. I can hear that it is booting fine and I can even log in to windows and by memory make things run, but I can't see anything. I then got the latest drivers, again from the nVidia website and they are not helping at all.
    My system is as follows (nothing has been added, its is just how I got it):
    Vista Ultimate x64
    4.00 GB RAM
    Intel Core 2 Quad
    Like I said previously it is a clean install of the operating system, I have not added any programs, except for installing and then updating the display drivers.
    Any help would be much appreciated!

    Hi buddy,
    It seems that this is a typical example, that only pretested display drivers from Toshiba should be used. Why?
    The nVidia drivers are not pretested and they dont have an overheat protection. So for me it sounds like that the nVidia driver has destroyed your graphic card. That means no driver will help you and reinstallation of the whole system too.
    I think the only option is replacing the graphic card. Therefore you should contact an authorized service provider in your country. Here you can search:
    http://www.csd.toshiba.com
    Explain the whole story and then you will see, what the technicians say. If your notebook is under warranty, hopefully this will be covered too. Normally other display drivers you have to install on your own risk
    Good luck! :)

  • Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

  • System only works on first power up after plugging in graphics card

    I have a MSI Lightning R7970 that I purchased new however there's an odd problem with it that the internet does not seem to have answers to. Basically my computer only works for the first time after I plug in my graphics card into my motherboard and it works pretty flawlessly (including gaming for hours) until I shut it down or it goes into sleep mode. After that, the computer cannot power up fully but instead only keeps cycling with the fans turning on 1 second and turning off again. This happens all the time and definitely isn't a seating issue because I've gone through this a lot of times already.
    If I take the graphics card out and instead rely on the motherboard onboard graphics, this issue doesn't occur at all. I've pulled out every other component in the system and spent multiple afternoons trying to find another cause but I can't find anything wrong. Everything in the system is new.
    So should I RMA the graphics card? Or are there other settings I should check?
    My config includes i5-4670k, Asus Z87I-Pro, Silverstone ST70F-ES, Crucial Ballistix DDR3 4GBx2.

    Quote
    first time after I plug in my graphics card into my motherboard and it works pretty flawlessly (including gaming for hours)
    So should I RMA the graphics card?
    no
    Quote
    Or are there other settings I should check?
    My config includes i5-4670k, Asus Z87I-Pro, Silverstone ST70F-ES, Crucial Ballistix DDR3 4GBx2.
    could be anything, BIOS/mainboard issue, PSU issue, ram issue
    some kind of mainboard shorting issue
    to check the video card: test it in another PC

  • 3000 j115 A11 stopped working after installing new graphics card

    I thought i would be slick and install a new graphics card (asus GEForce 8500GT) after i put it in my 3000 j115 A11 everything stopped working. I can turn the tower on and it gives two beeps. Nothing displays on the monitor (it doesn't leave powersaving mode). It is also very quiet like it is not even trying to work. Did I just destroy my computer? Is there anything I can do?
    PS. I did take the asus card back out, so I'm not that lucky
    PSS. Got back to being able to boot but now I can't get back into bios to switch from PCI back to original built in card. If I try it just hangs after pressing enter to interupt normal setup
    Message Edited by Lazlo420 on 06-27-2009 12:05 PM
    Note from Moderator:  Gave it a more descriptive subject.
    Message Edited by JaneL on 06-28-2009 01:36 PM

    I find this thread very interesting. I am assuming this system (3000 j115 A11) is the same as one I mentioned in a post from June 12 (7387A11... Graphics upgradeable?).... and is still hanging out there. Perhaps if Lenovo, or anybody else for that matter, could/would provide SPECIFIC upgrade instructions we could all be enlightened. (In my case I do not own a Lenovo computer but I am hoping to help my sister-in-law with her Lenovo and don't look forward to a major meltdown if the systems are not capable of this, otherwise, simple upgrade.)
    Niether of the 2 previous posters mentioned if they upgraded the PS in thier respective systems prior to the graphics card installation (although ala17 "recently" did.). One had issues and the other didn't. If that should be the first step toward the upgrade, it would be helpful to know beforehand.
    Thanks and good luck. Post back if you get to the bottom of it.

  • Can we upgrade the graphic card on macbook pro 13 inch mid 2012

    I just bought my macbook pro 13 inch mid 2012. I am wondering can i upgrade the graphic card to NVIDIA GeForce GT 650M discrete processor with up to 1GB of video memory?

    Nope - you're stuck with the Intel 4000. If you wanted a higher-performance GPU, you should have bought a 15".
    Sorry,
    Clinton

  • Graphics card Quadro K4200 don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

    I have purchased graphics card Quadro K4200, but graphics card don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

    Did you use the nVidia Hack http://forums.adobe.com/thread/629557

Maybe you are looking for