After clean install snow leopard, cant install bundled application(ilife)?

Hi im new in the world of mac.
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - fail
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?

same "installation failed" message
i had to manually paste this address into safari search bar: "http://support.apple.com/kb/DL1512". i found this link on MacRumors after a a search on google. i could not find it on any search of apple site. (searched for "AppleSoftwareInstallerUpdate.dmg" on apple site and could not find ANY results for it either) i'm new at mac os, so the chaos of [apple support] vs [apple store] vs ["app store"] vs [itunes] download pathways all seem needlessly confusing. using the link above - the download popped up, downloaded, had to restart my second hand 2010 mac mini that i was clean installing original discs - then i was finally able to install "applications install disc" (the 2nd original dvd that came with the mac maini).
was also very confounded that NOWHERE could i actually confirm exactly what applications are on this 2nd disc until i successfully installed it - at least iphoto + imovie + garage band all showed up on the dock. not sure if anything else new is on there - i wasnt watching closely enough. i guess this is "iLife '??". it sure isn't labelled as such ANYWHERE, not on disc, not in manual supplied, not explained anywhere on apple site that i could find. but at least i'm learning to navigate around MacOS a little bit better

Similar Messages

Safari and other aplications super slow after update to Snow Leopard. Installed the update combo and nothing happened, still super super slow. Any tips to solve this?

After updating to Snow Leopard (to install Lion later), Safari and other aplications became super super slow and Preview is not working properly, I can't print anything that was opened with Preview. Already installed the Combo update, nothing happened, Safari still taking hours to load any site. I honestly regret downloading Snow Leopard, the older version worked so much better... Hope Lion is smarter than Snow Leopard...

This may help:
Installing or updating Snow Leopard:
http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf

How do I install Snow Leopard while keeping files, applications, and settings

I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
Install Snow Leopard while keeping files, applications, and settings
If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files. You may have to reinstall some applications, however.
Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c .
The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install.
When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer.
Update your system software to ensure that you have the most recent operating system components. From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
(105428)

When i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

when i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

Ok, it's just a glitch that it's not auto-rebooting from the disk.
Please backup your personal files off the machine to a regualr external drive and disconnect all drives before doing anything
Take the 10.6 disk out and clean and polish the bottom with a very soft clean cloth and a tiny bit of rubbing alcohol to cut the oils.
Stick the disk in and reboot holding c key down, this will make it boot from the disk and you can install Snow Leopard that way.

How can I re-install Snow leopard having installed Lion? The disk supplied states that I cannot use the version of 'Install Mac OS X'...HELP!

How can I re-install Snow leopard having installed Lion? The disk supplied states that I cannot use the version of 'Install Mac OS X'...HELP!

None of the instructions usually given for downgrading seems to mention the fact that you will lose some data in built-in applications, including at least Mail. When you installed Lion, your Mail database was converted from the format used by Snow Leopard's Mail to that used by Lion's Mail. There is no way to reverse that conversion. Therefore, you will lose your entire Mail database. If your messages are all stored on a remote server, that may not be an insurmountable problem, but otherwise you'll have to restore from the last backup you made before the upgrade, and then you'll still lose all changes to the database made since that time.
Another fact not often mentioned is that downgrading is usually the worst possible solution to a problem with Lion. But that's the answer to a question you didn't ask.

I have new hard drive, should I use migration assistant before I install Snow Leopard or install Snow Leopard first?

I just had a new hard drive installed after a hard drive failure. I need to install Snow Leopard, Lion and VMware Fusion. Should I use migration assistant to reinstall my old files and applications first or should I install the new Operating Systems first? Some of the old files do have corrupt data and I will have to pick and choose what back-up files I re-install.

Pondini wrote:
memalyn wrote:
Some files were backed up on another external drive but not all.
How was that done? Drag & drop? An app like CarbonCopyCloner or SuperDuper?
Initially files were backed up on the iMac with Time Machine. I purchased a My Book external hard drive and after doing a full back up on it, I began doing all of my incremental back ups on it using Time Machine. Sometime later, I purchased a Western Digital external hard drive that included back up software on it called "WD Back-up" so I could use it to store all of my Music and Audiobooks on to keep my iMac and My Book free of those file types. The WD Backup software allowed me to pick and choose what files I wanted to back-up. I don't think I had been backing up Music and Audiobooks on the Mac anyway or maybe I was, I don't remember if I can selectively pick and choose files with Time Machine - I have not checked as I have not yet plugged it into my new hard drive. Once The My Book drive became full with regular back ups, around June or so I had to switch over to the WD Back up drive. I recall that I was very concerned that I could not do a full back up on the WD drive because if I did, I would have to reformat the drive and I did not want to do that, so I think I was able to selectively back up some additional files from my iMac but again, I do not know for sure since I have not looked at what is on the drive. I do know that if I was able to back up additional files I had to do it with WD Back up and not Time Machine, if that matters.
I know that the files in the partitioned drive and files associated with VMware Fusion are damaged. If I do a full restore, it will restore the VMware Fusion app and partioned drive
We need some clarification:
Do you mean there were 2 partitions on your internal HD? If so, how was the second one formatted? Was it backed-up?
No, there was only one partitioned drive. The way I understand it is the VMware Fusion software does the partitioning and the app resides on the Mac. After that was done, I then installed the Windows software on the partitioned drive. There is a critical file on the Mac under a Folder called Virtual Machines and in the Virtual Machines folder, the "Windows Bundle" or some such thing keeps locking each time the software crashes due to the problem files somewhere within the files in the VMware Fusion software that (I think resides) in the Windows environment that I cannot access. The Virtual Machine file on the Mac gets backed up so the Windows Bundles files get backed up and that includes all the screen shots (essentially backups) of the Windows environment. The Windows environment includes some of the apps and their data in Windows such as Quicken. Theoretically, the partitioned drive does not get backed up but in reality if the screen shots do, some of the partitioned drive does - corrupt or not. If you have a Quicken file open and a drop down screen in Quicken frozen when the system crashes, that is what gets backed up and there is no way you can get back into Windows or Quicken.
               If I do a full restore, it will restore the VMware Fusion app
If you restore an OSX volume, yes, that will restore all apps, but that's not necessarily bad. If necessary or desired, you can always delete or reinstall a suspect app. That way, all your other apps will be ok. For most users, reinstalling all apps is a considerable project. See Transferring Applications for an explanation.
Well, that is true. To reinstall VMware Fusion, Windows and Quicken would much, much easier than all of the Mac software I have. Plus, the VMware Fusion version I have is not compatible with Lion and my goal is to install Lion, so I will have to upgrade VMware Fusion no matter what. Further, I'm so aggravated with the dual operating system, I've been looking at products to replace Quicken, so if anyone knows of a good home, small business and home rental financial product they can recommend, I'm all ears!
               If I do a full restore, it will restore . . . and partioned drive
If there are 2 partitons, a full restore only restores the OSX partition. If a non-OSX partition was backed-up, it must be restored separately.
               Now that I've said I only have 1 partitioned drive, does that mean it will restore the partitioned drive? I would prefer it did not. It seems now that it would be much cleaner to restore the OSX drive. Would I be able to do that?
So, depending on the exact circumstances, your best be may be to restore the most recent OSX partition, then restore/copy those files that were backed-up on another drive; reinstall VMware if necessary; restore the other partition.
So . . . things may be a bit more complex than we though, but perhaps less dire.
More detail on the various partitions and backups should clarify things.

Blue Screen after clean reinstall snow leopard

I have a mid 2011 that came with Snow Leopard and disks. I upgraded from there to Lion - then whatever came next and to Mavericks and finally Yosemite, which was a nightmare for me. I did not use disks of any of the rest. So I just decided to take my disks and go back to Snow Leopard. I did this and it asked to go to disk utility and repair both the HD and Permissions. It came out ok, but there was an instance where looking at the list in HD repair, I saw Suid File System Library Core was moved and cannot be repaired. I went ahead and erased the Hard Drive. Then closed out and installed Snow Leopard. I'm not sure I did it right because I had to rename the new start up disk and typed in unnamed 1.
after that I was able to start up to Snow Leopard. It worked fine until I tried to download all the updates. Then it didn't seem to restart, but just went to the sign in screen. So I had to keep shutting down and turning it back on. No updates. One of times I started up, I got the blue screen after the apple and gray screen.
Also on start up the apple comes up without the chime. Last night I got some instructions from a similar situation and tried to use my disk to a clean reinstall all over. It didn't work, still the blue screen. (it does fine in safemode.)
I need help to get this mac running. If someone can help me......

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

After upgrading to Snow Leopard, Cant log in to home folder

After installing the Mac OS X Snow Leopard, I attempted to log in to my account. After typing in my password, I received a message stating: "Your home folder, which is protected by FileVault, didn't open. It needs to be repaired. To open the folder and continue logging in, click OK. To log in as a different user click cancel log in".
When I click "OK" I receive a message stating: You are unable to log in to the user account "(username)" at this time because an error occurred.
Other accounts on this computer open with no problems. Why is it just my account and is there any way to repair this folder?

You probably have a damaged (physically or in software) hard drive. Sounds to me like the latter, and more specifically that your user account has been corrupted. You can [repair the hard drive with Disk Utility|http://support.apple.com/kb/TS1417], but that may not fix the problem if even one bit has been twiddled in the massive encrypted file that your user account is stored in when using File Vault. Very small amounts of damage can permanently destroy any encrypted file.
Do you have backups? If so, you should restore your account from a backup from before the problem first started. If you don't have backups, you don't even have the options to recover your data that you would have had without File Vault enabled.

Can I partition a soon to be received iMac 27" 3.4 Ghz i7 Quad core running Lion and install Snow Leopard to run old applications

I am about to get a 27" iMac 3.4 Ghz i7 Quad Core with Lion installed.
I want to run one or two old applications that will not run under Lion.
Is it possible to partition the iMac to run Snow Lepoard from there when I need it ?

I have tried to partition my Macbook Air (running Lion) using Bootcamp but all it will let me do is install Windows (which I do nor want to do.) Otherwise it will not partition the HD.
It gives three options. 1. Create a Windows 7 install disc. 2. Download the Windows support software. 3. Install Windows 7.
For interest I ran Bootcamp on my iMac (running Snow Leopard) and that would allow me just to partition the drive
(with no need to install Windows) by checking "I have the Mac OS X installation diec... or I have the support software.." (which I don't) and then goes to the partitioning page.
If you can put me wise I wouldbe grateful.
Cheers
Roger.

Cant upgrade after install snow leopard

After I installed Snow Leopard 10.6 everithing looks well but when I tried to update to 10.6.1 it does not work. I tried manual instalation dowloading from site. Install of update starts and go until I push the "install" boton nothing happens. I tried with roseta and optional content on CD but it happened again.
It seen's that I cant install anything new.
Please help,
Thanks
Roberson

OK ! It worked but...
Now I have problems with brasillian portuguese caracters (it's my language...)
If I install the file again it works but the installation problem cames back. So for now my solution is to erase the file every time I want to use new software.
Thank you for your help!

I want to save important files/programs on an external hard drive, delete EVERYTHING on my computer, install snow leopard, and reload everything i saved on to a clean slate. Is this possible/practical?

I was just thinking that it would be better to wipe the entire hard drive clean and reinstall some programs rather than go through and move certain things to the trash. Basically rebuild my software and file collection from the ground up, omitting what is unnecessary. Then again, I have no idea what i'm doing.
My macbook was purchased in late 2008. 2gb RAM. OS X 10.5.6. It's been going very slow lately so i decided i would look up how to improve. Snow leopard was recommended as well as changing my RAM. And so here I am.
I don't have an external hard drive so i was going to just compress all my files and save them to my emac via ethernet. would they be harmed?
also, i have alot of projects in ableton (a music recording/writing program). Would saving and transferring them be just as simple as finding the song? or are other components of a certain song saved in other locations?
sorry this is so lengthy. i should probably stick with something simple but i just want things to run as smoothly as possible for as long as possible
thanks very much

Here's some info that may be helpful.
Installing Snow Leopard: What you need to know
http://www.macworld.com/article/1142454/install_snow_leopard.html.
You should get a Firewire connected hard drive and backup your MB's HD to it. That way, if something goes wrong during the installation, you can recover your current sytem, apps and files. After the SL install, you can use the external HD for frequent backups.
 Cheers, Tom

Can't install snow leopard on partition after upgrading to lion

I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps. As I was reading on the web and Apple Support, I have tried various things and get a window saying that I can't install snow leopard.
I have never partition my hard drive, but using disk utility I created a partition called "Snow Leopard." It divided my HD in half which is okay. I closed the disk utility window, rebooted holding down the "C" key, and saw the OS X Install DVD. When I select it a window pops up saying, "You can't use this version of the appl inst Mac OS X with this version of Mac OS X. You have installed Mac OS X 23.1.1."
Before downloading lion, I made a backup of my existing HD using Time Machine to an external HD. When I open up a saved version dated a month ago, I see that the applications that were working in snow leopard now have the icon circle saying that it is not supported by lion. This is strange since I used Time Machine to back up my HD, then turned off the app before downloading lion. Even older versions saved on the external HD show the circle.
I read about lion and the "Recovery HD," but when I hold down the Command-R key nothing happens when I restart my computer. It also talks about using the option key but that does not work. It talks about reinstalling lion using this system, but I don't see it working.
How can I install snow leopard on my new partition, then I would go to "Software Updates," to get the latest version, or use one of the versions on my external HD to have both operating system.
Thanks,
DaisyMay

Hi Scottiemn,
As I was trying different things to make a partition on my HD, I made notes as to what I did, and I finally got it to work. I will try to explain what I did.
Before installing “Lion,” I backed up Snow Leopard using Time Machine to my external Seagate HD. I installed “Lion,” and found out that I could not use some of my old apps, so I did the following.
Since I am running “Lion,” I opened up disk utility and selected my MacHD (1TB), then I selected partition, and it showed “Macintosh HD” under the partition information name. I believe I selected the plus, + and it divided my HD space in half, and I named it Snow Leopard.
I then installed the Snow Leopard DVD, and restarted my computer holding down the “C” key, I held it down for about 30 seconds or more and then took my finger off of the key. As I waited I finally saw that I was on the install DVD, and on the top menu bar I saw “Utilities.” I had my external Seagate HD mounted on my desk top before I restarted my computer, I selected the “Utilities,” on the menu bar and it gave me the option to back up from Time Machine, I selected my external Seagate HD to the newly created partition I named Snow Leopard and I said “Yes.” I followed the instructions and after it was done, I went to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with Snow Leopard. On my desktop, I can see two Hard Drives, one is Macintosh HD with “Lion,” and the other is Snow Leopard.
Then, I started up my computer and I was on the Snow Leopard partition and I saw all of my apps working. I then went back to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with “Lion,” and restarted my computer and I was running “Lion.”
I am not sure why I was not able to use the DVD of SL before, but somehow I got it to work, and I hope that I have explained what I did above.
One thing, when I installed “Lion,” from the app store, I did not make a bootable DVD of the application. I went back to the app store and downloaded “Lion” again and kept it in the dock until I got Snow Leopard to work. I burned a DVD of “Lion,” and so I have a backup of it.
Since my Seagate HD has only 250 GB of space and it is an EIDE HD 7,200 rpm using an OWC Mercury Elite FW400/USB2 with the Oxford chipset 911 enclosure which I bought in 2008, I decided that since I now have my 27 inch iMac quad core i5 with 1TB that I needed a larger hard drive.
I researched the web and decided to go back to OWC and just bought a 2.0TB OWC Mercury Elite Pro “Quad Interface” 64MB with eSATA/FW800/FW400/USB2.0 with 7,200 rpm speed for $219.00. I partitioned it for Time Machine, and Carbon Copy Cloner.
I ran Time Machine, and both partitions “Lion, and Snow Leopard” are on the Time Machine partition and both HD’s are under the Carbon Copy Cloner.
I am self taught on my many iMac’s over the years, and I go to the forums to ask questions and follow the helpful hints to resolve my problems. I carefully try different things and write down what I did so I don’t repeat things.
I hope that I have explained what I did, and hopefully it will work for you.
When I want to run SL, I select in the System Preferences to start up from that disk, when I want to run Lion, I go back and select that and start up my computer running Lion.
Since I have many old apps that Rosetta uses to open them up in SL I wanted to keep that operating system. I will go back now that I have everything working and see if I really need them. I won’t rush to remove my SL partition that I created, but in time if I don’t need the older apps then I may clean out my system and just run Lion.
I run Lion now all of the time, but when I need to go back to SL, I now have the option.
Good Luck,
DaisyMay

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

Can't open Word or Quark Xrpress after installing Snow Leopard 10.6.8

A few days ago (30th jan), I Installed Snow Leopard 10.6.3 & then it updated to 10.6.8. When I tried to open Word 10.1.0 (2002 version) it opens a blank page but doesn't allow me to save it. If I open an exisiting file Word shuts down. Ssame with Quark Xpress 6.50...

Security Update 2012-001 Bricks Rosetta programs
Restore method.
#1 Backup your personal data off the machine.
Backup files off the computer (not TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. That's all you need to do at this time, disconnect all drives now to prevent mistakes.
#2 Try Restoring from a TimeMachine or option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
#3 Reinstall OS X 10.6 from disk
If no TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility to >Repair Disk and Permissions (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: If Disk Repair gives a error that is not repaired, then you have to consider erasing the drive (with Zeros) and try reinstalling 10.6 fresh or replacing the drive.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If you get gray screen at any time when booting (possible it might occur when you reinstall old programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
Further Reading below:
#6 Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone here
http://www.bombich.com/get_ready_for_lion.html
TM help here
http://pondini.org/OSX/Home.html
#7 Make copies of your original Snow Leopard
Learn how to make copies of your 10.6 disks here
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
#8 Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible with Lion
http://roaringapps.com/apps:table
#9 Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
https://support.apple.com/kb/TS2570
If at any time you feel this is beyond your capability, please seek local professional assistance before you lose your data.
If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good luck
<Edited by Host>

MacBook Pro (Early 2008) battery health drop after installing Snow Leopard?

I installed Snow Leopard last Friday, when after the installation, I clicked my battery icon as I was looking through the new OS- and noticed that it said "Service Battery" which I hadn't seen before. So I looked in System Profiler and noticed that the maximum charge was around 3400mAh, quite a bit lower than the 5400mAh that it started with 14 months ago. So thinking that it might just be displaying incorrectly, I did a battery calibration (it was about that time anyway) as per the instructions on http://support.apple.com/kb/HT1490 and when I plugged it back in after letting it sit in sleep for five hours, it shows 2848mAh as the maximum charge. There is no way that it would have lost ~600mAh worth of charge capacity through one calibration. The battery only has 198 cycles on it, and it states on http://www.apple.com/batteries/notebooks.html that the battery is designed to have 80% charge capacity at 300 cycles. Has anyone else had this problem? Is there any way to improve battery health, short of buying a new one? Or does Apple cover batteries in cases like this?
edit- I just noticed I posted this in the wrong MBP battery forum, but can't find a way to move it or delete it- sorry about that!
Message was edited by: david.moore

I installed Snow Leopard as well (made a clean install) and got the same message "check the battery". I followed the procedure on http://support.apple.com/kb/HT1490, since I had the same problem (my battery capacity was significantly low compared to the cycles, I had ~2800 mAh (60%) for only 60 cycles) and when I rebooted the computer, it even dropped down to ~2095 mAh (40%) !! *So the good advice is to _NOT follow HT1490_ advice...*
I tried as well http://support.apple.com/kb/HT1411 but it didn't helped...
I guess I'll have to take a meeting at Genius Bar to the closest Apple store... Did anyone got his battery replaced ? I think this is one serious issue where Apple should either :
1. Remove this bad advice's page and warn users against it
2. Upgrade the battery's firmware (is there any?) or OS battery life detection
Anyway it's very annoying that when doing a "recommended" manipulation, it even makes the problem worse !!

After clean install snow leopard, cant install bundled application(ilife)?

Similar Messages

Maybe you are looking for