After clean reinstall from Time Machine, iPhoto says: "photo library needs to be upgraded"

My iMac was reset to factory settings after the 1 TB HDD recall (replaced HDD).  I restored practically everything from Time Machine prior to the HDD replacement.  The only surprise so far is that when I start iPhoto for the first time, it says: "The photo library needs to be upgraded to work with this version of iPhoto.".  Of course I don't want it to corrupt all the photos and videos I have stored in there prior to the HDD replacement.  Should I click on "upgrade"?  Why is this showing up?  Nothing should have changed between before and after ...?

Well, that explains why it needs to upgrade the iPhoto Library, because your Mac now has version 9.2.3 whereas before it has 8.1.2.
I always like to understand what is going on before proceeding. I am guessing that Apple "restored" the 10.6.8 system but must have delivered it back to you with more recent versions of some apps like iPhoto (they probably don't keep all the old versions of those apps for these restores). I also believe that Time Machine usually does not replace a newer version of an Apple program (like iPhoto, Safari, Mail, etc.) when it is restoring like this. So I THINK this all makes sense.
So what I would do here is make a copy of your iPhoto Library (in case you don't like the results of what happens next), and then say "yes" when it asks to upgrade the iPhoto library to be used with the new version 9.2.3. The only reason this updating could go wrong is that there is some problem inside your database already, otherwise it should work fine. (I've upgraded through about ~ 4 versions of iPhoto over the past several years and have never had a problem with this step).
If you run into a problem after saying "yes," then you have your old Library still (the copy you'll have made) and can take steps to rebuid or repair it with a number of different tools before trying again.

Similar Messages

  • Flash won't open (unexpected quit) after system reinstall from Time Machine

    After purchasing a new machine, I reinstalled everything from my Time Machine backup, including all applications. Now Flash CS4 gives me "unexpected quits" every time I try to open it. Flash CS3 opens though. I deleted the prefs file and it still won't open.

    I have/had a similiar problem. What I did was reset the SMC and PRAM.  You can also do a safe boot. For the PRAM, I had to do three times, and my computer finally booted up. Afterwards I verified my disk and repaired my permissions. So far so good. I guessing that Spotlight needed to re-index the system.
    http://support.apple.com/kb/ts2570

  • After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

    After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all  my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

    Try these for the first attempt:
    First be sure to have a backup copy of the library if you already don't have one.
    OT

  • Error 150:30 after restoring CS4 from Time Machine backup

    I just got myself a new Imac with OS X Maverick and set it up using a time-machine-backup. My Adobe CS4 now has a Problem with the license and shows me error: 150:30?
    Do I need to uninstall CS4 and reinstall? Is there any easier solution to this problem?
    Thank you anyone for some help.
    chris

    Thanks a lot for your help......everything back to normal after reeinstallation.
    chris
    Am 29.09.2014 um 23:28 schrieb John Waller <[email protected]>:
    Error 150:30 after restoring CS4 from Time Machine backup
    created by John Waller in Adobe Creative Cloud - View the full discussion
    Do I need to uninstall CS4 and reinstall?
    Unfortunately yes.
    Also run the Cleaner Tool prior to reinstalling
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Restoring from Time Machine backups invariably breaks the activation mechanism (Error 150:30) and there's no easy way to fix a 150:30 error other than via re-installing.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6775090#6775090
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • ITunes library disappeared and cannot reinstall from Time Machine

    I have searched all support threads for my problem -- updated to Mavericks and all my playlists disappeared and audio files that the new itunes didn't seem to know what to do with (meditation i.e.) I've tried to reinstall from Time Machine, but all support threads refer to itunes library and folder which I don't have anymore. I drag it to the desktop and tried to reload from there. I tried to do it directly from TM but get the error message that says something about a file instead of a folder.
    Has anyone else had this

    This is what things should look like:
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847
    Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605

  • HT4399 Address book reinstall from Time Machine help?

    I just did a master erase on my MacBook Air 2010.  Genius bar helped me.  The only thing that didn't get reinstalled from Time Machine was my address book. How do I get my contacts back?  Please help!

    Try this:
    Open address book and then launch Time Machine (making sure Address Book is still the active window). You should be able to navigate through time IN the address book window and once you find the correct time there will be an option that says "Restore All".

  • Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file hav

    Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file have gone. Need to free up the space that the ghost file take up so I can drag drop from ex drive onto harddrive

    Here's the scoop, new friend.....
    When you boot into Time Machine you'll get the same OS X Utilities screen as you would if you booted into the Recovery HD. So, from there go into Disk Utilities to erase/format your internal drive. After that's done, back out to the OS X Utilities screen and select the restore option. Just follow the prompts to select the TM back up date you want to restore from and where to restore it to. Pretty straight forward.

  • Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY  . Looking for solution.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • After restore backup from time machine, all thumbnails in photos are blank. How to fix ?

    After restore backup from time machine, all thumbnails in photos are blank. How to fix ?
    I'm using Yosemite 10.10.3 and Photos. i have tried repair database, but no success .

    Try these for the first attempt:
    First be sure to have a backup copy of the library if you already don't have one.
    OT

  • I get a message that my photo library needs to be upgraded and my photo library will not be readable by previous versions of iphoto after the upgrade.  I don't dare do anything.  Please help

    I keep getting a message when I try to open iphoto that says that my photo library needs to be upgraded and my library will not be readable by previous versions of iphoto after the upgrade.  What do I do??

    Depends - you first off need to suypply us with information since we only know what you tell us
    Like what version of iPhoto are you using? Have you recently installed any iPhoto (or iLife) updates or upgrades? Do you plan to use this iPhoto library with two or more different versions of iPhoto (no possible so stop now if you do)? Where is your iPhoto library?
    Anything else that you can tell us that might let us give you a good answer to your question
    LN

  • IPhoto keeps saying The photo library needs to be upgraded to work with this version of iPhoto

    Upgraded to new Lion iMac from Snow Leopard iMac, then upgraded to iCloud. I upgraded to the latest version of iPhoto. I get this message that says that "The photo library needs to be upgraded to work with this version of iPhoto. I have iPhoto '11 version 9.2.1(628)
    I have attached the screenshot here. I have over 31,000 photos in this library. I click upgrade and it shows me a line for a while and then goes to the photos. Everything looks fine except photstream doesn't work and I always get this same message when I open iPhoto again.
    Another detail is that I do have mobileme web albums still publishing from this iPhoto. Could this be causing a problem?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • My iphoto on my imac somehow updated on its own and now its saying "The photo library needs to be upgraded to work with this version of iPhoto." have i lost my photos?

    I tried to open my iphoto last night on my iMAC and it somehow updated on it's own and now has a message saying  "The photo library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade.The upgrade process for very large libraries may take an hour or more to complete." I only have the option to quit or upgrade. What does this mean? Have i lost my pictures? i don't properly have my back up hard drive set up so all my pictures aren't backed up.

    "The photo library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade.The upgrade process for very large libraries may take an hour or more to complete."
    After your iPhoto application got updated to a new version, iPhoto will convert the iPhoto library to a new format, that is used by the new version. The warning tells you, that after this upgrade older iPhoto versions will no longer be able to read the iPhoto library. If you have a second Mac with older software that might be important. Make a backup to be on the safe side and let iPhoto upgrade the library.

  • When trying to open iPhoto the computer says: 'The photo library needs to be upgraded to work with this version of iPhoto.'  So I click 'upgrade' Then it says: 'You can't open your current photo library using this version of iPhoto.' Etcetera...

    When trying to open iPhoto the computer says:
    ‘The photo library needs to be upgraded to work with this version of iPhoto.’
    So I click ‘upgrade’
    Then it says: ‘You can’t open your current photo library using this version of iPhoto.’
    Etcetera...
    What to do??
    Theo

    Is your Apple Intel-based, poppelmacbook?  If not, you should consider treating yourself to a new Mac. Last December I gave up my old because it just could not update...anything because it was not Intel-based.  Updating everything on this OS to 10.9 has been confusing for me, but I just could not work with that old Mac because the updates were too smart? for my 10.6.  It is upstairs now...for visiting family:  games, garage band, etc.--things I never did use.  Apple refurbished and purchase the extended warranty.  Apple loyalist since late 1980's.

  • The photo library needs to be upgraded to work with this version of iPhoto??

    Just got this message after upgrading to Mavericks...
    The photo library needs to be upgraded to work with this version of iPhoto.
    Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
    Is is ok to go ahead with this?
    I have done a back up to my time machine but I am concerned when it says the library will not be readable by previous versions, what happens if I have to restore my Mac from the time machine, which would mean reverting back to Snow Leopard?

    Well you have two choices - upgrade the iPhoto library and use it - or not upgreade it and stop using - the current version can not use older libraries so unless you upgrade the library to match the application version you can not use iPhoto
    And as warned once you upgrade the libary then older versions will not be able to use it
    LN

  • When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto."  Whether I hit Quit or Upgrade the problem is not fixed.  Any suggestions?  Yes, I have tried Command Option iPhoto..no luck.

    When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto."  Whether I hit Quit or Upgrade the problem is not fixed.  Any suggestions?  Yes, I have tried Command Option iPhoto..no luck.  I think I may have hit Upgrade the first time.  I really need this to be fixed ASAP.  Thanks for your help.

    Assuming iPhoto 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

Maybe you are looking for

  • Copy paste problems - bootcamp

    The copy and paste functions don't seem to be working in dreamweaver 8 in bootcamp ... does anyone have a solution to this? I have tried deleting this file "WinFileCache-7A9586CB" as discussed in another thread ... but this made no difference. thanks

  • Static function issue?

    hi, i am having a static function which fetch some values from data base and put it to an arraylist and return this array list. some times the returned array list empty even though values are exists in db,all the varibles used in this static function

  • Screen error in tabstrip control

    hi all, I'm practicing a program for Tabstrip control. it will be like this tab1           tab2 number1    result number2 number1 number2 result are of integer data types. now the problem is the program is giving result when I declare the above varia

  • Copy / paste operations crash all SGD windows

    Hi From time to time, users have problems during copy/paste operations between SGD windows. When users use this function between (for ex.) gterm and x-emacs v2.22 windows, all SGD windows crash. The support asked them to migrate to the new SGD versio

  • Playing subtitles in a Quick Time Movie.

    Hi, I have recently installed perian on to my MacBook Pro as I want to play .srt files (subtitles) while the movie was playing. Problem is that I cannot seem to get ot to work. can anyone please suggest a reason why it won't work or how to make it wo