After cleaning my music, how do I update the tags in the songs?

I have cleaned the music in my itunes. Since I have a lot of music (>1000 albums) it has taken me weeks to get a good result.
In a next step, i want to update the tags of the mp3 songs that are stored on my nas. I want to write the changes made in itunes into each of the songs on the nas.
Is this possible, what steps do I have to follow?
I may have 95% mp3 songs, some aren't...

The best way is to connect it to the computer you normally use to sync it.
Never synced it? You should. This is the only way to ensure it is properly backed up before upgrading iOS.
iOS: How to back up:
http://support.apple.com/kb/HT1766
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623

Similar Messages

How do you update the song/artist information on songs that you have loaded to the cloud. Some are not displaying correctly on my Iphone.

I have loaded all my music to the cloud from my hard drive. When I am viewing the music on my PC from the cloud it wasn't displaying all of the song/artist information correctly. I took the time to go into each one that wasn't displaying correctly using the "get info" option and I updated them all. Now they are displaying properly on my PC but not on my Iphone. I'm sure it was because of the way they were loaded. My question is how do I update the information for the music that is on the cloud so it will display to my Iphone correctly (and the Ipad I just bought but haven't setup yet?

Pretty sure I just downloaded the .exe files to the SD card (I have a directory called "drivers" there & ran from Windows, no need to boot from anything else. Didn't even need to use Safe Boot. The files do need an .exe extension IE someimes downloads as _exe. No idea why but would just need to rename if download has the underscore and not the period. The you can run them.
Was so easy I really did not think about it. One of the Intel Platform drives does say "requires 1.60 update" so that is the one you need. Do the 1.60, reboot, and then the Intel update.
Key point is the release note on the Intel Platform Installer
"Release Notes
1.Please install the Windows BIOS version 1.60 or higher for Encore WT8-A (PDW09x) before installing this Intel Platform Installer update." note this says "BIOS" and not "USB BIOS" which is a smaller file.

I had to take my cmputer back to factory settings and lost my music.How do I get the songs that I have already purchased back?

I had to take my computer back to factory settings and I lost my music.How do I get my music that I previously back on Itunes?

It has always been very basic to always maintain a backup copy of your computer files/docs/pics/music/etc.
Certainly you did not restore your computer without making sure that your backup copy was up to date.
If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod: File>Transfer Purchases

How do I update the music in my iTunes account to my wife's on the same computer

How do I update the music in my iTunes account to my wife's itunes acc on the same computer?

iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iTunes: Setting up Home Sharing on your computer - http://support.apple.com/kb/HT4620
Understanding Home Sharing - http://support.apple.com/kb/HT3819
iTunes Home Sharing now works between users on same computer - https://discussions.apple.com/thread/3865597

I updated my iPod and it erased everything i had on it. How do i retrieve the songs that i bought from the iTunes store? when i try to download/buy them again they tell me i have already purchased them do i want to buy them again?

I updated my iPod and it erased everything i had on it. How do i retrieve the songs that i bought from the iTunes store? when i try to download/buy them again they tell me i have already purchased them do i want to buy them again? I have authorized my computer but none of them are in my music now.

You buy one and only one download.
It is your responsibility to move/copy/backup your music.
Certainly you did not update your ipod without making sure that you had transferred anything purchased on the ipod to your computer and included it in your regular backup copy of your computer.

Family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment

family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment details to enable my wife to download

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

How we can update the time profile ?

Hello,
How we can update the time profile daily in PP/DS ?
This time profile we need in the background job scheduling.
Please suggest

Hi Sunil,
The Time Profile is first to be maintained by going to the current settings (S_AP9_75000087) and creating one Time Profile as per your requirements.Here you define the Display Period and Planning Periods. If you create Relative days/weeks/ months then it is calculated in relation to the current date.So for example if you want to view 10 weeks in past and 20 weeks in future from today, you give the Start Date as -10 and End date as +20.after selecting Relative month/week/day in the Daye column.
Similar method is used for both the Display Period and Planning Period. Preferably ristrict the Display period.
You also have the option of Absolute time where you enter the start date and the finish date as an absolute value in the set period type.This will hard code the dates for you.
This Profile which you have created needs to be attached to Detailed Scheduling Planning Board - View 1/2/3 which ever you want to use by going to the Profile icon on the top and in the pop up click on the More profiles Tab and putting this value in the Time Profile Box.
Thanks,
Harsh

How Can I Update the coils on Quantum PLC...

Dear Sir,
I am in the process of configuring Lookout4.5 build9 with Quantum PLC.
I am trying to write two O/p coils of the PLC using two latchgate
objects. I am using two different set of push buttons for latching
and unlatching the two latchgates. After this I have directly
connected the two latchgates to the O/P coils of Modbus object
in modbus ethernet mode of communication.
Now I am using the PLC simulator s/w of PLC to watch the status.
When I start the first pump (coil1) and Stop the second(coil2),
after sometime it is seen that the position is reversed such
that the coil1 is off and coil2 is On. Though here in Lookout
I see that the latchgate 1 is ON and latchgate2 is OFF.
I am
unable to understand this change over in the status of the coil.
I have read one of the documents on NI website (Document ID:15QA2P9C
"Why can't I update the coils on Quantum PLC without reading them
back in?" Report dated:01/27/98). I think my problem is similar
to that.
So please tell me a proper method of updating the coils on Quantum
PLC or how can I update the coils by reading them back ?
OR is there any problem regarding the modbus.cbx file, if so please
send me the latest modbus.cbx for Lookout4.5
Waiting for your earliest response...
Yours Truly,
Girish Nalgirkar
Theta Controls
Pune, India.

The KnowledgeBase that you refered to is 3-1/2 years old, and the problem in the modbus driver is long-since fixed. Their are no other known issues with the Modbus driver.
The method you are using to update the coil sounds appropriate. What I would first verify is that Lookout is not sending a command to toggle the coil.
1) Write the simplest possible process that shows the problem (ie 2 pushbuttons, the modbus object, 1 latchgate).
2) Create a "modbus.ini" file in your Lookout directory. Place the following in the modbus.ini file:
[ethernet]
DiagnosticPath=c:\
3) Run your program until the problem occurs. If it does, find the "modbus1" file created in the C:\ directory. This file contains a log of all modbus communication that moved back and forth. Check the
log to see if Lookout sent a command to the PLC. If no command was sent, then the change occurred internal to the PLC software.
Regards,
Greg Caesar
National Instruments,
Applications Engineer

If record is in application server how do u update the single table

hi
could anybody tel me
if record is in application server how do u update the single table
by using direct input method

If your Flash player/plugin is older, the only way is to go to Adobe's site (use Limnos' link) and download the full installer. A .DMG file, which you doubleclick to have it mount on the desktop. Inside is the Flash installer app you doubleclick to run and have it upgrade all. Will need an Admin user account.
After you've upgraded to the latest & greatest, currently 11.5.502.110, a Flash perfpane will show up in System Preferences, where you can set it to auto-update itself, warn you of new updates or manually check for same.

SPD 2013 - Copy Document action - how do you update the copied list item's metadata?

SharePoint 2013 Designer no longer has the Copy List Item Action, it only has a Copy Document action. It seems that this action provides no way of saving the copied documents list item ID. How do you update the list item after it has been copied??
Any help is appreciated.
Greg Pierson

Hi,
According to your post, my understanding is that you wanted to copy the list item in SharePoint 2013.
The Copy List Item is
available only on the SharePoint 2010 Workflow platform, you can create a SharePoint 2010 workflow using the SharePoint 2010 workflow platform to achieve it.
You can also use the Content and Structure to copy the list items: Site Settings->Site Administration->Content and Structure.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How do you update the Bios safely when using onboard RAID mirror? Z87-G45

How do you update the Bios safely when using onboard RAID with Z87-G45? I'm using a simple two drive, RAID 1 mirror setup.
I'm currently at bios 1.4, and want to move up. However, last time I upgraded the BIOS, the machine rebooted with improper settings for the RAID (they get hosed during BIOS flash) and Windows decided to auto-repair the only boot drive it could see, one half of the mirror, because it couldn't see the RAID array correctly and *POOF* bare-metal reinstall required.
My PC will not let me press the DEL key on bootup to access the bios, even with MSI Fast Boot not installed. It just ignores the DEL key and tries to load windows which, if that happens, will flame-out my RAID array after a bios flash if I can't catch it to enable the RAID first before windows loads.
I do not want to rebuild my PC again simply because I do a BIOS update.

FYI: BIOS 1.4 & 1.8 are using the same RAID version: 12.7.0.1936
based on this RAID surprise should not hapends.
But as pandaz says if you have no issues, leave bios update alone.
there are still risks something to messed up,
best do a backup of your data just in case if you want to try latest version

How do I update the software on my Airport Express?

Hello everyone,
I have an Airport Extreme base station acting as WDS and an Airport Express station. I recently upgraded the security on the Airport Extreme base station from 128-WEP to WPA (Personal), but I don't know whether I have to do something to the Airport Express base station. It's green light is on. Do I need to do something? Also, how do I update the software in the Express? Whenever I open the Airport Admin Utility, the only thing that comes up on a scan is my Extreme base station. Any advice would be most appreciated.

yes you need to update your Airpost Express. I just went through this last week with two of my Airport Expresses. I updated my Base and my Remote's light was green but was unable to view it in Airport Admin Utility. So this is what I ended up doing and it works great.
First bring the Airport Express you are working on in the same room as your computer......just the ease of seeing what is going on with the Airport Express. Next you need to reset it.....take a paper clip and push in the little button next to the Audio port and hold in 10 seconds. Then unplug the unit wait 10 seconds and plug it back in. wait about 3 minutes and then you will need to use Airport Set Up Assistant. You will need to make sure you have WPA Personal on your Airport Express too.
don't forget to make sure you have the update firmware too.
http://www.apple.com/support/airport/
I hope this helps.....
Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive Mac OS X (10.4.6) Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport

How do I update the software on my iPad to iOS 6.3.1?

How do I update the software on my iPad to iOS 6.3.1 from iOS 5.1.1?

See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation. If you are trying to upgrade to iOS 5 or higher, then you will have to connect your device to your computer and open iTunes in order to upgrade.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

How do i update the software on my ipod touch? i went to settings, then general, but theres no option called software updates.

How do i update the software on my ipod touch? i went to settings, then general, but theres no option called software updates.

You needing to be running iOS 5 or later in order to do a Software Update from the device. To run iOS 5 you need a 3G or 4G iPod Touch. So if you really have a 4G iPod Touch, connect it to iTunes and you should be prompted about an update to its version of iOS.
See here for more information: iOS: How to update your iPhone, iPad, or iPod touch
B-rock

How do I update the software on my ipod touch

How do I update the software on my ipod touch

To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
Identifying iPod models

After cleaning my music, how do I update the tags in the songs?

Similar Messages

Maybe you are looking for