After Clicking Rejection(Enter and send message from portal )

Hi
I am able to allow user to enter rejection reasons using task TS20000139 (Enter and Send Message) when the user clicks the Reject button in SAP Gui. However when the user clicks Reject from the portal, the Enter and Send Message does not appear immediately. Instead it appears as a new task in the portal. Is there a way for the Enter and Send Message to appear immediately in the portal when the user clicks on the Reject button or any other task is there for Enter and Send Message supporting SAP portal...
please let me know the solutions...
Thanks
ram

Ram,
the Advanced with Dialog works fine only in certain scenarios, as Jocelyn mentioned in the following thread. pl go thru' this.
Extended Notification-Submethods and advance with dialog not supported...
COming to your requirement, if you want to provide a box for the user to enter Rejection reason on the portal side, you can use the User decision Actiion Handlers as given in the below link. It is very simple and fast implementaion.
I have done this recently, so if you need more details, let me know.
But go thru' the following help.sap link on ACtion Handlers.
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/df014b037141ca9afc6433ed42b519/frameset.htm
Hope this helps.
Regards,
venu

Similar Messages

Enter and send message from portal

Hi
I am able to allow user to enter rejection reasons using task TS20000139 (Enter and Send Message) when the user clicks the Reject button in SAP Gui. However when the user clicks Reject from the portal, the Enter and Send Message does not appear immediately. Instead it appears as a new task in the portal. Is there a way for the Enter and Send Message to appear immediately in the portal when the user clicks on the Reject button ?

Hi Ronaldo,
Also, as Jocelyn says...
Hi folks,
Actually advance with dialog will work under some specific scenarios from the UWL.
1. If you are launching work items using WinGUI.
2. If you are launching work items using SAPGUI for HTML and are on a high enough release .
In other words, it depends on the launch mechanism - not the UWL.
Try checking the launch mechanisms.
Regards
Raja Sekhar

GMail, IMAP and sending messages from the iPhone

I have recently switched from POP to IMAP. My ISP doesn't support IMAP, and so I get GMail to pop my ISP, and then download the messages from GMail with IMAP. Within GMail I have set things so that by default I can send a message through my GMail account using +my normal ISP's email address+; recipients are therefore unaware of my use of GMail - which is how I want it.
BUT ... messages sent from the iPhone show up as having been sent from my GMail address. Is there any way that I can change this, so they appear to have come from my normal address? I don't want to set up a second a/c on the iPhone, as I want all of the messages to stay within the GMail IMAP system.
GMail's web based >> >Settings >Accounts >Send mail as: >> facility does not seem to appear within the iPhone.
Or am I missing something?
Any assistance gratefully received

Many thanks for your reply - and I think that I understand what you are saying; however the GMail system does allow me to send a message using another "reply to" address so long as I have authenticated that email address within GMail first. I've been through that process, and I can send a message which appears to be from my normal ISP's address but in reality is sent through GMail (what some might refer to as using a spoofed address?) - but I can't do this from my iPhone.
If the restriction is insurmountable for the iPhone, I'll just have to revert to POP instead of IMAP, as I can then separate my normal address and my GMail address - it's just that a combined IMAP system would have been a more elegant solution ...
Kind Regards,

Nokia X2-02 and sending messages from PC from seco...

Hi,
I'm wonder if there is a possibility to send SMS message from PC Suite application connedted to Nikia X2-02 from second sim card.
If I'm doing it from my phone he is asking me which card he should use.
I would like to have the same ability to select sim card to send sms from PC. Is it possible?
Right now all the sms messages are sent from first sim cardo only from computer. Please help and thanks in advance.

Yes I know that can be set in the phone. But it can be done manually and in Sim Manager you can set only the type of service which should be used on selected card. Or manually can select one of the cards.
So it looks like that PC Suit always selects first sime. The second cannot be used to send sms.

TS20000139 Enter and Send message

Hi
We are using Trip request workflow WS20000040. and when the approver rejects the trip request then the task TS20000139 executes and pops up a window where approver writes his comments , receiver id (employee) and will send it to the employee. The process works fine but our requirement is to write the receiver id by default (i.e.by workflow itself) as Workflow Initiator.i.e.No need for manager to search his employee's user id and enter in the receiver field. How can we achieve this ?
Thanks
Shrinivas

Please don't ask new questions in an existing thread like this, for 2 reasons:
1) you can not award points
2) you are messing up the archive of answered questions
The recipient list is a multiline container element, so sending to more than one person is supported.
Message was edited by Kjetil Kilhavn:
Since I don't have access to a SAP system now I can't confirm that the recipient list is a multiline container element in this particular task, but SOFM.Send method supports multiple recipients unless I am getting completely senile.

How to send message from Message Driven Bean to JMS client?

In my project I have JMS client, two QueueConnectionFactory and Message Driven Bean. Client send message to MDB through the first QueueConnectionFactory , in one's turn MDB send message to client through the second Queue Connection Factory . I already config my Sun AppServer for sending message in one way, and sending message from MDB to the second QueueConnectionFactory. But on my Client there is an error : �JNDI lookup failed: javax.naming.NameNotFoundException: No object bound to name java:comp/env/jms/MyQueue2� (jms/MyQueue2 � this is the name of my Queue). So it couldn't get this message.
P.S.
Thank you for help!!!

What is the name of the second queue?is the connection factory on the local?Yes the connection factory is on the local. The name of my first queue is jms/MYQueue and the name of another one is jms/MyQueue2.

Updated my software and now I can't send messages from my iphone

I just updated the software for my iphone and ipad. For some reason, I can't send messages from my iphone anymore, and I can send them from my ipad. How do I turn the iphone messenger back on?
Thanks!

After researching the problem on this board, I turned my cell phone off, and waited 5 minutes. When I restarted it, everything worked! Thanks

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distress

If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

My iphone is sending messages from icloud and my phone number is not listed in the icloud settings now, just my e-mail address

My icloud used to have my phone number as an option to send messages from but now it is gone and only my e-mail address is there. This never happened prior to downloading the ios 7 update.

if you turn imessage off then restart your phone turn imessage back on it worked for me

Why is my iphone sending messages from my email and not my number?

My phone will send messages from my email rather than my number. I have gone to the settings to switch it to send just from my number. When i do that, it does not send. What do i do to fix this problem!?

Hello therealdeal333,
Thank you for participating in the Apple Support Communities.
It sounds like you're only able to send iMessages using your Apple ID (email address) on your iPhone. If you're not able to send iMessages using your phone number, first try signing out of iMessage and FaceTime on your iPhone:
Go to Settings > Messages > Send & Receive, tap your Apple ID, then tap Sign Out.
Go to Settings > FaceTime, tap your Apple ID, then tap Sign Out.
If you send iMessages from other devices (such as a Mac or iPad), sign out of those as well.
Then sign back in on your iPhone:
On your iPhone first, sign back in to iMessage and Facetime.
Sign back in to iMessage and Facetime on your other devices (if necessary.)
You can find the steps I quoted above, as well as more troubleshooting help, at this link:
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Best Regards,
Jeremy

Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

TS2755 is there a quick way to take a photo and send it from messages application on the computer

is there a quick way to take a photo and send it from messages application on the computer

Just the regular way. Take the photo and then open the Messages app and select that photo and send it. That does not seem hard.

Reject Travel Request (Enter and Send Msg Error)

Hi Experts.
I Copied standard workflow for approve travel request, and add a decision control to know whether is national or not. It seems that runs fine, but when the user choose to reject the request, the screen of "Enter and Send Msg seems to open" but in a blink the screen disappear. I checked agents, standar task 20000139 but i can't find any error.
Any Suggestions,
Thanks a lot,
Steve.

What is the Status of the Workflow. Is that particular task TS20000139 got executed?
If it gets completed without any user action then this activity step might have some condition that is activated in the condition Tab of activity step.
Thanks
Arghadip

Can we send and receive messages from iMessages ? If yes I am unable to do why plz. Send me the solutions THANKS.

CCan we send and receive messages from iMessages if yes why I am unable to do it plz.send me solutions THANKS.

Try reading through these troubleshooting guides for some help:
If you get an error when trying to activate iMessage or ...
If you can't send or receive messages on your iPhone, iPad ...

After Clicking Rejection(Enter and send message from portal )

Similar Messages

Maybe you are looking for