After Cloning database,how to add archivelog files for restore in oracle9i?

Friends,
I used to restore my oracle 9iR2 db from production to test server by cloning db method.
everything fine....im restoring by this method every week successfully.
i have restored my production db to test server yesterday successfully.
i want to restore today's data in the test server.
Now i have 13 archive logfiles. how can i restore these 13 log files to my test server?
is there any way to restore the latest archive log files without taking data file backup? or i have to do the same cloning db method for each time?
Thanks
Sathyguy

i have restored my production db to test server yesterday successfully.So restored mean you have started/open database with resetlogs right?
If yes , then you can't apply remaining archivelogs to this database.
Cheer,
Virag Sharma
http://virag.sharma.googlepages.com/

Similar Messages

How to delete archivelog file at standby database

Hi All,
I'm running Physical Standby Database on ASM. At standby database, I can see all logs using asmcmd:
ASMCMD> ls
thread_1_seq_14.330.625772527
thread_1_seq_15.346.625772527
thread_1_seq_16.329.625772527
thread_1_seq_17.327.625772559
thread_1_seq_18.324.625772599
thread_1_seq_19.341.625772367
thread_1_seq_2.325.625772329
But when I run RMAN to delete all these archivelogs, its give me error:
oradr:/u01/app/oracle$rman rcvcat rman/rman@rman target /
Recovery Manager: Release 10.2.0.3.0 - Production on Thu Jun 28 13:50:41 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: AIXDB (DBID=2438430915, not open)
connected to recovery catalog database
RMAN> delete archivelog all;
Starting implicit crosscheck backup at 28-JUN-07:01:50:56
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 06/28/2007 13:50:56
RMAN-12010: automatic channel allocation initialization failed
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20001: target database not found in recovery catalog
RMAN> register database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 06/28/2007 13:51:06
RMAN-08040: full resync skipped, control file is not current or backup
Even it is not registering it. So how to delete archivelog file at standby database.
Thanks in Advance
Rakesh

This appears related to Bug 3298797 that was supposed to be fixed in 10.2.0.1. The workaround is to switch over to the standby, register the standby and then switch back.

How to add ndf files in alwaysOn ?

HI All,
How to add ndf files in alwayson (database added in ag group).
Thank
Vijay

As per me:In Always ON you can add the data without breaking by alter database statement the file path (including the drive letter) of a given secondary database be identical to the path of the corresponding primary database.
In case drive letter is different, follow steps mentioned in below link:
http://technet.microsoft.com/en-us/library/hh510190.aspx
Please click the Mark as answer button and vote as helpful if this reply solves your problem

How to copy archivelog-files from a ASM instance to another ASM instance

Hello ,
our RAC database has to be moved to another Datacenter. The database has a size of several Terrabyte. Will will create a standby database (on a cluster) on the new datacenter (using RMAN backup). Since the RMAN backup takes rather long we would like to copy the archive logs to the new datacenter. Since the archivelog-files are stored on a dirskgroup of an asm instance we have the following question:
- how can the archivelog files get copied from the current location to the new location?
Rgds
Jan

VivaLaVida wrote:
Many thanks for your answer...
As a matter of fact the archivelogs are not backuped on a filesystem. If so we would copy them from the source to the destination host (that's easy).
The question is "how to get them copied from one ASM diskgroup to another ASM diskgroup". RMAN might be a good solution - but we would need to
figure that out...
We talking about 100 GB of archivelogs a day - therefore we don't want to wait until the standby database is configured and online. To have the archivelogs
already on the new host in the new datacenter would save alot of time.What is ASM version?
The copy is peer to peer? (i.e Can you copy files from one ASM to another directly?)

How to add audio files.

I'm using Premiere Elements 11 on my iMac. I can't for the life of me figure out how to add music files to the 8 or so that come with the program. Anybody else having this problem or am I just dumber than most?

Comstar 11 wrote:
As I put in my original post I might be dumber than most and that's still a possibility. I also tried the "Use Smartsound" same feeling that I didn't like the add on that just took me to another site to sell me music. I couldn't find the "Project Assets" box after looking almost everywhere. But..... I was in the "Quick" mode. Knowing I was a rank beginner I avoided the "Expert" tab. But after looking everywhere else I opened that tab and "It's A Miracle" there it was. Still stumbling through the learning process so thanks for your kind help. If I hit the wall again I'll make another post looking for help. Thanks Again.
I tried the Quick mode. When I did 'add media' in the upper left corner, video files went straigt to the project box. Then I tried an audio file and it went below the video in the project box. So, I see where in 'Quick' the 'Project Assets' box and step are skipped. Sorry about misleading you.
Either way, audio files get to the project box when you pick them up as a file on your computer.
There are two great sources to speed the learning process. lynda.com has courses that are like a personal demo of everything PrE does with a great coach explaining it. http://www.lynda.com/Premiere-Elements-tutorials/Up-Running-Premiere-Elements-11/109763-2. html A few if the chapters are free as a trial. The fee is $25 for a month of access. One month is more than enough if all you want is the one course.
If you prefere owning a course on a disk, video2brain is an alternative, but I don't think it is as thorough.
Bill
Bill

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

How to add PDF files into a slides? (Flash 8)

I am new to flash and I am using Macromedia Flash 8. My task is simple enough: I need create a Presentation with Screens from PDF files: I have 10-12 PDF files which I want convert into flash presentation.
I have read this tutorial:
http://w3.id.tue.nl/fileadmin/id/objects/E-Atelier/Phidgets/Software/Flash/fl8_tutorials.p df
Chapter 11: Basic Tasks: Create a Presentation with Screens.
I'm having trouble how to add PDF files into a slides: I want insert a whole pdf file as separate slide, without splitting pdf file into separate elements: pictures, text, etc. I tried import pdf file into Flash, wheen import there is shown prompt how program should process this pdf file(add in stage, library, as keyframes, etc) , not clear which option is correct for my task. What I got is pdf file splitted into multiple images, text, - which is not what I want. I want keep PDF files without changes, preserve original design and formatting, just convert this pdf into flash, so presentation will consist of PDFs organized in correct order, then add navigation buttons and some effects. How to solve this task?

Just to avoid potential confusion... PDF is an Adobe format, but Flash 8 is/was not. Flash 8 came out before Adobe bought Macromedia. Even today, I don't believe anything has been done to accomodate direct integration of PDF content in Flash.

How to add js files to sharepoint page using sharepoint designer

how to add js files to sharepoint page using sharepoint designer

Upload the files to your site collection into the site assets library or into the style library, depending on perference.
Then you can include the JS files either in the master page, page tempalte or using web parts.

How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

I have the latest adobe creative cloud and i'm using Mac 10.8.2
My client gave me a wmv file that she wants some people blurred out in the background but when I go to import the media, it's greyed out. I'm assuming that After Effects will be the best solution for this, but maybe there is another way.
I can purchase a video converter and convert it to .mov but that costs extra money that I don't want to spend just to do this one project.

How to add .m4r files from my computer to my tones in iPhone 6 iOS 8.1.1 ?

How to add .m4r files from my computer to my tones in iPhone 6 iOS 8.1.1 ?

You've sycned other content via your computer's iTunes to the phone ?
You can sync photos to your phone via your computer's iTunes : connect your phone to your computer, click on its icon towards the top left of the iTunes screen, and select Photos on the left-hand side of the screen :
Photos that you sync from a computer can't be deleted directly in the phone's Photos app, instead they are deleted by not including them in the next photo sync - so you will need to include all photos that you want from your computer in each photo sync.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

Hi Steve,
Thanks for your quick response. The original movies were taken on a Canon ES970 (1990's). I don't know the resolution but things were not as high tech back then.,.. I used a Roxio software to convert them on my MacBook Air. I didn't realize that I could use Adobe Premiere Elements to do that or I would have. However my old camera did not have a cable to attach it to a computer and the Roxio software came with it.
I then saved the recordings on an external hard drive. I did not make movies from them using iMovie or edit them in any way. They are simply .MOV files and they can be played on my Mac. Upon realizing how much memory it takes to work on videos, I decided it might be easier to burn DVD's on my husband's new Dell desktop that came with Windows 8. I downloaded Quicktime as suggested and still the movies can't be added to Premiere.

How can I get my time machine to allow me to recover files again? After upgrading to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.

How can I get my time machine to allow me to recover files again?
After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
I've searched and can not find a solution to the problem that's being encountered.

Yeap that all makes sense now.
Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
Over wireless are you waiting for the indexing to finish.. ??
Previous backup may not show for a couple of hours.
Long short of it.. Mavericks version of TM is a pain.
Sometimes it is easier to completely ignore the TM backup and do the restore manually.
I have posted the details here. See if this helps.
Can't access old files on time capsule

How to add a file to an existing package programmatically in Acrobat 8?

Hello
Is it possible to add a file to an existing package programmatically in Acrobat 8? (embed a pdf file in a pdf package programmatically); If so, how should I do it?
Thanks in advance,

Finally, I found out how to add a file to an existing package programmatically by using JavaScript (function: app.execMenuItem("AddFileAttachment")). Thanks for your help Ironsenth. However, I need to specify the file to attach programmatically and I can't figure out how to do it.
Could you let me know where I can find this information (what document to read)? Is there any parameters for the 'AddFileAttachment' method?
Thanks in advance,

How to add music files from other hard drives

how to add music files from other external hard drives??

Not sure what you are trying to achieve.. You can copy the files to anywhere you like.. but the TC is a backup target for Time Machine.. it is not a media server.. it is totally useless copying your files to the TC as they will not be backed up from there.. TC has no built in backup and TM cannot backup network drives.

How to add dll file to EAR project

hi,
i am working with JNI . how to add .dll files to EAR for deployment in NetWeaver.
regards
Guru

HI
GOOD
GO THROUGH THESE LINKS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2583bbf9-0701-0010-8db5-a558e0c6f1fe
http://support.businessobjects.com/documentation/product_guides/boexir2/en/xir2_bip_install_en.pdf
THANKS
MRUTYUN

After Cloning database,how to add archivelog files for restore in oracle9i?

Similar Messages

Maybe you are looking for