After Cloning from RAC to non-RAC, how can convert PCP to Non PCP?

After Cloning 11i E-bussiness suit from RAC to non-RAC, how can convert PCP to Non PCP?

Hi Hussein
Please clear me if am wrong.
1.Say my applications release is 11.5.10.2 with RAC and PCP enabled and cloning to multi node[Apps on one node and db on one side] and disable PCP
1.I wil clone my db to db node.
2.Copy the applications file system to target node and run adcfgclone and provide the values accordingly and it would complete successfully.
Now i have multi node target system.
To disable PCP
1.do i need to disable :Change the site level system profile 'Concurrent:GSM_Enabled' to have a value of 'Y' and make it 'N'.[because GSM is enabled by default after 11.5.7 ]. If the profile option is SET Y will be get any errors while bringing up CM.
2.As per previous note you have given, APPLDCP is set to ON by default when GSM is enabled [Considering i m above the file version [afpcsq.lpc ] ]
and also is GSM neccessary for single node applications.
In this case will changing the profile value is enough to disable the PCP or do i need to change APPLDCP also.
Regards,
Mannu

Similar Messages

After switching from XP to Windows 7, how can i get back my bookmarks

I monted windows7 and Mozilla again but the bookmarks disappeared!
What can i do?
Thank you
Yael

Did you make a backup of the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] that is in a hidden location?
If you only made a copy of the Firefox program folder then your bookmarks are gone.
See also http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

How can I get my non purchased song content from ipod touch 4 back to my itunes library. My library

How can I get my non purchased song content back into my itunes library from my ipod touch 4. My itunes had disappeared so I had to get another itunes & start again. I still have the original song content in the ipod.

There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

You have two separate questions here...
To get all your music into one playlist, select Music in the sidebar and click the Songs view at the top. Then, highlight all the songs and drag them into your playlist.
I don't know if it's possible to download all Purchased content (or do you mean iTunes Match content?) at once; try a few Google searches.

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

How do you disabled it if running the same?

Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

Retore the device from your iCloud or iTunes backup.
iOS: How to back up and restore your content - Support - Apple - http://support.apple.com/kb/HT1766

How can I stop apps from popping up on my iPhone after I download them on my iPad., How can I stop apps from popping up on my iPhone after I download them on my iPad.

How can I stop apps from popping up on my iPhone after I download them on my iPad., How can I stop apps from popping up on my iPhone after I download them on my iPad.

AUTOMATIC DOWNLOADS
How To > http://support.apple.com/kb/ht4539
Troubleshoot > http://support.apple.com/kb/ts3688

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks

I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device

mickyja wrote:
I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device
Micky,
The iTunes Store sells songs in AAC format. Most Android phones can play AACs. Just sync them to your phone per the instructions with the phone.
If by any chance your phone does require MP3 format, you can use iTunes to convert the files, per this guide:
iTunes: How to convert a song to a different file format - Apple Support
(This conversion does not require burning.)
For future reference, note that the iTunes Store is really optimized for people using Apple devices. You might find it more convenient to buy music in Mp3 format from Amazon Digital Music or Google Play Music.

My iPhone was stolen last night and I'm trying to recover all my photos from that phone and get them on my mac laptop. The iCloud photo stream only imported 1,000 photos from my stolen phone. How can I retrieve all of my other photos?

my iPhone was stolen last night and I'm trying to recover all my photos from that phone and get them on my mac laptop. The iCloud photo stream only imported 1,000 photos from my stolen phone. How can I retrieve all of my other photos?

You have to reset the device to Factory Settings in order to restore it from an iCloud backup. You probably want to back it up as is before you do this.
To do the reset after you have backed up the current device, go to Settings>Reset>Reset all Content & Settings. This will erase the device. If you are signed onto iCloud with Find My iPhone turned on, go to Settings>iCloud and scroll to the bottom to sign out of iCloud before you do the reset.
Once you have reset your device, you will set it up like a new phone. When it asks if you want to restore it from an iCloud backup, select the backup you want to restore it from.
Cheers,
GB

How can the symbol and non-English diacritical marking, etc accessed with combinations of letters and functional keys prior to Snow Leopard be achieved in Snow Leopard?

How can the symbol and non-English diacritical marking/punctuation pallet, available in pre-Snow Leopard OSes with various combinations of letter or number keys and functional keys, be accessed in Snow Leopard? Those pre-Snow Leopard versions worked on the fly as one was making text in any pedestrian application and its native font (Mail, Text Edit, for example). One didn't need to dig around in font libraries, change font preferences, etc.

> One didn't need to dig around in font libraries, change font
> preferences, etc.
It hasn't worked like that since the Early Chalcolithic (ie, System 7 or thereabouts).
You've already got plenty of answers. Briefly (and grossly oversimplified),
- Mac OS X conforms to a standard known as Unicode; in its current incarnation, it defines over 100k characters.
- A keypress is translated into a character according to the current keyboard layout.
- The graphic representation of a character (ie, glyph), is provided by the current font.
- If a font lacks a glyph for the requested character, either another font will be automatically chosen (Mac OS X text engine), or some form of feedback (empty box, question mark, etc) will be used.
- To inspect the actual key codes, use a utility such as Key Codes.
- To inspect the current keyboard layout, invoke Keyboard Viewer.
- To inspect the full complement of glyphs of a font, invoke Character Viewer (also accessed with the Special Characters command).
(Remember that both these utilities are resizable and zoomable -- you can enlarge them to a comfortable viewing size, then zoom out to see more of the screen for your original task.)
- For a more detailed look, use a utility such as UnicodeChecker.
- The default keyboard layout depends on your Mac OS X localisation.
(Keep in mind that there's no need to stick with the default layout; choose whichever one makes sense to you, given your language, habits, and proclivities. Mac OS X comes bundled with quite a few, including some obviously designed for the huddled masses of refugees from the Dark Side, who, in their wretched ignorance, have the unmitigated gall of labelling our native ways "really uncomfortable". Oh well, this, too, shall pass.
If none of the supplied keyboard layouts fits your needs -- if, for instance, you write your emails in Etruscan -- go out on the 'net, you'll find quite a few. Or write your own with Ukulele, it's not really all that difficult.)
- Use Keyboard Viewer to familiarise yourself with the current layout and to enter the odd character; but, to be proficient, you should learn your layout to the point that KV is no longer needed.
- Use Character Viewer to enter the odd character not available in the current keyboard layout.
Neither Keyboard Viewer nor Character Viewer are effective tools for more extensive needs, eg, for writing and editing bilingual or multilingual texts. In such a case, you should enable the respective keyboard layouts and switch between them with a keyboard shortcut.
A few interesting layouts bundled with Mac OS X have already been mentioned. Let me add three.
- Dvorak: several layouts based on the Dvorak keyboard. It is claimed that the latter is more productive and lessens RSI risk.
- US Extended: based on QWERTY, it offers a more extensive set of diacritics (eg, caron, breve) via dead keys.
- Unicode Hex Input: also based QWERTY, it allows input by Unicode codepoint (in hexadecimal), so it's the most extensive layout of all; eg, to enter the character "Parenthesized Number Twelve" (U+247F), hold down Option, type "247f", release Option.

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

When starting Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message.

When starting up Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message?
The error message is: what happened: Type Error: Components. classes ['@mozilla.org/extensions/manager;1'] is undefined.
It appears all the time already from the beginning after installing Firefox 4.

Thanks a lot. The Ask toolbar created this problem. Another problem is: When searching on the web via Google, normally it is possible to type a few letters and then look what appears and then click on the wanted word(s). A number of word(s) ineed do appear, however it is not possible to select any of them as ws possible as mentioned in olders versions.

When trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

when trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
You will need a minimum of 10-12 GBs of free space to install Yosemite, however, that is a bare minimum and should be at least twice that amount.

HT201269 Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

- The iTunes backup that iTunes makes included photos in the camera roll. If yo go to iTunes>Preferences>Devices what is the date of the backup? Is it when the photos were on the iPod? You have to restore from that backup.
- What may have happened is that you backup the iPod after you restored the iPod but before restoring from backup. iTunes only keeps one backup and overwrites the previous backup with the changes.

After Cloning from RAC to non-RAC, how can convert PCP to Non PCP?

Similar Messages

Maybe you are looking for