After cloning, OAM dashboard screen doesn't come immediately,why?

Hi
Created instance using rapidclone. Login page ok,when i click on OAM Dash Board didn't showup, why? Does it need to restart all services once again or any workaround solution?
When i see database datafile directory, it shows only 45 data files where demo instance has 199 data files.
Please clarify?
Thanks
Ateeq

Does it need to restart all services once again or any workaround solution? Please bounce the application services and check then (before doing any modifications).
Login page is ok but problem with Dashboard only. Do you mean you do not see the link? Or the services are down even all the components are up?
Please review the following notes:
Note: 413067.1 - No OAM Application Manager Link in R12 after a fresh installation
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=413067.1
Note: 419823.1 - OAM: Web Components Status: Shows Down Even When The System Works Fine
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=419823.1

Similar Messages

Screen doesn't come back after sleeping

Occassionally I find that after closing my MPB to put it to sleep the screen doesn't come back up after re-opening the laptop. The pulsing white light which tells you the machine is sleeping goes off, so it seems as if the machine has woken up.... but there's nothing on the screen. I'm forced to use the power button to shut the machine down and start up again.
Something to worry about?
(p.s. I just tested it again and noticed that when I close the lid the white light isn't pulsing, but rather stays lit)
Message was edited by: Scott F.

I just recently (within the last two days) started having this problem myself. I've only owned the Macbook for a few months (purchased it from Apple online store right before the new ones came out). I am thinking it might be due to a recent update or something.
When I close the lid, laptop sleeps but when you open it you can hear the CD tray spin up like it's trying to wake but doesn't. I've tried adjusting screen brightness via f-keys, changing the volume, etc. but seems like system is just locked up. I've been having to hold down the power button and force a reboot.

Screen doesn't come back after lid closing and open

Hi all,
I just replaced LCD screen from my old cracked one on my T61 7658-CTO.
There was no backlight, no indicator lights except WAN.
I tried another inverter, but same symptoms.
So, I tried another video cable, but same symptoms.
Then, I put the cracked one back in, but still same symptoms.
I can't figure out what's gone wrong.
I tried several other things and found out that
if I connect the video cable to the inverter in a half way from the left, then the screen works!
However, if I close the lid and open again, the screen doesn't come back.
And while screen works, if I power the laptop off and turn on again, the screen works fine.
So, I'm thinking there's something wrong with lid switch.
Correct me if I'm wrong.
I've seen a few people having same problem on this forum,
but nobody has an answer to this yet.
Please help me!

Nobody?
Could it be a damaged mobo or lid sensor? Or even some kind of fuse on mobo that people talk about?
It's really weird that lcd works perfectly with the inverter board only halfway connected to the vga cable.
If I push it fully for full connection, the screen goes dark; no backlight.
If I pull it out halfway from the right, then the screen come back and works very fine until I close the lid and open again.
Indicator LEDs never work except the WIFI one.

Caps lock blink 5 times on Compaq 615 laptop, but screen doesn't come on.

My Compaq 615 laptop screen doesn't come on, instead it blinks capslock 5 times. What shlould I do?
It has an AMD Athlon X2 processor, with Radeon 3200 graphics.
I didn't install any new software or hardware recently. All I did was work with the system at night, shut it down, and when I turned it on the following morning, the screen refused to come up, but the caps lock blinks 5 times.

Sorry to hear that. Please refer to the Blank Screen LED Error Codes document from HP Support. It sounds like a "General system board failure." The explanation says to contact HP for assistance. The motherboard might need to be replaced, and you will probably require the assistance of a technician to fix the problem.
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

When I plug my iphone in to synch with itunes the summary screen doesn't come up. It starts synching everything. I only want to synch music.

When I plug my iphone in to sync with itunes the summary screen does not come up. I only want to sync music. It starts synching everything.

Disable automatic syncing.
Whatever is selected under the various tabs for your iPhone sync preferences will go through the process of being checked - if there are any changes in regards to the data you have selected to be synced with or transferred from your computer regardless.

I can't install firefox 3.5. After I download it, it doesn't come up.

I have download firefox 3.5 many times. It downloads, but the firefox icon doesn't appear. I move the disk image to applications, but when I click on it, nothing happens.
== Everytime I have tried to install firefox. ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10_4_11; en) AppleWebKit/533.16 (KHTML, like Gecko) Version/4.1 Safari/533.16

https://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac

Trying to Install Firefox, the Run Screen doesn't come up. Nothing happens. What now?

I'm taken directly to the "Thanks for Downloading Firefox screen" Nothing else happens.
I don't have it currently on my computer.
I've disabled pop up blockers.
????

Assuming you're trying to download for Windows, go to this link: http://www.mozilla.org/en-US/firefox/new/
and click the download button. On the next screen, you should get a pop-up asking you to save a file. Do you get this?? If not, try refreshing the page. If the problem persists, let us know.

Apple logo is appear but home screen doesn't come

apple logo is there but i can not turn off the phone or even start.
when i attach to usb it only show apple logo
doesnt appear into itunes even..
canu help me out with this
this is iphone 3

You will probably need to put it in recovery mode and restore it. See http://support.apple.com/kb/ht1808.

Computer turns on but screen doesn't work

I turn the computer on and it sounds like it comes on but the screen doesn't come on...?

Read this.
MacBook Pro: NVidia Failure

IPad 2 "Slide to Unlock" screen does not come up...

When I close my smart cover and then re-open it, the "Slide to Unlock" screen doesn't come up. Now it goes straight to whatever page I was on before I closed the cover. I didn't change any of the settings, any reason why? And how do I get the locking screen back when I close the smart cover?!!

One must know that voiceover application on mode will not work with slide application, so first you have to off the voice over application, for that pl follow steps as under.
1) go to general application by single tab to setting button, followed by double tab to same button.
2) you would be in general manu, wherein again single tab to about application.
3) pl now understand carefully, use your four(4) fingers simultaniously to slide the screen, pl slide on upward direction ( in any case with help of 4 fingers your slide application would work with voiceover application on mode).
4) single tab to accessibility option, then double tab to same button.
5) go to voiceover application with sinlge tab, change voiceover application on mode to off mode.
6) say thanks to yourself and enjoy ipad2 again.
RBvaidya- Mumbai
my advise to you young guys: pl wash yr eyes four to five time by a tap water but do not use the towel to clean the water from eyes for 5 minutes, (this you should do as and when you get up from yr pc/ipad/mobile for other work.) your stress would get reduced to 90%

File Content Conversion -- Next line has to come immediately.

Hi ,
I have a structure with 3 fields and it is not mandatory that evytime all the fields has to come.
MH75 TEST1234         TEST12345
MH70 TEST1234         1
ML14 T1234
ML11 TEST1234         09151
ML62 TEST1234         4
I need to get the nextline once the record is ended like above.
1st record -- nextline has to come immediately after TEST12345
2nd record --nextline has to come immediately after 1
3rd record -- nextline has to come immediately after T1234
File COntent I used:
HEADER.fieldFixedLengths                              5,17,177
HEADER.fixedLengthTooShortHandling             Cut
HEADER.endSeparator                                     'nl'
But the output I am getting like below..
MH75 TEST1234         TEST12345
MH75 TEST1234         1
ML14 T1234
ML11 TEST1234         09151
Gap is coming If the value is coming. I dont want to get that gap when the field wont come. If the record stops at 2nd field then the nextline has to come immediatly and should not worry of 3rd field.
Please let me know if anyone knows.
Thanks
Seema.

Hi Seema,
Since you are using fixedFieldLength so because of this if the field won't come then also you will get gap.
What you can do is, if you know the incoming fields are space or tab delimated then use the below code in your sender CC.
HEADER.fieldNames      field1,field2,field3
HEADER.fieldSeparator (if space, then just use notepad give one space then copy & paset it here.
                                      in case of TAB also u can do the same trick)
HEADER.endSeparator   'nl'
Regards,
Sarvesh

My screen dims during phone calls but doesn't come back on after

It seems for the past several weeks my phone seems to dim when I put it up to my ear to take a call but then the screen does not come back on when I take the phone away from my face like it is supposed to. The screen seems to dim if anything comes within 3 or 4 inches of the sensor but the screen never comes back on and I have to hit a button.
sorry if this is re-hashing and I am sure there are others with this issue but frankly I can't seem to get this forum to search and come up with anything so I decided to start a new topic.

Did you try pressing the power button briefly?

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed?

I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed? Please help!

That is about normal. You can maximize battery life by changing some settings. See:
Apple - Batteries - iPod
Apple will exchange your iPod for a refurbished one for with a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. You can purchase a replacment for about $10
iPod Touch Repair – iFixit

After cloning, OAM dashboard screen doesn't come immediately,why?

Similar Messages

Maybe you are looking for