After connecting Ooma phone service, my airport still works fine but yellow light constantly flashes. Should I be concerned?

After connecting Ooma phone service, my airport works fine, but it constantly blinks yellow. Should I be concerned?

You will get error messages in the airport utility..
Please go to the utility and click on the red circle on the airport. It should have a number in it.. which will be the number of issues you have.. eg double NAT.
If you previously had the Airport setup as main NAT in the network.. the ooma device just took over.. so you need to redo the setup of the airport to have a subsidiary role.
If you don't understand  the issues list them for us.. but certainly adding the ooma is not going to go without effect.

Similar Messages

  • I just upgraded to firefox 6 and now cannot connect to the internet. IE still works fine but firefox won't connect. Any suggestions on how to get the new firefox to connect to the internet?

    I just upgraded to ff 6.0.1 via an automatic push. Since then, ff hasnt been able to connect to the internet. Error message:
    Firefox can't establish a connection to the server at www.google.com.Firefox can't establish a connection to the server at www.google.com.
    IE has no trouble connecting to the internet.

    After upgrading, your firewall may not be recognizing the new Firefox version and is not allowing it access to the internet. On your firewall progam's allowed applications list, remove Firefox, then re-start Firefox, try going to a website, your firewall will detect the new version of Firefox, then give the permissions needed for Firefox to have internet access.
    *See: [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.

    Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.

    The only thing I can think of is if you got a replacement D610 as rumored here:
    http://nikonrumors.com/2014/01/27/nikon-is-replacing-some-d600-cameras-with-new-d610-model s.aspx/
    In that case, you would need the new version of Camera RAW or DNG converter as per Camera Raw plug-in | Supported cameras .
    The other thing to check is if the files open in the Nikon native ViewNX software. If they don't it's time to call the service center.

  • When I enter my password to start my atv it tells me, that "there was a problem connecting to the network."  My Ipad works fine but not my new atv.  I have reset my password multiple times with no help.  I have also rebooted my wireless server.take it bac

    When I enter my password to start my atv it tells me, that "there was a problem connecting to the network."  My Ipad works fine in my house, but not my new atv.  I have reset my password multiple times with no help.  I have also rebooted my wireless server.  Do I take it back?

    Where is everyone????  Does anyone have an answer???
    Allik1

  • Airport Extreme works fine but I can't see it in Airport Utility

    Have seen numerous posts on this issue but no solutions!
    I have a MB Pro running 10.4.11, Airport Extreme and Airport Utility 5.2.1. The Airport Extreme works perfectly, with no connection issues, but I cannot see it anymore in Airport Utility. I have another Airport Express hooked up to my stereo (for airtunes only), and can see this in Airport Utility, but not the Extreme. The Extreme used to appear here, but no more. Otherwise works fine. Just need to be able to reconfigure it.
    Anyone know what the fix is????

    I have this same issue. Internet works, I can connect to it, but i doesn't show in the Airport Utility. Also, it doesn't let me connect to other computers or my AirDIsk. I am using 10.5. Unplug and plugin style reset fixes it...for a while. Any ideas anyone?

  • I have an old iPod Classic that still works fine but it is having difficulty establishing a connection to my computer.  It will make an incomplete connection but it takes a long time and the computer hangs up until the connection is made. iTunes can't see

    I have an old iPod Classic.  It still plays the music on it out of either port.  It is having trouble connecting to my Windows 7 (64bit) computer.   It takes about 30 seconds or more to connect and hangs the computer until it does.  Even though it shows up in connected USB devices and in Windows explorer it doesn't seem right.  Sometimes it does not make a connection and when it does make a connection iTunes cannot detect it, even though iTunes sometimes automatically launches when I plug in the iPod.  I've tried two different sets of cables with the same results.

    Check the iPod Hardisk health with the iPod  Disk Diagnostic, as posted by tt2
    https://discussions.apple.com/message/17776595#17776595
    It wont fix your problem, but may tell help troubleshoot, why it is freezing iTunes, especially when the Pending and Realloc numbers are high.
    have a nice day!

  • Everytime I get on a video chat i can here the person very well but they can't here me what can I do to fix this I have droped my iPod in water and also droped it and cracked it but it still works fine what should i do. Please respond ASAP!!!!!!!!

    Everytime I get on a video chat  I can here the person I'm chating with but they can't here me at all . Now I have droped it in water and my ceral and I have droped it in the street . But it's still working fine but running a little slow too. What can i do resond ASAP!!!!!!!!!

    Have you tried here:
    iOS: Not responding or does not turn on
    You can check your warranty coverage by entering the SN here:
    Apple - Support - Check Your Service and Support Coverage
    For how to get warranty work see:
    Apple - Support - iPod - Service FAQ
    The fastest is to make an appointment at the Genius Bar of an Apple store.

  • HT1338 Can't connect to  Gmail, all  other email prigs. work fine?

    When I try to assign Gmail as a email program it will not connect. All the same config types work fine but Gmail. Any suggestions?

    Robert Wilkins2 wrote:
    Thanks for your reply Csound. I know that it's not right to solve my own post, but after thinking the problem was solved, I clicked resolved. I wanted to share my "solution" with the community. Sorry about bad form.
    No bad form to worry about, just the reduced attention to your problem that a solved designation causes.
    If I remove my gmail account, I'll be able to get all the emails back when I create my new one - because it's imap?
    Yes, but check 2 things,
    1. That it is setup as Imap (POP is possible but is not the default) and 2 that you have not created any local folders that house mail from the Imap account, if you did then you must export them before removing the account.
    What do you mean by verify both passwords? You mean imap and smtp?
    I assume I should be using the application specific password in my mail settings?
    Thanks,
    Bob
    Imap and SMTP should be the same, but check.

  • I'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

    i'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

    According to http://en.wikipedia.org/wiki/IPhone_5
    the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
    It does not use SD cards.
    Fake iphones are really Android phones using the skin of iOS6.
    Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
    But if you are directed to Google Play, then I'm afraid you've gotten a copy.

  • Connect to phone/DSL thru Airport?

    i’ve just moved to an area which requires a dial-up connection. i’m trying to get online using the phone connection plugged in to airport and my built-in modem to dial up but it’s not working. is this possible?
    in the past i’ve never had a problem with my airport but i’ve always used the standard ethernet/cable connection, from a isp supplied modem – with my iBook. i’d never tried a dial-up connection with the iBook via airport as i never needed to.
    i just bought a powerbook and transferred all my settings over successfully (i think) as everything is working ok. i get a strong signal from airport and i’m sure i could get online if i had an ethernet connection. my powerbook airport recognizes my network and i can get online at other wi-fi locations no problem.
    is airport supposed to work this way, dialing up from my internal modem to my airport? when i plug the phone connection directly into my powerbook the modem works fine. do i have to re-install anything on my powerbook using my airport disk? i’d hate to mess something up.....
    thanks! ..... phil

    if your airport base station has a phone line port, then it should be able to connect to the internet with dial up and broadcast a signal for wireless internet.
    to get it working:
    1. connect phone line to base station
    2. connect to wireless network from airport menu on computer
    3. once connected to network, open the Airport Admin Utility
    ( located in /applications/utilities/Airport Admin Utility )
    4. when you open it up, you will see a screen with your base station listed.
    5. select base station and click on the " Configure " button
    6. this will take you to another screen, select the " Internet" tab
    7. in the "Connect Using" field. select " Modem v.90 )
    8. the following fields will change
    9. enter in your dial up number, and any other requested information
    10. click on " Update "
    11. you base station will restart and it will take a couple minutes for the network to come back up
    12. test out your internet connection
    If you still need help, you can call applecare, and they can walk you through it.

  • Jabber for iPhone & iPad too long to connect to "Phone Services"

    Hello,
    Has anybody ever experienced delay issues with Jabber for iPhone and/or iPad to connect to "Phone Services"?
    In my case, the service does connect but it can take about 1 minute. Some times it can be faster but some others it can take a while to make the service available.
    Regards,

    You've hit the nail on the head with your last sentence, though to me a month (and then another) to wait for a new line is nothing - I am on my fifth order with BT. They lost the first three, then tried charging me an arm and a leg in excess charges for the fourth. I am trying again, this time with a total package to see if they are a bit more useful when they actually know I'm not going to switch to another provider - fingers crossed.
    If they do come back with massive excess charges again though this time I've done my homework. I now know the measurements between my property and the pole as well as the BT price list they use to calculate the charges. I've also worked out a cheaper route than the one they were suggesting - Ofcom say they should offer the cheapest route and the opportunity for the customer to do some of their own work but with me they didn't do either. They also didn't consider that we don't have reliable mobile signal here. They also didn't provide me with any details of how they'd come to that figure and just demanded it. I've had lots of advice from DEFRA, the Department for Business, Innopvation and Skills, Ofcom and ex-Openreach planners and should be able to get a line under the USO. I have a horrible feeling that I've done all this homework now though and they'll just come out and do it without demanding the excess, but if they do I am at least ready this time.

  • I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

    I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
    I am also providing you with a screenshot of what appears! I need photos on my iPad2
    Message was edited by: angana

    You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
    You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

  • My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.   My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

    My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
    My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
    I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
    Thanks in advance.

    I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
    My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
    Airport Express is model A1143
    And I have tried to connect with iPhone - same same.

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

  • I recently installed a new Airport WIFI on my I-Book G-4.  Works fine, but the WIFI doesn't automatically come on after the PC sleeps.  How to fix??

    My new WIFI works fine, but doesn't automatically give me a WIFI connection when I "power up" or even after the PC sleeps.  I probably skipped a step in the installation process, but don't know which one.  I gone back thru the installation process a couple of times, but still no luck.  I've had a WIFI previously on this IBook G4 and it worked automatically.  This is easy to get going after "sleep," but after powering back up it more difficult, since the name is no longer in the WIFI airport list.  HELP??

    Have you tried System Preferences/Network Pane. Click on Airport and then click the options bar next to the show status in the menu bar. At the top of the next window is a a question "if no recent networks are found". Click and select the automatic choice. It may work.

Maybe you are looking for