After connecting to blue tooth no sound features work

I seem to have lost all my sounds from my iphone after connecting to my new car's bluetooth. I can only point to that change that might affect sound.
Siri works, and music plays, but no keyboard clicks, or message received sounds, or wooosh mail sent sounds.
Powered down and back on, nada. turned settings off and back on, nada. turned bluetooth setting off and back on, nada.
Turned sound switch off/on - still nothing.
Any hints?

Suri and Bluetooth dont play well together

Similar Messages

  • After connecting my blue tooth it works for a few incoming and outgoing calls.  Then for no reason when i make a call the other party cannot hear me and even if i try to click on the  speaker phone or hand set they cannot hear me.  rebooting required

    Blue tooth operation and lock up.  After i connect my bluetooth it works fine foe a few calls.  Then if i place an outgoing call, I cannot hear the reciving party but they can hear me.  Other times i can hear them but they cant hear me.  After rebooting the phine it works again for a few calls.  This is consistent with 2 diferent blue tooth devices?

    Sorry about the delay, I have been away from my computer for a couple of days.
    Since you are able to use Siri and dictate notes, that indicates the mic itself is working.
    I would suggest fully quiting the Phone app and resetting the iPhone.
    Double click the Home button (bottom center of the display with square icon on it) to get the fast switcher. Press and hold on one of the icons so they start "shivering" and the red "-" icons. locate the Phone icon and press the red "-" on it. Then press the Home button again to stop the "shivering".
    Then Reset the iPhone, press and hold the Home and Sleep/power (top right edge of iPhone) buttons until you get the Apple logo. Wait for it to finish restarting and then test again.

  • HT204387 My iphone4 and my iPad mini won't connect via blue tooth just continues to search

    My iphone4 and my iPad mini won't connect via blue tooth just continues to search

    What are you trying to do?
    The Bluetooth is meant for earplug, headset, keyboard, car hands-free set, and speakers.
    You need a 3rd party app to do BT file transfer or other functions between iDevices.

  • I am trying to connect my blue tooth canon printer with my ipad air?

    i am trying to connect my blue tooth canon printer with my ipad air?

    The iPad does not support Bluetooth Printers.    Headsets, Speakers, Keyboards, Hands Free Devices, In car Madia centers but not Printers.
    To use a printer it must be AirPrint Compatible and be on the same Wifi network as the iPad.

  • Hey there. This is wierd lolol. I just got a I phone 4. i cant connect my blue tooth. I need a PIN #??? what is that?

    Hey there. This is wierd lolol. I just got a I phone 4. i cant connect my blue tooth. I need a PIN #??? what is that?

    Try using 0000 if the instructions for your Bluetooth don't provide a passkey (PIN).  Also, see if this helps:
    iOS: Third-party Bluetooth headsets, headphones, and keyboards

  • Blue tooth mouse doesn't work

    A logitech m305 blue tooth mouse does not work on 15" Macbook Pro - works on the 12" however.  Any suggestions for trouble shooting?

    Michael Thompson6 wrote:
    Right, the receiver was plugged into the USB port of the computer that I was trying to use the mouse with.  And it worked on the 12" mbp and a mac desktop, but not the 15" mbp.  So, I am not sure about anything.  BTW, thanks for the Amazon picture showing the rf receiver.  I will try to download a driver for the M305 onto the 15" some day.
    Ok, it sounds like you have a handle on the situation. It's still strange that the mouse won't work at all on the 15" with the correct receiver installed. Usually the basic click and tracking functions will work even without special drivers. But, as you said, you do want to install the proper software for that mouse. Also make sure you try the reset button/process on the mouse. Once in awhile one of mine likes to be a bit finicky after I move from Mac to Mac, and I have to reset it (it "pairs" or establishes the connection between the mouse and receiver).

  • Blue tooth Device is not working in Iphone 4s why?

    Recently i purchased a New iphone 4s,
    I previously used to use 3gs i know for 3gs blue tooth will not be working.
    But everyone told me that blue tooth works for iphone 4s, Really getting annoyed by Iphone 4s for the first time.
    Pls help me in resolving the issue.
    and i was using version 5.1.1

    tpride8 wrote:
    Should i call Apple directly to alert them?
    Why?
    tpride8 wrote:
    After some research i have found that this is happening in MANY other cars (vokswagen, acura, etc.) and Mercedes told me they have only received these concerns with Apple products.
    Sorry, but that does not mean it is an Apple issue.
    Try deleting the pairing then pairing the devices again.  Does the problem continue?
    If it does, try basic troubleshooting from the User's Guide which is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue is still occurring at that point, take the device to Apple for evaluation and possible replacement.
    Nothing you've stated indicates and Apple issue.  If it were, all users with similar cars and head units would be having the problem and that simply is not the case.

  • Safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

    Hi Apple,
    iphone 5s latest updates , safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

    Hi,
    If you are absolutely sure that neither the sound output of the Macbook nor the sound output of VoiceOver are muted then try to reset VoiceOver.
    1. Open VoiceOver Preferences.
    2. From the File menu choose "Reset All VoiceOver Preferences …".
    3. Click "Reset.
    4. Turn VoiceOver Off and On again. (hold command and press F5 twice).
    If you still don't hear anything then it could be that the main sound output of the Macbook got muted somehow. I find that I often hit the mute button on my Apple wireless keyboard without noticing. So just make sure that its not muted and also hit the "Volume Up" a few times. Its so terribly obvious I know but its also very easy to miss. Lots of people do that.

  • I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

    I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
    I am also providing you with a screenshot of what appears! I need photos on my iPad2
    Message was edited by: angana

    You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
    You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

  • After update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

    after update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

    Maybe I understood your problem. Get to Settings > Sounds > Ringers and Alerts >Turn Change With Buttons to Off. And if your Side Switch is assigned to 'Mute', turn it back on, else, use the control center to turn off mute.
        P/s: And your name is...

  • IPhone 6 8.0.2 not connecting to Blue Tooth

    Having several issues with my iPhone 6 8.0.2, the most annoying of which is the blue tooth connection.
    My iPhone 4S was connecting automatically to my Subaru WRX car stereo via blue tooth as soon as I started my car and I never had any issues. Since I purchased an iPhone 6 it does not connect automatically, I need to open settings and attempt to manually connect multiple times because my iPhone usually fails to connect a bunch and asks me if the device Car M_Media is in range and turned on - yes, I'm sitting in it and it's running.
    So I guess my question is: how is this an upgrade?

    Did you already try to unpair the phone and pair it again after a restart?
    Unpair a device. In Settings > Bluetooth, tap next to the device, then tap “Forget this Device.” If you don’t see the Devices list, make sure Bluetooth is on.
    copied from page 42 of the user guide iOS8

  • TA24778 iPad - dropouts when streaming music via blue tooth to sound devices (Boom Box etc.).

    Hello,
    I use my iPad as a central music store.
    But -when trying to stream music via Blue Tooth I get dropouts all the time.
    It doesn't matter how far away I am, or where I'm using it. It gets a bit better when deactivating the BT Keyboard (yes, shame on me, I'm using the old style way to hack text into the Pad...), but I still get dropouts.
    I checked everything, batteries are fully loaded, dis- and reconnect several times, reboot, etc.
    On my devices (Logitech adapter for my home-hi-fi, Soundbric) I get the same result.
    Any Ideas?
    (Sorry - I can only choose "Using iPhone" as category, although I chose iPad first... Do I need to understand this?)

    I'm not sure what you mean by "mixed with audio in Alsamixer". Can you clarify?
    With that said, my problem did mysteriously fix itself after some update (presumably to alsa). Unfortunately, I noticed it in passing one day while I was changing the volume of something in pavucontrol, so I don't remember the exact update that caused it to work. But yes, my current setup does work now: I can listen to audio through my DAC and use the Yeti for recording. However, I have found that use of the Yeti crashes Google Hangouts, although it works perfectly in every other program I've tried.
    As documentation, here is my current working setup (it is very similar to the above): in PulseAudio, the DAC is set to be a Digital Stereo (IEC958) output. The Yeti (called an 'Integrated Rate Matching Hub' in pavucontrol) is set to be an Analog Stereo Input. In the input devices section, I have the Yeti's volume set to around 58% (-14.31 dB), which is past the base volume a fair ways but produces decent levels for recording. The DAC's volume is set to 100% (0dB gain, the DAC takes care of the level). In alsamixer, I have the mic level for the Yeti set to 40.
    Edit: This is a long-time-later edit, but let me say that when you have multiple USB audio devices, what USB hub and in what order they are connected seems to matter a great deal. If you can't get your Blue Yeti to work, try moving it to a different set of USB ports (controlled by a different controller) on your motherboard. This magically fixes the issue for me.
    Last edited by rwiggins (2014-12-14 00:26:39)

  • Blue tooth looks like not working

    Got i5 bur what ever i do the blue tooth just does not working

    What are you trying to connect your phone to?  Here are the supported files http://support.apple.com/kb/ht3647

  • Blue Tooth File Exchange Not working?

    Hi there...
    I tried for hours to send a file via my Macbook (Bluetooth) to my cellphone. My computer recognize my cell and my cell do recognize my computer. I'm trying to send a file from my Macbook, but when I press on "Send a File..." Nothing happens. I tried to open manually the Blue Tooth File Exchange Application in my Utilities, but nothing happened. I double-click, open, but nothing seems to open...
    Can someone please help me with my problem?
    Thanks a lot in advance.

    At first I had the same problem, but I found the solution.
    What I did was that instead of connecting the macbook to the phone, use the phone to search for the macbook, and then connect it.
    I have a BlackBerry and thats exactly what i did, because it didn't work if I got the computer to search for the phone and then connect.
    I hope this helps

  • After connecting Ooma phone service, my airport still works fine but yellow light constantly flashes. Should I be concerned?

    After connecting Ooma phone service, my airport works fine, but it constantly blinks yellow. Should I be concerned?

    You will get error messages in the airport utility..
    Please go to the utility and click on the red circle on the airport. It should have a number in it.. which will be the number of issues you have.. eg double NAT.
    If you previously had the Airport setup as main NAT in the network.. the ooma device just took over.. so you need to redo the setup of the airport to have a subsidiary role.
    If you don't understand  the issues list them for us.. but certainly adding the ooma is not going to go without effect.

Maybe you are looking for