After conversion error reading not a valid Win32 application please help

After uploading and converting my pdf to excel, i can not openthe file it reads not a valid Win32 application, what have I done wring
thanks
WW

Good day WW,
It sounds like the extension for the file may have been stripped when you downloaded the file after conversion. Try renaming the file with a .xlsx extension or convert the file again and ensure it saves to your hard drive with a .xlsx file extension.
Kind regards,
David
Acrobat Community Manager
Adobe Systems

Similar Messages

TS2776 i am getting an error itunessetup.exe is not a valid win32 application. please help.

I have downloaded the itunes setup but i am unable to install it. I am getting an error itunessetup.exe is not a valid win32 application. I have a toshiba laptop with windows 7 starter pack. please advise me what to do. thanks.

That's a Windows PC issue. What is the Mac OS X Lion issue? In other words what are you posting in the Lion forums about?

Can't update/install itunes- 'not a valid win32 application' PLEASE HELP

Hi Guys,
I'm having some serious problems with installing iTunes on my laptop. I have searched and searched the internet and can not find any solution to my problem. I am receiving the error "itunes is not a valid win32 application' after the program finishes downloading. Sometimes however it will just stop in the middle of the download. I use a SONY VAIO VGN-NW25GF which was only purchased last year. It uses windows 7. I had trouble downloading itunes to begin with though eventually it worked, however since the new 10.1 update has been available ive been attempting to update it almost every time i use itunes. Each and every time it fails and i've had enough as i need to update my iphone software. I’ve since uninstalled both itunes and quicktime hoping it will reinstall properly. But nothing, the same problem is occurring and now i have no itunes program!
I've tried all the solutions online about deleting browing history/temp folder and any itunessetup.exe/quicktimesetup.exe files and nothing works. I've also tried downloading using a different browser and still nothing. I’ve done a virus scan, disk cleanup and disk defragment and NOTHIGN is working. I'm starting to get quite frustrated as i need this program for my iphone. Any help would be greatly appreciated!! Thanks 

I have the same problem!!!!PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-I'm having some serious problems with installing iTunes on my laptop. I have searched and searched the internet and can not find any solution to my problem. I am receiving the error "itunes is not a valid win32 application' after the program finishes downloading. Sometimes however it will just stop in the middle of the download. I use a SONY VAIO VGN-NW25GF which was only purchased last year. It uses windows 7. I had trouble downloading itunes to begin with though eventually it worked, however since the new 10.1 update has been available ive been attempting to update it almost every time i use itunes. Each and every time it fails and i've had enough as i need to update my iphone software. I’ve since uninstalled both itunes and quicktime hoping it will reinstall properly. But nothing, the same problem is occurring and now i have no itunes program!
I've tried all the solutions online about deleting browing history/temp folder and any itunessetup.exe/quicktimesetup.exe files and nothing works. I've also tried downloading using a different browser and still nothing. I’ve done a virus scan, disk cleanup and disk defragment and NOTHIGN is working. I'm starting to get quite frustrated as i need this program for my iphone. Any help would be greatly appreciated!! Thanks 

Error message, not a valid win32 application

Please help if you can, because I am new to computers. I have downloaded itunes (setup), which is only 11 meg, but it should of been 56 meg. When I click on it now, it say's run, then itunes setup exe is not a valid win 32 application.
I have tried this about 4 or 5 times, even deleting the whole file and re-installing several times. Please help, many thanks

Have you had a look at this troubleshooting page? It may be of some help: iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application"

Error message "Not a valid Win32 application" when I try to install

I have downloaded the setup software several times but I cannot get any of it to load. I get the message that it is not a valid Win 32 application. I am running Windows 7. I have no problems with Thunderbird on other machines. There are no help paragraphs anywhere in your system that address this issue - at least not using the available public index.

if the installer is not valid, it will be because it has been corrupted in the download process. Usually by an over helpful anti virus program. As the installer is basically a 7Zip executable some corporate system will not allow the executable to run as it contains a ZIP file.

Satellite A300-1BZ: %1 is not a valid win32 application after themes change

Having had my Satellite A300-1BZ for a couple of years now I found myself suddenly bored of the standard vista themes and began to play around with changing them. (I was after an ultimate black look with changed start buttons and menu's etc)
Anyway cut to the chase, I went wrong somewhere with VistaGlazz following the steps of replacing something like shell32.dll
As it said in the readme file I changed it to shell32.dll.bak
My computer continued to run fine until I ran a restart. After that all I got after the log on screen was a blue screen with a mouse.
http://i69.photobucket.com/albums/i53/eazynowrudeboy/IMG000030.jpg
Luckilly I have an iphone so managed to get onto the internet forums and find a solution which was to use a command in cmd.exe which repaired the problem.
The only thing now is that I have an extremely basic windows classic theme which when I try to change it to Vista in theme settings it gives the message:
*"the theme could not load. %1 is not a valid win32 application"*
Any help and step by step for basic user would be much appreciated! I am guessing it cant all be that bad since Windows is still running and functioning correctly!
Thanks

Thank you for both your replies, I have attempted to do a system restore to various points however each time get an error message saying that the restore could not be completed? I will give it a go again later on and repost the contents of the message.
I then started digging for my recovery disks which I had to create myself when buying the laptop and have only managed to find disc one and I'm sure I remember creating two but cannot find it anywhere.
Do you know what content would be on disc two and whether I can do it with just number one disc?
Thanks for your assistance its very much appreciated!

Error message "play.exe is not a valid Win32 application"

when I click the play.exe file I get a error "play.exe is not a valid Win32 application" please can I have some help understanding why the player wont op

some information would help understanding the issue-
which operating system you are working on?
which version of UPK was used to create this play.exe?
does it work on other similar machines?
-SD

Error 'RecoveryMgr.exe is not a valid Win32 application' when trying to restore in Win7

I really hope someone can help as this is driving me mad!
System details - G62 Notebook running Windows 7
The notebook crashed after a Windows update and wouldn't boot up. I made it into the recovery manager and back my files before restoring to factory settings.
Since getting back in I am unable to get my files back. I have tried through the recovery manager but it does not allow me to see the files on the dvd. I have also tried through backup and restore but no joy there either. When I click on RecoverMgr.exe on the dvd I get error 'RecoveryMgr.exe is not a valid Win32 application' and it won't open.
I hope someone has managed to solve this before as I would love my files back. All suggestions greatly appreciated and thanks in advance.

Thanks Mumbodog. Unfortunately I have tried and the files won't copy. Starting to think they are corrupt! Have tried on a few different PC's but no luck. Really annoyed Any other suggestions?

Loading versions 4.3 & 4.2SP2, error message: "not a valid Win32 app"

Hello, I've been trying to install two versions of BDS, and both download fine, but upon clicking on the icon to install, I get the error message: "(name of app) is not a valid Win32 application".....does anyone know what the heck this means and how to fix it? Thanks much, Aaron Worley

Hi, I'm having the same problem. Has anyone got an answer.
I suspect it could be something to do with x64?
Help?

ITunes set up gives an error message saying not a "valid win32 application"

I am using Windows 7 and trying to download iTunes, but when I try to open the iTunes set up it gives an error message saying that it is not a "valid win32 application". It does the same for downloading quicktime. I have no idea what this means or what to do about it.

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download i

I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download it?

In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Error when installing VMM - %1 is not a valid Win32 application

Hi all
I'm attemping an install of SCVMM and despite installing all prerequisites I'm faced with the following when I launch the installer/disc and click 'Install':
"Error starting the Virtual Machine Manager Setup Wizard. %1 is not a valid Win32 application"
this error is the proceeded with another:
"Microsoft Visual C++ 2010 Redistributable was not successfully installed. The selected Virtual Machine Manager feature cannot be installed without this prerequisite. Retry setup or manually install Visual C++ 2010 Redistributable
from Microsoft Download Center."
The latter package is already installed and I have re-downloaded and re-installed as well to no avail. All .Net packages are installed too.
I'm running a Windows Server 2012 R2 x64 virtual machine in a HyperV host (HyperV Server 2012) and have navigated the disc and launched the "SetupVMM.exe" located in the amd64 directory as I realise the above Win32 error points to a x86 application
- still no joy, the same errors!
I have tried the installer in a VMWare 2012 server with the same error and on a physical Windows 7 machine again same error so this makes me think I'm either missing something basic or have overlooked something seems the environment doesn't seem to make
a difference (although obviously not attempted a x86 environment but SCVMM is listed as x86 or x64).
This is for a lab test and personal experience before production so I realise running SCVMM within a virtual machine that is hosted on the same hypervisor isn't good practice - but it's a start :)
Thanks in advance for any help you can give me.
Sam

Are you installing directly from the ISO? If so, you can try with a new ISO in case this is broken. Also make sure your machine is joined to the domain and that you are executing the setup in the context of a local administrator.
Eventually, try to copy the ISO to local disk and run setup from there.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

When I try to open Firefox 4.0 I get an error message saying that it is not a valid Win32 Application. What do I do? I am using Windows XP Sp3

I downloaded Firefox 4.o exe. When I tried to open it I got an error message stating that it was not a valid Win32 application. I am using windows XP SP3. How do I get it to open?

[[Firefox is already running but is not responding]] has steps that you can try. It sounds like you may have something that is hanging your browser on exit (probably an extension or a locked profile) and the steps on that page should help clear it up.

Sqlplus.exe is not a valid win32 application error

Hi All,
I have installed oracle 10gr2 on windows xp.
if i type sqlplus in command prompt i get this error
"C:\oracle\product\10.2.0\db_1\BIN\sqlplus.exe is not a valid win32 application".
i went to the path where sqlplus is present i observed that sqlplus.exe file was 0KB.
how can i resolve this problem. i want to upgrade oracle 9i to 10g so i need sqlplus of 10g to work properly.
please anyone help me out to solve this problem.
Regards,
Veeresh S

You'd have to find out how and why that file became 0KB in size.
If one file is 0KB in size, what assurance do you have that other files aren't
also corrupted ?
It could have been a virus-scanner wrongly attempting to quarantine the file,
it could have been a backup-restore session that copied the file back as 0KB,
it could have been some command that you executed in attempting the upgrade.

Repository[1].jnlp,directory[1].jnlp is not a valid win32 application error

Hi friends..
Hope you are doing well..
I have a problem in my xi...Actually i deployed jdbc drivers for My SQL 5.0 and MS sql also in my xi. So to deploy i started my xi server and i deployed. I deployed the drivers through SDM. It was done successfully. After that i opened Integration Repository .. its triggers the error message.. That
/Documents and settings/administrator/.../.../repository[1].jnlp is not a valid win32 application error and then i opened Integration Directory its also triggers the error message.. that
/Documents and settings/administrator/../.../directory[1].jnlp is not a valid win32 application error.. But my SLD and RWB is opening fine.. I don't know how to solve this problem. I think JWS is having some problem.. So please help me to solve this problem.. I have developed so many objects in my server..
Please friends help me ..

Documents and settings/administrator/.../.../repository[1].jnlp is not a valid win32 application error and then i opened Integration Directory its also triggers the error message.. that
/Documents and settings/administrator/../.../directory[1].jnlp is not a valid win32 application error..

>>>>
this seems to be an issue of corrupted jar files or a java web start. Have a look at this troubleshooting guide to help you track down the culprit -
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support

After conversion error reading not a valid Win32 application please help

Similar Messages

Maybe you are looking for