After converting from fla to html 5 "413" warnings!

Hi
We have a fla file for a homepage, where we build in Flash 4 and then convert to Flash 5. After we convert with Wallaby we was a little confused about so many warnings. Here the start of the big logfile:
<?xml version="1.0" encoding="utf-8"?>
<conversion_log input_name="main_flash5.fla" output_name="main_flash5.html" date="Tue May 31 12:53:10 GMT+0200 2011" >
<status label="reading fla file..."/>
<warning label="Unsupported feature: Compiled Clip Not Supported" context="CompiledClipItem not supported: Form" code="18"/>
<warning label="substituted missing font: Swis721 BT with Arial Narrow" code="23"/>
<warning label="substituted missing font: Walkway Black with Arial Narrow" code="23"/>
<warning label="substituted missing font: Cheboygan with Arial Narrow" code="23"/>
<warning label="substituted missing font: AG ForeignerULB-Plain with Arial Narrow" code="23"/>
<warning label="substituted missing font: GeoSlab703 Lt BT with Arial Narrow" code="23"/>
<warning label="substituted missing font: DINMittelschrift with Arial Narrow" code="23"/>
<warning label="substituted missing font: standard 07_55 with Arial Narrow" code="23"/>
<warning label="Unsupported feature: Compiled Clip Not Supported" context="CompiledClipInstance not supported" code="18"/>
<warning label="substituted missing font: English111 Adagio BT with Arial Narrow" code="23"/>
<warning label="substituted missing font: standard 07_56 with Arial Narrow" code="23"/>
<warning label="substituted missing font: kroeger 0853 with Arial Narrow" code="23"/>
<warning label="substituted missing font: standard 07_58 with Arial Narrow" code="23"/>
<status label="converting fla to HTML5..."/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: bg_1_1/FrameSet[1]: frames[3,14]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: bg_1_1/FrameSet[1]: frames[3,14]/Group[0]: instance of bg_1/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: Layer 35_1/FrameSet[1]: frames[2,10]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Dynamic Masks are not supported" context="Symbol: preloader_main/TimeLine[0]: preloader_main/Layer[0]: Layer 2/Mask contains multiple framesets: FrameSet[0]: frames[0,98]" code="31"/>
<warning label="Unsupported feature: Sound Not Supported" context="Symbol: preloader_main/TimeLine[0]: preloader_main/Layer[4]: Layer 16/FrameSet[0]: frames[0,99]/Audio not supported: Beep" code="15"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: footer_section_1/FrameSet[1]: frames[42,51]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Dynamic Masks are not supported" context="Symbol: eq1_my_eq/TimeLine[0]: eq1_my_eq/Layer[0]: Layer 1/Mask contains multiple framesets: FrameSet[0]: frames[0,37]" code="31"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[4,11]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[4,11]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[6,13]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[6,13]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[8,15]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[8,15]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[10,17]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[10,17]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[12,19]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[12,19]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Dynamic Masks are not supported" context="Symbol: eq1_my_eq/TimeLine[0]: eq1_my_eq/Layer[0]: Layer 1/Mask contains multiple framesets: FrameSet[0]: frames[0,37]" code="31"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[4,11]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[4,11]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[6,13]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[6,13]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[8,15]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[8,15]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[10,17]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[10,17]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[12,19]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[12,19]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Dynamic Masks are not supported" context="Symbol: eq1_my_eq/TimeLine[0]: eq1_my_eq/Layer[0]: Layer 1/Mask contains multiple framesets: FrameSet[0]: frames[0,37]" code="31"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[0]: frames[0,7]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
<warning label="Unsupported feature: Tween attribute is not supported" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Classic Tween/Tween attribute color transform: ColorMatrix" code="35"/>
<warning label="Unsupported feature: Unsupported Filter encountered" context="Layer: sq1_1/FrameSet[1]: frames[2,9]/Group[0]: instance of sq1_my_eq/HTML Filter export not supported" code="32"/>
I think, there are so many problems that we start to build the webpage from the beginning in html 5. Regards Marlise

It looks like you have a variety of issues here:
1) Missing fonts. Just like with anything else, you need to have the fonts you use in a file available on the machine where you are trying to utilize that file. I'm guessing the FLA was created on a different machine than where you ran Wallaby. Wallaby is just trying to make you aware that it is changing the fonts since it couldn't access the original font on the system where it was run.
2) Complaints about filters. At this time CSS3 doesn't support filters so these will be dropped in the FLA to HTML5 conversion. Starting with HTML5 will not help you here. You'd have to create your content in a different way in HTML5, change the content in Flash to not have filters, or just ignore the warnings in Wallaby and accept the visual differences. However, sometimes the visual differences w/o filters are too dramatic.
3) Complaints about compiled clips. Likely because of the use of components within the FLA. Wallaby doesn't support actionscript at this time and compiled clips use actionscript. Depending on what components you are using, trying to recreate similar content in HTML5 from scratch may be difficult.
4) Complaints about tween color transforms. These are effectively filters and fall in the same bucket as #2 above.
5) Complaints about dynamic masks. This first release of Wallaby only works with static non-moving content in masks.
6) Complaints about audio. This first release of Wallaby doesn't support sound.
We are actively working on a new release of Wallaby and will continue to add more features to make the transition from FLA to HTML5 easier.

Similar Messages

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

What happens when you click the Save/Download button after the file conversion is complete?

Receiving a message in my word document after converting from a PDF to word. Please advise

After converting and dowloading that converted file from a Adobe PDF file to a word document I then open the word document to see a message stateing
"To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
For further support, go to www.adobe.com/support/products/acrreader.html"
Please proivde advise on how to sucessfully convert the Adobe PDF file to a word document.

Hi Buster,
The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer. This file is usually already a fillable form. Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
I'm sorry for the inconvenience.
Please let me know if you have any questions or if I can be of further assistance.
-David

Unnecessary text behind listbox after converting from a web-page

When I make convertation from htm-page containing listbox to pdf, there also appear text on the back of Listbox object. The strings are equal to Listbox values. If I create listbox manually, these strings not appear. How to fix this bug?

OK, I see now what you mean. It's been a while since I've web-captured an HTML form and I've never noticed that before. I don't think there's anything you can do to prevent it from happening though. You can change the color of the text so it's not visible, or remove it through redaction or other editing tools.

Runtime Error 1009 After Converting from Flex 3.6 to 4.5.1

I am in the process of converting my application from SDK 3.6 to 4.5.1. The process is going smoothly thanks to the many resources out there including Greg Lafrance's series http://www.adobe.com/devnet/flex/articles/migrating-flex-apps-part1.html
I am now getting an error while the application is loading in the browser. The error text is:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at main/initApp()...
The error occurs in the AS code where I am attempting to get the URL from the player using the mx.utils.URLUtil library. In particular, I am setting a global variable in my app to the URL of the visitor. The specific code for this is:
this.stServerName=URLUtil.getServerName(mainApp.url);
Is URLUtil still in use in Flex 4.5.1? If not, is there another way to get the server name from the host?
Thanks!
Lee

URLUtil still exists. I would verify what is null.

Poor jpeg quality after converting from pdf.

I am trying to make a book video out of a collection of pdf files in Premiere Elements 11. Apparently Premiere does not take pdfs so I converted the pdfs to jpegs via Photoshop CS5. When I try to run the video the quality of the images is horrible - very pixalated and some of the text is unreadable. Even though Photoshop psd files are said to be useable I get the same results. Rendering did nothing. Help?

ksreid
What are the pixel dimensions of your jpegs?
For now, I will assume 1920 x 1080 pixels.
In Premiere Elements 11 Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset to:
NTSC
DSLR
1080p
DSLR [email protected]
After OK'ing the above, you will see the New Project dialog displaying your project preset.
Make sure that there is a check mark next to the option "Force Selected Project Setting on This Project" in the New Project dialog, and
then OK out of there.
Back in the Premiere Elements 11 Expert workspace, use Add Media/Files and Folders/ to get your source files
into Project Assets from where you drag the source files to the Timeline. Render the Timeline content and
determine if the quality of that content playback in the Edit area monitor is improved in comparison to your prior projects.
You might also explore applying fx Effects/Blur & Sharpen/Sharpen (just a little) to the Timeline content.
What is your intended export for your Timeline content?
Please review and consider and then let us know the outcome.
Thank you.
ATR

Kernel panic after converting from ext3 to ext4?

I'm running Arch 64 on a Lenovo ThinkPad R61. I did a pacman -Syu this morning and upgraded to 2.6.28-ARCH, among other things. I rebooted to verify that nothing went amiss with the kernel upgrade. Indeed, there appeared to be no problems. I then followed some directions on converting my partition from ext3 to ext4. (I did a tune2fs and then a fsck.) After finishing the fsck, I rebooted to find the following error message:
kinit: Cannot open root device sda2(8,2)
kinit: init not found
Kernel panic - not syncing: Attempted to kill init!
I rebooted twice and got the same result.
What should I do?

see http://bbs.archlinux.org/viewtopic.php?id=38136
i had this prolbem but i resolved
Last edited by ugaciaka (2009-01-16 17:20:06)

Appointments disappear in iCal after converting from MobileMe to iCloud

We recently converted to iCloud from Mobileme after upgrading to 10.7.2 and we have lost all of our appointments, both past and future in all calendars, both on the Macs and in iCloud.
When I first converted my machine, I had duplicate and triplicate entries, then after opening iCal for the third or fourth time, all entries dispapeared. My wife experienced the same thing this morning.
Checked the "Hide" boxes and all are unticked. If we add a new appointment, it will duplicate and/or disappear.
I have an iPhone and the calendar is empty on that also. My wife's Mac does not sync with an iPhone or any other device, just iCloud.
Any clues as to what is going on?

It took over an hour and three people, including second level support, but we have an answer.
Basically there is some confusion between the meta data being held on an external server (iCloud and/or Mobile Me) and the local machine. Here's the SBS for the solution:
In System Preferences, uncheck all syncing in iCloud (pay attention to messages)
Logout of iCloud
Logout of Mobile Me
Sever the Internet connection, killing the connection to the external servers
Restore the Calendar data stored in user/library/calendar via Time Machine or other backup source
Open iCal and export all calendars to a backup location (user/documents will do)
Reconnect the Internet connection
Open System Preferences > iCloud, log back in to iCloud and re-establish syncing for all desired options, including Calendar
Open iCal and import backed up data
Check calendar for accuracy in iCal and iCloud

Converting from .doc to .html

Hi,
I am utilizing Word 2003 to type my policies and procedures.
I am then using RoboInfo Publisher to convert them to html files.
However when I do this, all of the formatting, bullet points,
tabs, etc. goes out the window and the documents look the same and
are not usable for my nurses. There must be something that I am not
doing either in WORD or in ROBO that will allow the document to
look the same on both ends. Can anyone lend some assistance with
this.

This all depends on how you have your cascading style sheets
(.css) setup. If, for instance, you have a heading in your word
document formatted as Heading 1 whatever formatting associated with
it in Word (bullet points, font size, font type, color, etc.) will
carry through to Robo unless you apply a certain style sheet to it
after you import it into Robo. Style sheets in Word are typically
visible next to the font type in the standard toolbar. If not
present, they can be located under Format > Styles and
Formatting. You can set up a style sheet that formats Heading 1 (or
whatever you choose to call it) a certain way, Normal a certain
way, etc., apply this style sheet to each of your procedures, and
all of the formatting associated with that style sheet will present
itself. This saves tons of time as well as keeps everything
consistent. I hope this helps.
Gary

How to remove the automatically recognized hyperlinks in PDF after converting from Word?

Hi everyone!
When converting Word to PDF, texts with "http", "www", or email addresses with "@" are automatically hyperlinked.
The way Adobe Acrobat recognizes URLs is not by the text's underlying hyperlinks rather it is by the actual characters in the text. If the text contains "http" or "www" it recognizes it as a URL address, if it contains "@", it recognizes it as an email address.
I am aware that you could choose to disable the hyperlinks by going to Edit - Preferences - General - untick Create links from URLs. However, other users who have this ticked will still be able to click on the hyperlinks.
In Word, you can specify whether to add a hyperlink or not, or to direct the hyperlink to a different path. But in Adobe Acrobat, it automatically recognizes the hyperlink by its text. I know it is possible to manually add a hyperlink to a PDF, but is it possible to remove the automatically recognized hyperlinks?
Is there also some sort of ADM administrative template for this purpose?
Thanks.
.m.u.r.d.o.c.h.

I was thinking it could be possible with a document-level script that
removes all links, but then I saw that the link Acrobat adds are not real
link objects, so a script can't remove them. Therefore I think the answer is
no, you can't do it. The only way might be to use shorter addresses in order
to confuse Acrobat into thinking they're just plain text. For example, use "
google.com" instead of "http://www.google.com/". In my tests it remained as
plain text.

Using Word doc after converting from PDF

I have just purchased Adobe Export PDF purely to complete a Job Aaplication form in Word rather than PDF but the Word document does not allow me to edit it properly - i.e. I cannot expand the text boxes to make them bigger and when I try to add in information like my name and the post I'm applying for, it moves existing text from the original PDF doc onto different lines. I assumed once I'd converted it I could use it like a normal Word doc but it seems not. Please advise what I'm doing wrong, thank you.

Hi Disc9,
In order to help you. Let me know which application of Adobe you are using including the version.
Also let me know the complete workflow how you convert the PDF to docx/doc.
Regards.

Acrobat 8 Unable to Search for words after convertion from mircrosoft word

Hi all,
I got a problem with a user using Adobe Acrobat 8 search function. he converted his Microsoft Word document to PDF file. But he is unable to search/find most of the words after convention, even thou the word is right there it will just say it cannot find any matches.
His colleague have acrobat 7 and it has no such problem at all.
Erm is there any setting to for me to change or is there a need to update any patches? One more thing the Word document is make up of textboxs so is this the cause?
I would like some Expert here to give some advise/help here as i cannot downgrade to acrobat 7.
Thanks in advance.

Sorry, I make a mistake. He only can select some of the text document and only those can be searched. What is the cause and any setting to change?
For your Information
1 Our office is using Office 2000
2 Tried Using create Pdf -->Select the file, but the result is still the same. However
3 i tired to use Adobe PDF(printer) I am able to seach everything.
I haven tell the user the workround for no3, but i dun think he wants it and some need to adjust the margins.
Hope the information given to you will help you solve my problem.
Thanks in advance

Sending mail after converting from otf to pdf

Hi all,
i have an requirement of converting script output i.e., otf to pdf converting and i want send that account statement to the mail id which is maintatined in XD03 t.code,based on different customers differnt account statement should post ,
please suggest me ASAP.

use the function module
CONVERT to pdf
SX_OBJECT_CONVERT_OTF_PDF
- Email the PDF data using
SO_NEW_DOCUMENT_ATT_SEND_API1
examples
Option 1.
- converting OTF data returned from CLOSE_FORM (requested in OPEN_FORM) to PDF format using SX_OBJECT_CONVERT_OTF_PDF
- Email the PDF data using SO_NEW_DOCUMENT_ATT_SEND_API1
Result
>> Everything works fine except that the output cannot be sent to spool and previewed (due the request of OTF table in OPEN_FORM)
>> The PDF attachment can be downloaded and view directly.
Option 2.
- converting spool to PDF format using CONVERT_OTFSPOOLJOB_2_PDF
- Email the PDF data using
SO_NEW_DOCUMENT_ATT_SEND_API1
Result
>> The output can be previewed and sent to spool. No error returned from sending mail.
>> However, the attachment of PDF file cannot be downloaded (from SBWP Business Workspace). An error message "Database error for <GET DATA FROM KPRO>" was displayed when I try to download the PDF file
You can try something like this
IF SY-UCOMM = 'VIEW'.
CLEAR ITCPO-TDGETOTF.
ENDIF.
***OPEN_FORM
*etc
***CLOSE_FORM
IF NOT SY-UCOMM = 'VIEW'.
**SEND MAIL
ENDIF.
example code
REPORT ZSENDPDF NO STANDARD PAGE HEADING.
TABLES: TST05,
TSP01,
NAST,
T685B,
USR01.
DATA: BEGIN OF TAB_PDF OCCURS 0,
TLINE(255).
DATA : END OF TAB_PDF.
DATA: BEGIN OF TAB_OTF OCCURS 0,
TLINE(255).
DATA : END OF TAB_OTF.
DATA: BEGIN OF TAB_DATA_SET OCCURS 0,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000).
DATA : END OF TAB_DATA_SET.
DATA: BEGIN OF TAB_OTF_PAGE OCCURS 0.
INCLUDE STRUCTURE ITCOO.
DATA: END OF TAB_OTF_PAGE.
DATA : BEGIN OF TAB_OTF_PAGE_INDEX OCCURS 0,
LINE_NUM TYPE P.
DATA : END OF TAB_OTF_PAGE_INDEX.
DATA: BEGIN OF TAB_DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000).
DATA : END OF TAB_DATA_SET_LINE.
DATA : BEGIN OF TAB_TSP01 OCCURS 0,
RQIDENT LIKE TSP01-RQIDENT,
RQCOPIES LIKE TSP01-RQCOPIES.
DATA : END OF TAB_TSP01.
DATA :
LEN_OUT LIKE SOOD-OBJLEN,
LEN_IN LIKE SOOD-OBJLEN,
OTF_PAGES TYPE P,
*otf_max_pages type p value 100,
OTF_MAX_PAGES TYPE P VALUE 1000,
DATA_SET_LINECOUNT TYPE P,
*data_set_max_lines type p value 1000000,
DATA_SET_MAX_LINES TYPE P VALUE 100000,
DATA_SET_IS_OTF TYPE C VALUE ' ',
DATA_SET_LENGTH(5) TYPE C,
DSN_TYPE( TYPE C,
RC(10) TYPE C,
ERRMSG(100) TYPE C,
LINE_MAX TYPE P VALUE '100000',
STATUS LIKE SY-SUBRC,
H_PATH(20) TYPE C,
H_MASK(20) TYPE C VALUE ',.pdf ,.pdf. ',
FILE_NAME(20),
FILENAME LIKE RLGRAP-FILENAME,
C_PAGE_BREAK TYPE I,
K_PAGE_BREAK TYPE I.
PARAMETER : P_RQID(5) TYPE C.
START-OF-SELECTION.
END-OF-SELECTION.
PERFORM GET_TAB_OTF.
CLEAR K_PAGE_BREAK.
LOOP AT TAB_OTF_PAGE WHERE TDPRINTCOM = 'EP'.
ADD 1 TO K_PAGE_BREAK.
ENDLOOP.
CLEAR C_PAGE_BREAK.
LOOP AT TAB_OTF_PAGE.
IF TAB_OTF_PAGE-TDPRINTCOM EQ 'EP'.
ADD 1 TO C_PAGE_BREAK.
IF C_PAGE_BREAK GE 3 AND C_PAGE_BREAK LT K_PAGE_BREAK.
TAB_OTF-TLINE = 'EP'.
APPEND TAB_OTF.
ENDIF.
ENDIF.
TAB_OTF-TLINE = TAB_OTF_PAGE.
APPEND TAB_OTF.
ENDLOOP.
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PDF'
DEVTYPE = 'ASCIIPRI'
LEN_IN = LEN_IN
IMPORTING
LEN_OUT = LEN_OUT
TABLES
CONTENT_IN = TAB_OTF
CONTENT_OUT = TAB_PDF
EXCEPTIONS
ERR_CONV_FAILED = 1
OTHERS = 2.
PERFORM GET_PATH USING 'PDF_FILE'.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'BIN'
BIN_FILESIZE = LEN_OUT
TABLES
DATA_TAB = TAB_PDF
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
*& Form GET_tab_otf
FORM GET_TAB_OTF.
DATA: PART(4) VALUE '0001',
BEGIN OF MSG,
A(40),
B(40),
C(40),
END OF MSG.
REFRESH TAB_DATA_SET.
DATA_SET_LINECOUNT = 0.
DATA_SET_IS_OTF = ' '.
OTF_PAGES = 0.
REFRESH TAB_OTF_PAGE_INDEX.
CALL 'RSPOACSD'.
SELECT * FROM TST05 WHERE DTHREAD = 'X'.
CALL 'RSPOAOSD'
ID 'ID' FIELD P_RQID
ID 'TYPE' FIELD TST05-DTYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DSN_TYPE = TST05-DTYPE.
IF DSN_TYPE(3) = 'OTF'.
DATA_SET_IS_OTF = 'X'.
ENDIF.
ENDIF.
IF STATUS <> 24. EXIT. ENDIF.
ENDSELECT.
DATA_SET_MAX_LINES = ( LINE_MAX * '1.1' ) + 100.
DO.
CLEAR: TAB_DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD TAB_DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 36.
WHILE STATUS = 36.
CALL 'RSPOACSD'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ADD 1 TO PART.
IF DATA_SET_IS_OTF = ' '.
CALL 'RSPOAOSD'
ID 'ID' FIELD P_RQID
ID 'TYPE' FIELD DSN_TYPE
ID 'PART' FIELD PART
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ELSE.
CALL 'RSPOAOSD'
ID 'ID' FIELD P_RQID
ID 'PART' FIELD PART
ID 'TYPE' FIELD DSN_TYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ENDIF.
IF SY-SUBRC NE 0. EXIT. ENDIF.
CLEAR: TAB_DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD TAB_DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDWHILE.
ENDIF.
IF STATUS <> 0 AND STATUS <> 40. EXIT. ENDIF.
TAB_DATA_SET = TAB_DATA_SET_LINE.
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
TAB_DATA_SET-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
APPEND TAB_DATA_SET.
ADD 1 TO DATA_SET_LINECOUNT.
IF DATA_SET_IS_OTF = ' '.
IF DATA_SET_LINECOUNT >= DATA_SET_MAX_LINES.
CLEAR TAB_DATA_SET.
APPEND TAB_DATA_SET.
MOVE '----
' TO TAB_DATA_SET-DATA_LINE.
APPEND TAB_DATA_SET.
CLEAR TAB_DATA_SET.
APPEND TAB_DATA_SET.
WRITE: 'Abbruch nach'(029) TO MSG-A.
WRITE: DATA_SET_MAX_LINES TO MSG-B.
WRITE: 'Zeilen.'(030) TO MSG-C.
CONDENSE MSG.
TAB_DATA_SET-DATA_LINE = MSG.
APPEND TAB_DATA_SET.
EXIT.
ENDIF.
ELSE.
MOVE TAB_DATA_SET_LINE-DATA_LINE TO TAB_OTF_PAGE.
APPEND TAB_OTF_PAGE.
IF TAB_OTF_PAGE(2) = 'EP'.
ADD 1 TO OTF_PAGES.
IF OTF_PAGES >= OTF_MAX_PAGES.
MESSAGE S229(PO) WITH OTF_MAX_PAGES.
EXIT.
ENDIF.
ELSEIF TAB_OTF_PAGE(2) = 'OP'.
TAB_OTF_PAGE_INDEX-LINE_NUM = DATA_SET_LINECOUNT.
APPEND TAB_OTF_PAGE_INDEX.
ENDIF.
ENDIF.
ENDDO.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'RSPOACSD'.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
CALL 'RSPOACSD'.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
ENDFORM.
*& Form GET_PATH
FORM GET_PATH USING P_FILENAME.
CLEAR: H_PATH, FILE_NAME.
FILE_NAME = P_FILENAME.
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'CD' "// Current Directory
IMPORTING
RETURN = H_PATH.
CONCATENATE FILE_NAME '.pdf' INTO FILE_NAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = FILE_NAME
DEF_PATH = H_PATH
MASK = H_MASK
MODE = 'O'
IMPORTING
FILENAME = FILENAME"dbname
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " GET_PATH
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 5, 2008 9:50 AM

WLS 8.1 username/password on startup after converting from WLS 5.1

I have just converted weblogic.properties from a good installation under WLS 5.1
using WLS 8.1 tools.
The convertion appears to be successful but on startup WLS 8.1 requests a username
and password and none of the combinations I have tried so far worked. They all
lead to a message similar to:
The WebLogic Server did not start up properly
Reason: weblogic.security.SecurityInitializationException: Authentication for
user XXXX denied
The original weblogic.properties contained the following entry:
weblogic.password.system=weblogic
So, on startup I have tried username=system and password=weblogic but that didn't
work.
Any sound suggestions most welcome.
Thank you
Juan

Juan:
If you can't get it to boot, I am afraid you may have to "start" over. What
you can do is.
1) cd to a new directory
2) set your environment for 8.1
3) run "java weblogic.Server" answer prompts for user/pass
4) kill server
5) cp config.xml config.bak
6) copy in your 5.1 converted config.xml, make sure you remove/replace any
encrypted text password portions from your config.xml, putting inplain text
password values. When you boot the server it will reencrypt those sections.
*In general the conversion utility should just provide a guide, I really
think your better off starting a new domain and reconfiguring it "by hand"
with the console, jmx or by hand editing.
cheers
mbg
"Juan Jimenez" <[email protected]> wrote in message
news:[email protected]..
>
I have just converted weblogic.properties from a good installation underWLS 5.1
using WLS 8.1 tools.
The convertion appears to be successful but on startup WLS 8.1 requests ausername
and password and none of the combinations I have tried so far worked.They all
lead to a message similar to:
The WebLogic Server did not start up properly
Reason: weblogic.security.SecurityInitializationException: Authenticationfor
user XXXX denied
The original weblogic.properties contained the following entry:
weblogic.password.system=weblogic
So, on startup I have tried username=system and password=weblogic but thatdidn't
work.
Any sound suggestions most welcome.
Thank you
Juan

After converting from fla to html 5 "413" warnings!

Similar Messages

Maybe you are looking for