After converting my vid to constant rate with Handbreak, Premire Elements 11 gets choppy
I am using my cell phone SGH-T599 to shoot video. In order for me to edit it I have to convert it from variable rate to constant rate with Handbreak, otherwise the video and sound go out of sync. But apparently there is something wrong with the conversion settings because when I start to edit it doesn't run smoothly, the indicator bar skips and gets stuck. For example, I can not simply move the bar forward to speed up ahead. This makes editing extremely difficult specially if I want to make a cut in the middle of a sentence etc. Is there a way of fixing this, perhaps lowering the frame rate? I I've included a snapshot of both Handbreak and MediaInfo.
elpepin
When you are doing your HandBrake variable to constant frame rate, use the H.264 (x264) Video codec under the Video Tab.
I typically replace "Chapters" with seconds.
Container = Mp4
Leave the Picture Tab as is.
Head for the Video Tab.
Video Codec = H.264 (x264)
Dot the Constant
Dot the Constant Quality leave at 20 RF
Uncheck web optimize
Leave Presets at Regular/Normal
Leave the Audio Tab as is.
Guideline for now is to make only the changes necessary - change a variable frame rate to a constant one.
By the way, why are you using a HandBrake Average Bitrate = 1500 kbps (kilobits per second) when the source is 12 Mbps (megabits per second)?
Hit the Start Button at the top left of the workspace, and wait for the "Queue Finished" in the progress bar at the bottom left of the workspace.
Have you done that?
Please give it a try and then let us know the results.
Thanks.
ATR
Similar Messages
-
how can i to convert a file to .m4a format with constant bitrate and constant overall bitrate?
"Surely you have the same check boxes as me? Surely you can make the same selections, AAC Encode, Custom bit rate, 256k or 320k or whatever you want... Sample rate 44.1KHz, Auto Channels and VBR not selected?"
Yes.
" Have you tested this? "
Yes. I tested resulted files with "MediaInfo".
"If so what are the results?"
VBR. -
Can't create hyperlinks after converting a Word document with Acrobat XI Pro
Hello,
Here's my problem.
I'm making a catalog document for my company.
The document that I'm converting to PDF is made on Office Word 2013 and it's a .docx format file.
I'm on Windows 8 and the latest version of Adobe Acrobat XI Pro installed.
Inside my word document I have some pictures that have a hyperlink. Those hyperlinks directionate to a bookmark inside the word document. Inside the word document, if I do Ctrl+Click over the image, it will go to the page that has that bookmark. And it works. Period.
Beside that I also have some Cross-references on the word document. Those cross-references basically are the page number from the bookmark reference. By accident on most of those cross-refrences I left enabled the "Insert as hyperlink" on the cross-reference box options. When I Ctrl+Click over those cross-references I also go into the page of that cross-reference.
After I convert the word document into pdf, I can't get any hyperlink on the pictures, if I simply click on them, like if I click on a hyperlink on a webpage or something similar, the pdf won't go the the bookmark on the page that I've set on the word document.
The funny thing is that if I click on the other cross-references I can go to the page were that cross-reference is...
I tried all the methods to convert the file in order to obtain hyperlinks on the images...
I tried to use the Acrobat tab and the File -> Save as Adobe PDF, as both uses Acrobat PDFMaker, but nothing works.
Even tried all options on Acrobat PDFMaker but can't get it. "Create bookmarks", "Add links", "Convert Word Bookmarks", "...Word Styles to Bookmarks", "...Word Headings to Bookmarks", none works....
If I try to simply print from inside Word by choosing the Adobe PDF printer (like if I choose a regular printer), in the printers options it doesn't show up any hyperlink/link/bookmark option related, so that way is definitely a no go...
To reference, on 2006/2007 I also worked on a similar project and used this method on the word document (on Word 2003). At that time I had another Adobe Acrobat version, can't remember what version was...
This hyperlink situation was without any problem. After conversion, on the pdf file, if I click on a image it went to the right place inside that pdf file...
So I'm simply lost wether it's a problem of me, a problem of Word, a problem from Acrobat... simply lost...
I'm desperated....please, someone help me!!!Ok, sorry for never talk since the last time, but I finally discovered why I had this problem.
I found out that M$ decided somehow to change the process of embedded hyperlinks on a image, but in a docx it doesn't get affected. Only after transforming it into a pdf by Acrobat that the problem emerges...
I found this site http://www.pb-solv.net/2013/08/embed-pictures-in-microsoft-word.html
Basically all I have to do is "Use Insert, Quick Parts, Field, IncludePicture. This inserts the picture in the old way as a field. You can use Alt-F9 to reveal the field codes and change the images to be embedded rather than linked."
Then, after converting it with acrobat, the pdf finally have hyperlinks on the images!!!
They change this on Word 2007. As I had the 2003, at the time, I didn't had this problem.
As I said, M$ changed something, but only is affected after converting with acrobat. So, acrobat also missed something in the process. I call it a 50/50 guilt.
To bad no one ever notice this problem... -
Converting Units in LabView and specifying sampling rate with Universal Library functions
Hi,
I am having trouble converting units in LabView 7.0 and having it write to a file / output on a chart in Nm instead of in volts. I can't seem to find any straightforward instructions, eventhough it seems like a simple task.
Another task that would seem rather simple is changing the sampling rate with the XAIn program from the Universal Library for LabView (this is version 5.40).
If anyone could help me out, I would greatly appreciate it - I have tried other sources without much luck!
Thanks
JennaAre you really needing to change units or do you need to scale the voltages read from your sensors? If it's scaling, it would be trivial to set this up in mAX or with the DAQ Assistant if you were using an NI board. Since you are not, then you could use the Scaling and Mapping Express VI. The y axis of a chart is just a label. You can use the text tool to change it to anything you want.
I have no idea how to change sample rate for your board. Have you asked the vendor? -
Trouble with flickering after converting AVCHD files to Apple Pro Res 22
Hi guys.
I have figured out that Apple Pro res 22 is the best format for my AVCHD files.
But I am having trouble with the files after converting them to this format.
Every 60 frames I have a blurred frame.
This results in a flickering effect when watching the clip.
The original MP4 clip (AVCHD) plays fine on the Mac but when I convert is it flickers.
I have captured a still shot of the frame here
http://www.willpower.net.au/DOWNLOADS/FrameError.jpeg
Here are the settings I am using for the conversion
http://www.willpower.net.au/DOWNLOADS/Error.JPG
Here is the converted file in Apple Pro Res 22 format with the flickering
http://www.willpower.net.au/DOWNLOADS/SANY0007.mov
I'd appreciate any help that you can offer.Actually I think I might have found the answer.
After diggin deaper into the camera manual I have discovered that the setting I had it on "Full HD" actually is interlaced not progressive. Even though tha badging on the camera says Progressive"
So I think something got lost when converting the files to apple pro res.
I just shot a 10 sec clip on "Full HR" which is the progressive function and it converted nicely.
I'll come back to this post after shooting and making a little test movie today.
Thanks for your help.
PS. I wonder what codec it actually shoots in. Apparently it is not AVCHD but MPEG-4 AVC/H.264 compression (I thought that was AVCHD) -
How to add date with month after convert number to month?
How to add date with month after convert number to month?
Month Date Result
24 21/11/09 24*(21/11/09)
I want to add both the column and result should be 21/11/11
Thanks
NiharHmm,
Because, you are using YYYY for '09'.
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/RRRR'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/2009
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/YYYY'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/0009Or with Add_months
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/YYYY'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/0012
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/RRRR'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/2012-Arun -
No sound after converting to ipod format with quicktime
quicktime plays the unconverted file with sound just fine. after converting the video is fine but no sound. any help?
QT will not export sound from mpeg-1 or mpeg-2 files. Check you video before converting to see what the format really is. Open the video in the Player and use MovieInfo in the Window menu to check the format.
This freeware may help if they are mpeg files:
http://www.videora.com/en-us/Converter/iPod/ -
Muse 2014 - Problems after converting a Site with Safari
After converting a site to muse 2014 and exporting it to html the JS-error message "Einige der Dateien auf dem Server fehlen oder sind ungültig. Löschen Sie den Browser-Cache und versuchen Sie es erneut. Wenn das Problem weiterhin besteht, wenden Sie sich an den Autor der Website." ("Some of the files of the server are missing or incorrect") apears when opening every site.
I did not made any change to the site itself, the site was only converted and re-exported.
The error is only shown with Safari, but i only tried with IE 10 under WindowsWhen you republish your site, make sure you upload all files. New versions of Muse may change JavaScript files or CSS files for pages that you have not changed. The error message is indicating there are expected files that are missing or that files it found and loaded were generated from an older version and need to be updated.
-
Download and convert Youtube video to MP3---Just with one click
Download and convert Youtube video to MP3---Just with one click
Last week, when wandering around the Youtube watch.com, I was enthralled with the theme song of "Lost", especially the words of the song "I found out, on the corner of first and amistad, where the west was all but won all weeklong, smoking his last cigarette, I said: "Where you been?" He said: "ask anything.""......"
I couldn’t help expecting to save this song to my personal players. What a delightful thing listening to the song while walking or waiting for a bus! Okay, do you have the same experience as me? When hearing an exciting speech or dialogue, are you thirsty for downloading them and saving as your best memory?
Download, convert Youtube to mp3?—yes, you can.
Anna, one of my best friends, has posed a question "I have a Mac notebook and I only need the audio (mp3 music) of a certain Youtube movie, what shall I do?" The solution to the problem is shown as below:
Step one: Install a Youtube Converter for Mac as follows:
Step two: import the URL of Youtube video (or batches of URL) you wanna convert using "Add URL" icon. Select output format like audio (MP3) by "Settings" and customize your output file path with "Browse".
Step three: If you want your output audio much better, you can set the audio resolution like Bit Rate, Channels or Sample Rate presented in the following picture.
Step four: Click "Ok” button, it automatically download and convert your youtube videos simultaneously. After a few minutes, you can get the desirable audio (mp3) you want and enjoy it on any portable devices.
Download, convert Youtube videos to iPod, iPhone, iPhone 3Gs, PSP, Creative Zen, Zune, iRiver, and etc. --- done by one click.
Generally, if you want to download a Youtube video and then convert them to MP3 for your mobile devices, you need two Youtube tools: Youtube Downloader and Youtube Converter. But, now, with Pavtube Youtube Converter for Mac, you can both download and convert massive videos by clicking one "Ok" button.
Now, all the best, you can enjoy versatile Youtube music at a waiting room, on a bus, traveling, walking around the park or lying on your bed..Youtube's ToU specifically state that downloads of any content is prohibited unless there is a download button available for a particular video.
-
AIR-SAP1602I After convert to LAP, No radio interface
Hello,
Our AIR-SAP1602I is running ap1g2-k9w7-tar.152-4.JB6.tar and working normally.
Now, we covert AIR-SAP1602I from autonomous to lightweight which is running ap1g2-rcvk9w8-tar.152-4.JB6.tar to join C3850. (It will be joined then not-joined repeatedly)
After converting, we compare AIR-SAP1602I to another AIR-CAP1602I (It's working perfect with C3850 at this present) and find something strange via "show version" and "show capwap client rcb"
Can someone tell us how to solve this problems, thanks !!!
AIR-CAP1602I
Last reset from power-on
LWAPP image version 10.1.140.0
1 Gigabit Ethernet interface
2 802.11 Radios
AdminState : ADMIN_ENABLED
SwVer : 10.1.140.0
NumFilledSlots : 2
AIR-SAP1602I
Last reset from power-on
LWAPP image version 7.6.100.0
1 Gigabit Ethernet interface
------> No show:2 802.11 Radios
AdminState : ADMIN_ENABLED
SwVer : 7.6.100.0
NumFilledSlots : 0Can you test this with using full lightweight image (ap1g2-k9w8-tar.152-4.JB6.tar) or different recovery image (ap1g2-rcvk9w8-tar.152-4.JB5.tar). to see the problem is persistent.
HTH
Rasika
**** Pls rate all useful responses *** -
How to setup word docs, converted to PDF on local drive with links to a second file at a page
how to setup word docs, converted to PDF on local drive with links to a second file at a page
Need to setup a set of word documents, converted to PDF that has links from one file to a second file at a given page.
I would like to setup a set of pdf documents, on the hard disk of a PC or Mac, that can be open with acrobat pro running on the same computer and have the link jump to, and open in a new window, in acrobat pro, to a given page of a second document in the set.
Is there a way to setup a link in word and the conversion to pdf that will result in a link that is equivalent to the acrobat link type you get when you add a link of the type Go to a page in another document?
Tools-Advanced Editing-Link tool, make a box
Check: Go to page view, Next (Create go to view dialog opens)
Open second document and go to page
Click “Create go to view dialog” to set up link
Result is a link, when view by link properties, with an action of
Go to a page in another document
File: C:\My Documents\second file.pdf
Page: 43
Zoom level: Custom
I got close but did not solve the problem:
I have a version that uses links to a website, using #page=43 at the end of the hyperlink.
That works but will only open to the page if is through the web browser, opening the acrobat reader plugin.
I need to open from a folder on the local harddisk (with relative links), in acrobat pro to the given page of the pdf, on a PC or a Mac.
I could bookmark each page “pagenumberxxx” and jump to the bookmark/page if that would get around some problem
Current Systems in use to create documents with links and view them:
Windows XP SP3
Word 2003 SP3
Acrobat 9 pro version 9.4.4
Or just to view them:
Mac OS 10 Lion version 10.7.4
Acrobat 9 pro version 9.5.1
(note I have limited understanding of Mac’s)
JohnNo. There seems to be no automated way to do it. You can of course go into the PDF and manually add links after you have converted to PDF, but that is what we want to avoid having to do. We want it to be automatic from the Word doc.
-
Word macros are disabled after converting to a PDF document.
We work with Word templates that contain macros.
After you convert a Word document into a PDF document, the macros of the attached template are disabled.
The conversion takes place via the Adobe Acrobat icons.
Used Products:
- Windows7
- With Office 2007 SP2
- Adobe Acrobat 9.3.3 Pro
The described problem only occurs in Word. Outlook, Excel and Power Point are not affected.
Thank you for your time and helpHi Buster,
The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer. This file is usually already a fillable form. Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
I'm sorry for the inconvenience.
Please let me know if you have any questions or if I can be of further assistance.
-David -
Why do lines show up after converting Word doc?
Acrobat X Pro
After converting a regular Word doc, which doesn't 'appear' to contain lines around the paragraghs, contains lines in the PDF. I believe I have chosen the highest quality in the convert settings, and cannot figure out why I'm getting this junk in the PDF. I'm only having issues with a Word file received from the same person.
How do I clean up the Word doc before converting, I guess is the real question...
Confused!George, thanks for your patience with me! I created a shared workspace via Acrobat.com...but not quite sure how to share it with you... I think I emailed the forum at:
discussions-community-acrobat-creating__editing_&[email protected]
Please let me know what I need to do to share the workspace. Thank you again.
Rhonda -
Wavy lines in bar charts after converting a Powerpoint to a pdf?
After converting a Powerpoint file to a pdf, the bar charts have wavy lines. The one thing I noticed is that the problem appeared when creating the pdf with Notes showing. If Notes are turned off, then the bars are fine.
Is there a solution for this?Version is Office 2007.
OS is Windows 7.
Viewer - I think it is Acrobat 9 Pro.
When printing, the option to print notes is chosen. If the option is just slides, the bars in the charts are normal.
To create a PDF, the Powerpoint file is open --> then go to Print --> in the Print dialog box, change the printer name to Adobe PDF and print. -
Receiving a message in my word document after converting from a PDF to word. Please advise
After converting and dowloading that converted file from a Adobe PDF file to a word document I then open the word document to see a message stateing
"To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
For further support, go to www.adobe.com/support/products/acrreader.html"
Please proivde advise on how to sucessfully convert the Adobe PDF file to a word document.Hi Buster,
The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer. This file is usually already a fillable form. Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
I'm sorry for the inconvenience.
Please let me know if you have any questions or if I can be of further assistance.
-David
Maybe you are looking for
-
5520 - Server Connection Error 403
Hi Kyle, I imagine it's getting quite boring for you, since you've been hearing the same story for over one year...! I bought a 5520 a few months ago, it worked fine till a few days ago. Since then I can't "scan to email" any more. May I ask you to
-
My flash player doesnt display text
so every time i goto youtube.com or listen.grooveshark.com, theres text it the flash player thats suppost to show up, for like the names of videos or music. but its not there any reason why, and how do i fix it...? i use google chrome but i've found
-
ADFS server in NLB cluster unable to reach all servers in the same subnet
I have 2 ADFS (3.0) virtual servers (server 2012 R2 on VMware) in an NLB cluster (setup for Office 365 initially) and want to be able to use the SAML to connect to a couple of Linux servers in the same network to allow SSO to the Linux boxes. It was
-
I get Exit code 20 error message when trying to install Master Collection 5.5. Please assist.
-
Why isn't PSD backwards compatibility to previous versions?
I already have two licenses - one for CS4 suite on one machine and CS5 suite on another. Some of my CS5 files are not backwards compatible - not recognized in CS4. I have spent a lot of money - and you release new versions practically every year.