After CPU replace I cannot start my Satellite S1400-553S
Hello
I opened up my Toshiba laptop to replace the CPU a newer one among other components salvaged from an other Satellite, when I replaced them and closed it back up I cant seem to boot it up now.
When I press the power button the floppy drive makes a noise for a slit second and goes off again and the yellow power cable LED comes on.
I have put the original components back into the machine, but I still have the problem.
Any idea as to whats up?
Thanks
Rob
Hi there,
it could be that youve damaged your mainboard with the other CPU. I mean did you checked before if the CPU type you wanted to install was intended to run in your machine?
If I were you I would throw the machine in trash and forget about it since repairing such old machine is senseless, especially after trying to repar it by yourself..
Cheers and nice weekend
Similar Messages
-
I have windows xp and installed Firefox version 4. and it informed me it disabled something because it was incompatible but I did not write it down. do you know what that is? after that, my laptop cannot start net.exe, calcls.exe, and cmd.exe application any more.
See [[Firefox keeps opening many tabs or windows]]
-
DV7 doesn't wake up after CPU replacement
Hi
My DV7-1135nr (motherboard 480365-001) stopped working two weeks ago (black screen, no booting, fan spinning). I realized it's the processor's fault because of the once-blinking capslock LED. It had ZM-82 installed.
I bought used ZM-80 and installed it. After the replacement it's even worse, because it powers up for 1 second only. Then it seems like shutted down. Screen still doesn't show up, fan is starting spinning but now capslock LED doesn't blink. The only blinking LEDs are the one on the right (1) - it blinks every time I press power button - and the left one (2) - it blinks sometimes. Photo of motherboard with LEDs: http://bit.ly/1aLYxno
What did I do wrong? What should I do now? Please, help.
PS: Sorry if I made some mistakes in the text. I'm not native English speaker.If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following lines:
reset-nvram
press Return on keyboard
set-defaults
press Return
reset-all
press Return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE -
Cannot awake from sleep after CPU replacement.
I recently upgraded my arch machine from E4500 CPU to a E6700 CPU. Everything seems to be okay, but for some reason I can no longer awake from suspension. My computer kind of just sits with the little blinking white under score at the top of the screen, which interestingly enough isn't blinking.
I was hoping someone may be able to interpret what's going on in these logs for me. I see some errors, but I feel like they shouldn't be completely messing up suspensions.
pm-suspend.log:
Initial commandline parameters:
Sat Jan 14 12:55:38 EST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux LINOOX 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 09:11:37 CET 2012 x86_64 Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz GenuineIntel GNU/Linux
Module Size Used by
des_generic 16267 0
md4 3593 0
md5 2345 2
hmac 2985 1
nls_utf8 1320 4
cifs 275990 5
fscache 41098 1 cifs
rfcomm 34229 8
bnep 9149 2
uinput 7848 1
ipv6 288122 36
ext2 63283 0
arc4 1410 2
nvidia 12069499 42
rt2800usb 14304 0
rt2800lib 39851 1 rt2800usb
uvcvideo 64995 0
crc_ccitt 1363 1 rt2800lib
rt2x00usb 9076 1 rt2800usb
videodev 85100 1 uvcvideo
rt2x00lib 34978 3 rt2800usb,rt2800lib,rt2x00usb
snd_usb_audio 93005 4
media 10565 2 uvcvideo,videodev
v4l2_compat_ioctl32 8644 1 videodev
mac80211 221981 3 rt2800lib,rt2x00usb,rt2x00lib
snd_usbmidi_lib 18697 1 snd_usb_audio
cfg80211 165796 2 rt2x00lib,mac80211
snd_rawmidi 19458 1 snd_usbmidi_lib
snd_seq_device 5300 1 snd_rawmidi
joydev 9895 0
cryptd 8309 0
aes_x86_64 7508 1
aes_generic 26138 1 aes_x86_64
ecb 2073 1
btusb 11385 2
bluetooth 150884 23 rfcomm,bnep,btusb
rfkill 15498 4 cfg80211,bluetooth
evdev 9530 9
ppdev 5774 0
snd_hda_codec_realtek 282272 1
firewire_ohci 29682 0
psmouse 55501 0
firewire_core 50872 1 firewire_ohci
crc_itu_t 1363 1 firewire_core
pcspkr 1819 0
serio_raw 4294 0
iTCO_wdt 11789 0
i2c_i801 8187 0
iTCO_vendor_support 1961 1 iTCO_wdt
r8169 45411 0
mii 4059 1 r8169
snd_hda_intel 22442 3
floppy 58447 0
parport_pc 30042 0
snd_hda_codec 81242 2 snd_hda_codec_realtek,snd_hda_intel
parport 31631 2 ppdev,parport_pc
snd_hwdep 6357 2 snd_usb_audio,snd_hda_codec
i2c_core 20460 3 videodev,nvidia,i2c_i801
snd_pcm 74368 3 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_timer 19544 1 snd_pcm
snd 58362 24 snd_usb_audio,snd_usbmidi_lib,snd_rawmidi,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6210 1 snd
snd_page_alloc 7153 2 snd_hda_intel,snd_pcm
intel_agp 10904 0
button 4470 0
intel_gtt 14455 1 intel_agp
processor 24224 0
vboxdrv 1790690 0
fuse 66858 6
ext4 375829 2
mbcache 5881 2 ext2,ext4
jbd2 70763 1 ext4
crc16 1359 2 bluetooth,ext4
sd_mod 28275 8
usbhid 35352 0
pata_acpi 3376 0
hid 82435 1 usbhid
uhci_hcd 23084 0
pata_jmicron 2480 0
ahci 20005 5
libahci 19559 1 ahci
libata 166692 4 pata_acpi,pata_jmicron,ahci,libahci
scsi_mod 132826 2 sd_mod,libata
ehci_hcd 40762 0
usbcore 144272 11 rt2800usb,uvcvideo,rt2x00usb,snd_usb_audio,snd_usbmidi_lib,btusb,usbhid,uhci_hcd,ehci_hcd
total used free shared buffers cached
Mem: 4052256 1043508 3008748 0 53216 369732
-/+ buffers/cache: 620560 3431696
Swap: 5117948 0 5117948
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /etc/pm/sleep.d/02g15.sh suspend suspend:
:: Stopping g15daemon [BUSY] [DONE]
/etc/pm/sleep.d/02g15.sh suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
/usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sat Jan 14 12:55:42 EST 2012: performing suspend
pm-powersave.log:
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:
/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.
/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for / to 0...Done.
Setting journal commit time for /media/linux_support to 0...Done.
/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.
/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: line 9: echo: write error: Operation not permitted
/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sdc4 to 256...Done.
Setting readahead for /dev/sdb1 to 256...Done.
Setting readahead for /dev/sda2 to 256...Done.
/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
Setting SATA APLM on host6 to max_performance...Done.
Setting SATA APLM on host7 to max_performance...Done.
/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
cat: /sys/class/net/wlan0/device/enable: No such file or directory
/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:
/usr/lib/pm-utils/power.d/xfs_buffer false: success.
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:
/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.
/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for / to 0...Done.
Setting journal commit time for /media/linux_support to 0...Done.
/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.
/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: line 9: echo: write error: Operation not permitted
/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sdc4 to 256...Done.
Setting readahead for /dev/sdc3 to 256...Done.
Setting readahead for /dev/sdb1 to 256...Done.
Setting readahead for /dev/sda2 to 256...Done.
/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
Setting SATA APLM on host6 to max_performance...Done.
Setting SATA APLM on host7 to max_performance...Done.
/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
cat: /sys/class/net/wlan0/device/enable: No such file or directory
/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:
/usr/lib/pm-utils/power.d/xfs_buffer false: success.
Anyone see anything out of the ordinary in there that I should be looking at?
Thanks!Aw, i feel sorry for you.
I don't have a clue about your problem though, have you tried suspending from a live cd? If the problem persists there, your best bet is probably bugzilla.kernel.org... -
After BIOS update Cannot start my Satellite L305-S5885
Last night I've update the BIOS of my notebook, but when the BIOS flashing finished, it restarted Windows. The machine could not start again. The CD/DVD device enter in a cicle with a yellow light, and in the screen does not appear anything. Can somebody help me to solve this problem.
Old Bios: v1.40
New Bios: v1.50
OS: Windows XP with SP3
I can't use the CD/DVD device to boot with a Win PE.
ThanksHello!
I think the BIOS was not successfully because your notebook doesnt boot again.
In this case you cant make a lot of.
Try this: Remove the battery and AC/DC adaptor, wait up to 1 hour and then connect the battery and AC/DC adaptor. Try it again and hope it works.
If it not works you should contact a local ASP. In worst case the mainboard must be exchanged :(
Greets -
Hello,sorry for my bad english, I have a Lenovo b590 laptop essentials that work very well but I did upgrade to Intel Core I5 3210m. Initially with Pentium 2020m. The upgrade was done professionally, all goes well, is recognized by the BIOS, enter windows ... etc ... Works great but after 30 minutes fix closes without any error message, I'm desperate I did update the bios, I reinstalled windows and nothing. I'm desperate ... please help me. (( ((((( The Temp are OK 45C (
Solved!
Go to Solution.hi Reichtofer,
Your friend is probably right. In this pdf info sheet, the B590 supports the following CPU:
HM77 based models − Intel® Core™ i3
HM77 based models − Intel® Core™ i5
HM70 based models − Intel® Pentium®
HM70 based models − Intel® Celeron®
HM70 CPU/Chipset Compatibility list
HM77 CPU/Chipset Compatibility list
It looks like you really need to change the motherboard to an HM77 chipset for the CPU to work properly.
Also, although the HM77 chipset does support both the Intel Pentium Dual-Core Mobile 2020M, Intel Core i5-3210M and other various CPU on the list above, looking at page 85 of the hardware maintenance manual, it seems like the BIOS is "restricted" to only use the following CPU:
- Link to picture
In this case, there's no official way on how to remove the restriction as this is by design and you may need to do as what your friend suggested.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
After Mavericks Server upgrade: cannot start DNS
Hi,
the upgrade to Mavericks went smooth on my Mac Mini, and also the upgrade of the Server App except on issue. I switched off DHCP an DNS before upgrading, but I cannot turn on DNS again. It will turn off instantly. I deleted the records and reentered all them with no success. I also tried "sudo rm /var/db/.ServerSetupDone" which will run the Server App like the first time, but all settings and my DNS error remain. What can I do? How can I reset DNS settings or all Server App settings?
Thank you
PeterSame problem here on my test server -> DNS turn on and instantly turned off
Solution from raimattern solved the problem
Got this from another list here and that was the solution:
The plist that you need to edit (as root) is /var/db/launchd.db/com.apple.launchd/overrides.plist
There will be a value in there for org.isc.named.
Set that Disabled value to False. -
Noisy fans on iMac after Apple replaced hard drive
My hard drive was replaced by an Apple contractor last week. Immediately after the replacement the fans started running hard while working and would wake itself from sleep mode to run. I watched the Activity monitor as someone suggested, there are no "runaways." I zapped PRAM, and SMC multiple times. No change. Finally tonight I ran the hardware test and got the error message 4SNS/1/40000000:TH00-9.000. I then went to the support community and found that this relates to the hard drive and circuitry for fan sensors. It did not do this before. I will call the person at Apple that was my contact for the replacement on Monday. Just trying to verify that I have interpreted error message correctly.
Apple has basically replaced my entire computer: 2nd new hd, new fan in the right side (ODD I believe), new logic board and CPU and it's still noisy and will not respond to the Energy Saver sleep preferences. I downloaded smcFanControl software and that indicates that ODD temp is 106F and 3415 rpm with nothing happening in the drive. I decided to work drive and imported a bunch of photos to iPhoto. ODD got a little warmer but fan speed never changed. What now? How do I get to a high level Apple repair rep. I am so annoyed by this whole thing. I should have left the hard drive alone until it died and not responded to the recall.
-
Re Post: Http server cannot start after running the following JSP
Hi,
I have 9iAS 1.0.2.2 and it has been working fine.
My http server was running fine until I ran the following Jsp. Now I cannot start the Http server at all.
I check the Oracle home and the path and make sure they match (i.e. if my Oracle Home is iSuites, I have the PATH variable: c:\oracle\isuites\bin as the 1st one. And I reboot the system after I changed the Oracle Home, check the PATH variable etc.)
I also check the oci.dll files, and I have the oci.dll file in the following directories:
c:\oracle\ora81\BIN 87KB
c:\oracle\806\BIN 38KB
c:\oracle\iSuites\BIN 87KB
I check the Registry (regedit) and found that I have ORACLE_HOME_KEY for ora81 home, iSuites home, but not
806 home. And there are oracle.key files in c:\oracle\ora81\bin, c:\oracle\806\bin, c:\oracle\isuites\bin .
The contents of oracle.key in c:\oracle\ora81\bin and c:\oracle\isuites\bin are correct (i.e. "Software\ORACLE\HOME0" "Software\ORACLE\HOME2" respectively.) However, the content in c:\oracle\806\bin is "Software\ORACLE" .
Will this be a problem because there is no corresponding ORACLE_HOME_KEY for 806 in regedit?
OR
the OCI.DLL file is corrupted in one of the above directory.
Below is the JSP code that I ran. Before that, my HTTP server is started correctly.
I really appreciate if someone could give me some pointers about this.
I also suspect that when the HTTP server was brought down for some reasons and it was not a clean shutdown.
So how can I shutdown the http server cleanly before restarting that?
Thanks;
Kelly.
<%@ page language="sqlj"
import="sqlj.runtime.ref.DefaultContext,oracle.sqlj.runtime.Oracl
e" %>
<HTML>
<HEAD> <TITLE> The SQLJQuery JSP </TITLE> </HEAD>
<BODY BGCOLOR="white">
<% String empno = request.getParameter("empno");
if (empno != null) { %>
<H3> Employee # <%=empno %> Details: </H3>
<%= runQuery(empno) %>
<HR><BR>
<% } %>
<B>Enter an employee number:</B>
<FORM METHOD="get">
<INPUT TYPE="text" NAME="empno" SIZE=10>
<INPUT TYPE="submit" VALUE="Ask Oracle");
</FORM>
</BODY>
</HTML>
<%!
private String runQuery(String empno) throws
java.sql.SQLException {
DefaultContext dctx = null;
String ename = null; double sal = 0.0; String hireDate = null;
StringBuffer sb = new StringBuffer();
try {
dctx = Oracle.getConnection("jdbc:oracle:oci8:@", "scott",
"tiger");
#sql [dctx] {
select ename, sal, TO_CHAR(hiredate,'DD-MON-YYYY')
INTO :ename, :sal, :hireDate
FROM scott.emp WHERE UPPER(empno) = UPPER(:empno)
sb.append("<BLOCKQUOTE><BIG><B><PRE>\n");
sb.append("Name : " + ename + "\n");
sb.append("Salary : " + sal + "\n");
sb.append("Date hired : " + hireDate);
sb.append("</PRE></B></BIG></BLOCKQUOTE>");
} catch (java.sql.SQLException e) {
sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n");
} finally {
if (dctx!= null) dctx.close();
return sb.toString();
%>I had this problem and the pkgchk mentioned above helped to get the admin server going (thanks!) but I could not run the admin console. I saw:
Exception in thread "main" java.lang.UnsupportedClassVersionError: org/GNOME/Accessibility/JavaBridge (Unsupported major.minor version 49.0)
It turned out that something (I suspect the patch) had replaced my java1.5.0_06 binary with a java1.4.2_03 binary - but left the java1.5 directory structure alone! i.e. looking in /usr/jdk would have indicated that java1.5 was installed, but when I ran jdk1.5.0_06/bin/java -version , it reported java version "1.4.2_03". I was unimpressed.
I ended up removing all the SUNWj5* packages and reinstalling them and then I could start the admin console.
Now to find out what other damage this patch might have caused..... -
Kded crashes on amarok quit in gnome, cannot start jack after
I'm running amarok in gnome and it works fine except that I'm getting the KDE crash handler telling me that kded has cashed just after I quit amarok. And amarok seems to keep holding onto hw:0, so I cannot start jack after. Which prosess could I kill to make jack start?
ThanksZestyTang:
If you import the modified folder you'll just end up with duplicates as the ratings and other metadata will be lost. It's starting over from scratch.
alexkess:
Since it works OK in the other account it might be a preference file other than iPhoto's. Try the following:
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
5 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
OT -
Satellite M30: Power Saver options missing after motherboard replacement
Hi all,
I've just received my laptop back from the service center, and unsurprisingly they stuffed up a feature that used to exist!
I had taken my laptop (M30 1.7GHz Special Edition) to the repair center for a defect and they informed me that the motherboard needed to be replaced. I received the laptop back a couple of days ago and I immediately noticed the laptop getting overheated, the fan did not turn on as frequently as it used to when setting the profile to "Full Power".
After hours of investigation, I noticed that a few options that used to exist in the Toshiba Power Saver does NOT exist anymore. Thus, I feel my laptop is running as in battery optimised even though it's set to full power.
As I said, the fan is not turning on as frequently, leading to the laptop getting overheated. While the fan used to be almost constantly ON on full power prior to the replacement of the motherboard.
Here's how the power saver used to look like "prior" to taking the laptop to the repair center:
http://www.foxpop.com/imre/2006/toshibatecram3review/toshibapowersaver1.gif
And here's how the power saver looks like now, after the replacement of the motherboard:
http://www.ixbt.com/portopc/toshiba-satellite/power.png
with the CPU processing speed maximum of 3, instead of 4.
Notice how I'm now missing the "CPU control method" option, and I'm unable to set the processing speed to more than level 3!
The cooling method does not seem maximum performance to me either, due to the symptoms I mentioned above.
Any idea on why that might have happend? Please note that I used the system recovery CD and returned everything to the factory settings, still no luck. I'm sick and tired of going back to their lousy repair center. If someone can point out the problem I will be very grateful.
P.S. I'm using version 7 of the power saver, BIOS verion 1.4 (original)
Thanks in advance.Hi
I wonder why you did not contact the service guys again.
After the reparation everything should works fine and if the notebook does not run properly you should immediately report it! In my opinion its a warranty claim.
However, in my knowledge after the motherboard replacement the micro code on the board must be updated therewith the CPU could run with full performance.
What CPU speed appears in the windows system?
Im not 100% sure if the missing microcode update is responsible for your problem but I would recommend asking the ASP for opinion. -
I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
2. iPad 2, 16GB White with Sr. No.DL*******KPH
Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
Thanks & Regards
A K Vij
<Personal Information Edited by Host>http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps -
Satellite Pro A10: New Atheros/Askey WLan card but 'This device cannot start' code 10
Hi there,
I have a Satellite Pro A10 and have purchased an internal mini pci wireless adapter. The following information is displayed on my card:
Askey WLL3070-D4(MOW)
Atheros AR5BRB-43
I installed the card, hooked up the ariel's and turned the laptop on...the switch at the front now lights up and windows xp finds the new ethernet adaptor. My problem is this...
No matter what driver i install (and ive tried every Askey/Atheros etc driver from the first 20+ pages of yahoo/google) the card installs fine but then in device manager has a yellow ! next to it and says This device cannot start (code 10)
I'm really stumped. I have some more ram coming in a few days at which point i shall be installng Vista which im hoping sorts my problems out but does anyone have any ideas?
I've yet to find a driver which specifically refers to the AR5BRB or the model number WLL3070-D4.
Does anyone have a location for a driver etc?
thank youHi
I use always this page for WLan driver update:
http://aps.toshiba-tro.de/wlan/
This is a Toshiba WLan driver portal and there you can find all necessary WLan drivers
Ciao -
Ts-l663b cd/dvd "device cannot start,code 10" after uppgrade from vista to windows 7 home
Compaq CQ60-216DX
Hi,I've upgraded from Vista to Windows 7 Home and now the CD drive is missing and displays an error code"10" DEVICE CANNOT START, under Device Manager.
Looked for updated drivers on HP Support,there are none for CD drive.
Cannot roll back driver,greyed out.
Used Restore to revert back 2 months and still no progress. Removed recently installed software from HP(C5280) printer as well.
Immediately after upgrade,CD drive worked fine. Even loaded music into iTunes.
I'm at a loss. Any ideas?
Thanks
Fabe
This question was solved.
View Solution.Hi, Fabe:
Try running the MS automated fix-it tool for DVD's
http://support.microsoft.com/mats/cd_dvd_drive_problems/
Paul -
Http server cannot start after running the following JSP
Hi,
I have 9iAS 1.0.2.2 and it has been working fine.
My http server was running fine until I ran the following Jsp. Now I cannot start the Http server at all.
I check the Oracle home and the path and make sure they match (i.e. if my Oracle Home is iSuites, I have the PATH variable: c:\oracle\isuites\bin as the 1st one. And I reboot the system after I changed the Oracle Home, check the PATH variable etc.)
I also check the oci.dll files, and I have the oci.dll file in the following directories:
c:\oracle\ora81\BIN 87KB
c:\oracle\806\BIN 38KB
c:\oracle\iSuites\BIN 87KB
I check the Registry (regedit) and found that I have ORACLE_HOME_KEY for ora81 home, iSuites home, but not
806 home. And there are oracle.key files in c:\oracle\ora81\bin, c:\oracle\806\bin, c:\oracle\isuites\bin .
The contents of oracle.key in c:\oracle\ora81\bin and c:\oracle\isuites\bin are correct (i.e. "Software\ORACLE\HOME0" "Software\ORACLE\HOME2" respectively.) However, the content in c:\oracle\806\bin is "Software\ORACLE" .
Will this be a problem because there is no corresponding ORACLE_HOME_KEY for 806 in regedit?
OR
the OCI.DLL file is corrupted in one of the above directory.
Below is the JSP code that I ran. Before that, my HTTP server is started correctly.
I really appreciate if someone could give me some pointers about this.
Thanks;
Kelly.
<%@ page language="sqlj"
import="sqlj.runtime.ref.DefaultContext,oracle.sqlj.runtime.Oracl
e" %>
<HTML>
<HEAD> <TITLE> The SQLJQuery JSP </TITLE> </HEAD>
<BODY BGCOLOR="white">
<% String empno = request.getParameter("empno");
if (empno != null) { %>
<H3> Employee # <%=empno %> Details: </H3>
<%= runQuery(empno) %>
<HR><BR>
<% } %>
<B>Enter an employee number:</B>
<FORM METHOD="get">
<INPUT TYPE="text" NAME="empno" SIZE=10>
<INPUT TYPE="submit" VALUE="Ask Oracle");
</FORM>
</BODY>
</HTML>
<%!
private String runQuery(String empno) throws
java.sql.SQLException {
DefaultContext dctx = null;
String ename = null; double sal = 0.0; String hireDate = null;
StringBuffer sb = new StringBuffer();
try {
dctx = Oracle.getConnection("jdbc:oracle:oci8:@", "scott",
"tiger");
#sql [dctx] {
select ename, sal, TO_CHAR(hiredate,'DD-MON-YYYY')
INTO :ename, :sal, :hireDate
FROM scott.emp WHERE UPPER(empno) = UPPER(:empno)
sb.append("<BLOCKQUOTE><BIG><B><PRE>\n");
sb.append("Name : " + ename + "\n");
sb.append("Salary : " + sal + "\n");
sb.append("Date hired : " + hireDate);
sb.append("</PRE></B></BIG></BLOCKQUOTE>");
} catch (java.sql.SQLException e) {
sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n");
} finally {
if (dctx!= null) dctx.close();
return sb.toString();
%>Hi Jim,
I have the same environment with almost similar problem, no IIS services being started, but HTTP_Server still failed to start. Below log:
+10/09/28 23:35:04 Start process+
+[Tue Sep 28 23:35:06 2010] [warn] pid file c:/oracle/frhome_1/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous+
Apache run?
ap_spawn_child: Bad file descriptor
Couldn't fork child for piped log process
Regards,
Chai
Edited by: user13350226 on Sep 28, 2010 9:14 AM
Maybe you are looking for
-
Why will iTunes Match work on my iPhone, but not on my MB Pro?
I have an annual Match subscription which I downloaded onto my MacBook. I then enable Match on my iPhone and it works properly. However, when I try to turn Match ON on my MacBook, it displays an ad asking me to subscribe again. I can play the iTun
-
Windows 8.1 - Update consideration, resources, and known issues - You lost a customer
I bought my Ideapad U460s 2 years ago. Lenovo appears to be failing to provide support for Windows 8. Ridiculous. You have lost a customer and I will share this info with friends and family. There have been no updates to the drivers or other softwar
-
I can't transfer music to my ipod nano
I can't transfer music from my library onto my ipod nano
-
Hard Drive Died, Lost Itune Music..
I lost my hard drive and had to replace it and updated to win7. Now I no longer have all my music on itunes. But everything is on my ipod touch, can I just plug it in and the new itunes will download my library from the ipod? Help...
-
Revision: 19866 Revision: 19866 Author: [email protected] Date: 2011-01-21 10:05:44 -0800 (Fri, 21 Jan 2011) Log Message: Set delivery mode to PERSISTENT for JMS destinations that have durable set to true. If messages aren't persistent they won