After creating Peopletools 8.52, FSCM 9.0 Demo PSSTATUS table shows 8.48

Hi
I am building the new demo environment for Finance.
PeopleTools 8.52
FSCM 9.0
on unicode database with Demo option. But running the datamover scripts, PSSTATUS table still shows 8.48.
Any Ideas ?
Thanks,
Sarathy K

Actually the reason why it is showing 8.48 is because FSCM 9.0 have application database version 8.48 and you are installing peopletools 8.52 so you need to update your database setup by running some peoplesoft delivered sql scripts.
Refer the installation guide for Peopletools 8.52 http://docs.oracle.com/cd/E26530_01/psft/acrobat/PeopleTools_8.52_Installation_Oracle.pdf
In chapter 7 the very first topic describes it very well.
In short go to PS_HOME\scripts
and find following scripts...
Required Scripts for Non-Unicode Databases
rel849, rel850, rel851, and rel852
Note. If you are installing a 9.0 or higher application, run rel849n, rel850n,
rel851n, and rel852n instead.
Required Scripts for Unicode Databases
rel849u, rel850u, rel851u, and rel852u
Note. If you are installing a 9.0 or higher application, run rel849un, rel850un,
rel851un, and rel852un instead.
Gaurav

Similar Messages

  • Network Problem After Creating Database

    Hi,
    We install Oracle 11g on Windows 2008 server. Everything is working fine till the installation of Oracle software. After creating the database when we restart server the network cable shows a unplug for 20 miniutes.
    If we disable all the Oracle service than everything goes fine.
    Please Suggest.
    Thanks and Regards
    Sarfaraz Zomberkar

    This is an interesting problem. Please provide a little more information.
    * When you state Oracle 11g, exactly which release version: 11.1.0.6, 11.1.0.7, 11.2.0.1, or 11.2.0.2 - did you install the 32 bit Database software or the 64 bit Database software?
    * Which options were selected during the installation, and did you tell the installer to create a database during the installation?
    * Exactly which Windows 2008 server version: R1 or R2 - and is the operating system 32 bit or 64 bit?
    * How much memory is in the Windows server?
    * How many network cables are connected between the server and a network switch(es) - you will probably need to look at the back of the server to determine this answer?
    * What are the exact names of the Oracle services that you had to shut down - most likely, the Startup Type of those services are set to "Automatic"
    * Have the appropriate network person take a look at the log of errors on the network switch that is connected to the server - there is a chance that the network switch sensed a problem, such as excessive transmission errors, and shut down the network port to prevent a broadcast storm or a similar problem.
    * Have the appropriate person check the Windows event logs. Do those logs identify the reason why the network port went down?
    Charles Hooper
    Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • Use of "DBA_OBJECTS" in "AFTER CREATE" Trigger

    Hi,
    We would like to store some extra information about our objects we have in the database. To do so we tought of the idea of creating a 'documenting' table containing an object_id that references to the object_id from the view dba_views.
    Now we want to automatically create a new record in our documenting table when a new object is created, in the first stage this should only contain the object_id
    To accomplish this we are using an 'AFTER CREATE' trigger, but when this trigger fires and the code searches for the new object_id in dba_objects, it does not return any records and generates an error. Likely because when the trigger is executed, the view is not yet updated?
    create or replace
    TRIGGER TRG_TEST
    AFTER CREATE ON SCOTT.SCHEMA
    DECLARE
    tmp VARCHAR2(50);
    BEGIN
    dbms_output.put_line(ora_dict_obj_name);
    select object_id
    into tmp
    from dba_objects
    where object_name = ora_dict_obj_name;
    dbms_output.put_line(tmp);
    END;
    Error report:
    ORA-04088: Fout bij uitvoering van trigger 'SCOTT.TRG_TEST'.
    ORA-01403: Geen gegevens gevonden.
    ORA-06512: in regel 6
    04088. 00000 - "error during execution of trigger '%s.%s'"
    *Cause:    A runtime error occurred during execution of a trigger.
    *Action:   Check the triggers which were involved in the operation.
    It's in dutch, so I'll have a go at translating:
    Error report:
    ORA-04088: Exception while executing trigger 'SCOTT.TRG_TEST'.
    ORA-01403: No data found
    ORA-06512: in rule 6
    04088. 00000 - "error during execution of trigger '%s.%s'"
    *Cause:    A runtime error occurred during execution of a trigger.
    *Action:   Check the triggers which were involved in the operation.
    Does anyone have an idea of how I can accomplish what I'm trying to do here.. Or maybe something I'm doing wrong?
    Thanks in advance!
    Davy

    What is "ora_dict_obj_name" defined as?
    Another option might be to setup a DBMS_SCHEDULER job to run the following insert
    firstly though, create the following table ;
    create document_table as (select * from dba_objects where rownum < 1)and then setup a DBMS_SCHEDULER job to run the following:
    begin
      insert into document_table
      (select dbo.*
       from   dba_objects    dbo
             ,document_Table dtb
       where  dbo.Object_ID = dtb.Object_ID(+)
       and    dtb.Object_ID is null);
       commit;
       exception
        when others then
          rollback;
          -- log a message somewhere with the error, i.e. SQLERRM
    end;
    /Note, I specified all columns, but you'll probably specify explicitly which column you require, in which case the CREATE table would change as well.
    Then you won't have a need for any trigger, and can better manage when you want your documentation to be updated.
    Another option might be to use COMMENT, which can be used on tables, views, materialized views, but won't cover all objects
    to the extent you might want.
    SQL> desc emp2
    Name                                                                                                  
    EMPNO                                                                                                 
    JOB                                                                                                   
    START_DATE                                                                                            
    SAL                                                                                                   
    DEPT                                                                                                  
    END_DATE                                                                                              
    SQL> comment on column emp2.sal is 'Existing Salary of employee as paid at most recent month end';

  • Calling a page after creating a primary key?

    Hello,
    I have a form on a table with a create button on it. The primary key is created after I click the CREATE button, and brings me back to the report which shows my new record. Everything is fine here.
    Now, I want to branch to a new page (after processing), while passing the value of my new primary key to this page. But it seems that this value is null (if I look in the URL there's no value)
    For example, I need to create a new Client, and pass the primary key of my client to a new page. But it doesn't work... anybody can help me?
    Thanks,
    Mathieu

    Never, EVER use the current value + 1!!! You will at some point, run into a collision, where two records are trying to use the same primary key value!
    If you are using a surrogate PK, then you may want to consider using an Oracle sequence and trigger to populate that value. If you create a simple table via SQL Workshop, APEX will create not only a table, but the associated sequence and trigger; have a look at that if you have not seen this in action.
    If you prefer to not use a trigger, then yes, you can have a computation that sets the value of P4_NOCLIENT to the next value of the sequence - NOT the current value + 1. Once it's set in APEX session state, the rest is pretty simple.
    Thanks,
    &#150; Scott &#150;
    http://spendolini.blogspot.com/
    http://sumnertech.com/

  • DSO activation problem after creating the secondary indexes

    Hi,
        I am facing the problem with DSO activation after creating the secondary indexes.
    •  Compared with Info Cubes there is no functionality available which allows dropping and recreating a secondary index before/after the data activation.
    As a workaround I can write a simple report which drops and creates the indexes on database level.
    By using a process chain, we can simply insert the drop index report before data activation and the create index report after the data activation process.
    Can any body help me step by step procedure or Material to write the programs for delete index and create index reports on DSO object?..
    Thanks in advance for your help.
    Thanks & Regards,
    Bala

    hi,
    in BI if you are using the dso for reporting then you can simply chk the settings of dso for SID generation.
    no need to create the indexes or delete it.
    if the dso is not used for report then no need to use indexes.
    Ramesh

  • Bug report: Naming a Bin after creating it with drag'n'drop

    There seems to be a small bug when giving a newly created bin a name after creating it by drag'n'drop of several clips onto the "New Bin" icon. 
    To reproduce:
    Select some clips in your project browser
    Drag them onto the New Bin button
    A new bin is created with the clips in it
    - the bin name for it appears to be selected, and editable - just as if you had created a new empty bin by clicking the New Bin button
    - type in a new name - it accepts the name fine, now press enter.
    - your new name disappears, and *now* you are really in the mode to edit the bin name
    - type your name again, and it works.
    Work around:
    When creating new bins by using drag'n'drop of clips onto the New Bin button, first press enter once to enter into the proper edit mode before giving the bin a new name.
    (is there a better place to file bug reports?)
    Version 6.0.1 (014 (MC: 264587))
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.8 GHz
      Number Of Processors:          1
      Total Number Of Cores:          4
      L2 Cache (per core):          256 KB
      L3 Cache:          8 MB
      Memory:          8 GB
      Processor Interconnect Speed:          4.8 GT/s
      Boot ROM Version:          MP51.007F.B03
      SMC Version (system):          1.39f11
      SMC Version (processor tray):          1.39f11
    OS X 10.6.8

    Er, just answered my question about bug reports by reading the "read this before posting" link above
    But I'll leave this here for the work-around in case anyone else needs it.

  • How to save report in PersonalCategory  after creating it using java panel?

    Hi,
    Anybody knows How to save report in PersonalCategory  after creating it using java panel?
    I dont want to save it in public folder. I want to save report (webi) in user's personal category.
    can anybody send me source code?
    It will help me a lot.
    Thanks in advance
    Amol Mali

    Hi teda,
    i'm assuming that you have seen my post that i did successfuly save report in user's personal category.
    Actually the report is created in webi java panel using RE SDK and  is saved in Report Sample Folder then i'm saving it in user's personal category by following code
    string query = "Select SI_PERSONAL_CATEGORIES From CI_INFOOBJECTS Where "
                         + "SI_INSTANCE=0 And SI_ID=" + reportID;
                    InfoObjects infoObjects = infoStore.Query(query);
                    InfoObject infoObject = infoObjects[1];
                    Webi wreport = (Webi)infoObject;
                    ObjectRelativeIDs personalIDs = wreport.PersonalCategories;
                /personalIDs.Add(Convert.ToInt32(categoryID));
                   infoStore.Commit(infoObjects);
    But the report is presents in the Folder also and in user's personal category also.
    I dont want the report to be in the folder (Report Sample) if i saved it in user's personal category.
    How can i do that?
    any idea.
    Please help me.
    Thanks in advance
    Amol Mali
    Edited by: amol mali on Jan 9, 2009 7:55 PM

  • SUBMIT an ABAP report after creating the WI but before completion of WI.

    Dear All,
    I am having an activity which sends the approval work item.
    Now my requirement is to SUBMIT an ABAP report after creating the WI but before completion of WI.
    I can not call this report before approval activity because i need to pass this WI ID to this report.
    Please suggest some way to solve this.
    Regards,
    Amar

    Hello,
    You could create a 2-from-2 fork and put the workitem in one branch and the report in the other. Have the report branch wait 1 minute and then read the workitem id from the other branch.
    What is the purpose of this report? Why does it need the workitem id?
    regards
    Rick Bakker
    hanabi technology

  • Billing document should not be cancelled after creating return sales order

    Hi All,
    Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
    Sudheer.

    Hi,
    In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
    Check and confirm.
    Regards,
    Ravi Duggirala

  • HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

    After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

    Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
    I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
    The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
    I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

  • How to get a second page in a form letter report after create it by Wizard

    How to get a second page in a form letter report after create it by Wizard
    i've built a report by wizard with a sql-Query
    the sql give me back for example 3 dataset
    and the report prints 3 pages
    dataset 1 - page 1
    dataset 2 - page 1
    dataset 3 - page 1
    thats ok,
    but now I need a second page per dataset ( with only a text )
    so that the report should print 2 pages per dataset
    dataset 1 - page 1 ,page 2
    dataset 2 - page 1 ,page 2
    dataset 3 - page 1 ,page 2
    It's not really clear for me, what to do, to create the second page
    any help ?

    .... found answer in other forum

  • Mac OSX, 10.7.5, LR 5.6  After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it.  Why is it doing this?

    Mac OSX, 10.7.5, LR 5.6  After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it.  Why is it doing this?

    I am experiencing Mavericks failing to copy subdirectories from usb sticks, I am backing up game saves from a console. Both sticks I use are fine, same permissions of course since the console wrote the files. Sometimes it copies, sometimes it doesn't. It seems to be related to the mounting process.
    Thank God Apple hasn't (yet) broken bash.

  • After creating a new slideshow I export it with the  setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not  as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

    After creating a new slideshow I export it with the  setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not  as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

    DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good.  You should probably create your .mov in DV format to best match the DVD format

  • Error after creating a struts portlet in weblogic 8.1 SP 5

    Hi,
    I am using weblogic 8.1 SP 5, to develop an struts-portlet.
    I tested my struts application and it is working fine.
    I have one action i.e firstAction and 2 jsp's in my struts application.
    The action just forwards to the one jsp through struts-config.
    However, when i try to start the server after creating the struts-portlet i get the following error:
    The source of this error is com.bea.netuix.nf.UIControlException: For portlet [portlet_1_1], could not retrieve a result for the given action [firstAction] in the given PageFlow: [null]. at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:365) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:443) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:718) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:730) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:730) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:730) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:730) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:730) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:730) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:730) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:730) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender
    Please Help !!!

    Hi,
    Even I am facing the same issue could any body help me out to solve this issue.

  • After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

    After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

    You have two separate questions here...
    To get all your music into one playlist, select Music in the sidebar and click the Songs view at the top. Then, highlight all the songs and drag them into your playlist.
    I don't know if it's possible to download all Purchased content (or do you mean iTunes Match content?) at once; try a few Google searches.

Maybe you are looking for