After CS4-CS6/CC upgrade PUT is intermittent

I recently upgraded from CS4 to CS6/CC. I exported my sites from CS4 and imported them into the new version. All works as it should except when it comes to transferring files from local to remote (and possibly vice versa, but I don't do that much).
I use a Local/Network connection and often times when I explicitly PUT a file, the application appears to execute as requested but when I check, the remote file is unchanged. If I go back to the CS4 version it works as required - every time.
Has anyone else seen this? Is there are fix?
Thank you for your kind consideration.

This has lately become the bane of my existence!
I had previously followed all the recomendations given at:
http://helpx.adobe.com/en/dreamweaver/kb/error-uploading-or-downloading-files.html#main_an chor3
But still, no go.
Using your suggestion of utilizing the "expanded ftp screen" I was able to upload a file.
May have to go back to MX4!

Similar Messages

After 10.6.2 upgrade mac mini intermittent wifi

Mac Mini I bought in aug was working perfectly until i upgraded to 10.6.2 after that I can see if connects to my airport but if does not get to the internet. When diagnostics come up it shows RED for internet and ISP and green for wifi and airport. All my other Macs (imac, macbook) work fine.
help!

I did have initial wifi connectivity problems immediately after installing Snow Leopard on my Mac Mini Core 2 Duo, but these were fixed by creating a "new" location. My wifi connection has been stable ever since using a Cisco Linksys router.
However in an attempt to get a stronger wifi signal at my Mini I am trialling an Edimax wireless 802.11n Access Point set in "Universal Repeater" mode.
The result of using this, which sits near the Mini in the same room, is a wifi signal strength of -39 dBm, whereas the signal strength from the upstairs Cisco router is only -67 dBm. The signal strength right beside the Edimax is a wonderful -17 dBm.

I got CS4 software. When the first time i install, i chose the normal installation content. Then I found that there was no photoshop on the start menu. After that I try to put the disk into the notebook again and find that there is no photoshop listed on

I got CS4 software. When the first time i install, i chose the normal installation content. Then I found that there was no photoshop on the start menu. After that I try to put the disk into the notebook again and find that there is no photoshop listed on the "installation list"

download the cs4 design premium installation files and install ps using them,
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HP 15-d030nr: What Upgrades Do I Need To Make In Order To Be Able To Use Adobe After Effects CS6?

HP 15-d030nr, what upgrades do I need to make in order to be able to use adobe after effects cs6?
I installed Adobe After Effectss CS6 because I was told by HP Support that it would still work; it doesnt. It is very slow, and locks up bad. What upgrades do I need to do, or am I looking at having to go buy another labtop? Also, can I do these upgrades myself - at what cost?
**HP 15-d030nr**
Hardware
Product Name 15-d030nr
Product Number F5X99UA
Microprocessor 2.0GHz Intel Pentium N3510 Processor
Microprocessor Cache 2MB L2 Cache
Memory 4GB DDR3L SDRAM (1 DIMM)
Memory Slots 2 user accessible
Video Graphics Intel HD graphics
Display 15.6-inch diagonal HD BrightView LED-backlit touchscreen display (1366x768)
Hard Drive 500GB 5400RPM hard drive
Multimedia Drive SuperMulti DVD burner
Network Card 10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity 1x1 802.11b/g/n WLAN
Sound HD Audio with stereo speakers
Keyboard Full-size island-style keyboard with numeric keypad
Pointing Device Touchpad supporting multi-touch gestures without on/off button
External Ports Multi-format digital media card reader for Secure Digital cards 1
SuperSpeed USB 3.0
2 Universal Serial Bus (USB) 2.0
1 HDMI
1 VGA (15-pin)
1 RJ-45 (LAN)
1 Headphone-out/microphone-in combo jack Dimensions 1.11 in (H) x 14.88 in (W) x 10.20 in (D) Weight 4.96 lb Power 45W AC adapter
3-cell 31WHr 2.8Ah lithium-ion polymer battery ID Mech Description Front facing HP TrueVision HD Webcam with integrated digital microphone
**After Effects CC (2014) system requirements and language versions Windows**
Intel Core2 Duo or AMD Phenom II processor with 64-bit support
Microsoft Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
4 GB of RAM (8 GB recommended)
5 GB of available hard-disk space; additional free space required during installation (cannot install on removable flash storage devices)
Additional disk space for disk cache (10 GB recommended)
1280 x 1080 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certifi ed GPU card for GPU-accelerated ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
*I also have a 1TB external hardrive*
This question was solved.
View Solution.

Your problem is that the program wants a good video card and a fast hard drive and lots of memory and you have none of the above. If you upgraded the RAM to 8 gigs and installed a solid state hard drive you might make the program useable but the real bottleneck is going to be the Intel HD graphics, which cannot be upgraded.
You do have an open slot to add one 4 gig memory module. This is an easy relatively inexpensive upgrade. See here:
https://www.youtube.com/watch?v=L7FvZ-JduRM
http://www.crucial.com/usa/en/ct51264bf160b
I would try this a step at a time. Next would be the solid state drive. That would cost maybe $150. Post back if you need more help.
If this is "the Answer" please click "Accept as Solution" to help others find it.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

Each camera needs a specific camera raw version (ACR). And each ACR is tied to a specific version of PS. See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

After effect cs6 won't open after i upgrade to 10.9.4

hey there i have mbp 2.4 Ghz Core 2 Duo, 4 gb 1067 ddr3, i recently upgrade to 10.9.4, everything work fine till i open my after effect, first it says
[spoiler=error log]
Last log message was: <140735108784912> <AppDirs> <5> Required Dir =
/Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/Required
[/spoiler]
Generating crash log, which may take a few minutes.
i wait and it open a windows that says i can't use this version of application, so i upgrade after effect to 11.0.1 but it doesn't work still say "can't use this version of the application"
can someone help me to fix it?

What exact update are you trying to apply, and how? Give as much detail as possible.

After Effects CS6 upgrade error in mac mavericks

Say hello to everyone.
Now i'm very tired and irritated about upgrading after effects cs6. Because my mac version is mac os x 10.9.5, mavericks so have to upgrade After Effects cs6.
BUT, only upgrade version 11.04 installed, and the others (11.01/ 11.02/ 11.03) still not installed and have an error message : the error code is U44M2P7.
What is this code mean and what should i do next?

If you have 11.0.4 installed, you have everything in 11.0.1, 11.0.2., and 11.0.3
There is no reason to install any update other than 11.0.4

After Effects CS6 Won't Launch After Mavericks Upgrade.

Hi All,
I have seen a few posts regarding this and have scoured the web for few hours looking for answers. So far all I have found are patches from Adobe and their asking that we uninstall and reinstall the app.
None of this has worked so far.
In fact I've gone from an error of "Can't use this version" to adding the patches to now getting "After Effects Cannot Be Opened Because Of A Problem". It goes on to add this...
Check with the developer to make sure Adobe After Effects CS6 works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
Click Report to see more detailed information and send a report to Apple.
Two questions:
1. Is there a fix for this?
2. If not, how can I revert back to 10.8 without losing everything.

Ok, I found one more article talking about upgrading to 11.3 upgrade instead of 11.4(latest). Finaly worked. Hope this helps someone else, this was painful.

Why does PDF Optimizer no longer reduce size after CS4 upgrade?

I've been able to successfully reduce the size of the PDFs created from my Illustrator files for years using Advanced> PDF Optimizer in Acrobat Pro. Upgraded to CS4 last week. Now it seems to have reduced everything, but the files are still huge. When I check Space Audit 96% or more is taken up by "piece information".
I've tried changing the Adobe PDF presets, the Document Raster Effects settings, and outlining all text in Illustrator to see if that made a difference. Nothing. The frustrating thing is i've done this for years with no problem. HELP?!?!

From: Riannosda <[email protected]>
Reply-To: <[email protected]>
Date: Wed, 22 Jul 2009 07:06:34 -0600
To: Pamela Myhre <[email protected]>
Subject: Why does PDF Optimizer no longer reduce size
after CS4 upgrade?
Hi, I've found the solution because today it happened to me as well.
Just go to "PDF Optimizer", then click to "Discard user data" and finally to
"Discard private data from other applications": in this way you delete any
information left by Illustrator and your file's size will get reduced.
It works.
Good luckThanks so much! That works like a charm!!
Pamela

I am using the DSGN CS4 CT now upgrade to DSGN CS5.5 MAC UPG EPA PROMO APAC CS4 (After installed CS5

I am using the DSGN CS4 CT now upgrade to box set DSGN CS5.5 MAC UPG EPA PROMO APAC CS4 (After installed CS5.5 s/n works but the old one CS4 s/n not work) Pls let me know the solution sooner.

So your CS4 serial number is not accepted when you try to enter it as a qualifying version?

From CS4 to Photoshop CS6 by upgrading ???

Is it possible to pass from Photoshop CS4 to Photoshop CS6 by upgrading ???

CS5 and CS5.5 are the only qualifying versions for upgrading to CS6.
Gene

I noticed after I did the 5.1 update to my iPhone 4S it now says I'm on the 4G network... will this upgrade put all iPhones on the 4G network?

I noticed after I did the 5.1 update to my iPhone 4S it now says I'm on the 4G network... will this upgrade put all iPhones on the 4G network?

Depending on what source you read there are no 4G networks anywhere in the world (the definition is 100 Mbps or better). However, that doesn't stop carriers from calling somewhat more advanced networks from claiming they are "4G". Thus, Verizon calls their LTE network 4G. At 7-15 Mbps it's certainly better than their lame EVDO, but it isn't true 4G. AT&T calls their HSPA+ 4G, and I have seen up to 7 Mbps on my 4S, which makes it faster than their 1.5-2Mbps HSDPA. But it isn't LTE (which AT&T is deploying also and isn't compatible with the iPhone). So the short answer is that it's just market positioning.

Problem with Adobe After Effects CS6 on Windows 8.1 PRO

Hi Adobe Systems guys, I would like to know when the error will have the solution presented Adobe After Effects CS6 (Latinoamerican Spanish Version) running Windows 8.1 PRO, and throwing the following error.
I've tried the latest available update 11.0.3 but does not correct the problem. I wonder when will be ready the solution because with Illustrator CS6 also was the same but with the solution described in this page, http://helpx.adobe.com/illustrator/kb/illustrator-does-not-start-windows-81.html was solved perfectly.
I appreciate prompt as we need urgent help to use the software in its Spanish version as was originally purchased. thanks

That such a friend, for I tell you that none of their solutions is an option for me because:
• Wait a couple of months with no after effects in the hope That a patch will come ... someday
R:/ The problem is not mine, is problem of Abode and therefore investing heavily in the creative suite CS6 and for that to be an option.
It's not fair to have to beg for a solution.
• Upgrade to CC and enjoy all the latest features
R:/ It is not possible , because we will not spend more money than they already invested in Suite CS6
• Use After Effects CS6 in English
R:/ It is not possible as the staff in charge of managing this program if it is not handled in English and therefore bought the suite in Spanish .
• Roll your computer back to Windows 8 instead of 8.1
R:/ It is not possible as it is known all Windows 8.0 failures we have put in 8.1 PRO .
I do not understand is that if Adobe Illustrator had the same problem and it was fixed within a couple of days getting the patch , why not do the same with After Effects CS6 in Spanish . All users of this suite CS6 and buyers deserve respect and prompt solution to the problems that are the fault of Adobe.

After Win 8.1 upgrade, Acrobat 9 Pro suddenly won't run

I have Web Premium CS4, and Acrobat Pro v. 9.5.5. I bought a new Window 8.0 computer 90 days ago, installed the suite, activated, and everything ran fine. Yesterday, I upgraded to Win 8.1. Now, when I open Acrobat Pro, I get a pop-up message saying that it was installed as part of a suite, and to open another program in the suite first. When I click OK, Acrobat closes. I have tried opening nearly every other program in the suite (Bridge, Flash, Photoshop 64-bit), they run OK, but Acrobat will still not run, and there are no activation messages. I checked my Adobe account, and my version of Acrobat Pro 9 is still listed, with serial number.
I'm very disappointed, as I use Acrobat Pro quite a bit, and currently it will not stay open at all. Other than telephoning Adobe for help (no free support # listed), or using on-line chat (no link available), or e-mailing them (no address listed)...what can I do to "activate" it?
I've tried opening Acrobat Distiller and get the same message, but when I close it, I see a brief flash of what appears to be an input box with activation stuff. It only appears for half-a-second, so I cannot do anything with it.

Bill, thanks for that info. I don't think I would ever expect to get any support from Adobe on these programs, since I stopped buying revisions after CS4. I was surprised that I was even able to successfully install the CS4 Web suite onto Win 8.0, and Win 8.1 probably adds another couple hundred million lines of redundant code from our friends in Bill Gates-Land.
However, my A-Pro9 problem did resolve unexpectedly! I tried opening all the suite's programs, one at a time, and then Acrobat, with no luck. Then I realized that the suite had installed both 64-bit and 32-bit versions of Photoshop (I use the 64-bit version) onto my new 64-bit computer. So, when I opened the *32-bit Photoshop* for a minute, closed it, and re-opened Acrobat 9, it went back to working normally. I'll take it!
--Eugene

After Effects CS6 - Very slow workflow

Hi everyone, my first writing in adobe forums. I've contacted 3 adobe support agents, but I didn't get much help from them. Recently I switched from PC to Mac Pro, having Adobe Production Premium 5.5 for Windows and now upgraded to Adobe Production Premium 6.
First I tried a trial of After Effects CC and I was surprised how slow it is. Now I'm using AE CS6 full version and it's a bit better, but still pretty dang slow. (The video I made for adobe support explaining the problem is here: http://www.youtube.com/watch?v=-jsZZpH0vYU )
To try to cut long story short. In the video adove, I've created couple of text layers and couple of shape layers. Made them 3D. Added a camera too. When I move the camera, everything is refreshing extremly slow. It's like you're having 100 3D layers and very busy scene,
and actually it's few most simplest 3D layers. The agents from adobe support told me to switch to half rez, or draft mode etc. But the problem is, I do not want to work in half rey, draft mode or something similar, with my configuration it should work pretty normal. Never
had these kind of problems in AE CS5.5. I tried everything, updated the software, updated my Mac OS, disabled global cache, even disabled multiprocessing etc. Btw, rendering is okay.
Is this the way CS6 is made? Is it supposed to be slow? Because, literally I got an answer from the agent that AECS6 is designed like that, in other words, to be slow
I really have no idea anymore how to make this work. I would like to get back to my lovely 5.5, but I only have license for Windows. If you guys could help me, I would really appriciate that.
I use:
* Mac Pro
* 2 x 2,4 GHz 6-Core Intel Xeon
* 64 GB 1333 MHz DDR3
* ATI Radeon HD 5870 1024MB
* 2TB HDD
* 2 x Apple LED Cinema Display 27"
* After Effects CS6 - 11.0.2.11
* Mac OS X 10.8.4
* I haven't had this problems ever before (using ae for quite some time)
* At the moment no 3rd party plugins installed
Thanks!
Mirza

You'll have to get used to creating Ram Previews and using AE's interface in the right way. You should really go through the getting started materials on the home page and take a look at the FAQ. AE is a layer based pixel calculating beast that will do a lot more to a movie at 60 frames per second than Photoshop will do on to a still image. After Effects is essentially Photoshop for movies with a lot more options.
If you want to smoothly drag through the timeline and playback multiple cuts with simple transitions and two or three layers then use Premiere Pro. If you need to use 20 layers and 60 effects to create a stunning composite or motion graphics effect then you're stuck with rendering at just about any price point.

After CS4-CS6/CC upgrade PUT is intermittent

Similar Messages

Maybe you are looking for