After Decimal

hi all
i have a culumn range_from number(7,3) with data 35.750
now i want to run query to show the exact value after decimal,
i tried this one
select xyz.RANGE_FROM,
substr(a.RANGE_FROM,instr(a.RANGE_FROM,'.')+1,3)a
from xyz ;
result: 75
but i need the exact figure i.e. 750
How to resolve this issue.
rha

SQL> create table xyz
2 as
3 select 35.750 range_from from dual union all
4 select 12.300 from dual
5 /
Tabel is aangemaakt.
SQL> alter session set nls_numeric_characters = '.,'
2 /
Sessie is gewijzigd.
SQL> select range_from
2       , substr(range_from,instr(range_from,'.')+1,3) a
3       , mod(range_from * 1000,1000) b
4    from xyz
5 /
                            RANGE_FROM A                                        B
                                 35.75 75                                     750
                                  12.3 3                                      300
2 rijen zijn geselecteerd.Regards,
Rob.

Similar Messages

How to get values after decimal point

Hi,
source value is 12345.678 i wana the target side in 12345 in field and 678 in one field.
the source value its not fixed before decimal point value pass to one field and after decimal point value pass to other field
please help to me how to do this one.

Hi Swathip,
You dont need to create 2 UDFs. You just need to create 1 simple UDF which takes one string array as input as usual and it has 2 Resultlist outputs. You need to map this 2 outputs from the UDF to the respective 2 target side fields where the values are to be mapped, one containing the portion before the decimal, and one after the decimal.
I HAVE TESTED THE UDF AND IT WORKS ABSOLUTELY FINE.
THE CODE FOR THE UDF IS AS FOLLOWS:
public void sepDec(String[] num,ResultList wholeNum,ResultList afterDec,Container c)
String part1=null; // Stores the part before the decimal point
String part2=null; //Stores the part after the decimal point
                        if(num[0]!=null && num[0]!=""){
               int index = num[0].indexOf(".");
               part1 = num[0].substring(0,index);
               part2=num[0].substring(index+1, num[0].length());
                     wholeNum.addValue(part1);
               afterDec.addValue(part2);
THIS UDF IS A CLASSIC EXAMPLE WHERE AN UDF HAS 2 OUTPUTS, WHICH IS VERY RARELY SEEN BUT VERY MUCH CORRECT
PLEASE LET ME KNOW IF THIS CODE WAS HELPFUL TO YOU
CHEERS,
BISWAJIT
Edited by: 007biswa on Feb 8, 2011 5:02 PM

How can i retain the trailing zeroes after decimal

how can i retain the trailling zeros after decimal?
values are showing in table like( 4.50,5.00) but i am trying to do some processing with these values then ithe zeroes are truncated like (4.5,5),
how can i get values with zeroes

If the values in the table have trailing zeroes, it's a character type column.
Once you perform operations on them, they're implicitely converted to the number type, hence "losing" trailing zeroes.
To get the trailing zeroes back, you have to convert them back to character data:
TO_CHAR(1.5*3, '90d99')Have fun,
K.

Suppressing zeroes after decimal

Hi
I need to suppress the zeroes after the decimal places in my form output if 00 appears after decimal.
eg 123.00 shd be displayed as 123 .
     123.23 shd be dispalyed as 123.23.
Could anyone help me with this
TIA
Regards

hi Ankur do this way
data: wa_input type i,
      wa_output type i.
wa_input = '1.000'.
CALL FUNCTION 'ROUND'
EXPORTING
    INPUT              = wa_input
IMPORTING
    OUTPUT             = wa_output
EXCEPTIONS
   INPUT_INVALID       = 1
   OVERFLOW            = 2
   TYPE_INVALID        = 3
   OTHERS              = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write:/ wa_output.

Eliminating zeroes after decimal

HI all,
I have a requirement to delete the trailing zeroes after decimal.
It is a interest rate and it is denoted in EUR.
i.e the number is 0,739000 % Internal declaration of this number is in DEC.
the data type is AZINSSATZ.
i want it to be displayed as 0,739 %
How can i eliminate these zeroes?
Thanx in Advance
Regards,
Hamsa Priya

Hi Hamsa Priya,
To remove leading zeros and leading blanks
Please use FM
CONVERSION_EXIT_ALPHA_INPUT Conversion exit ALPHA, external->internal
CONVERSION_EXIT_ALPHA_OUTPUT Conversion exit ALPHA, internal->external
Ex :
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = wf_version
            IMPORTING
              output = wf_version.
Hope this resolves your query.
Reward all the helpful answers.
Regards

Zeroes after decimal getting trimmed after 1:1 mapping of EDIFACT

hi all
i have created 1:1 mapping for XML->EDI.
i took the output from XI and gave it as input.However, in the output of the mapping, the zeroes after decimal are getting deleted.
for example if the input contain 2500.000, the output of the mapping contains 2500.
I want 2500.000 in the output.
Any suggestions as how to overcome the problem?

hi Kai
sorry ..i think i didnt convey properly my prob.
This is what i want.
My scenario is IDOC->EDIFACT using XI.
i did a XI graphical mapping from IDOC ->to->EDIFACT_XML.Here for a particular field i got the output as 2500.000.
Now this EDIFACT_XML is converted into EDIFACt using 1:1 mapping of BIC MD.
When i give 2500.00 as an input to this 1:1 Mapping of BIC MD, the output contains only 2500.
I'm not having problem in XI but in BIC MD.
kindly suggest how i can get decimal output from BIC MD.

Remove 0's after decimal.

Hi,
I have column value which returns values something like 123456.78 . This is sales information. I want the value to be returned something like this.
"123,456". No 0's after decimal. The datatype for field stored in DB is Money.
Can you any one help me here?
Thanks
Vikram

Usually you want to truncate the cents on the presentation at the report level, but not on the query of the data. Consider if you want to add up the values on the report. $5.40 and $3.40 should total to $8.80, which you might display as $9. If you remove
the cents on SQL Server and send the report $5 and $3, you would get a sum of $8, which isn't correct. So it's better to use Visakh16's solution of formatting the number in SSRS, and not in the SQL Server Database Engine. Then the sales numbers are changed,
just formatted without cents.
Rick Byham, Microsoft, SQL Server Books Online, Implies no warranty

LEADING ZEROS AFTER DECIMAL

Hi
I want to remove leading zeros after decimal what should i do for that?.
suppose lets thing my field is VAR and it gives value 150.000 and now i want to remove the zeros after decimal

QMEL-QMNUM is a character 12 field, which internal format has leading zeros, simplest way to remove the leading zeros is to shift left.
loop iords.
shift iords-qmnum left deleting leading '0'.
modify iords.
endloop.
can either use this function module also
CONVERSION_EXIT_ALPHA_OUTPUT
or
SHIFT <yourField> LEFT DELETING LEADING '0'
or
try NO-ZERO option of WRITE statement
or
Another way is to create another variable of type I and assign the value into it
example:
DATA: L_NUMC(08) TYPE N.
DATA: L_INT TYPE I.
L_NUMC = '00000018'.
L_INT = L_NUMC.
Result will be = 18.

How to delete trailing zeros after decimal ?

Hi,
i want to delete trailing zeros after decimal.
Example:
if it is 22.000 then output will be 22
if it is 22.010 then output will be 22.01.
plz let me know hw to do this ?

DATA:
lv_decimal TYPE f DECIMALS 3,
lv_string TYPE string.
lv_decimal = '22.010'.
WRITE lv_decimal TO lv_string.
SHIFT lv_string RIGHT DELETING TRAILING '0'.
CONDENSE lv_string NO-GAPS.
* now no trailing zeros are in the decimal stored in LV_STRING
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jan 30, 2008 12:10 PM

Retain trailing zero's after decimal

Hi,
i have a requirement to retain trailing zero's after decimal....
is it possible?
version: 9.2.0.7
example: select 150.200 from dual;
we will get 150.2 as output.
but i need 150.200 as the output...
how would i do this?

oraDBA2 wrote:
Hi tony,
sorry, that is not the constant value...that is a variable based on the value, what user enters with the decimals.......if i understood you correctly,
it seems like you will need to use char or varchar2 datatypes in that table to start doing what you would like to do in the way you wan't it.
and still you have option to apply to_number and to_char on that varchar2 column.
SQL> create table b (charr varchar2(15) );
Table created.
SQL>
SQL>
SQL> insert into b (charr) values ('1000.000');
1 row created.
SQL> commit;
Commit complete.
SQL> select* from b;
CHARR
1000.000
http://stanford.edu/dept/itss/docs/oracle/10g/appdev.101/b10795/adfns_ty.htm#1006325

Zeroes after Decimal

Hi,
I am having a value as '6009.12300 ML' belongs to type C.
Now i don't want the zeroes after decimal such as 6009.123 ML .
how cud i do this?
i tried search ,split,shift,trailing zeroes but could nt get it?
Thanks,
Ponraj.s.

Hi,
I tested the following code segment, it works well to suit your requirement.
Just look at the code.
DATA C(20) VALUE '6009.12300 ML'.
DATA: LEN TYPE I,
           FLAG TYPE I.
LEN = STRLEN( C ).
DO LEN TIMES.
LEN = LEN - 1 .
IF ( C+LEN(1) EQ '0' ) .
    C+LEN(1) = ' ' .
    FLAG = 1 .
ELSE.
    IF FLAG = 1 .
      EXIT .
    ENDIF .
ENDIF .
ENDDO.
CONDENSE C NO-GAPS.
WRITE C.
Reward if helpful.
Regards,
Sandhya

How to get only two digits after decimal point of an expression

i am doing simple multiplication between two float numbers.
both the numbers have two digits after decimal point.
so naturally the result will have 4 digits after decimal point.
i want to get only two digits after decimal point.
help me please...

If you just want to limit the displayed decimal places, you can do the following...
import java.text.*;
public class Formatting {
    public static void main(String[] args) {
        NumberFormat format = NumberFormat.getNumberInstance();
        format.setMaximumFractionDigits(2); //what you seem to want
        format.setMinimumFractionDigits(2); //if you always want at least 2 digits displayed
        System.out.println(format.format(12.345));
        System.out.println(format.format(12.0));

Process order confirm_Goods movement_Qty consum. after decimal point not al

Sir,
I am doing process order confirmation (COR6), In which go to "Goods Movement "....and consume actual consumption qty...but when i put figure after decimal point, system does not allow...e.g 3.524 KG...System rounded figure which i put in BOM...e.g in bom 3.524 KG, but when i confirm (COR6) the order shows 4 KG....
Pl. help how to put decimal point...
Pl. not that in BOM , system allows to put decimal point qty, but in confirmation it does not allow...
Error message comes :
Only 0 decimal places are permitted for unit of measure KG
Message no. RU303
Rajesh

Sir,
We check in CUNI,
But in BOM, Decimal Point is allowed, but when we confirm the process order decimal place is not allowing...
If seems that is it any setting in process order ?...Because if any error in CUNI then it does not allow at BOM creation level also....
Rajesh Mehta

How to keep the zero after decimal

Hi,
I'm trying to store numbers into one of the custom table column. This column must contain unique value for each record.
Now the issue is if i want to insert a record with zero after decimal point its removing that zero.
Emp Id (number)
1234.1
1234.2
1234.9
1234.10 --> 1234.1 (this is what is getting stored in table)
1234.11
...I want to store 1234.10 not 1234.1, is there any way that i can store zeros as well after decimal point for NUMBER data type column.
Thanks in advance,

Hi,
Your appending sequence number should be with leading zeroes like
1.001
1.002
1.003
1.009
1.01
1.011 etc
based on the numbe rof records you haveTry this and see if this fits for you
DECLARE
   CURSOR c1 IS SELECT * FROM custom_table1;
   i              NUMBER;
   l_len          NUMBER;
BEGIN
   SELECT LENGTH (COUNT (*))+(LENGTH(some_seq.currval)-1) INTO l_len FROM custom_table1;
   FOR c1_rec IN c1
   LOOP
      i           := some_seq.NEXTVAL;
      INSERT INTO test_tab (ID, NAME, amount, create_date)
           VALUES (c1_rec.ID || '.' || TO_CHAR (i, rpad ('0', l_len, '0') || '9')
                  ,c1_rec.NAME
                  ,c1_rec.amount
                  ,c1_rec.create_date);
   END LOOP;
END;G.

How to remove zero after decimal point.

hi friends
how to remove the zero after decimal points.
example :
123.450 -- if print only 123.45
45.600 - 45.6
any body help me.
thanks
pauldhama

go through this example
it may help u
DATA: T(14) VALUE ' abcdefghij',
STRING LIKE T,
STR(6) VALUE 'ghijkl'.
STRING = T.
WRITE STRING.
SHIFT STRING LEFT DELETING LEADING SPACE (or use 0 to detete 0).
WRITE / STRING.
STRING = T.
SHIFT STRING RIGHT DELETING TRAILING STR or 0.
WRITE / STRING.
Output:
abcdefghij
abcdefghij
abcdef

After Decimal

Similar Messages

Maybe you are looking for