After decision in UWL, start webgui to add a note

Hello,
In the UWL we have a task to approve an invoice. If the user reject the invoice, he/she needs to add a reason in an office note.
In the existing situation this is not an automatic proces. After rejection the dialog is lost and there will be a new task in the inbox to add a note.
I changed the workflow to keep the dialog. So when the user reject the invoice, there appears a window to add the reason. This works fine in the backend but not in portal.
I think there is a problem with starting the webgui after the decisiontask.
Please help.
Kind regards,
Stefan

Hi Pierre,
Thank you for your answer.
No there is not a reason for, that is just the exisiting situation.
We also thought about that solution. It's easy to use.
Is it also possible to use this note in only 1 decisiontask?
But what if the next action is a transaction, then it's also necessary to start the webgui?
Kind regards,
Stefan

Similar Messages

  • HT3964 My Macbook Pro did not respond to the power button, and I ended up resetting the smc.  After that, it would start, but the keyboard  would not respond, pnly the trackpad.  On the screen there is a symbol with ahorizontal white bar and a row of empt

    After resetting the SMC the keyboard is inoperative.  On the start screen appears a traslucent square with a horizontal bar in white, and a row of empty dots below (the same format as for example the brightness symbol).  I cannot turn the Mac off with the power button, only with the trackpad, clicking on the turn off symbol on the screen. 
    When I try to login with my username, no characters appear as I type.
    I can login as a guest, but from there I can do nothing, because the keyboard is still inop and if I wanted to, for example, have the software updated, I need to type an admin login, which is impossible.
    Thanks for your help

    What happens if you close the lid? Sleep?
    In your place I would use sleep state to reset PRAM, as it can resolve your graphical mess.
    Your keyboard likely was not powered after SMC/PRAM failure, so you will need to open MBP cover without opening the lid and disconnect battery power cable with insulated tools from logic board, wait for 5-10 minutes, then try to reset PRAM while keeping cover

  • After run-sa.sh start,why NQServer.log can not find?

    I have install BIEE with advanced install,after startup the db and ias,then start biee,when run run-sa.sh,after that,can not create NQServer.log ,seems the biee server did'nt startup,why?
    $ /3510/BIEE/BI/OracleBI/setup/run-sa.sh start
    Oracle BI Server startup initiated.
    Please wait for a while for the Oracle BI Server to completely start.
    Execute the following command to check the Oracle BI Server logfile and see if it started.
    tail -f /3510/BIEE/BI/OracleBI/server/Log/NQServer.log
    $ ls -l /3510/BIEE/BI/OracleBI/server/Log/NQServer.log
    /3510/BIEE/BI/OracleBI/server/Log/NQServer.log: No such file or directory

    Is there anything else on the /3510/BIEE/BI/OracleBI/server/Log/ directory?

  • Action failed after start Crystal report add-on then Account Setup

    Dear All,
    We got an error message on a work station when start Crystal report add-on >> Go Account Setup >> type in sa password >> Action failed
    Then I tried on the server. It used to work before. I type in the same password, the error message said 'login failed...'
    The password is correct. I can login by using management studio.
    Then I changed the password of sa user in management studio. On the server, after I changed password in Account Setup, it works. But on the workstation, I still have the same error message Action failed.
    They are on SAP2007A PL06HF01, SQL2008, the OS of the workstation is Windows Vista business
    Any idea? Thanks a lot.
    Regards,
    Yuka

    Hi Yuka,
    I moved your post to the Integration Kit forum.
    Also be aware that CR 2008 supports MS SQL Server 2008 with Fix Pack 2.3 installed. MS also only supports MS SQL Server with their new Client. Go to the install CD for SQL Server and instlal the client Tools which installs a new driver.
    Need to know what version of CR you are using?
    Thank you
    Don
    Edited by: Don Williams on Feb 22, 2010 6:50 AM

  • Toolbar items I add do not stay on bar after restarting Firefox 4.

    Toolbar items I add do not stay on bar after opening firefox 4 again. I need to add them each time I start firefox, even basic ones like Print. Some stay put eg home but mostly they are wiped out on the main bar that contains the Awesome bar and search bar.
    Am I missing a plugin or something?

    This is caused by a corrupt file, for details on how to fix it see https://support.mozilla.com/kb/Toolbar+keeps+resetting

  • Using ITS embedded to access UWL and webgui on EP6

    I've installed a WebAS 6.40 Java System and EP6 on Windows2003. Both I've upgraded to SP11.
    I read a paper that on WebAS 6.40 version it's not necessary to install ITS to Portal runs WebGUI and connects to UWL because there are a ITS version embedded on WebAS 6.40.
    Is that true? How can I activate this ITS embedded to use webgui and to connect UWL on EP6?
    Thanks,
    Andre

    Hi Andre,
    WAS 6.40 ABAP stack delivers the integrated ITS and SAP GUI for HTML as one of its services. You need to do some initial config however to enable it. You can find more info on the setup and configuration at http://help.sap.com/saphelp_nw04/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm
    With regards to UWL, you can do the connection and preview all the work items without SAP GUI for HTML (~=WebGUI). SAP GUI for HTML kicks in only if you need to execute work items which launch SAP transactions or reports, plain user decisions don't require webgui.
    The UWL config guide is available at http://service.sap.com/netweaver -> Media Library -> How-to Guides -> Portal, KM and Collaboration -> All -> Configuring the Universal Worklist.
    Hope this helps,
    -Mikko

  • I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

    I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • After removing system fonts and reinstalling fonts, FireFox will not start

    After removing system fonts and reinstalling fonts, FireFox will not start! When I start FireFox the "Mozilla Crash Reporter" opens as if FF just crashed??? I don't see any records in event viewer. I am using FF v3.6.3 on a Windows 7 box. I tried uninstalling 3.6.3 and installing 3.0.18 and had the same problem!
    == This happened ==
    Every time Firefox opened
    == After a uninstalled all fonts including system fonts and then reinstalling system fonts. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.5)

    The files with submitted crash report ids are inside the ''submitted '' directory, from the directory you found the LastCrash.txt timestamp file.
    The file names will begin with '''bp-'''
    There might be more information from the crash report, but it might just tell us you are crashing the first time Firefox tries to use a font.
    One thing I suppose you could do is select only those fonts you've got in Tools -> Options -> Content -> Fonts and Colors -> Advanced and then uncheck the '''Allow pages to use their own fonts''' option.
    See http://support.mozilla.com/en-US/kb/Options+window+-+Content+panel#Fonts_Dialog
    To be honest, I can't find anything on this Netscape Font Navigator and it sounds highly dubious.

  • After upgrading to lion starting up is taking much more time ??

    After upgrading to lion starting up is taking much more time is there any solution to this ?
    i do all things about cleaning disk permission or editing .

    Have you check what is being started at the same time?
    Lion will start more applications then were being started in the past.
    Allan

  • Microsoft Excel 2013 add-in not working after update

    I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
    We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
    with the following error message displayed.
    I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
    15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
    I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick.  This is not the only add-in it is affecting
    as there are some 3rd party add-ins are affected as well.
    Please advise how we can fix this without needing to re-install Microsoft Office.  Thank you!

    I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
    Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
    and look for keys named OPENx, where x is the order number the addin is loaded
    if not "ticked" instead of \Options look in \Add-in-Manager
    With a VBA macro or in the VBE's immediate window return
    Application.LibraryPath 
    Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
    If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
    them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
    You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
    Are you using a Chinese system?

  • Windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....aaahhh

    windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....as itunes does not pick up the phone I have connected anymore. My ipod synchs fine still and thats over 6 years old!

    Hi rubicon7,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    I hope this information helps ....
    Have a great day!
    - Judy

  • After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    Click here and follow the instructions.
    (99061)

  • Post Goods issue after clicking on Load Starting push button

    Hi All,
    Post goods issue for deliveries, suppose if the shipment document is created for XXXX country do the post goods issue after clicking the push button loading start on. and if the shipment is created other than the XXXX Country do the post goods issue after clicking the shipment start button(Done by Standard SAP).
    There will be validation table in background to identify which shipping point to allow Post Goods Issue before shipment completion. This will require enhancement of Delivery User Exit to incorporate above check based on below mentioned Z Table.
    Z-Table
    - Shipping Point.
    - Delivery Type
    Any body please suggest the user exit or any function module and how to start code for this particular requirement.
    Thanks & Regards,
    Narasimha

    Hi,
    You can write your own vaalidation on click of loading start button.
    Go to include MV56AI_IS_ENHANCEMENT of program SAPMV56A.
    Click on the circular button(Enhance).
    Then Edit --> Enhancement Operation --> Create.
    Create your enhancement giving it a Z name.
    Then in this enhancement you can write your code.
    For loading start you can write your code in the following fashion.
    IF fcode = 'MM_ST03'.
          business logic.....
    ENDIF.
    Regards,
    Firoz.

  • TS1440 I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to.button to repair/verify is there but cant be

    I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to. The buttons to repair and modify we're there but they were grey and couldn't be pressed.

    Were you trying to repair the disk you were booted from? You can't do that - you need to boot from your install disk, and choose 'Disk Utility' from the 'install' menu.

Maybe you are looking for