After deleting Calendar users, their subscriptions still remain, and the server crashes when accessing deleted calendars

After deleting users from iPlanet Calendar Server(iCS), the users'
subscriptions still remain. Then, if a user tries to unsubscribe
from a deleted calendar, the server sometimes crashes, even though sufficient
disk space and memory are available. When checking the HTTP log, the
log shows that certain calendars don't exist.
The solution to this problem is to back up the ics50gse.db
file to another file with a different
name, or remove the file from the db
directory.
<P>
If you are upgrading your iCS, make sure the GSE database queue is empty
before you perform the upgrade. To check the GSE database queue,
you can use either of the following commands while the server is either
running or stopped:
<P>
csschedule list
<I>OR</I>
csdb -v list
<P>
After issuing the command, if nothing is displayed, the GSE queue is empty, and
you can proceed to step 3 below. However, if the queue does contain
items, use the following steps to flush it:
<P>
<OL>
<LI>Start the server if the server is in a <I>stopped</I> state.
<P>
<LI>Stop only the cshttpd
daemon so that no new requests can
come in.
<P>
Note: It should take only a few minutes for the GSE to handle any requests.
Typically, the GSE queue will be empty.
<P>
<LI>Shut down iCS.
<P>
<LI>Rename the ics50gse.db
file.
<P>
<LI>Restart the server.
</OL>
<P>
If you have already upgraded the server and are experiencing the above
mentioned problems, use the following steps:
<P>
<OL>
<LI>Shut down iCS.
<P>
<LI>Rename the ics50gse.db
file.
<P>
<LI>Restart the server.
</OL>

I forgot to mention that I've cleared out ~/Library/Caches/ for my test user, as well as deleted the iWeb .plist file.

Similar Messages

  • I have been using Lightroom 4.4 successfully for over 2 years.  Just tried to import some new photos after a vacation and the application crashes when I click "import" every time.  Tried restarting computer.  Version says it is up to date.

    I have been using Lightroom 4.4 successfully for over 2 years.  Just tried to import some new photos after a vacation and the application crashes when I click "import" every time.  Tried restarting computer.  Version says it is up to date.
    How do I get formal support for this from Adobe?

    Thanks for the response.  The application was crashing.  A Windows message was displayed showing "Lightroom.exe has stopped working", "Windows can check online for a solution the problem.". Etc.
    I just launched Lightroom to check the exact message for this reply - and the Import worked.  It had failed dozens of times before. 

  • Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop

    Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop
    Please help

    It is a folder which I have created. Name is "SAP".
    I copied some of my office stuff and then deleted the contents inside the folder. But I couldnt delete the folder SAP.
    This is happening after the Mavericks update.

  • I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed.   The vocal transformer insert in Logic Pro doesn't quite do it.   Suggestions?

    I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed.   The vocal transformer insert in Logic Pro doesn't quite do it.   Any Suggestions?

    Try one of the Audio Voice Effects like Alien / Cosmic / Robot… etc. to start with…
    Adjust the Settings in the Inspector to your liking…

  • On my ipad mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo).  I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.

    On my iPad Mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo).  I've called support for both ATT and Apple and can't find a way to have the emails remain on the server. 
    My husband and I share an email address and if he misses a day checking email on his notebook, he doesn't receive the items that I have sent to Trash on my iPad Mini.
    Appreciate suggestions.
    [The curious thing is, if I "move" the deleted emails from Trash on my iPad Mini into the Inbox, I can go to my notebook, open my online email and they are back in my ATT/Yahoo Inbox.]

    Is your Yahoo account set up as POP3 or IMAP?

  • Personal Domain changed but iWeb still remains with the old one

    Hi,
    recently I changed my Personal Domain on MobileMe. Unfortunately iWeb still remains with the old one: Even if I create a new iWeb-Domain the problem occurs. I also checked whether this is a local iMac problem or not but it isn´t unless I have the same issue with my MacBook Air using the same MobileMe Account. Every time I open iWeb the 'Settings Page' shows the old personal domain name (displayed in brackets behind the MobilMe Account information). At MobilMe the new Personal Domain name displayed as the active one.
    Any Ideas?
    Thanks in advance
    Mikl

    I have this same problem.. Any help would be appreciated!!!

  • TS1424 I have already downloaded wrath of the titans and watched it through but a download of the movie in the iTunes store still remains and also keeps timing out? This is preventing me from downloading any other movies onto my iPad any suggestions?

    I have already downloaded wrath of the titans and watched it through but a download of the movie in the iTunes store still remains and also keeps timing out? This is preventing me from downloading any other movies onto my iPad any suggestions?

    no, i had to leave so i logged out and when i opened itunes on my mac and went into the downloads tab it only had one paused download listed. i resumed the download for the one movie listed and the other one never showed up. its been about two weeks since i initially bought the two movies so i figured something was wrong.

  • FCP X deleted about 2/3 of events to a project and the project. I uploaded the project to vimeo from FCP X, and the next day when I tried to use FCPX, they were gone, the events are gone from fcp and my ext hd, the project is still on the ext hd.

    FCP X deleted about 2/3 of events to a project and the project. I uploaded the project to vimeo from FCP X, and the next day when I tried to use FCPX, they were gone, the events are gone from fcp and my ext hd, the project is still on the ext hd, but it won't recognize in FCP X even though my ext HD shows in the project tab. anybody any clue how to bring it back?

    Thanks for the reply Andy.
    No, I don't have identical projects on a second drive, only saving to the movies folder on internal HD. The files and media save there fine, but fcp doesn't seem to recognise them the next day, just opens with one new untitled event and no projects.
    I have tried saving to en external HD tonight and will see if the problem happens again with this set up when I restart tomorrow.
    But I should be able to save to internal HD, so something is going wrong...
    Peter

  • TS3276 When I add a name to the "To" box or CC/BCC box and then change my mind about sending an email to them, Mail is ignoring the instruction to "remove" so that once the email has been sent, their name is still included and the email goes to them anywa

    Can anyone help?  When sending an email and I add a name to the "To" box or CC/BCC box which I later decided I don't want to include, Mail ignores the instruction to "remove" that name so that once the email has been sent, the name is still included and the email goes to them anyway.  Pretty frustrating and I don't understand why this is happening. 

    You would really have to ask the app developer if there is a way to export the data.
    As for adding a printer, you would need to purchase an AirPrint compatible printer and connect it to your wireless network.
    By the way, your holiday letter/rant/Idon't even know what to call it... is completely inappropriate for these forums.

  • Unable to start EBS DB after the Server Crash. Error in installing the Required RPM.

    Hi , Hussein ( As most of the Time It is Only you here who comes to the rescue or give Usefull inputs. I am sorry if i mistaken, no Pan intended for Other Experts)
    I 've also posted this issue here but got no response. https://forums.oracle.com/thread/2590497 
    Badly require your inputs and suggestions on the Following Issue. , Really Appreciate the suggestions.
    I need to Install the sabayon-apply rpm which could fix the issue after the Server Crash but unable to install it.
       Please see the Brief of the Issue.
    I got stuck up in installing the rpm after the server(Red Hat Enterprise Linux Server release 6.0 (Santiago) x86_64 GNU/Linux) got
    crashed Eventhough I am able to start it in Xwindows but not able to run or start EBS database along with many other programmes. Also The
    VirtualBox machine installed on it 've No issue, they work fine  But the host OS is not fine. as there are lots of
    errors in .xsession-errors. which i 've pasted below.  And Unable to Install the sabayon-apply rpm that could have fix the Issue.
    I would highly Appreciate if anyone could drop few hints and suggestions on this Issue as this is really Urgently Important for me.
    Please see the following Brief of the Issue.
      after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
      While installing the rpm i 've inadvertantly issued or run  this command
      rpm -ivh *.rpm --force --nodeps  as it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
        After That I could Not Install any rpm with yum or rpm command as getting the Same Errors. 
    while trying to install individual rpm am getting the followig Errors
    [root@ebs Packages]# rpm -ivh libX11*
    error: libX11-1.3-2.el6.i686.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
    error: libX11-1.3-2.el6.i686.rpm cannot be installed
    [root@ebs Packages]# rpm --checksig gtk2*
    gtk2-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-devel-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-devel-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-devel-docs-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-engines-2.18.4-5.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-engines-2.18.4-5.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-immodule-xim-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    For that I tried to import the RPM GPG Key But still faced the same errors
    [root@ebs yum.repos.d]# wget http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 -O /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle Key fingerprint = 4214 4123 FECF
    C55B 9086  313D 72F9 7B74 EC55 1F03
    --2013-10-08 00:04:56--  http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
    Resolving public-yum.oracle.com... 202.159.216.177, 202.159.216.171
    Connecting to public-yum.oracle.com|202.159.216.177|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 1011 [text/plain]
    Saving to: “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
    FINISHED --2013-10-08 00:05:06--
    Downloaded: 6 files, 55K in 2.0s (27.7 KB/s)
    100%[===========================================================================================================================================================>]
    1,011 --.-K/s   in 0s
    2013-10-08 00:04:56 (155 MB/s) - “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
    saved [1011/1011]
       Than i run this command
    [root@ebs yum.repos.d]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle  ----it Returns with no output
    [root@ebs yum.repos.d]#
    [root@ebs log]# rpm -q gpg-pubkey-ec551f03-4c2d256a
    gpg-pubkey-ec551f03-4c2d256a
    But still I can't install the rpms, got the same Errors. please see the following
    [root@ebs yum.repos.d]# yum install firefox*
    Loaded plugins: refresh-packagekit, rhnplugin
    This system is not registered with RHN.
    RHN support will be disabled.
    Setting up Install Process
    Downloading Packages:
    (1/2): firefox-17.0.9-1.0.1.el6_4.x86_64.rpm
      |  25 MB     03:42
    (2/2): xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
      |  14 MB     02:03
    Total
    117 kB/s |  39 MB     05:46
    error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD
    Problem opening package xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
    [root@ebs log]# rpm -qf `which gpg`
    error: rpmdbNextIterator: skipping h#     455 Header V3 RSA/SHA256
    Signature, key ID fd431d51: BAD
    [root@ebs log]# gpg --list-keys
    /root/.gnupg/pubring.gpg
    pub 1024D/11F63C51 2002-02-28
    uid Jamie Cameron <[email protected]>
    sub 1024g/1B24BE83 2002-02-28
    pub 2048D/671DF296 2013-10-08
    uid oracle
    sub 2048g/9FE459CE 2013-10-08
    pub 1024R/F3A5AC78 2013-10-08
    uid oracle (no comment) <[email protected]>
    sub 1024R/6DC65985 2013-10-08
    pub 1024R/78F6C944 2013-10-08
    uid root user (Example GPG Key Signature For RPM
    Packages) <[email protected]>
    sub 1024R/77C97AFF 2013-10-08
    [root@ebs log]# rpm -qi 'gpg-pubkey-*'
    Name : gpg-pubkey Relocations: (not relocatable)
    Version : ec551f03 Vendor: (none)
    Release : 4c2d256a Build Date: Wed 09 Oct
    2013 01:09:10 AM IST
    Install Date: Wed 09 Oct 2013 01:09:10 AM IST      Build Host: localhost
    Group : Public Keys Source RPM: (none)
    Size : 0 License: pubkey
    Signature : (none)
    Summary : gpg(Oracle OSS group (Open Source Software group)
    <[email protected]>)
    Description :
    -----BEGIN PGP PUBLIC KEY BLOCK-----
    Version: rpm-4.8.0 (NSS-3)
    mQENBEwtJWoBCACpiY2rGA6T0ceBi92X88/QclytVBjtDRohOVzs3pmIPh3ULqsW
    G323nmyKbKQBBSjh9OnuO9Y09VG8mzr/w9YV0Ix4cI9/HDTERZ2+TR5u+VNn5J5h
    yvwQSN/FEK6oH2+mz7O0yUNleN7UltR4MOEkHIoAhIvv+1AQQKN3OM8oalz+3gv/
    zz9rAoQczQzT7QWOtBrsRMZgBrKXY/TpJrpVSO3Hx8CnbhKGtLxCCrxZ5v7hh1ht
    3CRAr2+h5bDA9KP6vBZWKEs7NgcvtZFDY6EJc7AoApr3phX9hHE2+snTxe82DkFT
    uA69C8wLyjPCoSy+tcaCqJKOZelNy9RN/WKRABEBAAG0RE9yYWNsZSBPU1MgZ3Jv
    dXAgKE9wZW4gU291cmNlIFNvZnR3YXJlIGdyb3VwKSA8YnVpbGRAb3NzLm9yYWNs
    ZS5jb20+iQE8BBMBAgAmBQJMLSVqAhsDBQkWjmoABgsJCAcDAgQVAggDBBYCAwEC
    HgECF4AACgkQcvl7dOxVHwMiNAf/cD8R74fCBeQsAYid5slIz7CG8xEOBUTDNEJT
    p/owtzr7m7Ydp1txNBOkVeVkUP8czX5EldcmoxA4kCCyHhnxmpJnOt52Fy5ZRnYh
    Ll5gYdpJpXGVScB7fnlh3rJAaesSTacVFC5MKIYPZBiTo9soSXMLNcG8WqHPasdd
    AblC4t5BTDNYlX1RiPeP6m5egHnnxyAXsis8fqIZY0RC9hERxWQ6hdDAX0tJXY8F
    88HDUozvo8jqTlg/5GZcfqcbUjjMUJQ5cBtH3adCthMycdPpPXWJQBuzMIdFJ03u
    YuQ3XrKxBkOLips+OZuWNVZzrPOHsenb49aX4yQsLVc2E2fhKQ==
    =M8XY
    -----END PGP PUBLIC KEY BLOCK-----
    I 've tried to remove the existing keys But Not able to remove them as well.
    Is this the right way of removing the keys ?
    rpm -e --allmatches 'gpg-pubkey-ec551f03-*'  the ec551f03 is the
    version of rpm -qi 'gpg-pubkey-*' query...  Please correct
    Could you tell what I am missing here that's causing the Issue.
    Following are the Errors that is observed in .xsession-errors log file
    ===== BEGIN RING BUFFER (/usr/sbin/sabayon-apply) =====
    MainThread 2013/10/08 18:34:23.3001 (sabayon-apply): No profile for
    user 'root' found
    MainThread 2013/10/08 18:34:23.3005 (sabayon-apply): Fatal exception!
    Exiting abnormally.
    MainThread 2013/10/08 18:34:23.3009 (sabayon-apply): Traceback (most
    recent call last):
    File "/usr/sbin/sabayon-apply", line 149, in <module>
    sys.exit (util.EXIT_CODE_NO_USER_PROFILE)
    SystemExit: 3
    ===== END RING BUFFER (/usr/sbin/sabayon-apply) =====
    This configuration for the debug log can be re-created
    by putting the following in ~//etc/sabayon/sabayon-debug-log.conf
    (use ';' to separate domain names):
    [debug log]
    max lines = 1000
    gnome-session[3707]: EggSMClient-WARNING: Desktop file
    '/etc/xdg/autostart/esc.desktop' has malformed Icon key
    'esc.png'(should not include extension)
    GNOME_KEYRING_SOCKET=/tmp/keyring-x5SKbN/socket
    SSH_AUTH_SOCK=/tmp/keyring-x5SKbN/socket.ssh
    Failed to play sound: Not available
    (polkit-gnome-authentication-agent-1:3917): GLib-GObject-WARNING **:
    cannot register existing type `_PolkitError'
    (polkit-gnome-authentication-agent-1:3917): GLib-CRITICAL **:
    g_once_init_leave: assertion `initialization_value != 0' failed
    W: main.c: This program is not intended to be run as root (unless
    --system is specified).
    ** Message: applet now removed from the notification area
    ** (gnome-user-share:3948): WARNING **: gnome-user-share cannot be
    started as root for security reasons.
    08/10/2013 06:34:26 PM Autoprobing TCP port in (all) network interface
    08/10/2013 06:34:26 PM Listening IPv{4,6}://*:5900
    08/10/2013 06:34:26 PM Autoprobing selected port 5900
    08/10/2013 06:34:26 PM Advertising authentication type: 'No Authentication' (1)
    08/10/2013 06:34:26 PM Advertising security type: 'No Authentication' (1)
    Initializing nautilus-gdu extension
    Initializing nautilus-open-terminal extension
    ** Message: applet now embedded in the notification area
    Connecting to deprecated signal
    QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    kbuildsycoca4 running...
    Connecting to deprecated signal
    QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    Connecting to deprecated signal
    QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
    specified for 0x4e00019 (Restore Se).
    Object::disconnect: Unexpected null parameter
    QObject::connect: Cannot connect (null)::activePartChanged(
    KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
    kio_http_cache_cleaner: Already running!
    Object::disconnect: Unexpected null parameter
    Window manager warning: Invalid WM_TRANSIENT_FOR window 0x5200004
    specified for 0x5200019 (Restore Se).
    Object::disconnect: Unexpected null parameter
    QObject::connect: Cannot connect (null)::activePartChanged(
    KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
    Object::disconnect: Unexpected null parameter
    QObject::connect: Cannot connect (null)::activePartChanged(
    KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
    Object::disconnect: Unexpected null parameter
    Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
    specified for 0x4e08cb7 (timesofind).
    libpng warning: Extra compressed data in IDAT
    Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
    specified for 0x4e0a6e3 (Server Aut).
    Highly appreciate the response.
    Thanks And Regards
    MZ

    The Packaged are already there on the server as the RHEL software DVD is copied on the server.
    Yes it was working before the crash, And Even after the Crash i.e
    after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
      and was in the process of installing the sabayon rpm i 've inadvertantly issued or run  this command
      rpm -ivh *.rpm --force --nodeps  from RHEL software Packages directory.   
    and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
       After that I could Not install any rpm from rpm or yum command.
       I 've  Downloaded the new sabyon*  and Other rpms from the net and tried to install them with rpm or yum command but
        got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD 
       with yum am getting this error
       error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
      I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
      The Reinstallation of OS is not AN Option for me rightnow.
       Could you tell something which i could try & may be that works.
    Thanks
    MZ

  • IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year

    IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year after the upgrade and some Apple staff blame this- but this started one year later after the iOS upgrade. Recently at the Apple Store in Vancouver an Apple staff reset my computer (erased everything and sent to iCloud to reset the iPad) and I hoped this would fix the problem. IPad Safari still crashes. Short of booking an appointment for taking it for repair to Apple technicians which will cost me money can anyone help me to fix this Safari crashing.

    Hi,
    You might have a 3rd party plugin that isn't compatible with Safari 4.0.4. Go here for help...
    Safari add-ons can cause performance issues or other situations
    If you are using a USB hub, try disconnecting and restarting with just your keyboard and mouse connected.
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    from the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Mac OS: Web Browser Quits Unexpectedly or Stops Responding
    Also, you could download and install the 10.5.8 combo update (PowerPC) available here.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    It contains fixes that might help. Then repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices

    I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices,

    Hi jhyiesla,
    Im not sure wether I got you right or not. But my advice/s would be as follows:
    These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
    1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
    2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
    3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
    4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
    5) now you can empty your trash on your mac.
    Further,
    - You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
    - If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
    jl

  • The pictures in several events I imported disappeared, only the event names remain. Now iPhoto crashes when I try to import new files. Any ideas?

    I imported several hundred pictures to different events. Some directly from a Canon EOS camera (large card) and some form old CD's. The import process went fine. But I noticed some events were empty after having seen them in the library. Thought it was my mistake and may have moved the pictures to other event. The last CD I was importing could not be read and iPhoto hanged. I had to force turn off the laptop and when restarted, several of the newer events were also empty and now iPhoto crashes when I try to Import to Library. Does anybody has had an experience like this? I really need to recover the pictures because I already deleted them from the camera. Help will be greatly appreciated.

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Blackberry Z10 and Choice of deleting Email on phone or the phone and the server

    Just like the 9930 my email is set up through a POP account. When deleting I was given the option to delete from the phone or from the phone and the server. This option is no longer available and I lost a bunch of emails that went away for ever!!

    Hello,
    There are many threads here about this topic. BB10 is a revolutionary change from before...not evolutionary. Hence, it should not be expected that things work as they did before.
    As it stands, BB10 uses ActiveSync for email, where legacy used BIS. With BIS as the interface, there was the ability for additional things, including the "Delete On..." setting. With BB10, that is not available. Now, the device and the server are intended to be mirror images of each other (within the timeframe of the max 30-day sync).
    So, this is WAD -- Working As Designed (though I'm hopeful the BlackBerry has heard all of the cries and is looking into future modifications).
    The workaround is to file messages into a separate folder so as to hide them from your device, but not delete them from your server. This, though, has an additional complication...when you file, the folder to which you file is automatically selected for sync and display to your BB, then displaying all unread items from this folder in your Messages list for that account. So, after each filing session, you must manually shut off that sync setting so those items are not shown on the device.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1277 can I delete emails from my IPhone and the server as well?

    Can I delete emails from both my IPhone 5 and the server as well?

    It's very easy to do - open up the music app, find the song/artist/album you want to delete and then swipe on it right to left and press 'delete'. Once you have done this it will take up no more space on your device whether it's in the cloud or not.
    If the song is still appearing in the music app with a little cloud next to it then you can stop it from showing by going into settings, music, and turning off 'show all music'. Note that this will remove ALL songs from the music app that have the cloud next to it (the cloud means they are in the cloud, online, but not stored on the device) and if you want to play them you will have to open itunes and redownload it, or change this setting back to on.
    Let me know if you need any more help!

Maybe you are looking for

  • Can i install windows 7 and OS X together on the same Mac Book Pro?

    can i install windows 7 and OS X together on the same Mac Book Pro?

  • Lion + Macbook Pro 17 + Time Machine = Freeze

    I recently upgraded to OS X Lion on my mid-2009 MBP 17" and I am also getting complete system lockups - the mouse moves, but no keyboard, no clicks, no window movements, and all menu bar items stop updating, including the system clock.  Power cycle i

  • OVS with no input parameter

    Hi, I'm trying tu implement an Object Value Selector for one of my inputfields. I use an RFC fonction module that gives a list of values that the OVS should use. I follow the tutorial on OVS but the difference is that my RFC function does not have in

  • Re: Apex 3.0 Insert Function Works, but records can't be found

    i have an existing application that I created with Apex 3.0. It allows users to search for records using several different criteria and it allows them to update records. I added functionality that allows the user to insert a new record. The insert al

  • Communicating between Weblogic 8.1 and Weblogic 10.3

    Hi, I have a requirement where in I need to access Queues in Weblogic 10.3 from Weblogic 8.1 and viceversa. Weblogic 8.1 : This has a proxy/web application that needs to put request to a Queue exposed in weblogic 10.3 And will again poll for a Respon