After deleting enhanced view still the bsp application is showing in se80

Hi,
I enhanced one component then after some reason i deleted the enhanced view at that time it's asked do you want to delete bsp application i click on yes then after also still i showing in se 80 under my package it's showing.
after deleting enhancement view and deleted enhancement component.
after deleting these total still all the z classes are showing in sm24. if i enhance from starting on wards from enhancing component and enhancing view i need to new bsp application name because previous bsp application is still showing and some of the context class. after transporting in to quality server this component is showing there is context class which i redefine in the development and view is not defined in the run time repository. why it's showing these errors in quality server.
my guess is in dev i deleted which are deleted still the classes and bsp application are there older one if provide new bsp classes also.
what are important things we need to follow if delete the view enhancement and deleting the component enhancement. because if i transport after deleting with new bsp application name and with a previous existing class with a new request also it's not working quality server. because lot of classes are generating automatically in when we redefine the context class in development so these classes are not there in quality server.
please guide me if delete any enhanced view and component why still bsp application and redefine z classes are showing in se80 and se24. because if enhance newly also and redefine also it's considering previous bsp application and previous redefine classes.
what are precautions i need to take if i delete enhanced view and enhance component.please guide me.
jemmi.

Jemmi,
You should follow the following SAP Note in deleting enhancements. There are a few steps to be done in SM34. If we just delete through the wizard we are bound to have these issues.
SAP Note 1122248 - Consultation:Procedure when dealing w/framework enhancements
Briefly, these are the steps to delete the enhancemnet-
1) In SM34, view BSPWDVC_CMP_EXT. Select enhancement set and then select enhancement definition. You will see your component there.
2) Select your component and in left side navigation click Controller Substitutes.
3) A list of the enhanced views are displayed.
4) Select the views and delete it. Before you delete make a note of the BSP application these views are attached to. Hopefully, you attached them in a Z BSP application
5) Go to SE80. Select the Z BSP application and delete it.
Go through the SAP Note to understand the process in more detail.

Similar Messages

How to SELECT ALL records of a TABLE VIEW in the BSP page

Hi All,
In the BSP portal, I am displaying some data(multple records) in the form of a table using the BSP TAG <htmlb:tableView>. I wrote the logic in the 'VIEW' of the BSP application which will be triggered by the controller. I have used the attribute selectionMode = "MULTISELECT" to have a Check Box to select a row.
My requirement is to have a button/checkbox on the first column of the header of the table view. By clicking on this, it should select/desect all the records of the table. Could someone please help me how to do this? What attribute I should use in the tableview to get the button in the header row of the table and how to select all the records of the table.?
Please provide your valuable inputs.
Thanks & Regards,
Paddu.

Select all / Deselect all functionality when onRowSelection is there

Assigning controller to the bsp application in icwebclient

Hi friends,
 Iam trying to test the help view from crm_ic into my bsp application Z_CRM_IC_HELP.
 I got stuck up while assigning controller to view in the bsp application. I have copied the standard view "help" from crm_ic into bsp application z_crm_ic_help.
and copied the crm_ic.xml file into Z_CRM_IC_HELP.
 In se24 created a controller class ZCL_CRM_IC_HELP_IMPL for the help view controller class CL_CRM_IC_HELP_IMPL.
Properties of the bsp application Z_CRM_IC_HELP page type (view) to select the controller class which i have created above is not displaying the f4 help list. So when am entering the z_crm_ic_help in the controller class fied its throwing the following error as the controller class is not available in the F4 help list.
 The class ZCL_CRM_IC_HELP_IMPL does not implement any controller in the BSP application Z_CRM_IC_TEST
Could anybody please guide to create a simple BSP application in ICWebclient.
or it will be helpful if you can send me any links to work on hands on in ICWebclient.
Thanks & Regards
Sireesha.

Hi Sarah,
the following thread adresses the same problem, within the BSP folder:
[How to change & manage different ports in a mixed web environment (BSP/WAD)|How to change & manage different ports in a mixed web environment (BSP/WAD);
I think its better to use that category instead of BI General.
Best regards,
Sebastian

Two part question 1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? 2) does installing messages beta on os x lion 10.7.5 delete ichat?

Two part question
1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? can you stil use AIM, jabbar, google talk, or yahoo? if you open messages beta does it immediately tell you that messages beta expired?
2) does installing messages beta on os x lion 10.7.5 delete ichat or just transform ichat into messages beta giving the illusion that ichat is deleted?

Hi,
It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012 (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
8:51 PM Sunday; May 5, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Capture all the Users who viewed the BSP Applications ???

Hello All,
       I need to create a BSP Application which shows all the Users, who have executed different BSP Applications and the Number of Times each user has executed these BSP's.
Is this Possible ?
If yes, can anyone tell me how to go forward ????
Regards,
Deepu.K
Message was edited by:
        deepu k

Hello Eddy,
      I have gone thru ur Blog.
But in this I guess I need from this part -->
C. Generating Own Stats in BSP
C.1. Logging It
If all of the aforementioned tools dont cover what youre looking for, or there are technical/other reasons not
to choose them, then there is only one thing left to do. Write your own stuff. It really isnt that difficult to do
and, if you are confident enough, you can make something that suits your needs 100%. Or as a host in a
Flemish regional TV DIY show always says: What you do yourself is usually done better. Let us see what
you need to do in order to achieve this.
First of all you need data on the browser. This can be done via JavaScript and the navigator object:
appCodeName
The code name of browser (i.e.: Mozilla)
appName
The name of the browser (i.e.: Microsoft Internet Explorer)
appVersion
Version information of the browser (ie: 4.75 [en] (Win98; U)
userAgent
String passed by browser as user-agent header. (ie: Mozilla/4.0
(compatible; MSIE 5.5; Windows 98; Hotbar 3.0))
Platform
The platform of the client's computer. JavaScript 1.2 property. (ie:
Win32)
You probably need some extra information like IP number. This can be done via the
request->get_header_field method.
As such you dont need to retrieve this info every time if you have a single entry point like a login page. Just
put it in a server side cookie. Each new page will read this cookie and save this info together with the page
name, user id, eventual parameters, etc. into the log. Now I talked earlier about the visitor concept. This is
also an ideal place to implement this. If you are only interested in returning visitors with a full day time interval,
you can for example determine whether that user has already used that application. If so, you just increment a
counter. If not, you have to create a new line. This method will also reduce the size of your table.
C.2 Showing It
The only thing you need to do is to analyze and visualize stuff. The analyzing stuff is completely up to you.
The following screen shot is an example where the total number of visitors within a given time frame is shown.
It also shows the number of unique visitors in that same time frame compared to the potential number of
visitors. You might find this of interest if you want to know how many (internal) users actually use your intranet
application. You can couple the user info to the department info and then you can figure out whether
department X or Y is actually using the application.
But I didnot get the actual idea of implementing this in my BSP.
Can you give an explanation for the above ?
Regards,
Deepu.K

Create a table view in my BSP Application!.

Hi All,
I am using CRM version 4.0 here i want to crate a new table view in my own BSP Application and want to display in the CRM_IC Application.
The problem now i am facing is.. there is now provision to create the table view via the wizard. I tried to copy the BSP code, changed the code accordingly also i changed the inheritance for the context node class from
CL_BSP_WD_CONTEXT_NODE to CL_BSP_WD_CONTEXT_NODE_TV.
i also copied the iterator attribute.
still the view is coming with an error saying that page have some problem.
can anyone suggest any easy method to create the table view!.
or else can you tell me what i have to do further!.
Thanks n regards,
sudeep v d.

Hi,
The problem is not only at the .htm page!. I think some changes are required at the context node level. for
here is the BSP code I m using for displaying the table view..
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<%@extension name="xhtmlb" prefix="xhtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<%@extension name="CRM_BSP_IC" prefix="crmic" %>
<crmic:tray2 id = "MoreFields"
 title = "<%= otr(crm_ic_appl/BuPaAccount) %>"
 height = "100%,603"
 width = "100%" >
<crmic:trayBody2>
 <crmic:gridLayout cellSpacing = "1"
 columnSize = "1"
 rowSize = "10"
 height = "100%"
 width = "100%"
 widthPredefine = "TRUE">
 <crmic:gridLayoutCell columnIndex = "1" rowIndex = "4" >
 <crmic:tableView design = "STANDARD"
 width = "100%"
 id = "Address"
 table = "//Address/Table"
 visibleFirstRow = "3"
 visibleRowCount = "4"
 selectionMode = "LINEEDIT"
 onRowSelection = "select"
 fillUpEmptyRows = "TRUE"
 headerVisible = "FALSE"
 >
 <crmic:tableViewCols>
 <crmic:tableViewColumn columnName = "STREET"
 title = "<%= otr(CRM_IC_APPL/BuPaStreet_t) %>"
 edit = "TRUE" />
 <crmic:tableViewColumn columnName = "POSTL_COD1"
 title = "<%= otr(CRM_IC_APPL/BUPAPOSTCODE_T) %>"
 edit = "TRUE" />
 <crmic:tableViewColumn columnName = "CITY"
 title = "<%= otr(CRM_IC_APPL/BUPACITY_T) %>"
 edit = "TRUE" />
 <crmic:tableViewColumn columnName = "REGION"
 title = "<%= otr(CRM_IC_APPL/REGION) %>"
 edit = "TRUE" />
 <crmic:tableViewColumn columnName = "REGIONNAME"
 title = " "
 edit = "FALSE" />
 </crmic:tableViewCols>
 </crmic:tableView>
 </crmic:gridLayoutCell>
 </crmic:gridLayout>
</crmic:trayBody2>
</crmic:tray2>
In the above code i have given
table = "//Address/Table"
here the 'Address' is defined as a page attribute type ref to the context node class ( CL_CRM_IC_BUPAMOREADDRESS_CN01 ).
the same class is used in the CRM_IC application works fine!.
also i entered the attribute entry for the 'Address' in the _CTXT class the view.
still the same error 'page cannot be displayed'.
what could be the problem anyone plaese help!.
Thanks n regards,
sudeep v d.

User validation for the BSP application

I wanted a user to access the bsp application.
I already have the user names maintained in the database who will be using the application.
i am using the application class for my application.
where should i do the user validation and how.
i know tst if i would had used the model class then i can do it in the request method of the model class.
but where to do it when using the application class.
Thanks

Hi Din,
I assume that the usernames that are present in your Database also exists in the WAS Server.
i.e. The database has a part of users that are present in the WAS Server.
Your need is to allow only those users in the database to access your bsp application and not others correct!
If your first BSP Page is a ...
View
1.In the DO_INIT method of the Corresponding Controller Class populate the internal table that is present in the Application Class with the usernames that are present in the database.
2. In the DO_REQUEST method of the Corresponding Controller Class check for the username who runs your BSP Application is present in the Database.
You can get the username who run the bsp application using the system field...
data: username type string.
username = sy-uname.
So if the username is in the database show your bsp page else show an error page.
You can directly check for the sy-uname is present in the database.
Page with Flow Logic
It is same as MVC only thing is that method name changes...
Place the code in the DO_INIT of MVC in onCreate of Page with Flow logic.(Populate the internal table of the application class with the usernames from the database)
Place the code in the DO_REQUEST of MVC in onRequest of Page with Flow logic.(Check whether the sy-uname is present in the itab or directly in the database).
Hope it solves your problem
Regards,
Maheswaran.B

WebDynpro equivalent of the BSP application (HAP_DOCUMENT)

Hi-
We are using ECC5.0 and EP 6 SP15
Do you know if there is any WebdynPro application which is eqiuvalent to the BSP application HAP_DOCUMENT (appraisals)
Thanks
Sharath
Message was edited by: sharath raj

Hello
I have a similar problem. SAP Help suggests that there is a webdynpro application (sap.com/msseeproPersonnelDevelopment) that calls iview "com.sap.pct.erp.mss.personneldev_appraisals". However when i look in the portal content studio i only find "com.sap.pct.erp.mss.appraisals". When i look in the webdynpro content administrator i cannot see sap.com/msseeproPersonnelDevelopment. Does anyone know where I can download these?
Regards,
Johann.

How to find the Name of the BSP Application Being Invoked?

Hi ,
Is there any FM or method that would return the name of the BSP Application being invoked?
Say i have a method A which is being invoked by 2 BSP Application B and C. How do we determine which BSP is invoking the method A?
Any input on this regard will be of great help.
Thanks and Regards,
Pavithra

Hi,
this methods are not 100% efective but you may try it:
On runtime:
set an external breakpoint in your method A and run your application. When it stops, the debugger has many folders, so press the one marked with "Standard" and in section ABAP stack you see the different call steps that have been executed, including the application that is calling the method.
For this you must activate the new debugger (Utilities --> settings --> ABAP editor --> Debugging)
On development time:
Click on method A and press button Where-used list. In the incomming window press BSP applications.
Hope it helps.

How user will execute the BSP application I created...

Hi,
I have created a BSP application which has various pages with flow logic.
Now to execute it I use execute icon and then I get moved to web browser.
The application is working cool.
But what I am wondering is user is not going to go to code and use excute button to execute the code.
So how can he do the execution of page ?

You have lots of options (and no generally users don't go to SE80 and launch your application from there).
1. Give out the URL to your application. Users can launch the application directly from the URL in the browser. The URL could be stored in the Browser Favorites or as a desktop icon.
2. If you use the Netweaver Portal - create a BSP iView for the application and attach it to the users' role.
3. A BSP URL can be added as a link in the SAP Easy Access Menu. Under favorites, just choose Insert Other Object
4. You can create an ABAP Transaction code. In the program under this transaction code, you could host the BSP application in an HTML Control or open it externally in a browser via CL_GUI_FRONTEND_SERVICES=>EXECUTE. It is fairly easy to create a generic ABAP program to launch BSP application and receive the application name via a Transaction Code Parameter. You can build a specfic URL to a BSP application in code using CL_BSP_RUNTIME=>CONSTRUCT_BSP_URL.

The BSP application exists but is inactive

Hello,
Does anyone now why does this error happens?
The message number is SO2_TOOL264.
thks

Hello Raja T
The message error is "The BSP application exists but is inactive".
Then when I open this message it only appears "The BSP application exists but is inactive
Message no. SO2_TOOL264".
thks

I tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

i tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

pleeeeeeeeeeeeeeeeeeeeeeese I need an URGENT help,,, someone answer me back

How do I open photoshop? I have it downloaded and only the Adobe Application manager shows with the

How do I open photoshop? I have it downloaded and only the Adobe Application manager shows with the list of other software. I clicked on photoshop, but not responding.

Nobody can know. Your information is far too vague - no system info, no other details. Just saying that it doesn't work is not conducive to providing assistance...
Mylenium

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open.

InDesign files are compatible wih all the newer versions. A cs4 file sh
Could you answer a few questions to help us better understand the issue:
If you are trying to open the files by double clicking them, do they give any error??
Have you tried to drag a file into indeisgn, if yes what happends when you do that??
Is there any error message that you get??
Also if you create a new files in InDesign CC does it show up as grey like the cs4 files or do they open fine??

Hi, My mac book pro starts lag, after shut down is still the same. Every application is taking 3-6 seconds to open, if I type something in Word letter appears only after 2 - 4 seconds, Whats going on and how to fix it ?

Very slow performance
Even after shutting it down and restarting still the same.
Laggin a lot
Please help!!!

First, back up all data immediately, as your boot drive might be failing.
A possible cause of a slow user interface is a large set of image or video files on the Desktop with preview icons. If you have more than a dozen or so such files, move them to another folder.
Another possible cause is iCloud activity, especially Photo Stream synchronization. If applicable, uncheck all boxes in the iCloud preference pane and see whether there's an improvement.
Otherwise take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Select the 50 or so most recent entries in the log. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message. You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

After deleting enhanced view still the bsp application is showing in se80

Similar Messages

Maybe you are looking for