After detaching audio, audio and visual shift

After I detached the audio from the video in a trimmed clip, the audio and visual both shifted from what point in the clip they were located before, making the person repeat what they just said. How can I fix this? I know better than to hope for a magical preference setting that will solve everything, but why does this happen? And how can I fix it? Are other people experiencing this issue?

What part don't you understand?
I have a trimmed clip that I detached the audio from. The portion of the video and the audio that is being displayed is a different part of the raw footage (<1 sec off).

Similar Messages

Audio/video sync STILL off, even after detaching/extracting audio

So I know it's a well-known problem that the audio and video clips get out of sync upon exporting a movie out of the iMovie application. I also have seen that the solution for this problem is to detach or extract all and any audio clips. I've done this, and I'm still having the problem after exporting my movie (it plays fine in the application).
I detached/extracted my audio clips when I started making my movie, and have been altering them and working with them separately from the video for some time before exporting the movie. Is it possible this has made a difference? I have re-detached the audio multiple times hoping it will solve the sync problem, but with no success
Has anyone else had this problem? I would be so grateful for some help--it's making me crazy!
Thanks in advance.
Kyoko

I'm having the same problem. Imported clips from FlipcamHD. Everything plays fine in iMovie. I have titles, video clips that I've added music, and regular video clips with its own audio. It's a nine-minute video. I detached the audio from the clips that have audio and still the sync after export is not working.

When listening to an audio book it freezes after about 10 minutes. I have done a soft reset, I have deleted the audio book and re- installed. My music plays with no problem.

Using my ipod nano -when listening to an audio book it freezes after about 10 minutes. I have done a soft reset, I have deleted the audio book and re- installed. My music plays with no problem.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Static in entire video after detaching audio from clips

After exporting, I was having some audio/video sync issues with my 1 hour and 38 min movie.
It was suggested that I detach the audio from the clips...so I tried it on my 6 minute preview with good success. I exported the preview and the sync problem was fixed.
So I started detaching the audio to fix the regular 1h 38m movie. I got through most of the clips and then went back to play a certain section of the movie...and I noticed that now there is a bunch of static in the entire movie.
How do I get rid of the static?
This also has seemed to really slow the project down. Anything I try to do on the project and iMovie just tanks.

Thanks for your reply Geoff,
I basically have a soundtrack 3.28 minutes long which I want to be the only noise thats playing throughout my interchanging video clips, so I would like to completley move the audio from the all of the indivdual video clips that I am adding in, I thought the 'detatch audio' button would be the one for this, but as I continuously play back bits of the movie to prefect editing I can still slightly hear the sound from the individual videos that I am adding?
So frustrating, but Im sure thats its something real basic that I am missing.....

After detaching audio, how do I re-attach it?

I right clicked on a clip and selecte Detach Audio. Now I don't see (from the same popup menu) how to re-attach the audio back to the clip?
Thanks

Found a tip that might help you. If you select the clip you want to re-attach the audio of in the timeline and hit Shift+F, the exact selection of the clip will be selected in the Event Browser. You can then drag and drop the selection over the clip without audio and it will restore the audio to the clip. This may kill any video effects you may have added to the video, I'm not sure, but this will restore the clip to have both audio and video.

After Detaching Audio, how can you re-attach it?

Occasionally after detaching audio from a clip I need to re-attach it.
If I have done several minutes of editing in the meantime, using the Undo function is not viable.
Is there any quick and easy way to re-attach it as when Expanding and Collapsing Audio/Video?

https://discussions.apple.com/message/15664679#15664679

Audio in and audio out is not working in imac after i install lion 10.7

i have a imac i update my mac to lion 10.7
after that i open grageband and it sayes no adieo in and out are found
and i also loke in the grageband preference and i loke in Audio /MIDI
and audio output say no drive found and in is same thing
but on MIDI Status it sayes 1 midi input found
enebody know what will be the problem

Hi gusto,
I checked the above mentioned KB and the fix that worked for you is in the KB: https://help-internal.adobe.com/content/help/en/creative-suite/kb/acrobat-failed-launch-30 -days.html
Try running the patch again and see if that helps.
Regards,
Rave

Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

Nevermind. I figured it out.

After BIOS update failure and rollback, audio hot keys detect press but do not function

All other hot keys appear to function properly, only the mute/audio-/audio+ hot keys do not work.
I can press the key and the vertical volume indicator displays but it does not move.
At this time, I suspect this has to do with the failed BIOS update yesterday. All keys functioned properly before the failed BIOS update.
All HP drivers and software are updated to latest.
Another symptom I don't know may be related is that my bluetooth headphones have refused to connect once now without a full reboot. Bluetooth would connect and speaker audio audio would be muted, and sometimes "Manage Audio Devices" indicated connected to headphones but no headphone audo. Will warrant further watching.
The BIOS update was the most recent as of this writing and attenmpted to update only yesterday. I watched as the new BIOS progressed all the way to the point the BIOS attemnpted to flash and failed, then rolled back. I assume a backup was flashed because all my non-default BIOS settings had to be reset (non-UEFI boot, enable virtualization).
TIA,
Tony
BTW - I find it odd I can't just press a button to export/print my system configuration from the HP Support Assistant, I have to click every individual entry separately, but here goes...
The current running BIOS is F.63
The full results follows
HP ENVY TS 17 Notebook PC
5CG3331YPX
E9G82UA#ABA
Windows 8 64-bit
Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
12GB
4GB Micron Technology 1600MHz
8GB Hynix 1600MHz
Intel(R) HD Graphics 4600
1920 x 1080
60
1965 KBC Version 93.51
F.63
IDT High Definition Audio CODEC
Bluetooth Hands-free Audio

Seems after another day,
The problem resolved itself.
No reboot, no significant changes to the machine I can think of since my original post.
Just a spontaneous self-fix.
Thx,
Tony

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

No picture etc. on TV.after connecting S video and audio cables fr.HP dv4305US and old Samsung

No picture coming from TV.after installing S video and audio cables from HP 4305 US to 6yrs.old Samsung TV.Much appreciate info on how to correct this.Do I have to have cable TV or a digital TV.converter?

Hi eb
Welcome to Apple Discussions
Could be a bad Dynex adapter, return that one for another and/or cough up the extra $3 for Apples.
I'm now using a Mini-DVD to to DVI and a 21.5 LG monitor, but my Apple Mini-DVI to Video adapter and my 27" Sharp served me well for a couple of years.
See the Tip in > http://support.apple.com/kb/TA23844?
+Tip: To make sure that your iMac automatically detects the external display or projector, be sure you plug the adapter into the external display or projector before you plug it into the iMac.+
Dennis

After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

I ALSO just updated my brand new iphone 6 to 8.0.2, and I ALSO had my cellular service BRICKED.
All I get on the signal meter is Verizon 1x. Every so often 3G would popup and you could send a text (no calls though) but it's gone in seconds. So I can't send texts or make phone calls.
This phone worked immediately before the update and stopped working immediately after the update.
My neighbor has a iphone 5S. He updated to 8.0.2 lat week and had no problems UNTIL just this morning, when his phone stopped working - no cellular voice or data. He downgraded back to ios 8.0 but his cellular service never came back.
Called verizon - was told there were no service outages and then I got transferred to tech team.
Tech team had do all the Apple troubleshooting steps but nothing more. So they said "take it back."
So this BRAND NEW iPhone 6 phone is BRICKED because of iOS 8.0.2.
Thanks Apple!

Why does my audio jump all over the place after detaching it

in iMovie HD you could extract audio then work with clips over it, in 09 I can't do anything. I extract/or detach the audio, but it is still attached or something. if you put a clip in the project widow the whole thing moves over, not just the video. So I saw the tutorials and they said you can replace a clip. but no window opens up over the clip??? any help

After detaching audio, it is easy to drag the audio to some other place in your project.
If you want to put clip A on top of a portion of clip B while keeping the audio from clip B, this is easily done. It is called a cutaway in iMovie 09.
First go into iMovie Preferences and turn on the advanced tools.
Select clip A so that it has a yellow border around it. This can be from the Event or from the Project.
Now drag clip A and drop it on Clip B at the point where you want the cutaway to begin.
A popup menu will come up. Select "CutAway"
You are done, but you can fine tune it if you like.

Why is audio distorted and pulses after I import from Adobe Organizer to Adobe Premiere Elements 11

All the videoes I have collected this year from my iphone video, sony video camera an fuji water video camera work fine in the Adobe organizer but when I import to Adobe Premiere Elements 11 after a couple of clips max four the audio distorts and pulsates. I just purchased the software and have updated all the software. Thank you in advance I am so frustrated I feel I tried everything.

1st, Iphone won't easily edit http://forums.adobe.com/thread/881246
-and http://forums.adobe.com/thread/1011411?tstart=0
-and a fix http://forums.adobe.com/thread/934466
2nd, What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

Duplicate Audio on Export After Detach Audio

I'm working with a very short clip, about 2 minutes. In the clip the narration starts almost immediately. to soften the transition, I detached the audio, stretched it into the fade in, and faded it in as well. In the preview window the desired result is match perfectly. Problem is, when I export, I get two audio tracks, with about a 2 sec difference (the same length as my fade, surely not coincidentally). I've insured that the audio attached to the video is now muted, but it still exports with overlapping audios.
I'm on '11 with this weeks update already applied.
Oh also, when importing source material from a .vob, the audio is squelches and ends about 30 seconds into any clip now too.

Hi:
Please read the XP downgrade guide at the link below:
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
Your model's downgrade guidance can be found under "Difficult Models." There is a section on what steps need to be taken to install the audio drivers. Pay particular attention to installing the correct version of the MS UAA driver before installing the audio driver.
Paul

After detaching audio, audio and visual shift

Similar Messages

Maybe you are looking for