After Disconnecting AirPlay Mirroring, my Ext. Display Resolution Does Not Change!

Im on Latest MBP 15, using Apple TV3 and DELL 27' Monitor as a main display.
When Im trying to play video via AirPlay + AppleTV as a Mirroring or Extended Display, it does change main resolution of my DELL ext. Display from 2K to 1080p... And after that I can return my native DELL resolution ONLY after Rebooting (even several times).
DELL is connected to MBP with mini D-port to D-port cable, ClickTronic (good and expensive one).
Is there any ideas how to fix that?
Thanks.

Sounds like an OSX issue... try posting to the appropriate Mac forum.

Similar Messages

Resolution does not change after saving.

A previous answer does not help me. I save a file after changing size (inches) and resolution from default of 240ppi to 300ppi, when I reopen the file reverts to the original size. I use a Mac 10.6.8 Photoshop CS5 extended 12.0.4 x64.

If all you change is the document DPI resolution setting all the changes is print resolution and print size. The document size remains un-changed you sill have the same pixels you have before the resize. Only when you resample(interpolate) the number of pixels you have for the images does the the file size change. In fact you have a completely new image not a single old pixel exist all pixels have been interpolated to increase or decrease the number of pixels the image has.

Screen resolution does not change back after using a projector

Hi!
My office uses several different models of macbooks, but there is a small problem with all the Airs. When I have been using them with a projector I have to change back the screen resolution manually (go to the system settings and change resolution). On the macbook pros, however, the desktop restores themselves as soon as the projector is disconnected. It seems to me that this should be the standard behaviour of all macs, does anyone know why it is not working on the Airs?
Best regards
Erik

Hi Erik,
I had this problem on a MacBook and resolved it by recreating some plist files.
~/Library/Preferences/ByHost/com.apple.windowserver.xxxxxxxxxxxx.plist
~/Library/Preferences/ByHost/com.apple.preference.displays.xxxxxxxxx.plist
The xxxx's are your machine's EthernetID (MAC Address). I wouldn't delete, rather just move them to your Desktop and restart the computer. See if that resolves it.

HT201263 the "connect to itunes" screen is displayed and will not change

The "connect to itunes" screen is displayed and does not change after an update.

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT201343 i cant find airplay mirroring in my displays to select and my os is 10.7.5

i cant find airplay mirroring in my displays to select and my os is 10.7.5 now i have apple tv i want connect to it .how can i do

It should work once you upgrade if you also meet the Apple TV requirement.
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

IPhoto6 - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored from time machine, rebuilt the library and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline.

iPhoto6 on iMac running SL - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored the library from time machine, rebuilt the library from iPhoto and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline instead of the thumbnails. Does anyone have any other ideas on how to restore the thumbnails?

Try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Agent resolution does not agree with agents of task

Hi Guys,
I extended B.O-IDOCAPPL to ZIDOCAPPL to catch the inbound error for the IDOC.
The workflow gets triggered correctly when we get the inbound error.
In the workflow i created a custom display method....this is a dialog method. Now when the workflow comes to this point it gives the message in the technical log
<i>" Result of agent resolution does not agree with agents of task" </i>
<b>Now instead of calling this method if i just put a user decision it shows up fine in the users inbox.</b>
I have tried SWU_OBUF , Refresh from SWUS , Refresh from Inbox
Nothing seems to work, anyidea as to what's happening here ?
Message was edited by:
Abhishek Dhoundiyal

I have tried :
1.) hardcoding user ID
2.) using a role
3.) using WF initiator...
This is set up as a general task......
One interesting observation that i had... (If the below is irrelevant please ignore)
If i run the task via SWUS it executes but still does not evaluate the agents.. and then if i execute the workitem in SWIA it lets me execute...
Now if i trigger the workflow it executes but still does not evaluate the agents but it does not allow me to execute the workitem in SWIA , the technical log says workitem not found.

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.

ORA-01092: ORACLE instance terminated. Disconnection forced ORA-00942: table or view does not exist on 12C RAC

Hi Geeks,
I have encountered an issue while starting up my database on 12c RAC.
Till mount it goes fine but when i attempt to open it throws me an error.
Total System Global Area 1.5400E+10 bytes
Fixed Size                  4737560 bytes
Variable Size            2952791528 bytes
Database Buffers         1.2415E+10 bytes
Redo Buffers               26857472 bytes
Database mounted.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00942: table or view does not exist
Process ID: 11338068
Session ID: 1429 Serial number: 3
Here is the trace file output...
ORACLE_HOME = /oracle_home/app/orahome
System name:    AIX
Node name:      INS1
Release:        1
Version:        7
Machine:        00C8CCA74C00
Instance name: INST1
Redo thread mounted by this instance: 1
Oracle process number: 7
Unix process pid: 20381876, image: oracle@ins1 (TNS V1-V3)
*** 2014-11-27 22:49:20.892
*** SESSION ID:(197.5) 2014-11-27 22:49:20.892
*** CLIENT ID:() 2014-11-27 22:49:20.892
*** SERVICE NAME:() 2014-11-27 22:49:20.892
*** MODULE NAME:(sqlplus@ins1 (TNS V1-V3)) 2014-11-27 22:49:20.892
*** ACTION NAME:() 2014-11-27 22:49:20.892
2014-11-27 22:49:20.889716 : Start recovery for domain=0, valid=0, flags=0x4
*** 2014-11-27 22:49:24.580
Successfully allocated 32 recovery slaves
Using 3 overflow buffers per recovery slave
*** 2014-11-27 22:49:24.740
Thread 1 checkpoint: logseq 15, block 2, scn 3510749
cache-low rba: logseq 15, block 3
    on-disk rba: logseq 15, block 72, scn 3510824
start recovery at logseq 15, block 3, scn 0
*** 2014-11-27 22:49:24.981
Started resilvering redo thread 1 seq 15 blocks 72-73
*** 2014-11-27 22:49:24.994
Completed resilvering redo thread 1 seq 15
*** 2014-11-27 22:49:24.994
Started writing zeroblks thread 1 seq 15 blocks 74-81
*** 2014-11-27 22:49:24.994
Completed writing zeroblks thread 1 seq 15
==== Redo read statistics for thread 1 ====
Total physical reads (from disk and memory): 4096Kb
-- Redo read_disk statistics --
Read rate (ASYNC): 35Kb in 0.25s => 0.14 Mb/sec
Longest record: 0Kb, moves: 0/104 (0%)
Longest LWN: 2Kb, moves: 0/33 (0%), moved: 0Mb
Last redo scn: 0x0000.0035922b (3510827)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 151/176 = 0.9
*** 2014-11-27 22:49:25.007
KCRA: start recovery claims for 25 data blocks
*** 2014-11-27 22:49:25.039
KCRA: blocks processed = 25/25, claimed = 25, eliminated = 0
*** 2014-11-27 22:49:25.054
Recovery of Online Redo Log: Thread 1 Group 6 Seq 15 Reading mem 0
*** 2014-11-27 22:49:25.060
Completed redo application of 0.02MB
*** 2014-11-27 22:49:25.235
Completed recovery checkpoint
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 25/25 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 176/176 = 1.0
Recovery sets nab of thread 1 seq 15 to 74 with 8 zeroblks
*** 2014-11-27 22:49:26.000
2014-11-27 22:49:26.000433 : Validate domain 0
2014-11-27 22:49:26.001348 : Validated domain 0, flags = 0x0
*** 2014-11-27 22:49:28.315
Count of ofsmtab$: 0 entries
*** 2014-11-27 22:49:28.732
ORA-00942: table or view does not exist
ORA-00942: table or view does not exist
*** 2014-11-27 22:49:28.738
USER (ospid: 20381876): terminating the instance due to error 942

In my case the issue has fixed by executing the following..
grant SELECT on SYS.USER$ to XDB;
grant SELECT on SYS.USER$ to CTXSYS;
grant SELECT on SYS.USER$ to DVSYS;
grant SELECT on SYS.USER$ to LBACSYS;
grant SELECT on SYS.USER$ to APEX_040200;
grant SELECT on SYS.USER$ to DV_SECANALYST;
Refer the above screen shot...

I am unable to redeem my purchase of a Photoshop Elements 12 software license. After entering the redemption code and clicking on the Redeem button, nothing happens. No error message. Screen does not change.

I am unable to redeem my purchase of a Photoshop Elements 12 software license. After entering the redemption code and clicking on the Redeem button, nothing happens. No error message. Screen does not change.

try using a different browser, or contact support Contact Customer Care

After installing 10.7.2 update the OS does not boot.Any thoughts????

After installing 10.7.2 update the OS does not boot. I tried to recover from recovery hd disk but after 3 attempts I am still not able to download lion! Any thoughts????

Try the Lion Community, and bookmark the notebook community (this is not).
You will probably need to provide others with more information too.
Cloned backup? TimeMachine? using Disk Utilityh to repair Lion from the recovery partition (comnand r on startup)

Error: Result of agent resolution does not agree with agents of task

Hi,
I'm getting the error "Result of Agent Resolution does not agree with agent of Task". I'm passing the agents in Expression which I'm getting from Method in my previous step and passing to workflow container and it is getting passed to Expression. The userid is present in that container. And the Task is assigned as General Task but still I dont know what might be the problem. The ID is with 'US' prefix. Even if I give the userid directly in the Task, it shows the same error.
Regards,
JMB

Hi
Incase you are using different clients for development and testing, make sure in testing client, task is assigned as general task.
You may check the way the userid is passed. Please note that the US is object type and Object ID(user id) is different. Both of them should not be part of one string. So while you test, just pass the user id without a prefix US. Hope it will work for u.
Regards
Waz

Result of agent resolution does not agree with agents of task

Hello Experts,
I am trying to configure a workflow for Employee Travel expense, the Business object am using is BUS2089 for event CREATED.
And am configuring workflow task WS20000040 (Approve trip). and in the work flow builder I am assigning User as an Agent and fixing it to a user say "USER1" for Task 404 (Check trip facts) and for Task 416 (Approve trip facts) again am assigning User as an Agent and fixing it to user say "USER2"
Now when the Trip is saved using PR05, this work flow is triggerred - which is what i want and it sends work item to USER1, now when USER1 says Trip facts are consistent the work item should go to USER2 but here it is failing and the log says "Agent determination for step 0000000416 failed" and details say "Result of agent resolution does not agree with agents of task" which is SWF_RUN 544
Can you guys help me by telling where am going wrong. Am i missing some configuration somewhere.
I have changed the Task properties - Attributes i have changed the task as a General Task,(i did it by navigating through Control Tab of the task)
appreciate your response.. Thanks
Usman

Thanks Novjot
I made the task as a general task and i see a gree light adjacent to it, but still it doesn't work.
the way i made it as a general task is as follows:
1. in the navigation area - select task 416
2. In the right hand side, on Control Tab in Task properties, click on the Red button and maintain Agent assignment
3. In Agent Assignment change attributes to General Task - instead of General Forwarding allowed.
save and activate, and generate runtime version
Is this correct or any other way?
Thanks
Usman

After Disconnecting AirPlay Mirroring, my Ext. Display Resolution Does Not Change!

Similar Messages

Maybe you are looking for