After doing a Foxfire update this morning, I now get a second icon on my tool bar when I change from news to gmail?
After accepting an update this morning from Mozilla, I now get a second icon on my bottom toolbar when I change from either news to gmail or from gmail to news. I tried restarting my computer but it still does it.
Thankyou mccashin:
I checked the home page assignment in preferences and found that the errant site had been appended to the normal (google) home page address. Incidentally, I had basically solve the problem within a session by erasing all history related to bbc. Without your fix I would been back to the same error next time I started Firefox from scratch. Thanks again.
Similar Messages
-
This morning I noticed my time capsule was blinking amber. I opened utility and I found that all of the airport devices needed a firmware update.
I ran that with no problems. I then found tonight that my time capsule had "delayed" backup and said it couldn't find the disk. I re-pointed it to the TC and it says I have no backups and wants to start from scratch. This is a concern and a bit annoying.
Any way to find my previous backups and reconnect it?
Thanks.Looking in the time capsule preferences, it looks like the name of the disk has slightly changed to add a "3" at the end. Not sure how to change it back.
When I use airport utility and look at the disk, it says something like half the disk has been used, so obviously my backups are still there. Just not sure how to re-connect so backups aren't lost or duplicated. -
i did the 10s 7 update this morning and now my ipad wont work. I can hear siri tell me all the things i am touching on my screen but it wont unlock and allow me to enter my password. Its as if the screen doesnt work
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
After updating my iPad this morning, my keyboard keeps going from active to inactive on websites.
As long as you are sure that you have Bluetooth turned off .....
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
See if that helps. -
Update for Windows was run this morning---it actually made me run it twice. I was initially able to use my phone but now I get nothing but the battery/power cord symbol. The power button doesn't work at all. I have tried soft boot of the down volume and power button. Seems to reboot but same screen appears. I cannot access anything on the phone. Is there any help on this?
Hey there, javadan! Thanks for letting us know about the problem with your software upgrade. I'm very sorry for the issues you're having. Based on the two attempts to process, I would have to say there was a problem with both install attempts. You may need to process a factory reset. Which model device do you have?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
the icloud was not able to update because my information was different than apple.
now that i cleared up the icloud problem, how to i redo the software update?
-
After doing last Mavericks update, Messages is not working properly
Since yesterday, after doing last Mavericks update, Messages is not working properly - the Dock icon is not bouncing nor showing any number for new messages. Very annoying, since I usually have Messages on background while working and I now i don't realize if people is chatting me unless I open the messages wondows.
Hi,
Check System Preferences > Notification is set for Messages
In Messages > Preferences > General Section change the Sound option for Message Received.
Restart the app and test this sound is (still) playing.
Place app in background an iMessages "yourself" form your iPhone.
Does the sound Play ?
10:18 pm Wednesday; November 13, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Did update this morning now won't restart
Did update this morning. Now MacBook Pro won't restart. Any suggestions?
Execute SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
See if that restores life. If not an Apple store genius bar appointment may be needed.
Ciao. -
my Photoshop CS6 is opening as Photoshop cs6 extended trial after it updated this morning I DO NOT HAVE PHOTOSHOP CS CLOUD
Permanent reverts to Trial with CC ad.
This happens often. Don't panic. Your serial number is still good, you simply need to re-enter it and you do not need to purchase anything. Follow these steps:
On receiving Trial/Trial Expired screen
Make sure that you are online
Click on license this software
Perpetual product owners: Log in with adobe ID and enter product serial number
Product should be licensed successfully -
Kuler disappeared after the update this morning
Hi,
I use Illustrator CC in French vesion. After the update this morning (06/10/2014), I cannot find my Kuler platte anymore.. However I still have accès to the web site.
Thanks for your help !
YaqianHi Ben,
Check for the panel "Color Themes". Kuler has been re-named.
Thanks & Regards,
Raghuveer -
After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library, rebuliding and repairing the thumbnails but they are still distorted. Has anyone else experienced this and found a solution?
What upgrade did you apply? As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT -
Hi - My ipad 2 automatically backed up this morning. After which I stupidly updated it to ios7.1. Can I erase the ipad and redownload the last backup from this morning from icloud?
No, there is no way to down level the iOS .
-
Can't open Safari after downloading update this morning
Macbook pro, OSX Mavericks
Can't open Safari. Did an Apple update this morning and when i click on Safari, it just bounces. won't openIf you installed "CleanMyMac," the instructions for removing it are linked to my last comment. If it's something else, see below. If you don't know what you installed, ask for instructions.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software. -
My MacBook Pro 10.6.8 prompted me of a new itunes update this morning, so i downloaded it. Since then itunes has been starting up randomly on its own, and starts playing the first song on the list. I pause the song, and it resumes it on its own again. I'm not joking. So, I end up quiting out of itunes; but, it starts right back up again on its own. After quiting out of the app a few times, it eventually stops reopening; however, about an hour later (or less) it opens again. HOW DO I MAKE IT STOP? I'm just about to delete itunes, because I've had enough of this crap. I hope someone can help. I've restarted the laptop, and it seemed like that fixed it, then itunes started up doing the same thing again an hour later. ituneshelper is unchecked; bluetooth is off; i only have speakers and a mouse plugged in (also charger).
Read this Apple Discussion Thread and possible solutions. The audio jack has been the main culprit, also certain sync and automation settings including connected remotes.
-
Started a Itunes software update this morning which didn't work. Now Itunes will not open at all. I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."
There are a couple of options that I know of to fix the issue.
One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes. You will need to read the instructions in the thread to see the correct uninstall order.
Second option is use System Restore to set your system back to a date prior to the iTunes update. I did this before finding the thread mentioned above.
Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer.
Message was edited by: karivers
Maybe you are looking for
-
Activity Type set up for cost center
Hi All , While creating a task list i m getting a message Activity type is not set up for cost center in the year 2008 Message no. CR062 How could i set the activity type for cost center? Plz tell the procedure. regards sunil Edited by: su
-
My keyboard and trackpad occasionally do not respond for 1-2 minutes.
I bought my MBP new in July of this year and since I've had it the keyboard and trackpad have randomly stopped responding. It happened when I had lots of programs running at once and when I wasn't running anything. I took it to the Apple store and th
-
Function to return incompleteness log of Delivery
Hello, We use the function BAPI_OUTB_DELIVERY_CREATE_SLS to automatically create deliveries for our mobile devices. On occasion, the log "Batches / valuation types not completely allocated" is reported for items with incomplete or no batch splits at
-
Headquarter Error : Property 'DocEntry' of 'Document' is read only
Hi All, I had followed "How to Build & Run a B12B1 Scenario" Documentation and until I created a biz package and activated successfully. But when I try to create a PO in the subsidiary system, It sends ok, but I get the following error in admin conso
-
Trying to access a sever from my school...
Here's the scoop. I'm trying to access this server; Host: 204.209.44.8 Port: 9000 Now here's the message I get when I try. java.security.AccessControlException: access denied (java.net.SocketPermission your.web.server.com resolve) at java.security.Ac