After doing a hard reset, the log records an sms m...

I decided to hard reset my 5530 and format the memory for the first time because it was running slow and the music library takes to long to refresh.
To my surprise after doing a hard reset there was an enrty on the log that show an sms message was sent to an unknown number the time show it was sent after setting up the time in the phone setup.
Just wondering if its a virus or something cause i bought the phone brand new about 2 months ago, and i just realized it just now after a couple of months.
Solved!
Go to Solution.

It's not a virus.
It was the phone registering with the my nokia service again, like it did the first time it was ever switched on with a sim inserted.

Similar Messages

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • What does a hard reset clear out? / can't update O...

    Hi,
    I'd like to get my phone back to it's original state.  But doing a hard reset won't do that really as I've updated the firmware since then for example and I'm pretty sure I'll have the same firmware after the reset.
    My problem is that I get an "internal error" when trying to update the Ovi maps to 3.4 using Ovi suite.  If I try to do it directly on the phone I just get a generic failure message with no information.
    I've removed the existing Ovi maps from the application manager but I can still run Ovi maps!  It's all gone a bit strange so I thought I'd reset but I don't think it's really going to clear everything out.  So I might be back where I started but minus some of the things I wanted on my phone.  So I'm not sure what a reset really does.
    Any ideas how I can get out of this state?
    Cheers.
    Peter.
    Solved!
    Go to Solution.

    Right - I did a soft reset and tried to install Ovi maps 3.04.  It told me to clear out some memory.  I'd been doing that at the weekend by uninstalling applications but the main problem was 50Mb of "other files".  So I only had about 8Mb free as there's around 25Mb of applications and misc other stuff (I'd moved my messages off there at the weekend).
    So I did a hard reset and 3.04 has now installed.  Of course - It'll now take me some time to get everything back the way it was!
    Perhaps it was a lack of space on C: that was the problem all along.  Not sure how I would have got rid of that "other files" space without a hard reset.

  • My iPhone 3gs sudden turned off and after a few hard resets, and plugged in over night... still nothing. What else can I do?

    The phone was not dropped or wet, but jut went off, it's charged all night and still after a few hard resets it will not switch on? is it dead?

    Sounds like you need a new battery. My 3GS got the point of just turning off rather than shutting itself down properly so I knew due to the age of the phone it was the battery.
    I got an ebay battery replacement for £12 + a set of tools for the job for about £4.
    But please note relpacing the battery is not for the faint hearted!

  • After doing a factory reset my iphone 3g recongnises o2 as its primary carrier but i cant get any signal at all so please anybody do know how to fix this?

    after doing a factory reset my iphone 3g recongnises o2 as its primary carrier but i cant get any signal at all so please anybody do know how to fix this?

    hi peter, that was the plan to get o2 to unlock the which they do 4 £15 but as i cant get any network signal signal of them (but i am getting a 3g signal as i can access the internet???) o2 are saying there is nowt they can do. i still get no signal after doing a factory reset which in a perfect world should reset my network back to o2 but no signal only getting 3g.im at lost now on how to restore the network im sure its something to do with the carrier signal ?

  • Bought the Iphone 6   2days ago. My mac pro finds the phone on bluetooth but phone will not discover ANY bluetooth divices. Have hard reset the phone and restarted as well. nothing. Any suggestions or issues. This is the first apple phone I have owne

    Bought the Iphone 6   2 days ago. My mac pro finds the phone on bluetooth but phone will not discover ANY bluetooth divices. Have hard reset the phone and restarted as well. nothing. Any suggestions or issues. This is the first apple phone I have owned. Am not very happy that Bluetooth would present a problem.

    I can't help with the other devices but note that an iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
    If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

  • The image of my Macbook freezes and I have to Hard reset the system. What can I do?

    I have a macbook pro13" 2009 with a Bootcamp System Mountain Lion/Windows 7. If I work in Windows 7 I do not have any problems, but if I work with MacOS my Image freezes after some time, with quicktime immediately and I have to hard reset the system.
    Can anybody tell me, what I can do?

    I have already updated everything. But it did not help.

  • What is the 4 digit password to hard reset the iphone 4s

    What is the 4 digit password to hard reset the iphone 4s.
    I'll sell my iPhone and so I want to delet all data and reset all the original config.
    The 4 digit passwor required is not the same I use to open/unblock it.

    Malopes2000 wrote:
    I'll sell my iPhone and so I want to delet all data and reset all the original config.
    See  Erase your device  Here  >  http://support.apple.com/kb/HT4137
    Go to Settings > General > Reset > Erase all content and settings
    Also... See the wjosten post here...
    https://discussions.apple.com/message/20294697

  • Error – SAML Single Logout request does not correspond to the logged-in session participant

    We are relatively new to ADFS, having set up working rp-trusts with three partners in the last few months.  Our 4th partner is proving problematic.  Single sign in works, but the ADFS
    responds the single logout request from the RP with a status of Requester.  The ADFS event log shows
    The SAML Single Logout request does not correspond to the logged-in session participant.
    Requestor: https://test-sso.rp.com/fed/sp
    Request name identifier: Format: urn:oasis:names:tc:SAML:2.0:nameid-format:persistent, NameQualifier: http://fs.idp.com/adfs/services/trust SPNameQualifier:
    https://test-sso.rp.com/fed/sp, SPProvidedId: 
    Logged-in session participants:
    Count: 1, [Issuer: https://test-sso.crmondemand.com/fed/sp, NameID: (Format: , NameQualifier: 
    SPNameQualifier: , SPProvidedId: )] 
    This request failed.
    User Action
    Verify that the claim provider trust or the relying party trust configuration is up to date. If the name identifier in the request is different from the name identifier
    in the session only by NameQualifier or SPNameQualifier, check and correct the name identifier policy issuance rule using the AD FS 2.0 Management snap-in.
    The LogoutRequest looks like this
    <samlp:LogoutRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
    Destination="https://fs.timken.com/adfs/ls/"
                    ID="id-HAScmHCfwfuYk76bce6YBfO2uOM-"
    IssueInstant="2013-01-14T13:24:04Z"
    Version="2.0">
    . . . cert, etc. omitted . . .
    <saml:NameID xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion"
    Format="urn:oasis:names:tc:SAML:2.0:nameid-format:persistent"
    NameQualifier="http://fs.idp.com/adfs/services/trust"
    SPNameQualifier="https://test-sso.rp.com/fed/sp"
    >jsmith</saml:NameID>
    <samlp:SessionIndex>_df13d31b-162e-42e1-8331-f36be6bf1194</samlp:SessionIndex>
    </samlp:LogoutRequest>
    The session index and the username in NameID matches the Response we got from our AuthRequest.  I don't know how to figure out what ADFS thinks does not match. 
    Any suggestions would be appreciated.
    For completeness sake, the Response to AuthRequest looked like this.
    <Subject>
                <NameID>jsmith</NameID>
                <SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">
                    <SubjectConfirmationData NotOnOrAfter="2013-01-14T13:28:52.199Z"
                                             Recipient="https://test-sso.rp.com/fed/sp/authnResponse20"
                                             />
                </SubjectConfirmation>
            </Subject>
            <Conditions NotBefore="2013-01-14T13:23:52.183Z"
                        NotOnOrAfter="2013-01-14T14:23:52.183Z"
                        >
                <AudienceRestriction>
                    <Audience>https://test-sso.rp.com/fed/sp</Audience>
                </AudienceRestriction>
            </Conditions>
            <AuthnStatement AuthnInstant="2013-01-14T13:10:43.826Z"
                            SessionIndex="_df13d31b-162e-42e1-8331-f36be6bf1194"
    >

    Okay, here are the relevant SAML messages.
    The <AuthnRequest>
    <samlp:AuthnRequest ID="_ced78e65-14d2-4c4d-8417-51f664a9e2e3"
                        Version="2.0"
                        IssueInstant="2013-02-04T13:29:20.887Z"
                        Destination="https://fs.timken.com/adfs/ls/"
                        Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
                        xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
                        >
        <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://fs.timken.com/adfs/services/trust</Issuer>
        <Conditions xmlns="urn:oasis:names:tc:SAML:2.0:assertion">
            <AudienceRestriction>
                <Audience>https://test-sso.salesdemand.com/fed/sp</Audience>
            </AudienceRestriction>
        </Conditions>
    </samlp:AuthnRequest>The AuthnRequest Response<samlp:Response ID="_890f3128-6cae-414e-8272-30cde3bda94a"                Version="2.0"                IssueInstant="2013-02-04T13:29:29.748Z"                Destination="https://test-sso.salesdemand.com/fed/sp/authnResponse20"                Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"                xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"                >    <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://fs.timken.com/adfs/services/trust</Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success" />    </samlp:Status>    <Assertion ID="_82f82c5c-2653-4e18-9308-349ebeb67743"               IssueInstant="2013-02-04T13:29:29.748Z"               Version="2.0"               xmlns="urn:oasis:names:tc:SAML:2.0:assertion"               >        <Issuer>http://fs.timken.com/adfs/services/trust</Issuer>        <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">            <ds:SignedInfo>                <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />                <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />                <ds:Reference URI="#_82f82c5c-2653-4e18-9308-349ebeb67743">                    <ds:Transforms>                        <ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />                        <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />                    </ds:Transforms>                    <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />                    <ds:DigestValue>RxZZLlbdh5eD6Ht4+aVna3Rtbnc=</ds:DigestValue>                </ds:Reference>            </ds:SignedInfo>            <ds:SignatureValue>Es8LAN9noqGIJEbgZe/...XW8LAv5Mgr3tOXpHRlcsJNss/A==</ds:SignatureValue>            <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">                <ds:X509Data>                    <ds:X509Certificate>MIIFDDCCA/SgAwIB...</ds:X509Certificate>                </ds:X509Data>            </KeyInfo>        </ds:Signature>        <Subject>            <NameID>mooreta</NameID>            <SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <SubjectConfirmationData NotOnOrAfter="2013-02-04T13:34:29.748Z"                                         Recipient="https://test-sso.salesdemand.com/fed/sp/authnResponse20"                                         />            </SubjectConfirmation>        </Subject>        <Conditions NotBefore="2013-02-04T13:29:29.732Z"                    NotOnOrAfter="2013-02-04T14:29:29.732Z"                    >            <AudienceRestriction>                <Audience>https://test-sso.salesdemand.com/fed/sp</Audience>            </AudienceRestriction>        </Conditions>        <AuthnStatement AuthnInstant="2013-02-04T13:29:29.545Z"                        SessionIndex="_82f82c5c-2653-4e18-9308-349ebeb67743"                        >            <AuthnContext>                <AuthnContextClassRef>urn:federation:authentication:windows</AuthnContextClassRef>            </AuthnContext>        </AuthnStatement>    </Assertion></samlp:Response>The LogoutRequest<samlp:LogoutRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"                     Destination="https://fs.timken.com/adfs/ls/"                     ID="id-uvoTioVCLdMycE88o-6CU5RrSNM-"                     IssueInstant="2013-02-04T13:29:57Z"                     Version="2.0"                     >    <saml:Issuer xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion"                 Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity"                 >https://test-sso.salesdemand.com/fed/sp</saml:Issuer>    <dsig:Signature xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">        <dsig:SignedInfo>            <dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />            <dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />            <dsig:Reference URI="#id-uvoTioVCLdMycE88o-6CU5RrSNM-">                <dsig:Transforms>                    <dsig:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />                    <dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />                </dsig:Transforms>                <dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />                <dsig:DigestValue>ZT0yQqiaL2dD2a7rt6ywJ9EoM1I=</dsig:DigestValue>            </dsig:Reference>        </dsig:SignedInfo>        <dsig:SignatureValue>Z7F7zYS31y1K48FbUHevJT86+txOlPM9awlHiMNj1TiMxRAEVz1rOj2uG0oVMd7NkblkneCrE8aVtJuebdUY4Q0DAcXR8lSTuNEFocT2R6eCIwQb48xQqQMs8ZE6siPsPFMS+QAhpgDom/IY61L/.../NNxVg==</dsig:SignatureValue>        <dsig:KeyInfo>            <dsig:X509Data>                <dsig:X509Certificate>MIIFxTCCBK2gAwIBAgIQAN+.../G6p95pNm1ZAqroUjufLeHO4q34Mx3xNyw0tmyjmWgkxY11Pa+M0gCeLOdLzxafIOXUFXOhKfOUg4Jp4S+/sCVcd9fBDPvfEHSr8uMmQC2IdQaRE7IvZdRF0OUP+l1MpRBkMsy98hPXTBK6n1ivklOxzmWie88jav8gzjWhwQC5Ia2/JNYxVBkPsNkRw86n8KBnlsumU9EV0dAeXTOaehKtG+RNnD1Gt4Y34TQccaIbf7OTLisY4kMkjZbRu3sJnX9KjM=</dsig:X509Certificate>            </dsig:X509Data>        </dsig:KeyInfo>    </dsig:Signature>    <saml:NameID xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion"                 Format="urn:oasis:names:tc:SAML:2.0:nameid-format:persistent"                 NameQualifier="http://fs.timken.com/adfs/services/trust"                 SPNameQualifier="https://test-sso.salesdemand.com/fed/sp"                 >mooreta</saml:NameID>    <samlp:SessionIndex>_82f82c5c-2653-4e18-9308-349ebeb67743</samlp:SessionIndex></samlp:LogoutRequest>The LogoutRequest Response<samlp:LogoutResponse ID="_bf7199a8-3248-4201-9ca4-609bec5404d6"                      Version="2.0"                      IssueInstant="2013-02-04T13:29:59.076Z"                      Destination="https://test-sso.salesdemand.com/fed/sp/samlv20"                      Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"                      InResponseTo="id-uvoTioVCLdMycE88o-6CU5RrSNM-"                      xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"                      >    <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://fs.timken.com/adfs/services/trust</Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Requester" />    </samlp:Status></samlp:LogoutResponse>The ADFS Error Log EntryThe SAML Single Logout request does not correspond to the logged-in session participant. Requestor: https://test-sso.salesdemand.com/fed/sp Request name identifier: Format: urn:oasis:names:tc:SAML:2.0:nameid-format:persistent, NameQualifier: http://fs.timken.com/adfs/services/trust SPNameQualifier: https://test-sso.salesdemand.com/fed/sp, SPProvidedId:  Logged-in session participants: Count: 1, [Issuer: https://test-sso.salesdemand.com/fed/sp, NameID: (Format: , NameQualifier:  SPNameQualifier: , SPProvidedId: )]  This request failed. User Action Verify that the claim provider trust or the relying party trust configuration is up to date. If the name identifier in the request is different from the name identifier in the session only by NameQualifier or SPNameQualifier, check and correct the name identifier policy issuance rule using the AD FS 2.0 Management snap-in.

  • Anyone knows how to hard reset the Aspen manually?

    Anyone knows how to hard reset the Aspen manually?
    Need help to Hard reset SE Aspen.

    original language: russian
    Столкнулся со следующей проблемой.
    После установки нужной мне программы, телефон дальше логотипа "гринхарт" не грузится.
    Прошу подсказать как сделать мастер ресет при помощи клавиатуры. Вариант через SEUS не предлагать, т.к. нет стабильного высокоскоростного интернет-соединения.
    Заранее благодарю.

  • All-In-One C4780 screen is stuck on a loop. How can I hard reset the printer?

    I have a C4780 and am running Windows 7. I have had the printer for 2 years and never had a problem until recently. I have been unable to print for months because the touch screen on the printer is stuck in a loop. I first noticed the problem because I could hear random beeping and printer movement from the other room. It was doing it all on it's own. There were no changes to the computers, wireless or anything. I had just used it 2 weeks prior to print a passport photo and it worked fine.
    It thinks I am trying to print from a memory card and asks me to insert the card. Then it thinks I am trying to print a passport photo. Then it thinks I am scanning and asks me to place the photo face down. (etc, etc) If I try to hit cancel on any of the screens, it moves on to a different task it thinks I want done. If I try to follow through with the task it wants to do, it cancels it on it's own and moves on to another task. It will also move through the screens and tasks without me around. It moves so quickly through the screens that when I do try to get to a certain screen, I sometimes can't, because the printer has taken off in a different direction of screens all on its own.
    All software is up to date.
    I have tried turning it off, unplugging it, waiting, plugging it back in, turning it on.
    I have tried unplugging it while it is on, waiting, plugging it in and turning it on.
    I tried a semi-full reset by pressing bottom left 4 times. It was actually really difficult because the printer kept changing screens randomly while I was doing it. I finally got it to do the reset. It got to the "now printing alignment page..." screen and then just moved on to the main screen. Never printed the page. Shortly after that it started doing the screen loop with wireless settings. And now it is back to doing a loop through all the screens again. 
    It seems to be pushing buttons on its own.
    Does anyone have any idea of how I can fix this? Is there a way to do a hard-reset on this printer? Restore it to factory settings? Or doing you think there is something physically wrong with the touch screen where it is actually pressing buttons on it's own?

    I'm having the same problem, including paper running through the printer randomly. I believe I completed a semi-full reset that (so far) has stopped the paper going through the printer. And, the random changes on the touch screen seem to have stopped too. But, the touch screen still lights up and goes dark randomly, whcih leads me to believe that all is still not well.
    I too would like to try and hard reset if one is possible on this machine.

  • ADF application hangs after  $$added root$$ message in the logs

    Hi ADF Gurus,
    We have an ADF application which freezes after we create a row in a particular VO,
    When debugged in Jdev, the application seems to hang when either of the below log messages appear. Does anybody know what these messages mean? Just hoping for some hint as to where the problem might lie. The table where the new row is added has about 150,000 records in it
    Log messages:
    <PCollNode> <checkForSplit> [50545] $$added root$$ id=-2
    <PCollNode> <checkForSplit> [50546] $$added root$$ id=-73
    <PCollNode> <checkForSplit> [50636] $$added root$$ id=-2559
    Environment details:
    Jdev: 11.1.1.5.0
    Database:11g
    Thanks
    -Venkat

    duplicate post: ADF application hangs after  $$added root$$ message in the logs

  • After doing a phone reset iphone wont come on.

    I reset my 3g phone and now it wont come on. it is stuck in apple logo phase. where you see it trying to come on but the wheel stops spinning after a few mins and it stays stuck i try a hard reset but it just does the same thing all over again

    Connect the iPhone to your computer. Launch iTunes.
    Right or control click the iPhone under Devices left side of the iTunes window then click Restore.
    If that doesn't work, help here >  Unable to update or restore

  • Hard reseted the N97 mini NOW WHAT????

    I got the white screen and blue Nokia label on my recently bought N97 mini.  The advice was to hard reset it.  O.K I did it now it randomly works.
    My questions:
    Is this a hardware issue?  If not how can it be solved?
    The phone came with various applications from factory, now how can I restore them, not the ones I installed but the ones the phone had before the hard resetS.   where are they?

    Most should be available at Ovi Store or elsewhere on the web, things like games and video samples you may not be able to get back. I would suggest you install any apps you can on E not C.Also before setting everything up I would update/re-install the latest software with Nokia Software Updater.
    As for 'randomly working' what do you mean ? And how did you reset the phone ?
    Whenever I reset my phone (which, unfortunately is quite often with the N97) I first back up my contacts, calendar and notes, NOTHING ELSE, backing up settings etc can result in re-installing a 'problem'. I then dial *#7370# followed by 12345. After the phone re-boots I set up the phone settings, motion sensors, auto lock, message storage point (E not C) ringtones etc. Then I re-install my contacts and calendar, and then any applications or themes I want (everything possible on E) and the phone will be like 'new'
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • T2 Digitizer frozen after soft,warm,hard resets.Can not get it to calibrate at all.

    My T2 occasionally has to be recalibrated. I downloaed DigiFix some months ago and it seemed to help a bit. I hot synced my data last night and all was well. This morning I could not tap my screen to access anything. I tried cleaning carefully around the screen edge, gently cleaned the screen ( no visible damage to the screen noted ), performed a soft reset ( which usually worked ), a warm reset, followed by a soft reset and finally a hard reset ( kept data ) followed by a soft reset and then the big one, a hard reset with loss of data followed with 5 soft resets in a row. I found through the forum a T2 update which I downloaded and is ready to be installed when I next hot sync.
    The unit is now frozen with the x in the starting position in the top left corner. Despite my efforts to gently tap all around the X, I can not get it to recalibrate or even get off the calibration screen. If I could just get back to any regular screen, I could get my data back and install this T2 update.
    I also downloaded Pocket DVD studio a week ago and have been able to upload .avi files for viewing videos on my Palm. I works beautifully. I think I still have the original Kimoma player on my T2, but never really like it. Can anyone PLEASE help me out? This T2 update is supposed to help according to the infor I found in forum....MANY THANKS!
    Post relates to: Tungsten T2
    This question was solved.
    View Solution.

    Thank you for the fina advice. It worked and my T2 is now working perfectly. I think the real trick is using cheap copier paper, not the higher grade stuff or a business card for the cleaning routine. I floded the paper lengthwiase and put a sharp crease in before cutting into little work strips. It took a lot of patience and time to perform a proper cleaning, but it was worth it. Seems that the smallest bit of anything which get trapped under the bezel will throw the T2 into a stupor. Many thanks your your fine advice.....Rgds,John Brown
    Post relates to: Tungsten T2

Maybe you are looking for