After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?
After downlaoding the lastest software for my iphone, it could not be activated because the phone was showing "No Service". Please want else can i do?
Thank you ProjectVRD. But this has not soloved the problem. It still shows no service even with my sim card well inserted. Even tried using sim card of another service provider thinking the problem could be from the service provider, it wasnt working still. PLEASE APPLE HELP ME.................
Similar Messages
-
IPhone 4S could not be activated because the activation server is temporarily unavailable
If you got the "scary" message that you could not activate iPhone 4S neither by Wi-Fi or iTunes, I want to share my experience:
I decided to reset my iPhone 4S, and used "Erase All Content and Settings" under the reset menu (Settings/General/Reset), I was hoping that the erasing just does that, but for me the nightmare started!
I was taken to the activation screens, and begun with the welcome one, choose language, choose location services (later on it also disappears) and selecting Wi-Fi and/or iTunes for activation.
I chose a Wi-Fi network the process started, and gave me a message that it will take about three minutes to activate iPhone, few minutes later a screen with this message appears: "Your iPhone could not be activated because the activation server is temporarily unavailable."
Then, I decided to try the activation using iTunes…
Using iTunes, after few minutes, it shows the following message: "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later."
I tried several times in both ways, trying 4 different Wi-Fi networks and 3 different computers in the whole process, and I was going desperate! I started to find out some info about this trouble over the Internet, and guess what? I was not alone! But I did not find any answer or solution either!
Finally, I joined Apple Support Communities, and started searching with no good luck at all, until I found (many hours later) this old (2009) solution:
+Do a DFU recovery:+
+1. Open iTunes.+
+2. Connect the iPhone+
+3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
+4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
+5. Follow the prompts to restore the iPhone.+
(THANKS A LOT!!! modular747 and Easily Easy, you saved me!!!)
Then I suggest everyone to use this, of course it will erase everything, but you may be able to recover your data from your last backup, or you can also choose to configure iPhone as a new cell phone.
The process took me about 92 minutes, but it was worth it, now I own an unlocked iPhone 4S (it was an AT&T when I purchased from Apple Store in November) and is working perfectly!
Hope it is useful for all of you facing this trouble!
Good luck and enjoy your iPhone then!I tried the process and was happy to note that there was some process that I managed to start because the process did start ...
However to my disappointment, landed back at the same status which says
We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care
I was using a GEVEY sim unlock with iOS 4.1 since (almost) last 2 yrs now in India on Vodafone. But as Apple designed it, there were several apps including Whatsapp, Facebook, Gmail and LinkedIn that stopped functioning due to the iOS updates and the subsequent (I guess 'mandatory' App updates). Finally yesterday I thought of updating to the iOS 6. As soon as I did that, I have been left with no choice but to see the above message.
The process by jhidrowoh starts corectly but iTunes doesnt give you the option of restore only ... it is forcefully clubbed with update and the button that is displayed in the dialog box that appears on pressing 'Restore' in teh recovery mode, shows 'Restore and Update' and as soon as the iPhone is restored, it automatically updates the iOS as well to iOS 6 and hence leaves you hanging in the stale situation.
Guys ... Need the data desperately ... Can anybody please help??? -
HT201407 iphone says could not be activated because the activation server is temporarily unavailable
i tried to activate my iphone but it says that could not be activated because the activation server is temporarily unavailable.
Insert Official carriers SIM in the phone to Activate. After Restore / Update activation is required on all iPhones
-
I am trying to update my Iphone 3 and when i get to the activation step after a few minutes it shows a message that says " Your iPhone could not be activated because the activation server is temporarily unavailable. Try conenecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
If the problem persist, contact apple support at apple.com/support
I been trying for a few times now and I keep getting the same message. How can i fix it? now my phone doesnt work.These are the steps mentioned in the article iPhone: Troubleshooting activation issues
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance. -
I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?
You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
After update and restore i am getting a message like ,Your iphone could not be activated because the activation server is temporarily unavailable.also i am getting no service message and also connected to wifi
mine is and before what the other guy wrote, it said your iphone could not be activated because we could not reach the server
-
"Your iPhone could not be activated because the activation server is temporarily unavailable." this massage showing after i update through itune
See this discussion.
https://discussions.apple.com/message/21189708 -
Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.
Hello Amarchand Sharma,
Are you working with a Windows computer? If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
http://support.apple.com/en-us/TS3221
Regards,
Judy -
I have downloaded and installed the new ios7 software on my iphone 4s but im having trouble getting through the activation process i keep getting the message "iphone could not be activated because the activation server cannot be reached"? any suggestions?
The activation servers are probably overloaded with everyone trying to update to iOS 7 today. You might need to wait and try again later.
-
I cannot configure my phone after just updating to ios 5, it says 'your iphone could not be activated because the activation server cannot be reached' i also cannot connect to itunes on my computer,it says 'your sim card is not supported' what can i do?
natalieduffy wrote:
it says 'your iphone could not be activated because the activation server cannot be reached'
Typically this indicates a device that has been hacked to be unlocked or jailbroken.
If that is the case, no support can be provided here. -
I am having problems activating my daughter's iphone. It says " Your iphone could not be activated because the activation server is temporarily unavailable". It went on like this for several days already. She was trying to upgrade her IOS to IOS6. Help anyone?
yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries -
i bought an iphone 3g but not in a shop and when i turn it on it tells me your iphone could not be activated because the activation server is unavailable what can i do to just have it working legit ?? , please anyone that could help me out
Generally, that means the phone has been jailbroken (hacked). You can try restoring it as new using iTunes. Beyond that, there's really nothing we can advise as jailbroken phones can't be supported on these forums.
See also Lawrence's post in this thread:
https://discussions.apple.com/thread/5186252?tstart=0
Best of luck. -
after downloading i-clouds I keep receiving a no service message and phone could not be activated because the activation server is temporarily unavailable.
I have read several questions on this but dont see a solution.Activation requires a SIM, assuming the SIM is functional it should simply activate.
The vast majority of activation issues are the result of devices that have been hacked or jailbroken. If that is the case, no support can be provided here. -
how to configure my 3gs iphone? it says your iphone could not be activated because the activation server is temporarily unavailable......
i live in iran. this 3gs was a gift from america .. it contains NOTHING. i can do nothing with it. it cannot be updated cuz the version is low. i dunno what t do please help.Possible causes:
1. Your antivirus is blocking access to gs.apple.com.
2. Your phone is jailbroken.
3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
4. Apple's activation servers are down (very rare, and never for more than an hour or so).
5. The phone was reported stolen. If it was it can never be activated again.
For 1. try disabling your antivirus.
For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.
Maybe you are looking for
-
Connecting Samsung Internet TV wirelessly or hard...
Have tried to hardwire and wirelessly connect my samsung tv to my home hub 3.0. I have tried to use wps to connect, to set up with auto settings and to set up manually. I have chosen a 192.168.1.200 as my tv's ip address, subnet mask: 255.255.255.0,
-
Hello, Recently for no real reason that I can see, I started getting this error. Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7601.2.1.0.256.1 Locale ID:1033 Additional information about the problem: BCCode:1000007e BCP1:
-
ODC Commit a document on Spacific Location
hello all how can i determine which location or folder needs to commit document on content server
-
Hi, I'm trying to compile simple construction in ECC 60: types: begin of t_bbseg. include structure bbseg. types: end of t_bbseg. I have compilation error: "The type "SI_BBSEG" is unknown" Is anyone had something like this before? We are Net
-
Have lost use of Mackie Control Universal Pro with Mac OSX 10.5.5 and FCP 6
Hi there: I seem to have lost the ability to use my MCU Pro in both FCP and STP. The device works perfectly in Logic 8. Is there a known issue with the updated operating system of updated FCP? Can anyone help. Thanks