After downloading 7 to my i-pad 2 the keyboard has become very slow responding and typing takes forever why?

After downloading the new 7.0.2 to my i-pad2 the onscreen keyboard is responding very slow. I have to wait for several seconds for it to show up on the screen after touching any key.

Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

Similar Messages

After downloading OS X Mountain Lion, my mac has become very slow

After downloading OS X Mountain Lion, my mac has become very slow and takes a bit to shut down programmes. What can i do to bring it back up to the speed it was when i had OS X Lion

LouieAustin wrote:
After downloading OS X Mountain Lion, my mac has become very slow and takes a bit to shut down programmes. What can i do to bring it back up to the speed it was when i had OS X Lion
Though I wish it were true, it is unrealistic to put 200+ new features into OS X and expect Mountain Lion to run faster and more efficient than Lion on the same hardware. I moved up from Lion to Mountain Lion. Mine is slowing down, but not very slow, as you mentioned. Safari and Mail are simply swine on launch. Check the following:
Patience. If you are impatient and detail alters your mood, take your MBP to the Apple Genius bar.
CPU. If you have a supported, but older MBP, your CPU may be showing its age.
Memory. 4GB or 8GB in your MBP? Mountain Lion drinks more than Lion and if you run multiple large memory footprint applications, 4GB will be a performance bottleneck. My HD3000 graphics takes 512MB. Check the System Information report for your memory. Is it OK?
Compatibility. Sometimes, hardware peripherals and applications are not entirely compatible with a new OS release, and divert OS performance to system log entries. A symptom is a large (> 2GB) system log file at /var/log/system.log. I just discovered a bad USB hub this way. Unplug everything and evaluate your performance again. Zero [ # > /var/log/system.log] the log file if you have the permissions.
Permissions. Launch Disk Utility and verify/repair Disk Permissions on your Mountain Lion disk. While there, might as well Verify Disk too.
Preferences. Sometimes, older preferences do not play well with upgraded application compatibility for a new OS release. It might be worthwhile to delete the specific preference and its lock file from Lion.
Caches. As routine, just before I shutdown the system, I will move the contents of /Users/name/Library/Caches to the Trash. I tolerate Adobe Flash and use their preferences panel to delete all Flash content. Then on reboot, I delete the Trash. Application performance improves as a result.
File Directory. Everytime that I upgrade OS X and run the retail Disk Warrior 4.4, it reports 25% storage fragmentation. Repairing and rebuilding the File Directory always restores noticeable I/O performance.
Storage. If within your budget, upgrade to an SSD. Otherworld Computing has MBP SSD solutions.
Applications. Some non-Apple applications may need recompilation for Mountain Lion, or behavior may be questionable. I compile my own MacVim editor from github sources. The same 64-bit binary that was compiled with XCode 4.3 on Lion, misbehaved on Mountain Lion. Rebuilt it with XCode 4.4 and worked fine.

My iphone has become very slow after I downloaded ios7. It has enough space, what can I do to fix it?

My iphone has become very slow after I downloaded ios7. It has enough space, what can I do to fix it?

Try this
Go to Settings>iCloud>Documents and data and turn it OFF

Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

How I download a MP4 series of videolectures (that the seller has stored in Amazon S3 and has sent to my iPad email address--which is different from the one I use from the MacBookPro) from my iPad to my MacBookPro-.

How I download a MP4 series of videolectures (that the seller has stored in Amazon S3 and has sent to my iPad email address--which is different from the one I use from the MacBookPro) from my iPad to my MacBookPro (so that I can the save them in iTunes and then synchronize some of the videolectures to the iPad?)

To set it up as POP you need to delete the account, reboot the phone by holding the HOME and SLEEP buttons at the same time until an Apple logo appears (about 10 seconds), then add it back following these instructions: Forcing creation of a POP or IMAP email account
I understand that you have used the same account for many years, but the technology is also changing constantly. Years ago the standard was POP (Post Office Protocol), which was designed at a time when it was inconceivable that anyone would access their email from more than one device. When people started using multiple devices, for the most part they wanted to see changes on one device mirrored on another. A new standard, IMAP (Internet Mail Access Protocol) was developed. With iMAP the master copy of all messages resides on a server, and multiple devices are kept in sync with the server. So if you delete a message from one device it is removed from the server, and then removed from all other devices when they next sync. This is the same way Microsoft Exchange works. Other benefits of IMAP include the ability to have multiple mail folders that are kept in sync across devices. In your case you could use this to create a separate folder for each family member, so they could move messages to their own folder and not clutter up the shared Inbox. Most computer mail readers can even automatically sort incoming mail into folders based on the contents of the message.
IMAP is considered a "higher level" standard than POP. When you create a mail account iOS devices query the server and ask what it supports; if it says it supports IMAP then the account is automatically configured for IMAP. So if you really want POP you must fool it, as described in the link above. In my experience Android devices default to the highest level protocol also, and I suspect newer Blackberries do (although it has been 15 years since I used a BB).

My mac has become very slow and crashes frequently after installing Lion

My mac has become very slow and crashes frequently after installing Lion. I have a 4 GB DDR3 ram and 2.4 GHz Processor. The Mac was running just fine on Snow Leopard. Has anyone else faced this issue?
Any suggestions on how to solve it?
Thank you
Kimberly M. Noronha

I refer you to the TM expert
http://web.me.com/pondini/Time_Machine/14.html
As a extra precaution I would copy the user file folders of Music, Documents, Pictures etc to another external drive and disconnect, just in case.
Always maintain TWO backups of your data at all times, since your messing with one, you need another until your back at two again.

Hi , after the update my macbook has become very slow , is anyone else also facing the same issue????

After update my macbook takes lot of time to start and shut down , its kind of annoying and suddenly it also changed the system date n time .

Try:
Mac Mini (Core i5)is very slow, not very responsive.
BTW, this is the Mac Pro desktop forum

Mail has become very slow after installing OSX

HI EVerything was working great till I installed Maverick. Mail takes forever. My gmail is all jumbled up. Once I click on a mail box it takes 2 mins to appear on the right hand side bar.
Crazy what do I do?

Hi there,
Have you installed the mail update? To check go to App Store and go to the updates section.
I hope this helps:)

My mac has become very slow after latest update of yosemite

i have installed the latest update for yosemite and my mac is extremely slow. Its i5 2013 model. help please?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

My Macbook pro (early 2011)become very slow after maverick install

Hi,
My Macbook Pro (early 2011) has become very slow after installing Maverick.
System is struggling to open any web pages, apps etc.. Even booting time is more than 5 mins. My macbook has 8 GB Ram and 750GM memory and also got 200GB of free space memory..
Could you please advice me on this. Thanks

etresoft a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
http://www.etresoft.com/etrecheck
Download, run and post the results back here.
Pete

How to recreate account.plist after the file has become corrupt

I updated my system to Mavericks last week and ever since my computer has become dramtically slow. Especially Mail takes about 30 minutes to open. I have discovered that the fault is caused by my account.plist file as it is 24 MB which seems way to big. I have already deleted the file and then Mail opens well and fuctions normal.
However when I add my accounts again it creates new POP folders in the V2 folder instead of using the old existing ones and it starts downloading the emails that still remain on the server. I would like to keep keep all emails etc just the way they are already on the system but basically just recreate a fresh "account.plist" file. How can I do this without the issue that mail creates new folders but just uses the existing folders???
I also already tried the following:
- delete "account.plist"
- Add new account in Mail
- New folder is created in the V2 folder for that email address
- Copy the old mbox files for that account into the automatically new created folder
The above seems to work but mail still starts downloading 200+ plus emails from the server.......
Any help how I can edit my account.plist file and delete unnessesary items there?? It seems that there is a lot of text in the file regarding my hotmail account and I expect that this is causing it to be so large. I have no idea though how to read this file and what I can delete and what not.....
At this moment I am pretty stuck and any help is welcome here.

These fixes have helped others, depending on the situation. I don't see one addressing your particular problem but they won't hurt.
Have an up-to-date Time Machine or other backup before attempting any major software updates or rebuilds.
For more about backups:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
Make sure your software is up to date. Apple recently released a Mail update.
Apple > Software Update...
A general repair to fix odd behaviors in Mail is Mailbox > Rebuild.
Try booting in Safe Mode.
          Boot and when you hear the bong hold down the Shift key.
          It will boot slowly. Be patient.
          Login the the user account.
          Restart.
Another fix to try:
Shut down Mail.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Copy and paste the following
~/Library/Mail/V2/MailData/
Click Go.
Move all "Envelope" files to your desktop.
Restart Mail and let it convert/reindex your mailboxes.
If this worked, Trash the Envelope files file that are on your desktop,
if not shut down Mail and put them back.
Another fix:
Shut down Mail.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Copy and paste the following:
~/Library/Containers/com.apple.mail/Data/Library/Caches/com.apple.mail/Cache.db
Click Go.
Move the Cache.db file to the Trash.
Restart your Mac and try Mail.
You can try restoring mail from a Time Machine backup.
Hold down the Option key and in the Finder Go > Library
Enter Time Machine.
Select a date and time from when Mail was working.
Restore Mail.
Advice from another thread: https://discussions.apple.com/message/23657222#23657222
If mailboxes are missing:
Linc Davis
Re: downloaded Mavericks and cannot find mailboxes, any ideas
Nov 3, 2013 9:24 PM (in response to always need hlep)
Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

I only get 30 seconds of show after downloading from iTunes. how do i get the full episodes?

i only get 30 seconds of show after downloading from iTunes. how do i get the full episodes?

Are you sure to have the full length file in the library? If you start playing it, will it show the full runtime on the controls?

After Downloading itunes 8.2.1, I get the application could be opened error

Guys,
After downloading itunes 8.2.1 I get the following message when I try and open open itunes...
"The itunes application could not be opened. An unknown error occurred (13008)"
I WOULD SUGGEST NOT TO DOWNLOAD THIS UPDATE UNTIL APPLE HAVE FIXED IT!!!!
Dave

Following the process outlined in http://support.apple.com/kb/HT1451 I was able to open itunes 8.2.1..

HT1725 42404 error after downloading itunes (20+ times!) can access the itunes store but can't do any downloads... itunes support has not offered any valid suggestions

42404 error after downloading itunes (20+ times!) can access the itunes store but can't do any downloads... itunes support has not offered any valid suggestions

This is EXACTLY what happened to me and many others. Tech support returned most of my money but not all of it. Figure that one out! It is clear no music is downloaded (or in queue), it is clear an unknown error message is produced, and it is clear we, the consumer, are still being charged anyway. Will Apple require a credit card from its customers and alienate those that do not wish to use a credit card? Will Apple insult its customers and make silly suggestions such as 'Use an iTunes gift card' in much the same way a forum moderator has already recommended?
I have an idea: Acknowledge the problem publicly (via email, for example) and fix it in a future update. Customers will be more understanding if they know there is a temporary problem and Apple is working hard to fix it. Oh, and return our money, please!
Windows XP Pro
Windows XP Pro

After downloading a movie from itunes i get the message MPAV Controller Error Domaine error 3 what can i do ?

after downloading a movie from itunes i get the message MPAV Controller Error Domaine error 3 what can i do ?

Log out of iTunes from Settings, power down and restart the iPad, log back into iTunes. Your download should play now.

After downloading 7 to my i-pad 2 the keyboard has become very slow responding and typing takes forever why?

Similar Messages

Maybe you are looking for