After downloading and creating the MSI for Lightroom, the install fails with no errors reported. Checking compatability, windows comes back with not compatible on both win 7 and 8.1.
Installer MSI fails with no error or message of any kind. Tested compatability with the windows compatability check and it comes back as not compatible. What now?
Hans,
It is a known problem on Windows 98, Windows and Windows 2000 if you are using Intel Pentium 4 processor with Sun JRE and Symantec JIT. I had the same problem with Windows 98. Oracle has a patch. Please see Note:131299.1 on metalink for details.
Similar Messages
-
Help please! I downloaded mavericks but the install failed. The message stated there was an error with the disk which required repairing. Using disk utility repair disk is not available ( greyed out) and verify disk stops and says disc requires repairing. So the online support page suggests I erase the disc and reinstall then back up from time machine ( I have a recent backup). But when I try to erase the Macintosh HD I get the message volume erase failed with the error couldn't unmount disk.
I'd be very grateful for any help anyone can give me.
I have a macbook pro 17" mid 2009- running on snow leopard 10.6.8 ... I lost the snow leopard disk so I don't know what to do from there ... I tried restarting by clicking SHIFT (safe mode) after the chime comes up, but It doesnt seem to make any difference ... please help !!
thank you sooo much
many many thanks for your hep guys !!Whenever you install a new version of OS X being installed, the disk is checked just as if you were using Disk Utility checks the disk to see if the disk is damaged. And,, from what you report, your disk is damaged and needs to be replaced. This isn't a fault with Mavericks - your disk may have been failing for years.
It's a very good thing that you've a recent backup as you're going to need it. I would suggest that you evaluate what functionality that you need in a new disk and go shopping at OWC for a new drive - HGST (or any Hitachi), Seagate SSHDs or Toshiba drives are all good. Be sure that you buy an enclosure for the 'new' drive so that you can format it using Disk Utility before installing it into your machine - you can get one of those from OWC as well.
Good luck - call back with any questions...
Clinton -
need to figure out how to remove an unknown admin password on a mac.
used the install disc with not luck. tried some commands in single user mode, no luck.need to figure out how to remove an unknown admin password on a mac.
used the install disc with not luck. tried some commands in single user mode, no luck. -
SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
The install seems to need to go all night, and then I get the error message.
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?
I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it. -
After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?
Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library. -
After downloading and installing 3.6.11 latest Firefox version, cannot conect to the web. Found old 3.0 version, re-install, back on the internet. What was wrong?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r45
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
After downloading and installing software for AirPortExtreme, Skype will not open.
After downloading and installing new software for AirPort Extreme from the Appstore, Skype will not open.
Did you repair permissions and restarted your computer after the installation?
Skype has their own forums for Mac users. You should post there if the above does not work. -
After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
I create my apple Id but the email for verifying didnt send because of that It doesnt workout! and Icant create the new one with my email address! what can I do?
annray wrote:
I have changed my apple ID as I have a new email address. This was changed but when I go to the store to buy an app or my email it tells me I have the wrong password as it is still showing my old ID.
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
annray wrote:
How do I change this on my handset and ipad?
Settings > iTunes and App Store > Apple ID = Sign Out...
Then Sign In using the preferred Apple ID. -
After downloadeing and upgrading the IOS to IO7 the iphone was restarted and locked with an unknown passcode by itself !! What should I do??
Hello malsobhi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Best of luck,
Mario -
New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAMNew computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM -
I updated my ipad 2from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over again
iCloud: Restore or set up your iOS device from iCloud
Or from iTunes http://www.iphonefaq.org/archives/971992
Maybe you are looking for
-
How can I import data from history including time of visit to site?
When I open my "History" tab I can then select from the left hand column, for example "last seven days" and then select "copy" from the "Organize" tab. But when I paste into an Excel worksheet, the only information that shows up is the website. Is th
-
Catalog:setActiveSources( sources )
The API doc says: "Do not mix collections with folders". It also says: "This is the equivalent of selecting items on the leftmost panel in the Library module" I regularly select both collections and folders in the leftmost panel... Hmmm... I wonder
-
I want to ensure that a subst var is around at execution - so i do an "add", which produces an error if it already exists. The server log shows a second error, which says the variable does NOT exist - when it does.I have been ignoring the second erro
-
Need to update from OS X 10.4.11 to most current OS – confused!
I have a Mac Pro (2x2.66 Ghz Dual Intel Xeon, 2GB 667 MHz DDR2 FB-DIMM), running OSX 10.4.11 and want to update my operating system to the most current for my machine (the most up to date?). I have bought CS5 and can't run it on my current OS cos it
-
External Material Group (UNSPC)
We would like to use the External Material Group field on the Material Master to house our UNSPC Codes. We would then use the Material Group field to develop and In-house code that is more intuitive for our Buyer's to enter on Purchase Orders to bet