After downloading ff4 into applications folder, then dragged (logo copied) to bar at bottom, when I tried to open it, prompt comes up that Mac OS-X version doesn't support using it?
received email notification, ff4 now available, click here , clicked on button as directed, file downloaded, dbl clicked on icon, dragged new icon to applications folder, looked up "info" and saw "ff4" to which I then dragged a copy to my bottom bar.
tried to open ff4 logo at bottom bar and was informed that Mac OS X 10.4 version did not support ff4?
Luckily I saved older ff 3.6.16 @1998-2011
I have new version ff4 parked in my 'applications folder' but can't use it?
Ok, one of the rules in troubleshooting is to remove all peripherals and see if anything changes.
I had two 500 GB "My Book" drives (different releases) connected via FireWire, and one Seagate 1TB drive connected via USB 2.0. (I thought they might be taking a lot of power away from the main unit.)
So after shutting down the iMac, removing the external hard drives, and attempting a reboot from the DVD I was able to succeed! The verify and permission check went as expected - nothing unusual.
I then dug out my original 10.4 Tiger installation/boot/utility disks that came with my G5 iMac, and was able to boot them as well. With the Tiger install disk I was able to run the "Apple Hardware Test iMac Version 2.5.1", and it didn't test the DVD drive but did find something wrong with the Video memory! (It was apparent that something might be wrong here since the display wasn't clean but had a bunch of short verticle lines about 1/8" going up and down all over my display - it was bad enough that I could barely read the hardware test results.)
So, while I may still have a Power Supply issue (I should be able to boot from the DVD with my external HD's connected) I now also know I may need to have the video ram looked at.
Similar Messages
-
I made a keynote then saved it to a flash drive. When I tried to open the keynote on another computer using the flash drive t says, "keynote quit unexpectedly". I have tried multiple times but it never worked. Please help, thanks.
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
Computer is a desktop running Windows Vista. IE will not open either saying "there is a problem and shutting down". My laptop with Firefox 3.6 works fine.
See https://support.mozilla.com/en-US/kb/Firefox+cannot+load+websites+but+other+programs+can
-
Trying 2 download new version of Firefox and after being prompted 2 drag Firefox icon into Applications folder, get message that task can't b completed bc Firefox is in use, but only use am making of Firefox is 2 have it open 2 download new version
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
I recently downloaded iOS 6. After downloading, all my applications are crashing. Including Safari, App Store, etc. What to do ?
Sounds like a corrupted file in system software. Boot into Recovery Mode and run Disk Utility. Most likely it will find a problem and be able to correct it. Read about Recovery mode here:
OS X: About OS X Recovery - Apple Support
You may need to reinstall OS X as part of this. I hope you have a Time Machine backup?
Good luck! -
Special characters downloading file into application server
Dear Friends,
i have to download records into excel sheet through back ground job, while downloading records into applications server.
all records are downloading properly up to here fine but some special characters also downloading. i had downloaded same records in debugging mode from the same internal table here no special characters.
i found that the structure(standard ( /SCWM/S_LIME_ALL_MON )) which is being used in that some fields are defined as RAW data type this may be the problem.but i tried to convert them using some function modules no result getting dump only.
i am using data sets to download data into application server here gui_download will not work because it is back ground job.
can any one please help me in this. its urgent...
please please help me in this it has been pending since DEC-01-11.
extra characters like ( #v#M?LQia#####
#v#M?LQia#####
#v#)
my code
open DATASET LV_FLNAM for OUTPUT in LEGACY BINARY MODE .
IF sy-subrc EQ C_ZERO.
LOOP AT LT_TAB INTO WA_TAB.
transfer WA_TAB to LV_FLNAM.
ENDLOOP.
CLOSE DATASET LV_FLNAM.
ENDIF.
Edited by: sairam.kusuma on Dec 16, 2011 6:26 AM
Edited by: sairam.kusuma on Dec 16, 2011 6:38 AM
Edited by: sairam.kusuma on Dec 16, 2011 6:39 AMTYPES:BEGIN OF ty_stru,
LGTYP TYPE /SCWM/LGTYP,
LGPLA TYPE /SCWM/LGPLA,
MATNR TYPE /SCWM/DE_MATNR,
MAKTX TYPE /SCWM/DE_UI_MAKTX,
QUAN(13) TYPE C,"/SCWM/DE_UI_QUAN,
UNIT TYPE /SCWM/DE_BASE_UOM,
CAT TYPE /SCWM/DE_CAT,
CAT_TXT TYPE /SCWM/DE_CAT_TXT,
CHARG TYPE /SCWM/DE_CHARG,
OWNER TYPE /LIME/OWNER,
ENTITLED TYPE /SCWM/DE_ENTITLED,
UI_WDATT TYPE /SCWM/DE_UI_WDATT,
UI_WDATU TYPE /SCWM/DE_UI_WDATU,
SKZSI TYPE /SCWM/LQUA_SKZSI,
QUANA(13) TYPE C,"/SCWM/DE_UI_QUAN_PACKED,
ALTME TYPE /SCWM/DE_AUNIT,
ITMNO TYPE /SCDL/DL_ITEMNO,
WEIGHT(15) TYPE C,"/SCWM/DE_NWEIGHT,
UNIT_W TYPE /SCWM/DE_WGT_UOM,
VOLUM(15) TYPE C,"/SCWM/DE_NVOLUME,
UNIT_V TYPE /SCWM/DE_VOL_UOM,
CAPA(15) TYPE C,"/SCWM/DE_CAPAUSE,
SN_STOCK TYPE /SCWM/DE_SER_STOCK,
END OF ty_stru.
DATA: LV_LGNUM TYPE /SCWM/LGNUM VALUE 'R10',
LV_FLNAM TYPE rlgrap-filename VALUE '/tmp/RAMA.xls'.
CONSTANTS: C_ZERO TYPE I VALUE '0'.
DATA: LT_TAB TYPE STANDARD TABLE OF /SCWM/S_LIME_ALL_MON,
WA_TAB TYPE /SCWM/S_LIME_ALL_MON,
i_stru TYPE STANDARD TABLE OF ty_stru,"
wa_stru TYPE ty_stru.
REFRESH LT_TAB.
CLEAR: WA_TAB.
*this is modified function module from /SCWM/S_LIME_ALL_MON
CALL FUNCTION 'ZEWM_F_PHYSICAL_INVENTORY_STOC'
EXPORTING
IV_LGNUM = LV_LGNUM
IV_VARIANT =
IV_MODE = '1'
IT_DATA_PARENT =
IMPORTING
ET_DATA = LT_TAB
EV_RETURNCODE =
EV_VARIANT =
CHANGING
CT_TAB_RANGE =
i have to download what are the fields defined as structure.
1)when ever i am using the internal table(LT_TAB) to download getting specials characters(####) with all records for the fields QUAN, QUANA, WEGHT,VOLUM and CAPA.
open DATASET LV_FLNAM for OUTPUT in LEGACY BINARY MODE .
IF sy-subrc EQ C_ZERO.
CLEAR: WA_stru,
wa_tab.
LOOP AT LT_TAB INTO WA_TAB.
transfer WA_TAB to LV_FLNAM.
CLEAR: WA_TAB.
ENDLOOP.
CLOSE DATASET LV_FLNAM.
ENDIF.
2)if i take another internal table with converting them as char file is downloading with out special characters but it is downloading single line only but not the hole data.
if i have the below code getting only single line records not total records without special characters.
open DATASET LV_FLNAM for OUTPUT in LEGACY BINARY MODE .
IF sy-subrc EQ C_ZERO.
CLEAR: WA_stru,
wa_tab.
LOOP AT LT_TAB INTO WA_TAB.
wa_stru-LGTYP = wa_tab-LGTYP.
wa_stru-LGPLA = wa_tab-LGPLA.
wa_stru-MATNR = wa_tab-MATNR.
wa_stru-MAKTX = wa_tab-MAKTX.
wa_stru-QUAN = wa_tab-QUAN.
wa_stru-UNIT = wa_tab-UNIT.
wa_stru-CAT = wa_tab-CAT.
wa_stru-CAT_TXT = wa_tab-CAT_TXT.
wa_stru-CHARG = wa_tab-CHARG.
wa_stru-OWNER = wa_tab-OWNER.
wa_stru-ENTITLED = wa_tab-ENTITLED.
wa_stru-UI_WDATT = wa_tab-UI_WDATT.
wa_stru-UI_WDATU = wa_tab-UI_WDATU.
wa_stru-SKZSI = wa_tab-SKZSI.
wa_stru-QUANA = wa_tab-QUANA.
wa_stru-ALTME = wa_tab-ALTME.
wa_stru-ITMNO = wa_tab-ITMNO.
wa_stru-WEIGHT = wa_tab-WEIGHT.
wa_stru-UNIT_W = wa_tab-UNIT_W.
wa_stru-VOLUM = wa_tab-VOLUM.
wa_stru-UNIT_V = wa_tab-UNIT_V.
wa_stru-CAPA = wa_tab-CAPA.
wa_stru-SN_STOCK = wa_tab-SN_STOCK.
transfer WA_stru to LV_FLNAM.
CLEAR: WA_stru.
ENDLOOP.
CLOSE DATASET LV_FLNAM.
ENDIF. -
after downloading photoshop, a zip folder with a lot of icons appeared, what t do next??
the zip folder lists download instructions in different languages. it doesn't have the option of setup.exe.
after I finished downloading, the zip folder appeared along with a white box. Whenever I click on the white box it reads as an extractor, which I go thru too, yet the software icon does not appear.
I purched Adobe Photoshop & In Design. My computer is a Dell with Windows8.
Please advise.
Maram -
I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?
Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah -
This morning when I tried to open my CC2014 Photoshop, it started to open, then quit suddenly. Same with Dreamweaver and InDesign. I am a professional and do not have the time to screw around with this. When I tried to run CC app, I get an error that says "Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud from 'http://www.adobe.com/go/adobecreativecloudapp'." I did so and tried to run the app and got the same error. I tried the cleaner and it removed all of my apps, then I tried to install again, and got the same error. I am getting desperate now, I have clients waiting for their projects. I need help, please.
Allisonf55952352 have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to resolve the current error? If not do you have any questions regarding the steps listed with the document?
-
I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported. What does this mean, and how do I get back all my photos and fix this? thanks.
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know some details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
where is you library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
I recently downloaded iOS 6 and since then, my shortcuts for messaging no longer work, I've tried resetting it, and deleting and re-entering them.
Use the yahoo app if available?
-
I have been using Aperture 3.3.2 with Mac OS-X 10.7.5. This version doesn't support RAW with Nikon D7100, so I decided to upgrade to 3.4. On downloading, it tells me that in order to upgrade, I need Aperture Version 3, which is what I have. What is one supposed to do??
Have you moved or renamed your Aperture 3 version? If it is not installed in the "Applications" folder or not named simply "Aperture", then Software Update will not recognize it.
Put Aperture back and "Software Update" should find your version.
Regards
Léonie -
I was prompted to downloaded a security update & so I did. when i tried to open firefox afterwards ,I couldn’t open it. My computer told me I had a DEP settings problem.I tried to change my computer's DEP settings but was notified i couldn't for firefox. I tried the uninstall & then install Firefox again route (could not even do it in safe mode since i can't even open firefox)but still had the same problem afterwards. What should I do?
Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I bought garage band from the app store and downloaded it to my mac mini. When i try to open a screen comes up explaining i need to down load missing files. I do this but when try to open GB again the same thing keeps happening! Can anyone help.
Thanks
Hugh LockwoodHi, Hugo,
In similar cases it helped to remove the GarageBand "Preferences" file from the User Library.
Open the folder
your home folder > Library > Preferences
and move the file "com.apple.garageband.plist" to the Desktop.
Then try again to launch GarageBand.
Regards
Léonie -
After getting error message 7, I un-installed all apple sw and installed iTunes, but it would not open. Received the message that iTunes Library cannot be read as it was created by a newer version of iTunes. What do I do now?
Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!!
Maybe you are looking for
-
Unable to delete old iCloud account
Anyone figured out how to delete an old icloud account?? No issues on my 5s but I can't get rid of it on my 4 which I want to sell. It's an email account that was hacked long ago.......I don't remeber the password and the email account deleted as s
-
Two remotes / two computers - chaos!
I have just bought a MacBook that comes with a remote. I like to sit in front of tv on sofa surfing when there is nothing on. The 42"LCD tv is connected to my intel mac mini that I use as a media centre for wahtching tv and dvds on. The problem is th
-
HotNews correction for Y2010 spool request error available
Dear gurus, I became aware of [SAP Note 1422843|https://service.sap.com/sap/support/notes/1422843] which has affected all my systems's spool request reorg jobs. It is currently release and patch level independent, so you will all be affected by it as
-
Objects for data tarnsfer in HR
Hi, Please let me know the objects that are migrated in HR. (For ex: IN SD the objects that are migrated are customers(Kna1,knb1,knvv), sales orders(Vbak,vbap,vebp) , condition records) Like that please let me know the objects that are migrated in HR
-
HT201401 Video button not working
When I open the camera on my iphone4s it will not allow me to select video. Help!!