After downloading iOS 6 ipod is flashing apple and itunes does not recognize

I tried to download the new iOS 6 for my ipod and now the screen is just white when I tried to reboot it, now it flashes the apple and white screen and itunes does not recognize it.  help?? it is only 8 mos old

- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store.

Similar Messages

  • Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it?

    Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!

    - See if placing the iPod in Recovery mode will allow a restore.
    - If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
    - Then time for an appointment at the Genius Bar of an Apples store.

  • I have an ipod touch  and Itunes does not recognize device.  What can I do?

    I have an ipod touch  and Itunes does not recognize device.  What can I do?

    See:
    iOS: Device not recognized in iTunes for Windows

  • Ipod was corrupted i restored it now windows and itunes does not recognize

    one day i plugged my 80g classic in to charge and sync. itunes diagnosed my ipod as corrupted and said please click restore,so i did now my windows computer and itunes does not recognize it at all i have a new 1g shuffle and it works fine. wat do i do with the classic cause i miss the space and it still turns on and everything. Help!!!! Please

    Start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Also this recent interesting post by a user here for a work around when an iPod is in the "recovery mode" looping state...
    http://discussions.apple.com/thread.jspa?threadID=1679535&tstart=0
    Cheers,
    Patrick

  • Windows and iTunes does not recognize

    yada, yada...
    I tried the Rs, but my new computer and iTunes does not recognize my shuffle. Can someone give me basic steps to correct this? Shuffle was previously 'synched' with another iTunes library and I don't want to erase my currently uploaded music. Help please!

    I don't know if this is the same problem, but I cannot get my I-pod Nano to sync or have I-tunes recognize it. It is a connector problem, and this is my second Nano to do it within nine months. Apple wants $32 to send it in to be repaired once again. I am irritated beyond belief. I took my Nano in to an IMAC store and they confirmed that it was a connector problem. They could not send it off nor repair or replace it though. So I've had two Nano's since Christmas have this problem.
    I would suggest that you try another device (shuffle) on your computer to ensure that it's not your computer (our other I-pods worked on the computer) and/or take it in to an IMAC store where they will see if it connects to one of their computers.
    Right now I think Apple products are basically crap...

  • My iphone is stuck in emergency call mode and itunes does not recognize my phone

    my iphone is stuck in emergency call mode and itunes does not recognize my phone

    NVM... broke down and called Apple Care.  Pressed on/off button and held it for a few minutes before pressing home button.  In recovery mode, but at least it is doing something now!

  • Brand new Ipod touch bought yesterday - Screen is frozen with an itunes emblem and cable. Unable to refresh or restore ipod. Computer and itunes does not recognize ipod.

    This is first Ipod for me  - I have had less than one day. Screen is frozen with itunes emblem and cable. Unable to refresh/restore or do anything with ipod. I turn off/on and get the same frozen screen. My computer does not recognize ipod. Itunes does not recognize ipod so I cannot restore.... Should I take this ipod back and get a new one? Is this normal?

    Before you can use the iPod you have to activate it by connecting it to a computer with iTunes.  Try the following to get your computer to see the iPod so you can activate the iPod.
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • 5g wont boot past logo and itunes does not recognize

    i have tried all the holding down of the buttons that are out there with no results.  Windows and itunes will not recognize and touch will not go into connect to itunes screen.

    Try the remaining actions of:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I dropped my iphone, it cracked (it alredy had some cracks in it) and the screen is black but sometimes has a background light.. When i plug it in to charge or to the computer it vibrates every 10 seconds and itunes does not recognize it. What can I do?

    I dropped my iphone 4 pretty hard, it cracked (although it already had a few cracks in it) and now the screen is black but sometimes has a background light turn on and then off. Holding the home button and off button at the same time do not work. When I plug it in to charge or to the computer it vibrates every 10 seconds and itunes does not seem to recognize it. It gets really really hot when plugged in (which I don't think is normal).  icloud does not recognize it under "find my iphone" either. What could the problem be? I am wondering if dropping it dislodged something inside. if so, what did I dislodge and is it possible to fix this myself?
    Thanks

    Sounds like that drop was a critical one, my friend. I would make an appointment at your nearest Apple Retail Store, because you're going to need a replacement. Also as a side note: the reason that the charger is making the phone vibrate over and over is because there is a disconnect somewhere in the charge port of the phone, causing it to plug in and out over and over.

  • My iphone 5 is frozen on the screen that shows a cable and itunes symbol.  I can not get the phone to enter DFU mode and itunes does not recognize the phone when plugged in to itunes.  The phone was mid update when it was disrupted....

    I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected.  Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes.  I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success.  ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes..  Please help!

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • My iphone 4s is stuck on recovery mode and itunes does not recognize it at all.

    Hi. Last night I left it updating 5.1.1 from 5.1 when I was going to bed. And at night I heard usb noise and woke up. iTunes had an error, I did not remember what is written there because I was sleepy. I think it was like 1612 error but I'm not sure.  There were an itunes logo and an usb wire on the phones screen. And I cant get rid of it. iTunes does not recognize the phone in "DFU mode" too. I need the phone today and I dont know what to do. Please help me. Sorry if my english is bad.
    itunes: last version
    os: windows 7 64 bit

    http://greggjturner.com/download.html
    This program got me out from the loop. I dont know sharing it here is legal or not. But it is the solution for this problem. However I'm still wondering why I faced a problem like that. Is an update is that hard?

  • I keep getting the same message ...trying to put my credit info and iTunes does not recognize my info

    I have an iPad, trying to put my credit info in.....it says iTunes does not recognize my info.

    Accepted form of payment
    http://support.apple.com/kb/HT5552

  • HT201413 HELP! My Ipod touch is locked in the restore mode, and ITunes does not recognize it! what do i do? was just trying to update to latest version:(

    i plugged in my ipod touch last night to update to latest version and there was some sort of problem and it said i needed to restore so i did. And now it just keeps saying it can not find my ipod. it used to say "crystal's Ipod" now it says "ipod" on the left. HELP!

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • My ipod 3rd generation nano will not power up and itunes does not recognize it, what can I do?

    My 3rd generation will not power up. I've tried to reset it by holding the menu and select buttons at the same time but nothing happens. My itunes will not recognize it either when i connect it to the usb port. Does anyone have any suggestions? Thanks.

    See:
    iOS: Device not recognized in iTunes for Windows

  • Ipod frozen and itunes does not recognize

    I have the most current version of the ipod touch and it is stuck on a screen saying it should connect to itunes. My device does not come up when I connect to itunes and I have tried resetting it, but it doesn't even reset it just pops back up to the same screen in about 2 seconds. Even when I try to turn it off the slide to turn off screen never comes up. This happened when I was updating the ipod through the computer and it said an error had occured and the update did not work. I have tried all the things I could find like attempting to put it in dfu mode, but since it doesn't come up in itunes that doesn't work. Does anybody have any other ideas or advice for me?

    Do you remember what the error message said?
    Otherwise
    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • After Insert Trigger Not Working

    Hi All, I am not a guru in writing triggers. I am inserting new records in a Table FA_BOOKS by application and this inserts records in FA_ADDITIONS_B. This is a vanilla process. i have written a trigger on FA_ADDITIONS_B, and i want to update the cos

  • How to enable https or SSL for login page only?

    Hi, My application is runnnin in iPlanet web server 4.1 version. how to make my login page only secured (SSL)? previously we have done https enable for the whole application. but client specifically wants for login page only, not for the whole applic

  • CS3 DWT template link problem

    Code: <td rowspan="4"><a href="about.htm" title="About the Album" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('buy the album','','images/davis_album_buy_btn_f2.jpg',1)"><img src="images/davis_album_buy_btn.jpg" alt="About the Album" ti

  • Finding the manufacture date on an access point via software

    I'd like to determine the manufacture date of our access points because we plan on converting to LWAPP? Can someone tell me the what CLI command to use and which field has the answer. thanks.

  • Downgraded Pavilion Slimeline 400 Windows 7 Professional, Can not find drivers.

    System is a Hp Pavilion Slimeline 400-224 Desktop  Operating system is Windows 7 Professional (64-bit)  Drivers not installed after install Network Adaptor Network Controller  SM Bus Controller  USB Controleler Update as I am typing this post.    Net