After downloading iOS 7 I can't use my AppStore as another language than english appears...

After downloading iOS 7 I can't use my AppStore as another language than english appears... I am getting frustred!

I don't know if this helps, but I experienced a similar issue with my iPad 2 after updating to iOS 7.
My "solution" to the problem, after pulling out my hair for hours, is to plug it in the wall charger, and then shut the iPad down completely. It does charge when turned off, although a bit slower than usual, or so it seems. Pheeew...:-) I realize that this is a pain if you have a problem with an iPhone, because you have to turn it off to charge it. Presuming that this works, of course. Otherwise, I don't know..
After the update, the iPad simply does not respond when i plug in the charger, nor does it connect to the USB port. The battery just keeps wearing down. I think it could be connected to the firmware change that iOS 7 brings, which I guess in itself has to do with Apple wanting to block out 3rd party manufacturers of power adapters of the new "lightning" type.
The only thing I can think of that might have gone wrong on my part concerning the update is that I didn't have it plugged in while installing the update - although I believe this is recommended from Apple. I'm thinking that in my case the new firmware update simply hasn't registered any adapter present upon installation, and that might have caused the iPad to not recognize an adapter at all, regardless of type. I have always used original Apple adapters, btw, so I'm not really guilty of anything other than not plugging it in while updating - or, at least that's my own theory. Which is better than no theory at all.. ;-)
Obviously, I'm waiting eagerly for Apple to solve this issue. Not really happy at all with this..

Similar Messages

  • I want to buy a MBP with  retina display, can I get the keyboard in another language than the ones listed?

    I would like to buy my new mac in the states, but want the keyboard to be in another language than the ones listed (english, french, spanish and japanese). Is this possible if I contact them?
    Btw, I know that you can change the language in settings, but I want the physical other keyboard, not to just change it on the mac!

    EmilyVictoria wrote:
    hopefully they can do the same at the apple store Thank you!
    I think they can from a physical retail store, but you should ask them directly.  Normally the kinds of keyboards available via special order should be those shown at the site below, but I have heard that some probably are only available outside the US.
    http://support.apple.com/kb/HT2841

  • After download ios7, i can't use my messages in my ipod touch 5. what can i do?

    I had iphone 4S and ipod touch5. After update ios7 in ipod touch5, i can't used the same email address in the ipod touch. However, it had ask my apple id. when i put on my apple id in it. It become one email address in iphone and ipod touch. I want to seperate them so i can receive 2 different message in different friends what can i do?

    When you open Print & Scan and click plus to add and then select the Default Add Printer pane, does the MP530 appear in this view?
    If not, open Safari and then open the Preferences. Then select Bookmarks and for the Bookmarks Bar, select Enable Bonjour. This will make a Bonjour entry appear in the Safari Bookmarks Bar. Close the Preferences and select this Bonjour bookmark. Does the MP530 show in this view?
    If the MP530 is still not showing then turn it off and unplug the power cord for one minute. Then reconnect the power cord and turn the printer back on. Now use Safari > Bonjour to check if you can see the MP530.

  • Use an application in another language than your system language

    This topic is already spoken about some times here in the forum.
    Since SL the language triangle is missing when you CMD+I on a application.
    I am using the system in German, but I love to use FCP for example in English.
    I really wonder why Apple got rid of that cool feature?!?!?
    I found this:
    How-To Change a language for an application in Snow Leopard
    "defaults write com.apple.iChat AppleLanguages "(German)"
    and you can reset it by
    defaults delete com.apple.iChat AppleLanguages"
    but its not working always...
    Looking into the package of FCP and
    swap the folder names under RESOURCES of the English.lproj and the German.lproj is resulting also in some strange mixtures English and German language messages.
    I guess in Leopard the language selection in the information CMD+I dialog was only creating a pointer and tell the system to use the right folder in the package.
    There should be a failsave and easy way to set the language for an application.
    Funny, there is also a "Resources Disabled" folder which has the old language files that were used by Leopard. I am afraid I can only get rid of all that extra files if I install SL fresh again...
    I hope someone...means Apple sends out a fix for that problem...for me they can even advertise it as a new feature
    But give it back! I was more than useful!
    Has anyone found a good solution yet?
    Thanks

    yes, I know!
    But this is not permanent and a very bulky way to use differnt apps.
    In a daily workflow I can't start a software that let's me choose a language I want to run a software....no...takes too long! And I have to think...too much work

  • I can't use facetime or imessage after downloading ios 7.

    After downloading IOS 7 on my Ipod Touch 5, I could no longer use Imessage or facetime.  I go to my facetime app and it opens with asking for my apple ID et al and then comes up
    "FaceTime Activation
    Could not sign in.  Please check your
    network connection and try again."
    When I go to my imessage app the SAME thing occurs.
    There is NOTHING wrong with my internet connection.  Safari is going online no problem.  How can I fix this?

    Change your iPod DNS to 8.8.8.8
    That should work. Cheers

  • After downloading iOS 7 on my 4S I show 8,976 on my email icon.  How can I eliminate them all without going one at a time?

    After downloading iOS 7 on my 4S it shows 8,976 on the email icon.  How can I move them all to trash without doing it one at a time?

    Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • After downloading iOS 8.1.3, lost the use of messaging and face time, shortly after my e-mail. Any suggestions?   Valo

    After downloading iOS 8.1.3, I lost the use of messaging, face time and shortly there after my e-mail. I changed and reset everything I could on my I-Pad... same result. It can't be my router or my provider, for my I-Pod touch works fine. Any suggestions?    Thanks, Val

    Hello there berczy,
    As I understand it, you are not able to use iMessage, FaceTime or any email service on your phone. Saying you've tried everything would generally make me recommend that you restore the phone from a backup but that can take a long time, so without knowing exactly what steps you have taken, I would like for you to review the troubleshooting in the following article for FaceTime and iMessage:
    If you get an error when trying to activate iMessage or FaceTime
    And to troubleshoot the Mail app, use this article:
    Get help with Mail on iPhone, iPad, and iPod touch
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • After downloading iOS 8.1.3, lost the use of messaging and face time, shortly after my e-mail. Any suggestions?   Val

    After downloading iOS 8.1.3, I lost the use of messaging, face time and shortly there after my e-mail. I changed and reset everything I could on my I-Pad... same result. It can't be my router or my provider, for my I-Pod touch works fine. Any suggestions?    Thanks, Val

    Hi berczy,
    Thanks for the question. I understand that you are experiencing multiple issues with your iPad after updating. It sounds like you are on the right track, as all three of these tasks require an internet connection. To help isolate the issue further, are you able to open webpages in Safari? If not, we’ll need to troubleshoot the iPad’s network connection:
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    https://support.apple.com/en-us/HT204051
    - Matt M.

  • Can't send iMessage after downloading iOS 6

    I can't us iMessage over wifi network now after downloading iOS 6

    Yeah this is really strange...i can use Messages on my home wifi without issue after updating to iOS 6...but from my work wifi network my messages fail 90% of the time. What's most rediculus is that this has been going on for almost a week now & nobody at apple seems to even be acknowledge it's an issue????

  • After downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    after downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    Please tell me that it has NEVER been jailbroke.  If it has not been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • I been using my iphone from japan for a month now which my sister gave to me even theres no sim inserted in it, but after downloading ios 6.0.1 i cant activate it even i connect it to itunes, it says i have to insert a sim in it....is there a possible way

    i been using my iphone4 from japan for a month now which my sister gave to me even theres no sim inserted in it, but after downloading ios 6.0.1 i cant activate it even i connect it to itunes, it says i have to insert a sim in it....is there a possible way that i can activate it even theres no sim inserted in it?pls help....

    No. All GSM iPhones require a valid sim be in the phone in order to activate. Until you get a valid sim, all you'll be able to do is look at it & make emergency calls.

  • After downloading ios 7.0.2, my ipad will not charge completely.  What can I do to fix?

    After downloading ios 7.0.2, my ipad will not charge completely.  What can I do to fix?

    I've the same problem after installed iOS7.0.2, my ipad3 just couldn't charge to 100% when pluging on my desktop, so I have to use wall plug for full charge. I am sick of iOS 7 and wish I didn't upgrade it.

  • After downloading IOS 8.0.2 I can not connect to the internet, any solutions?

    After downloading IOS 8.0.2 I can not connect to the internet, any solutions?

    It is not the wording but the lack of detail.
    The iPhone connects to both the phone network (3G, LTE, etc) and to WiFi networks.  Which one (or both) are you having issues with?
    If it is the phone network, go to Settings->Cellular and see if Cellular data is turned on globally AND for the apps you wish to use.
    If it is a WiFi network, go to Settings->Wi-Fi and see if you are connected to a network.  If so, touch the circled "i" next to the network name and see that you have a valid IP address, etc. (take a screen shot and post it if you don't know what to look for).

  • After download IOS 8.0.2 my iPad went to recovery mode. how i can turn it on

    After download iOS 8.0.2 my iPad went on recovery mode, how do i come back to regular use ?

    Use iTunes on your computer to restore it.
    ~Lyssa

  • After downloading ios 6 to my ipad 3 , I can't see the pics of many of my purchased albums when I first open up the Music app. Why? And when I click on the actual album, it shows the pics.

    After downloading ios 6 to my ipad 3 , I can't see the pics of many of my purchased albums when I first open up the Music app. Why? And when I click on the actual album, it shows the pics.

    After a while it start to work.... No problems.

Maybe you are looking for

  • Some German alphabets are replaced by # while downloading data from UNIX

    Hi, I have a problem when I upload the data into UNIX application server directory, the data for example the data sent to server had some characters with german alphabets 'ä' '2 Jahre Erw. Gewährl.-Level HW-Rep.(11L) '. When I try to download the dat

  • Multiple currency translation in one single query execution.

    Hi folks. I have today running in production, a report like: The user input a period and a version (multiple single values selecion) - Period - Version (0VERSION) And the report returt as follow                               2010                   Ve

  • RFQ and PO Print

    Hi How to take print our for RFQ and PO. I know the t codes for both. Wat are all the back ground seetings required both? Explain in details Vijay

  • Purge dba_recyclebin

    All, My oracle version : 11.2.0.2 Can someone help me to fix this sql ? I'm doing mistake at converting date function and trying to make a count of dropped objects before purge older than 15 days. SQL> select count(*) from   dba_recyclebin where to_d

  • Premier Elements 12 auto-save location

    My daughter is working in Premier Elements 12 on a .mov file.  She did about 2 hours of movie editing and the program shut down unexpectedly.   The program was saving as she went, but she can not find her file.  Any ideas on where the program would p