After downloading service pack 1 for Windows 7 Firefox did not respond anymore (I got the startscreen, but could not do anything, it "hang"), after a roll back Firefox did work again: are Firefox and SP1 incompatible?

After implementing SP1 for Windows 7 Firefox "hang"(I got the startscreen, but could not do anything: no response). After a roll back removing SP1 Firefox works again.
I installed SP1 also some months ago and had the same problems, also then this was solved also by a roll back removing SP1.
Does Firefox have problems in combination with SP1? How to solve this? Thanks.

Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
Have again performed a roll back in order to remove SP1, now Firefox works again.
If somebody has advice it would be very welcome!

Similar Messages

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

HT1212 My Iphone 4 has been stuck on a loading symbol for a week now, I've plugged it into the computer but can't do anything still because it says I need to put my pass-code in, but I can't the screen is on loading still! Any ideas on how to fix this pro

My Iphone 4 has been stuck on a loading symbol for a week now, I've plugged it into the computer but can't do anything still because it says I need to put my pass-code in, but I can't the screen is on loading still! Any ideas on how to fix this problem?

On the new laptop, launch iTunes. From the menu bar click Store / Authorize This Computer.
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer

HT204407 Find my friends Icon disappeared after upgrade to ios 8. I tried restarting as well as reinstalled the app but its not working. I can find it in Usage, but not in spot light. Pla help!!j

Find my friends Icon disappeared after upgrade to ios 8. I tried restarting as well as reinstalled the app but its not working. I can find it in Usage, but not in spot light. Pla help!!

I have exactly the same problem on a 4S on iOS 8. Have tried uninstalling, deleting FMF from backup, resetting phone and restoring from backup, but the problem remains. Sometimes the icon appears on a backup Home screen in iTunes, but it never appears on the phone itself. The app is accessible by going to the store, purchases and opening it from there. The app appears to have been running the whole time, but becomes invisible anytime I return to the home screen.

Firefox not responding. Have done all troubleshooting but still not working. It won't even open now. Help please.

After going through all the troubleshooting suggestions and also uninstalling and re-installing Firefox, it still won't work. To begin with it was fading out and a 'not responding' notice appeared on the header, with the pointer turning to the timer but nothing was happening. It's been working well for ages and I haven't added anything or deleted anything recently, so can't understand why it should suddenly stop working.
I've followed all the troubleshooting advice and disabled the plug ins, also removed a lot of the add ons, still didn't work. Then I uninstalled it and re-installed it.
Now it won't even open. A window comes up saying it has crashed and giving me the option to re-start it or quit it. If I click re-start, it won't re-start.
I've even started it in safe mode but that won't stay open either, it opens for about a minute then just closes.
Please help, I really don't want to use any other search engine.

If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
*Click the "All Crash Reports" button on this page to open the <b>about:crashes</b> page and see all crash reports.
If necessary then you can open <b>about:</b> pages via the location/address bar.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox, see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
*https://developer.mozilla.org/How_to_get_a_stacktrace_for_a_bug_report

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

BB Torch - bluetooth tethering for laptop internet use: "Error 720: A connection to the remote computer could not be established

Trying to set up Blackberry Torch for laptop tethering...bluetooth. I have connection/drivers/etc. but keep getting error message: "Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection." Where and what do I chancge setting to so this will work?
I have synched my phone and laptop wirelessly across other internet connection....just cant get this above to work. Anybody know how to fix this? Thanks!

Hi,
Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
If system restore doesn’t help, please also try the following:
1. Check if you can establish the VPN via other connections except the connection through the UMTS card.
2. Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
Netcfg -u MS_L2TP
Netcfg -u MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
Then reboot the computer and see how it works.
Meanwhile, I would like to share the following with you for your reference:
Troubleshooting common VPN related errors
Hope this helps. Thanks.
Nicholas Li - MSFT

I can't download service packs for microsoft office home and student 2011

I'm having difficulty downloading any service updates for Microsoft office 2011. Please send suggestions

Microsoft Tech support should be able to tell you what ports you may need to open on your firewall to enable downloading. http://www.microsoft.com/mac/

Crystal Reports (VS-2005). Service Pack for Windows 2008 Server

I had issues with reduced font size on Export and Printing. On a PC with Windows XP SP2 installed, I made registry changes as recommended in this post:
[Font size decreases when exporting to PDF (Crystal Reports)|http://mdn.morovia.com/kb/Font-size-decreases-exporting-PDF-Crystal-Reports-10053.html]
Prior to making registry changes, I also installed Crystal Reports SP1 for VS-2005. After this, everything seems to be working fine.
But I still have this Reduced Font Size issue on my Server with Windows 2008 R2 Enterprise installed.
I installed the same Service Pack and made the registry changes, but the changes don't seem to appear. It is still showing Reduced Fonts on Export and Printing. My server is also running Visual Studio 2005.

I concur with Bhushan;
It may or may not work with windows server 2008 .
One idea;
Use [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx]. Look at the procmon logs and see if the registry key is being looked at \ accessed by the report engine.
Other than that, upgrade to a version of CR that supports the OS is your only option.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Download Service Pack for NetWeaver CE 7.2

Hi everybody,
i want to download and install SP5 for our CE 7.2 (Initial Shipment) on Win 2003 Server x64 with Oracle. In Service Market Place -> Support Packages and Patches i choose the needed Usage Types like:
- Application Server Java
- Adobe Document Service
- ESR
- BPM
In the next step i choose the following Components:
- SAP JVM 6.1 -> Windows Server on x64 64Bit
- SAP HOST Agent 7.0 -> Windows Server on x64 64Bit
- SAP Kernel 7.2 64-Bit -> Windows Server on x64 64Bit -> Oracle
- SAP IGS 7.2 -> Windows Server on x64 64Bit
After i choose next i get the Waring Message: Your settings concerning the required instantiations (e.g. operating systems, databases) are incomplete.
I get:
1 x Waring for not choosing the Memory Analyser
12 x Waring for not choosing SAP J2EE KERNEL 7.20 32-BIT UC und alternative SCV
But:
The Memory Analyse is for Windows IA32
And the Components SAP J2EE KERNEL 7.2 32-BIT are not for a x64 System
What is my mistake?
Best regards,
Sid

> we have a local installation for our developer unfortunately we don't use a SolMan. I had to download the files by my self.
I see - you may be able to put the files in the download basket but without SolMan you won't be able to confirm and hence download them (or you have to create an OSS call).
There may also be dependencies of Java patches and kernel patches or other components. Resolving them manually can be tedious.
Markus

HT1657 After downloading a film rental in itunes, a when pressing Play, following message comes up: We could not complete your Itunes Store Request, an unknown error -42110 has occured

After downloading a film rental in itunes, and when pressing Play following message comes up: We could not complete your Itunes Store request, -42110 an unknown error occured

Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

HT203175 My phone downloaded and installed the iOS 7, but it is telling me I can not activate it. That the activation center could not be reached. Please help!

My phone downloaded and installed the iOS 7, but is telling me my phone cannpt be activated. It says that the activation server can not be reached. Please help!

Hi again razmee209!
It has been updating since your last message and it says there's another 6 hours to go, does this sound right or is there a possibility I've been sent a re-con and the update will slow down my new handset considerably?!

Converted songs from Windows Media Player to itunes show up in the library but will not play

I just installed itunes for the purpose of converting my Windows Media Player library to itunes. I went through the install and added the music folder. itunes went through the conversion process overnight and all of my songs appear in the music library. However some songs will play properly and if you open them in windows explorer they are in a folder called my music/downloads and are mpeg files. Other songs that are listed in the music library and appear to have been converted will not play. When you click on these songs that won't play it appears to be playing in the progress bar on top, but no sound comes out and the EQ visualizer shows nothing. When you open these songs in Windows explorer they are located in a folder: my music\i tunes\itunes media\music and they are a .AAC audio file type. What went wromg in this conversion process? Why is itunes putting these files in two different locations? Why will these files not fully convert and play?

This is also what I suspected but why would the songs go through conversion, show up in the library, and then not play? Apple support even says "itunes for Windows cannot import or play WMA files that are protectd." Yet the imported song is sitting in the library and when you play it the song is listed and the diamond advances - but no sound.
Also, any tips on how to see if a WMA file is protected by DRM?
Thank you for your response.

Bridge NOT RESPONDING... re installed PS but still not responding... any Ideas??? (Windows, 64 bit)

adobe bridge is not responding. All other programs from Suite are fine. When I click on anything in the bridge it immediately says NOT RESPONDING> I re installed PS but it did not help...???

Hey glennboyes,
Thanks for the question. I understand you are experiencing issues with connecting to the iTunes Store. The following articles may help to resolve your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 3000" through "3999"
Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

Black screen and frozen will not respond have tried holding the buttons but nothing

MY 32GB IPOD Touch , the screen is black and frozen .I have tried pressing the buttons to reset but no responce any ideas please?

Have you tried the troubleshooting here:
iOS: Not responding or does not turn on

After downloading service pack 1 for Windows 7 Firefox did not respond anymore (I got the startscreen, but could not do anything, it "hang"), after a roll back Firefox did work again: are Firefox and SP1 incompatible?

Similar Messages

Maybe you are looking for