After downloading SP0, and entering the product key, get Evaluation message
I have bought CR2008, then downloaded SP0.
I entered the product key from my original CR2008 cd.
Now every time I start CR I get a message: Evaluation Copy: This will expire in 7937 days. etc.
Now 7937 days is 20 years, so I am not afraid of loosing the use of CR but it is rather annoying.
How can I turn this message off??
Install SP1 and then SP2
Similar Messages
-
I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don't see any thing else. Now not sure what else I have to do.
Thanks,
RanjitSee the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2 -
Trying to install a new version of SQL 2014 Std 64 or x86. Installing on Windows 8.1Pro 64bit machine.
I get:
"TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017."
I looked at the summary log and that is the only error.
I made sure there were no other instances of SQL on this machine. Uninstalled all VS2013 and sql instances just in case. IF there is somewhere to check if a previous version or license is causing the issue, i would be glad to check.
Any help would be appreciated.Hi,
Please read this thread with similar issue
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bdd94577-515c-49fa-be44-008eacece057/installing-sql-server-2012-on-a-new-vm-error-code-0x858c0017?forum=sqlsetupandupgrade
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !
See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2 -
I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss
how do I find the file and replace it or install it?I'll reload it tonight when I get home...basically, I bought a new iPhone and downloaded some new medical apps. also had to download an update for iTunes into my mac laptop so I could access iCloud (which was NOT on my prior iTunes software)
When I synched my new iPhone with the newly downloaded iTunes, I registered my iphone and tried to "back it up" to iCloud and the message indicating that "the required file was not found or has a permissions error...." popped up.
How do I correct the permissions error, or...am I able to do this somewhere? Or...how do I find the file that is missing?
Dr. Bob001 -
I have purchased Quicktime Pro and entered the registration code. It indicates at it has been installed, but it does not run. Any suggestions?
The trim to selection function is available and it appears to be working. For now, I seem to be operable as Pro even though the header doesn't say so. Thanks.
-
I lost my CD I have the Product ID. I needed to replace one of the company PC's and need to load Project 2007 on to the new PC. How do I do that? Was on the phone for hours and got no where with lousy speaking foreigners
John --
If Microsoft Support was not able to help you, I doubt there is much we can do for you in this user forum, given the fact that we are all volunteers and do not work for Microsoft. If you have an MSDN subscription, you should be able to download Microsoft
Project 2007, but I cannot guarantee your product key will work. The alternative is to bite the bullet and purchase the 2013 version of Microsoft Project. There is a LOT of new functionality that has been introduced since the 2007 version and I
think you could really benefit from those new features. Just a thought. Hope this helps.
Dale A. Howard [MVP] -
i have activation code. originally purchased via amazon as the disc version and i have this but no disc drive.
If you registered the license with Adobe, then you should be able to download the software from your "My Plans and Products" associated to you Adobe ID. Assuming you are logged in with your Adobe ID, try here:
https://www.adobe.com/account/account-orders.html
I currently see the serial numbers of all of my versions of Lightroom (and other Adobe products) and there are download links.
Detailed instructions here:
Find a download link on Adobe.com -
Site lost activation out of nowhere - How do I find and enter the activation key through VPN?
I had a message that site comms went down. My clients sent somebody on-site and all is working but the OnPlus agent still shows comms down. I VPN'd in and can get to the web page for the unit but it's asking me to activate it. Is there a way to find the activation key to enter into that field so that my settings, etc. are kept?
Also, has this happened to anybody else before and what could be the cause? Thanks!Hi Lokib,
Sounds like the On100 has been reset. Did someone inadvertently hold down "Reset" on the device?
The Activation key is located under "Profile>Profile".
I haven't seen this happen to anyone else myself. Could you PM me the site name and I'll see if we can dig up anything else in the logs.
Thanks,
The OnPlus Team -
I can see the restart button mentioned, but i cant get past the message that it cant be installed when it has booted up with the 10.6.4 server installation disc.
So far:
Copied installation cd to a hard drive and booted from it.
Created new raid set (RAID 5)
Zeroed out information on disks
10.5 server had no trouble installing
10.6 sl had no trouble installing
I used to have 10.6 server installed on the intended mac pro.
However i need to reinstall and it is not possible.
Any help would be very much appreciatedWhere did you get the 10.6.4 install disk? Did it come with some other machine?
I ask because it sounds like that's the case - and it may only work with the machine (or, at least, model) it was shipped with.
However, if you have another 10.6 Server install disk, even an older version, just go with that and run Software Update after it's installed. The chances are you don't really want 10.6.4 anyway, right, but something later. -
Okay, So I purchased Lightromm a few months ago and down;oaded it on my Mac. I now have a new Mac Pro and I can't seem to be able use the key code from the previous purchase.
Any suggestions?It should work. Make sure you are installing the same version. If you continue to have a problem try contacting Adobe Support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Why is my Cisco ER admin page is blank after I place and enter the username and password?
when i enter my username and password in the CER admin login screen my page is blank. Can anyone tell me why? BTW I restarted Cisco Tomcat and my Cisco Emergency Responder will not start.
Version: 10.0.2.10000-11
Yes i did.
the platform page works just fine. It is just when i login with the admin page does not load.I mean it is just a blank white screen.
it should still appear without certificates. I have attached a screen shot -
Hi I just bought an Apple TV device i have detected the 2WIRE and entered the Product Key Password. It takes that okay the screen goes to Connecting followed by Activating below in small print it says Setting date and time but nevr leaves that screen it just clocks there for evr???
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
I purchased downloaded and installed microsoft office 2011 onto my iMac. At no time was I prompted to enter the product key so I am unable to activate the software. Can anyone tell me what to do in order to activate the software?
Welcome to Apple Support Communities
Where did you download Office for Mac? If you downloaded it from Microsoft, read > http://support.microsoft.com/kb/2391941/en-us -
I have downloaded firefox and followed the directions to get it running, i.e.
1. drop the icon into the applications folder.
2. click on the icon to access firefox.
Nothing happens. Browser doesn't open up.
The icon I get after the download is much larger than the typical icon on a Mac.I tried your suggestion of pressing the shift key while launching Firefox. What happened is, this action highlighted in blue several icons on my desktop including Windows Internet Explorer.It then preceded to open Windows Internet Explorer. It was worth a try. I tried the control key while trying to launch FireFox and that did not do anything.
Maybe you are looking for
-
Which objects to save in backup for a double stack system.
Hi Gurus, We have a double stack solution manager system. We had a full system save, option 21 after installation. For the regular backup we are saving the following : the IFS, R3<SID>DATA ,SAP<SID>DB libraries, and the journal libraries R3<SID>JRN
-
Hi, Risk analysis give risk status result in balls like red in critical, light red in high,orange in medium.we want,it should say critical,high,medium and low intead of balls and simulate also give same result as risk analysis.we also don't want if c
-
Hi, Here is the standard MPLS network with vrf INTERNET: PE2--P2--P1--PE1--INTERNET | CPE PE1-routes ip route vrf INTERNET 0.0.0.0 0.0.0.0 --> PE1 IP route vrf INTERNET 0.0.0.0 0.0.0.0 -- > INTERNET vrf INTERNET 10.10.0.0/16 connected 192.168.0.5 is
-
.PSD File incompatible with Photoshop CS5 after working on it in CS5 for hours
Hi. Sorry If I've posted in the wrong area, but I'm a little flustered and I have not a clue of where to put this. Couldn't find anything related to troubleshooting. I was working on an Illustration in Photoshop CS5 yesterday; it was a trial version.
-
Hello, Is there anyway to make the current tab clickable so that it navigates to the primary tab page? Regards.