After downloading the latest Itunes software, I can't connect any device to Itunes!
After downloading the latest Itunes software, I can't connect any device to Itunes. I am using windows 7!
i am using windows 8 and still can't find my iphone on itunes
Similar Messages
-
My iPad will no longer connect to my wireless sony speaker after installing IOS 7.0.4. I have reset the speaker and reinstalled through NS Setup but still no joy. Any advice would be most welcome. Thanks.
Hi,
When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
You may try the steps below as of now and check the results.
We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
Once it is docked try the steps below:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Open the above link; and then perform the Factory Reset as shown in Solution Two.
Once completed try connecting to Wireless and check the results.
though I am an HP employee, I am speaking for myself and not for HP. -
I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?
iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
After downloading the latest itunes,I seem to have lost the page with the grey bar on the left, so can no loonger access my device,burn disks, etc.
Can anyone please help? Thxs in advance....View>Show sidebar
-
After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.
Yes. I just solved the problem on my PC. Here goes...
Issue: My Windows7 computer was producing the pop up box with the error text as you described.
The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
Solution:
1. You need to use the Windows File search feature to look for the name "SQLite". This will quickly locate the offending DLL in the other application.
2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
3. Uninstall Mobile Me.
4. Restart your PC.
5. Reinstall Mobile Me.
6. Mobile Me should sync at this point, but if not, restart the PC once again.
In my case, the offending program was my Aptana Studio development application. I had recently the SQLite3 database to my Ruby On Rails configuration...
This is where the file was located:
C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
I hope this helps,
Ron -
I cannot find apple tv (1st generation) under devices after downloading the latest itunes version
i cannot find apple tv (1st generation) under devices after downloading the latest itunes version.
cannot stream any pictures or music
any suggestions?Welcome to the Apple Community.
If restarting everything including your router doesn't help......
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted. -
After downloading the latest iTunes update, when I open Outlook on my pc, I am getting an error message that MobileMe has encountered a problem and needs to close. What's up with this?
You're welcome.
tt2 -
After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.
I have the same problem and have been fighting with it for several days. I think the last thing that I did before this happened was to let Quicktime update itself. When I open itunes and click on store, the connecting bar gets halfway and then stops. That leaves me with the white store page, if I leave it alone for a bit, I see words as in names of singers and but no pictures.
I have ran the diagnostics and see no problems at all, no event logs in windows, no errors at all. I've un-installed itunes and re-installed but no change. I'm using Norton 360 from comcast. I have windows 7 pro 64 bit. Also, the help in itunes doesn't display.
I put in a ticket with apple and the response I got back basically told me to do what I've already done. I created a new user and have the same issue.
Any help at all will be very much appreciated. I think this started August. 8, 2011.
thanks so much for reading -
Hello,
I'm unable to completely download the latest iphone software verison 5.0.1 with itunes 10.5.2.11, downloading fails with 100kb left (err = -3259). Any suggestion on how to resolve this? I manually cleaned the DNS cached as well as directly connecting my pc to the cable modem instead of the router.Thank you for your response. But unfortunately there's no Apple Genius Bar here in Malaysia. Only resellers, which I feel that they are charging way too much in the first place.
-
After downloading the latest update my pc has no sound at all, can anyone help?
after downloading the latest update my pc has no sound at all, can anyone help?
Try reading the suggestions here: http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
-
After downloading the latest update when I sync my phone my contacts don't appear, help!
After downloading the latest software update I connected my iPhone and afterwards found everything but my contacts transfered over so I don't have my contacts on my phone where I need them! Can anyone help?
It's a problem with Gmail. There is another thread discussing it, but most would rather whine than try to fix it.
Nobody has figured out what is causing it, but there have been various suggestions.
One was to display the All Mail folder if you've hidden it.
You can delete by opt- delete. I think that will delete it immediately.
Another person looked in the user/Library/Mail/V2/ folder. He had duplicate account folders, having a sequence digit suffix. He deleted the duplicates and it fixed things. -
After downloading the latest update I get "an unknown error occurred (-42110)
After downloading the latest update I get "an unknown error occurred (-42110) does anyone have a clue? I can get to the store just fine. Everything seems to be playing fine. The error comes up everytime I load iTunes.
Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting -
I get an error message after downloading the latest itunes update. It says to download only and then to manually install. How do I do this? Or, is there some way to make the download work? Thank you.
The message is 'errors have occurred, go to tools>download only and try installing manually'. BTW, I am using Google Chrome.
-
After downloading the latest update for my Ipod touch, my playlists now go into "shuffle" mode everytime I try to play. I have turned off shuffle on both itunes and my ipod and even tried recreating the playlist and syncing with no luck. I don't know what is causing this, because before the last download, it never happened. Any ideas on how to fix?
Since this is an XP machine, which version of iTunes do you have installed? Is it the latest version?
Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad. -
May I download the latest adobe software on my older Mac 10.7.5?
May I download the latest adobe software on my older Mac 10.7.5
Which Adobe software? (CreatePDF isn't a download, it's a subscription).
Maybe you are looking for
-
Problem in submitting job through Pl/sql
Hi, I have a procedure with parameters as shown below. Pkg1.Proc1(indate date, innum1 number, innum2 number) I am trying to execute this procedure by submitting jobs through another procedure and passing the parameters dynamically. I found the jobs a
-
How can i get my wireless to work on my printer hp officejet pro 8600
how can i get my wireless to work on my printer hp officejet pro 8600
-
Hi all, i have 2 problem with the marketing calendar in PCUI. 1) If I were to click on the Marketing Calendar tab, I am not able to see anything except for My Favorites in the Show dropdown menu. But if I create a campaign, and then click on the Go T
-
I just heard the news and I can't believe it! I don't know what we're gonna do! We are designers and visualists, not developers. Although we are not formally trained in interactive design, from time to time we get jobs that require us to flesh out l
-
KPI's for Telecomunications Industry (Telcos)
Hi! In order to deliver SEM solutions to our top Managment directors, we need to define their strategic KPIs (key performance indicators). I'm looking for samples of KPIs suitable for Telecomunications industry, particularly interested in Investment