After downloading yosemite, can't import photos from camera to iPhoto

After downloading Yosemite  10.10.1 to my Macbook Air, I can't import photos from camera to iPhoto. Had no problem before. It recognizes camera and says loading, but it never does load photos.

That's the latest version.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • Can not import photos from camera to iPhoto

    When I connect my camera to import photos, I get a message with a red stop sign that has an exclamation mark in the center saying, "The disk inserted was not readable by this computer". It then asks if I want to initialize, ignore, or eject the disk.
    I have a Panasonic DMC-FX33 Lumix camera and it worked fine until I updated my Intel Mac Pro to Snow Leopard and iPhoto 09. It still works fine on my Intel laptop that has OSX 10.5.8 and iPhoto 6 (6.0.6).
    Does anyone know the solution to this problem?

    That is a bit odd.
    _Import all the picture off the camera using the other computer (you can transfer them to the other computer later).
    _Using the camera, reformat the media card
    _Take a snap shot and test with the new computer again
    __If it works there was something off in the formatting of the media card

  • Can I import photos from an old iPhoto library?

    Can I import photos from an old iPhoto library on an external hard drive to my current iPhoto library?  The icon on the hard drive appears greyed out when I try via Import.

    Open the older library and export the Photos from it to the Finder (File -> Export) and switch to the new Library and import those.
    Or, use  iPhoto Library Manager to move the photos, plus all the versions and associated metadata to the new Library.
    Regards
    TD

  • How can I import photos from camera to computer?

    The "Get Photos" selection has disappeared from my Elements 9 screen. How can I import photos from my camera to my computer?

    Yes, the entire top bar disappeared. I no longer see the place to click to
    initiate the import, and I don't see the place to select the camera from
    which to import or the place where I used to select a file or create a new
    file in which to save the pictures when they are imported. I clicked
    Organize when I entered the program, but everything looks slightly
    different. What can I do. I certainly don't want to jeopardize over 3,000
    photos installed.
    Thanks.

  • How do i import photos from camera without iPhoto

    how do i import photos from camera without iPhoto

    You can import pictures from the device using Image Capture:
    Connect the iOS device to the computer.
    If Image Capture does not open automatically, you can navigate to your Applications folder and open Image Capture from there.
    Choose the location to which you'd like to import pictures.
    Click Options.
    Click the Options tab if it isn't already selected.
    Enable the option "Delete items from camera after downloading".
    Note: Deleting photos after importing helps to reduce Camera Roll size, and it improves backup and restore times. You may choose Keep Photos if you wish to import the photos to additional computers.
    Click OK.
    Click Download All.
    If you have Aperture, you can use it to import your photos. See the Aperture User Guide for more information.

  • Can't import photos from iphone to iphoto

    I have an iphone 5 and so does my wife. We have an iMac with iphoto version 9.5.1. We have imported photos from our phones to iphoto many times without any problems. After we both updated our phones to iOS 8.1 iphoto will not recognize that our phones are connected to the computer. Finder also does not show that our phones are connected. iTunes still opens automatically and sync's with our phones, but I can't get any photos off our phones.
    I have read several posts in the community and nothing has worked so far.
    I do not see how to find my phone, or any other device, in the preferences in iphoto. iphoto does not automatically open any more when we connect our phones to the computer, but the preferences shows that iphoto should open any time a camera device is connected to the computer.
    Any ideas?

    Hi ..
    You can use the Image Capture app located in your Applications folder to import photos from iOS devices to iPhoto.
    Help here >  Using a camera with your Mac - Apple Support
    iOS devices are not recognized by the Finder.

  • Problem Importing photos from camera to iPhoto

    Help. For a while I had no problems importing photos from my camera now I get the following error message:- /private/var/folders/CC/CC5eraW2GGCddoAX3DUGjE+TM/-Tmp-/iPhoto/PICT1015.JPG
    Does anyone know what this means? What I have done to my computer to cause this? and how to fix it. Thank you.

    Sam
    Welcome to the Apple Discussions.
    Launch Image Capture (in your Apps Folder) and use it to move the pics to the desktop. Then try import from there.
    If that works, then use your camera to reformat your card, and see if that works in the future.
    Regards
    TD

  • Can't import photos from iPhone into iPhoto

    If i try to do a batch import, it says there's a problem downloading an image. If I try to import one image, it says the file is in an recognizable format. It's a jpg.
    Any ideas how I can get my photos and videos off my iPhone and why it won't import?

    When googling the error number, the second and last result (your post is the first) on http://forums.macrumors.com/showthread.php?t=946758&page=8 says :
    "Nevermind, I've tried using image capture and preview to import but i keep getting "The operation couldn't be completed.(com.apple.ImageCaptureCore error-9912.)"
    After doing some digging around i found this old (2006) response from the apple threads:
    REFRESH PHONE
    Hold down the power button and the home button until the Apple appears on the screen, then let go.
    REFRESH SYNC HISTORY
    Find iSync under Applications and Open it.
    On the top menu click on iSync and choose Preferences.
    Under the Advanced Section click on Reset Sync History. (It may appear as nothing happened, but something did in the background, the history was reset)
    Go ahead and close iSync and then try importing your photos with iPhoto again
    It worked like a charm"
    Resetting the Sync history on iSync and soft rebooting the iPhone surprisingly did it for me. I'm not sure it's an universal fix and it's quite cumbersome (I forgot I still had an iSync application on the mac).

  • Can't import photos from camera

    I was downloading some photos from my Digital Rebel XSi with no problems. Then I switched cards and all of a sudden, it wouldn't load the photos. I could still view the photos on the camera, so they were definitely there. It was as if Aperture just didn't want to try to load anything. I opened up iPhoto and Image Capture and it was the same story, they just didn't load the photos. I restarted the computer and opened up Image Capture. This time there was at least a progress bar and a waiting for camera. It did load the photos this time, however I hit Download All, it went to the progress bar and thumbnail display as normal, but it zoomed through all the photos in seconds and didn't actually download anything. Luckily I had turned off "delete from camera after downloading" or I may have lost everything. I plugged the camera into my iBook G4 and downloaded the photos no problem with Image Capture. Both computers are running OS X 10.5.7 and Aperture, iPhoto and RAW compatibility are at their latest versions.

    Try this workflow as described below in an earlier post of mine:
    I feel pretty strongly that card-to-Aperture or camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
    • Remove the memory card from the camera and insert it into a memory card reader. Faster readers and faster cards are preferable.
    • Finder-copy images from memory card to a labeled folder on the intended permanent Masters location hard drive.
    • Eject memory card.
    • Burn backup hard drive or DVD copies of the original images (optional strongly recommended recommended backup step).
    • Eject backup hard drive(s) or DVDs.
    • From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location." This is called "referenced images." During import is the best time to also add keywords, but that is another discussion.
    • Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing in Aperture).
    • Reformat memory card in camera, and archive originals off site on hard drives and/or on DVDs.
    Note that the "eject" steps above are important in order to avoid mistakenly working on removable media/backups.
    Also note with a Referenced-Masters Library that use of the "Vault" backup routine backs up the Library only, not the Masters. Masters should be separately backed up, IMO a good thing from a workflow and data security standpoint.
    HTH
    -Allen Wicks

  • Can't Import Photos from Camera or iPhone

    This is a recent development. For some reason when I plug in my iPhone or my Canon Power Shot I can't load photos I've taken to iPhoto '09. When I switch users and go to my wife's iPhoto on the same computer, i have no problem loading photos with the same camera (she has no trouble with her Phone). I have had to resort to emailing photos from my wife so that I can then manually load them to iPhoto. I can't even use the pull down menu in email to save photos to iPhoto. Any recommendations are greatly appreciated.

    I am having a similar problem. For the last 3 months iPhoto has worked as expected. It automatically starts accessing the pictures from my camera when I plug the USB from the camera into my MacBook. Then I can select which pictures I want to import. The last time I was able to do this function normally was on Sunday of this week.
    Now, however, when I plug the USB into the Mac it does not start to automatically access the pictures. I tried the solutions mentioned in this thread already and they didn't resolve it. When I went to the console, I got the following error message last night:
    10-03-10 10:49:32 PM [0x0-0xe00e].com.apple.iPhoto[117] Face Detecting 3 OKAO_Detection(0x18756370,data=2304-bytes 0x1c64000,48x48) failed with -3
    This morning the error message is:
    10-03-11 6:16:47 AM com.apple.WindowServer[56] Thu Mar 11 06:16:47 MY_NAME'S-MacBook.local WindowServer[56] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    The process works when I plug it into our PC so it must be something I have done to the Mac this week. I had added a program requested by Facebook when I uploaded pictures earlier this week. I thought that might be causing the problem so I deleted it as well as some other programs I had installed for Twitter use. Still having problems.
    Thanks if anyone can help me.

  • Can't import photos from camera -"Insufficient disk space on volume"?

    Please excuse my ignorance if there is a fix for this that I haven't found here.... I reinstalled iLife '11 yesterday because iPhoto would not recognize the camera. Now it recognizes the camera but it won't import the photos. I've tried all the suggestions, trashed the cache, the preference file, restarted, created a new library and I still can't import the photos from the camera to iPhoto because it says "insufficient disk space on volume." I have plenty of space on my hard drive. I can import through Image Capture but why go the extra step when importing to iPhoto was so very easy before? Can anyone help with this?

    This has been reported - not sure if there ever was a solution or not - search the forums to find the threads
    you can try renewing the iPhoto preference file to see if that helps -
    A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
    This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
    LN 

  • Can't import photos from camera using PS 7

    PS 7 will not import photos (have used it for years) ... appears to be trying to force unwelcome Revel conversion.  Is there a way to bypass this? 

    Sounds like your talking about photoshop elements 7?
    If so, you should post over in the photoshop elements forum, since you posted in the full photoshop forum.
    http://forums.adobe.com/community/photoshop_elements

  • After downloading IO6, can't capture photos from Facebook. I get "save photo" instead of "save image".  While browsing, save image comes up and photos save to camera roll.  Seems to be a problem only on FB.

    Downloaded IO6 on my iPhone 4s.  Now I can't capture a photo off Facebook to the camera roll.  When I try, I get a "Save Photo" tab rather than a "Save Image" button,  The photo does not save to camera roll.  For email images and Safari images, "save image" comes up and save to camera roll.  Seems only a problem with images on FB.  Any ideas?  Thanks

    You launched iPhoto and from its Preferences you selected Connecting camera opens.....

  • Can't import photos from camera to UNIX server in Mavericks

    We have a mixed network in our office with a Windows 2008 server and a UNIX server. Before Mavericks, I was able to connect a camera or my iPhone to my MacBook Pro and download jpg files to either server. Since the upgrade to Mavericks, the files are transferred ok to the Windows server, but end up as 0k files on the UNIX box. Using one of the older computers running Snow Leopard, the photos download just fine.
    If I use Image Capture to transfer direct from the camera to the UNIX box, I get no error mesage, but 0k files.
    If I download to the Mac and then copy/paste to the UNIX box, I get the following error message, and no file transfer at all.
    The Finder can’t complete the operation because some data in “P1050238.JPG” can’t be read or written.
    (Error code -36)
    Anybody any idea what is happening, and how to solve this issue?

    That's the latest version.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • How can I import photos from mailbox to iphoto 11

    Hello,
    my wife has been transferring e-mailed photos into a mail box in apple mail.   i'd like to transfer (import) these photos into iphoto 11 but can't find a way to do this.  Can anyone suggest a solution.
    Thanks!

    Perfect!  It appears that I will have to do each photo individually.  Now i just need to figure out how to  get my wife to go through the 600 photos she has placed in the mailbox :-)
    Scott

Maybe you are looking for

  • Firefox 3.6 on Mac - stopped retrieving pages - just says "done" in message bar but no page.

    Now Fixed Thanks. Firefox 3.6 on Mac - I update as available and last version installed about November. Week before Xmas it just stopped retrieving pages - just says "done" in the message bar but no page. I downloaded latest version to reinstall but

  • How to install iLife on an iBook without DVD drive

    Some time ago I bought iLife 8 only to find it was on a single DVD which I could not use on my twin-USB iBook with only a CD drive. Now a friend has suggested that the DVD could perhaps be copied to 6 Cds and loaded that way. Toast has a spanning fac

  • Getting error message only on certain pages

    I am testing Crystal Reports 10 on a windows 2008 platform and getting the following error only on some pages. Usually on first page of a report but sometimes on a later page. When it happens on the first page, the next pages work fine if I scroll th

  • TS3274 ipad mini suddenly lost wi-fi and will no longer reconnect with known networks

    My ipad mini (wi-fi only) suddenly lost wi-fi connection and will no longer reconnect with known networks... Its done it to 2 seperate networks (home and work) which makes me think its the ipad rather than a network problem...?? Ive tried to forget t

  • Dynamic type problem

    I have a dynamic text box call "color.txt" and two Movie clip buttons one called Red and one called Yellow. When I press the button the name of the button is passed to the text box. When I press the second button the name is not replaced. Do I have t